Chuanrun Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chuanrun Li has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Huchuan Wang
117843 Anhui University of Chinese Medicine , Hefei , Anhui , 230012 , China
11 shared publications Shengnan Kong
117843 Anhui University of Chinese Medicine , Hefei , Anhui , 230012 , China
7 shared publicationsYansong Zhang
Anhui Univ Chinese Med, Pharmaceut Engn Technol Res Ctr, Sch Pharm, Hefei 230012, Anhui, Peoples R China
7 shared publicationsZheng Ji
Department of Medicinal Chemistry, School of Pharmacy , 117843 Anhui University of Chinese Medicine , Hefei , Anhui 230012 , People’s Republic of China
7 shared publicationsBangchang Wei
Department of Medicinal Chemistry, School of Pharmacy , 117843 Anhui University of Chinese Medicine , Hefei , Anhui 230012 , People’s Republic of China
5 shared publicationsYa Xu
117843 Anhui University of Chinese Medicine , Hefei , Anhui 230012 , China
5 shared publications
Latest Publications
- 21 January 2026
- Published by Walter de Gruyter GmbH in Tenside Surfactants Detergents
- Vol. 63 (2) , 95-107
Butterfly-layered covalent organic polymers loaded with essential oils of Cyperus rotundus L.
Cyperus rotundus L. essential oil (CEO) was loaded into covalent organic polymer materials (PdIs) and characterized using Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Brunauer-Emmett-Teller theory (BET), and Thermogravimetric Analysis (TG). The main components of CEO were identified as cyperenone (13.43 %), cyperene (10.01 %), α -cyperone (5.83 %), caryophyllene oxide (3.15 %), Zierone (2.97 %), and Cyperene epoxide (2.07 %). The stability of PdIs/CEO was systematically investigated. The antioxidant activities of CEO and PdIs/CEO were evaluated based on their ability to scavenge DPPH and ABTS free radicals. A CCK-8 assay was employed to determine the concentrations of sample, and a lipopolysaccharide (LPS)-induced RAW264.7 cell model was established to assess their anti-inflammatory effects. Both CEO and PdIs/CEO exhibited strong antioxidant activity. They significantly inhibited the production of nitric oxide (NO), interleukin-6 (IL-6), and tumor necrosis factor-alpha (TNF-α). At a concentration of 150 μg/mL, the maximum inhibition rates for TNF-α, and IL-6 reached 91.63 % and 96.23 %, respectively. This study demonstrates that PdIs/CEO has promising potential for applications in food, pharmaceutical, and related fields.
- 21 January 2026
- Published by Walter de Gruyter GmbH in Tenside Surfactants Detergents
- Vol. 63 (2) , 95-107
Butterfly-layered covalent organic polymers loaded with essential oils of Cyperus rotundus L.
Cyperus rotundus L. essential oil (CEO) was loaded into covalent organic polymer materials (PdIs) and characterized using Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Brunauer-Emmett-Teller theory (BET), and Thermogravimetric Analysis (TG). The main components of CEO were identified as cyperenone (13.43 %), cyperene (10.01 %), α -cyperone (5.83 %), caryophyllene oxide (3.15 %), Zierone (2.97 %), and Cyperene epoxide (2.07 %). The stability of PdIs/CEO was systematically investigated. The antioxidant activities of CEO and PdIs/CEO were evaluated based on their ability to scavenge DPPH and ABTS free radicals. A CCK-8 assay was employed to determine the concentrations of sample, and a lipopolysaccharide (LPS)-induced RAW264.7 cell model was established to assess their anti-inflammatory effects. Both CEO and PdIs/CEO exhibited strong antioxidant activity. They significantly inhibited the production of nitric oxide (NO), interleukin-6 (IL-6), and tumor necrosis factor-alpha (TNF-α). At a concentration of 150 μg/mL, the maximum inhibition rates for TNF-α, and IL-6 reached 91.63 % and 96.23 %, respectively. This study demonstrates that PdIs/CEO has promising potential for applications in food, pharmaceutical, and related fields.
- 17 March 2025
- Published by Walter de Gruyter GmbH in Tenside Surfactants Detergents
- Vol. 62 (3) , 322-332
Chitosan/hydroxyapatite biomimetic material loaded with Curcuma longa L. essential oil
In this work, Curcuma longa L. essential oil (CEO) was loaded into the modified chitosan/hydroxyapatite (PMCH) biomimetic material and the PMCH/CEO was characterized by FTIR, SEM, XRD and BET. The main components of CEO were ar-tumerone (21.97 %), ar-curcumene (13.00 %), β-sesquiphellandrene (13.00 %) and curlone (8.57 %), which was analyzed by GC-MS. The stability of PMCH/CEO was investigated at different relative humidities (33 % and 96 %) and temperatures (60 °C and 80 °C) conditions. The ability of CEO and PMCH/CEO to scavenge DPPH radicals and ABTS radicals is used to evaluate the antioxidant acivity. The concentration of the sample was determined by the CCK-8 method, and the lipopolysaccharide-induced RAW264.7 cell inflammation model was established to evaluate the anti-inflammatory effect. CEO and PMCH/CEO showed good antioxidant activity. CEO and PMCH/CEO also had significant inhibitory effects on NO, IL-6 and TNF-α, and the inhibition rates were 85.62 %, 55.82 % and 27.7 %, respectively. This study shows that CEO-loaded PMCH has potential development prospects in food, medicine and other related fields.
- 17 March 2025
- Published by Walter de Gruyter GmbH in Tenside Surfactants Detergents
- Vol. 62 (3) , 322-332
Chitosan/hydroxyapatite biomimetic material loaded with Curcuma longa L. essential oil
In this work, Curcuma longa L. essential oil (CEO) was loaded into the modified chitosan/hydroxyapatite (PMCH) biomimetic material and the PMCH/CEO was characterized by FTIR, SEM, XRD and BET. The main components of CEO were ar-tumerone (21.97 %), ar-curcumene (13.00 %), β-sesquiphellandrene (13.00 %) and curlone (8.57 %), which was analyzed by GC-MS. The stability of PMCH/CEO was investigated at different relative humidities (33 % and 96 %) and temperatures (60 °C and 80 °C) conditions. The ability of CEO and PMCH/CEO to scavenge DPPH radicals and ABTS radicals is used to evaluate the antioxidant acivity. The concentration of the sample was determined by the CCK-8 method, and the lipopolysaccharide-induced RAW264.7 cell inflammation model was established to evaluate the anti-inflammatory effect. CEO and PMCH/CEO showed good antioxidant activity. CEO and PMCH/CEO also had significant inhibitory effects on NO, IL-6 and TNF-α, and the inhibition rates were 85.62 %, 55.82 % and 27.7 %, respectively. This study shows that CEO-loaded PMCH has potential development prospects in food, medicine and other related fields.
- Open Access
- 30 September 2024
- Published by Elsevier in Desalination and Water Treatment
- Vol. 320
Green treatment of turbid traditional Chinese medicine (TCM) wastewater: Optimization of UF-MD coupling process
- 30 September 2024
- Published by Elsevier in Desalination and Water Treatment
- Vol. 320
Open AccessGreen treatment of turbid traditional Chinese medicine (TCM) wastewater: Optimization of UF-MD coupling process
- 12 July 2024
- Published by Walter de Gruyter GmbH in Tenside Surfactants Detergents
- Vol. 61 (5) , 379-384
Removal of indomethacin from water using covalent organic polymers
In recent years, the massive use of pharmaceuticals has led to the detection of a large number of relevant residues in water. As emerging contaminants, pharmaceuticals residues in the environment pose a major threat to human health and ecosystems. Covalent organic polymers (COPs) possess high stability, uniform pore size, and easy functionalization, which have attracted great attention in water treatment. In this study, a novel covalent organic polymer was successfully studied by a simple synthesis method, combining p-phenylenediamine (Pd) and isophthalaldehyde (Is) via a Schiff-base (referred to PdIs-COP), which was used as an absorbent for the removal of indomethacin from aqueous solutions. The composite was characterized with scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) specific surface area and thermogravimetric (TGA) analysis. The effect of changes in the pH values and the adsorption time on the adsorption capacity was also investigated. The results of this study indicated that the absorbent had a high adsorption capacity for indomethacin. The adsorption capacity of PdIs-COP for indomethacin is 92.86 mg g−1 at pH of five and a contact time of 2 min. This shows that PdIs-COP is a novel material with good affinity for pharmaceuticals.
- 12 July 2024
- Published by Walter de Gruyter GmbH in Tenside Surfactants Detergents
- Vol. 61 (5) , 379-384
Removal of indomethacin from water using covalent organic polymers
In recent years, the massive use of pharmaceuticals has led to the detection of a large number of relevant residues in water. As emerging contaminants, pharmaceuticals residues in the environment pose a major threat to human health and ecosystems. Covalent organic polymers (COPs) possess high stability, uniform pore size, and easy functionalization, which have attracted great attention in water treatment. In this study, a novel covalent organic polymer was successfully studied by a simple synthesis method, combining p-phenylenediamine (Pd) and isophthalaldehyde (Is) via a Schiff-base (referred to PdIs-COP), which was used as an absorbent for the removal of indomethacin from aqueous solutions. The composite was characterized with scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) specific surface area and thermogravimetric (TGA) analysis. The effect of changes in the pH values and the adsorption time on the adsorption capacity was also investigated. The results of this study indicated that the absorbent had a high adsorption capacity for indomethacin. The adsorption capacity of PdIs-COP for indomethacin is 92.86 mg g−1 at pH of five and a contact time of 2 min. This shows that PdIs-COP is a novel material with good affinity for pharmaceuticals.
- 1 December 2023
- Published by Walter de Gruyter GmbH in Tenside Surfactants Detergents
- Vol. 61 (1) , 24-34
The preparation of a novel modified chitosan: application to the removal of lead and cephalexin
As a natural, non-toxic adsorbent, chitosan is well suited for the removal of heavy metals and antibiotics. In this study, chitosan was modified with polypropylene glycol and itaconic anhydride to improve the mechanical properties of chitosan, and the polypropylene glycol-itaconic anhydride-chitosan adsorbent was successfully prepared. The adsorbent was characterised and analysed by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis and X-ray photoelectron spectroscopy (XPS). The effects of the different conditions on the adsorption of Pb2+ and cephalexin were investigated. The Langmuir adsorption isotherm model showed that the maximum adsorption capacities of Pb2+ and cephalexin could reach 431.73 mg g−1 and 153.72 mg g−1, respectively. The possible adsorption mechanism of Pb2+ and cephalexin was discussed.
- 1 December 2023
- Published by Walter de Gruyter GmbH in Tenside Surfactants Detergents
- Vol. 61 (1) , 24-34
The preparation of a novel modified chitosan: application to the removal of lead and cephalexin
As a natural, non-toxic adsorbent, chitosan is well suited for the removal of heavy metals and antibiotics. In this study, chitosan was modified with polypropylene glycol and itaconic anhydride to improve the mechanical properties of chitosan, and the polypropylene glycol-itaconic anhydride-chitosan adsorbent was successfully prepared. The adsorbent was characterised and analysed by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis and X-ray photoelectron spectroscopy (XPS). The effects of the different conditions on the adsorption of Pb2+ and cephalexin were investigated. The Langmuir adsorption isotherm model showed that the maximum adsorption capacities of Pb2+ and cephalexin could reach 431.73 mg g−1 and 153.72 mg g−1, respectively. The possible adsorption mechanism of Pb2+ and cephalexin was discussed.
- Open Access
- 1 November 2023
- Published by Elsevier in Desalination and Water Treatment
- Vol. 311, 155-161
Magnetic modified chitosan composites for hexavalent chromium removal
- 1 November 2023
- Published by Elsevier in Desalination and Water Treatment
- Vol. 311, 155-161
Open AccessMagnetic modified chitosan composites for hexavalent chromium removal
- 9 October 2023
- Published by Springer Nature in Journal of Food Measurement and Characterization
- Vol. 18 (1) , 382-392
Preparation and biological studies of chinese propolis essential oil-loaded chitosan/hydroxyapatite biomimetic material
- 9 October 2023
- Published by Springer Nature in Journal of Food Measurement and Characterization
- Vol. 18 (1) , 382-392
Preparation and biological studies of chinese propolis essential oil-loaded chitosan/hydroxyapatite biomimetic material
- Open Access
- 24 August 2023
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (17) , 13174
Bipolar Membrane Electrodialysis for Direct Conversion of L-Ornithine Monohydrochloride to L-Ornithine
In this study, bipolar membrane electrodialysis was proposed to directly convert L-ornithine monohydrochloride to L-ornithine. The stack configuration was optimized in the BP-A (BP, bipolar membrane; A, anion exchange membrane) configuration with the Cl− ion migration through the anion exchange membrane rather than the BP-A-C (C, cation exchange membrane) and the BP-C configurations with the L-ornithine+ ion migration through the cation exchange membrane. Both the conversion ratio and current efficiency follow BP-A > BP-A-C > BP-C, and the energy consumption follows BP-A < BP-A-C < BP-C. Additionally, the voltage drop across the membrane stack (two repeating units) and the feed concentration were optimized as 7.5 V and 0.50 mol/L, respectively, due to the low value of the sum of H+ ions leakage (from the acid compartment to the base compartment) and OH− ions migration (from the base compartment to the acid compartment) through the anion exchange membrane. As a result, high conversion ratio (96.1%), high current efficiency (95.5%) and low energy consumption (0.31 kWh/kg L-ornithine) can be achieved. Therefore, bipolar membrane electrodialysis is an efficient, low energy consumption and environmentally friendly method to directly convert L-ornithine monohydrochloride to L-ornithine.
- 24 August 2023
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (17) , 13174
Open AccessBipolar Membrane Electrodialysis for Direct Conversion of L-Ornithine Monohydrochloride to L-Ornithine
In this study, bipolar membrane electrodialysis was proposed to directly convert L-ornithine monohydrochloride to L-ornithine. The stack configuration was optimized in the BP-A (BP, bipolar membrane; A, anion exchange membrane) configuration with the Cl− ion migration through the anion exchange membrane rather than the BP-A-C (C, cation exchange membrane) and the BP-C configurations with the L-ornithine+ ion migration through the cation exchange membrane. Both the conversion ratio and current efficiency follow BP-A > BP-A-C > BP-C, and the energy consumption follows BP-A < BP-A-C < BP-C. Additionally, the voltage drop across the membrane stack (two repeating units) and the feed concentration were optimized as 7.5 V and 0.50 mol/L, respectively, due to the low value of the sum of H+ ions leakage (from the acid compartment to the base compartment) and OH− ions migration (from the base compartment to the acid compartment) through the anion exchange membrane. As a result, high conversion ratio (96.1%), high current efficiency (95.5%) and low energy consumption (0.31 kWh/kg L-ornithine) can be achieved. Therefore, bipolar membrane electrodialysis is an efficient, low energy consumption and environmentally friendly method to directly convert L-ornithine monohydrochloride to L-ornithine.
- 31 July 2023
- Published by Walter de Gruyter GmbH in Tenside Surfactants Detergents
- Vol. 60 (5) , 450-459
Adsorption of Ni2+ by functionalized hydroxyapatite-chitosan composite
Chitosan and hydroxyapatite are commonly used materials for adsorption. In this work, chitosan was modified by polyethylene glycol and maleic anhydride. Subsequently, a hydroxyapatite-chitosan composite was synthesised by precipitation. The composite was characterised and analysed by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS). Adsorption experiments were used to investigate the effects of external factors such as different pH values, adsorbent dosage, adsorption time and initial nickel ion concentration on the adsorption capacity of Ni2+ and to discuss the mechanism of Ni2+ removal by composites. The results show that the hydroxyapatite-chitosan composite has significant adsorption of Ni2+. The adsorption capacity of the hydroxyapatite-chitosan composite for Ni2+ reaches 63.8 mg g−1. The adsorption process is consistent with the pseudo-second-order kinetic model and the Langmuir isothermal model.
- 31 July 2023
- Published by Walter de Gruyter GmbH in Tenside Surfactants Detergents
- Vol. 60 (5) , 450-459
Adsorption of Ni2+ by functionalized hydroxyapatite-chitosan composite
Chitosan and hydroxyapatite are commonly used materials for adsorption. In this work, chitosan was modified by polyethylene glycol and maleic anhydride. Subsequently, a hydroxyapatite-chitosan composite was synthesised by precipitation. The composite was characterised and analysed by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS). Adsorption experiments were used to investigate the effects of external factors such as different pH values, adsorbent dosage, adsorption time and initial nickel ion concentration on the adsorption capacity of Ni2+ and to discuss the mechanism of Ni2+ removal by composites. The results show that the hydroxyapatite-chitosan composite has significant adsorption of Ni2+. The adsorption capacity of the hydroxyapatite-chitosan composite for Ni2+ reaches 63.8 mg g−1. The adsorption process is consistent with the pseudo-second-order kinetic model and the Langmuir isothermal model.