Xia Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xia Liu has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Jinyang Chen
School of Environmental and Chemical Engineering, Shanghai University, 99 Shangda Road, Shanghai 200444, China
3 shared publications - Haihui Xu
School of Environmental and Chemical Engineering, Shanghai University, 99 Shangda Road, Shanghai 200444, China
2 shared publications - Fangqin Liu
School of Environmental and Chemical Engineering, Shanghai University, 99 Shangda Road, Shanghai 200444, China
1 shared publication - Mingjie Fan
Chemical Engineering and Technology, Shanghai University, Shanghai 200444, China
1 shared publication - Xing Fu
School of Environmental and Chemical Engineering, Shanghai University, 99 Shangda Road, Shanghai 200444, China
1 shared publication
Latest Publications
- Open Access
One-Pot Preparation of Easily Dispersible Hexagonal Mg(OH)2 Modified with THPS and Its Flame-Retardant EVA Copolymer
As an eco-friendly flame-retardant additive, magnesium hydroxide (MH) is widely employed in low-smoking, halogen-free polymer materials due to its environmentally benign nature. In order to enhance flame retardancy performance, the modified MH was modified with tetrakis(hydroxymethyl)phosphonium sulfate (THPS) by a one-pot hydrothermal method. The resulting morphology was characterized using scanning electron microscopy (SEM), and it shows the dispersion of nanometer particles and almost no aggregation. The X-ray photoelectron spectroscopy (XPS) along with Raman spectroscopy show that the THPS is connected with the Mg(OH)2 by chemical bond. The sample was incorporated into ethylene–vinyl acetate (EVA) to evaluate the flame retardancy was assessed via limiting oxygen index (LOI) and vertical burning tests (UL-94). The results show that THPS modified MH effectively enhanced the flame retardancy, achieving a V-0 rating and an LOI value of 31.3%. In addition, the composites retain good mechanical integrity. The thermal analysis with TGA and DTG shows the formation of the MgO decomposition product, along with water vapor and phosphorus-containing radicals released by modified MH in the combustion process, forming a strong flame-retardant protective layer. In addition, the maximum smoke density of EVA/MHP-3 composite was 155.4, lower than 411.3 for EVA/MH, with a 62.2% reduction in total smoke production. The result shows that THPS is effective for improving the flame-retardant efficiency of inorganic metal hydroxide in polymer composites.
Open AccessOne-Pot Preparation of Easily Dispersible Hexagonal Mg(OH)2 Modified with THPS and Its Flame-Retardant EVA Copolymer
As an eco-friendly flame-retardant additive, magnesium hydroxide (MH) is widely employed in low-smoking, halogen-free polymer materials due to its environmentally benign nature. In order to enhance flame retardancy performance, the modified MH was modified with tetrakis(hydroxymethyl)phosphonium sulfate (THPS) by a one-pot hydrothermal method. The resulting morphology was characterized using scanning electron microscopy (SEM), and it shows the dispersion of nanometer particles and almost no aggregation. The X-ray photoelectron spectroscopy (XPS) along with Raman spectroscopy show that the THPS is connected with the Mg(OH)2 by chemical bond. The sample was incorporated into ethylene–vinyl acetate (EVA) to evaluate the flame retardancy was assessed via limiting oxygen index (LOI) and vertical burning tests (UL-94). The results show that THPS modified MH effectively enhanced the flame retardancy, achieving a V-0 rating and an LOI value of 31.3%. In addition, the composites retain good mechanical integrity. The thermal analysis with TGA and DTG shows the formation of the MgO decomposition product, along with water vapor and phosphorus-containing radicals released by modified MH in the combustion process, forming a strong flame-retardant protective layer. In addition, the maximum smoke density of EVA/MHP-3 composite was 155.4, lower than 411.3 for EVA/MH, with a 62.2% reduction in total smoke production. The result shows that THPS is effective for improving the flame-retardant efficiency of inorganic metal hydroxide in polymer composites.
- Open Access
Steam-Assisted Synthesis of Hectorite Loaded with Fe2O3 and Its Catalytic Fenton Degradation of Phenol
Fe2O3 loaded in the interlayer of hectorite was synthesized using a steam-assisted one-pot method to replace the traditional high-temperature and high-pressure hydrothermal method. The samples were characterized by means of X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and N2 adsorption–desorption isotherms. Fe2O3/hectorite had a layered hectorite structure. Due to the insertion of Fe2O3, the interlayer spacing increased and had a large specific surface area and pore size, benefiting catalytic reactions. Fe2O3/hectorite was used as a catalyst to degrade phenol in wastewater via the Fenton reaction. With this catalyst, the optimal Fenton reaction conditions were determined with an orthogonal test: pH, 3; temperature, 60 °C; and catalyst dosage, 0.5 g dm−3. Under these optimal reaction conditions, the degradation rate of phenol (200 mg dm–3) was 99.27% in 3 h. After five cycles, the degradation rate reached 95.72%, indicating the excellent reusability of this catalyst. In the temperature range 303–330 K, the catalytic degradation kinetics were studied as a pseudo-first-order reaction, and the apparent activation energy was 30.71 kJ/mol.
Open AccessSteam-Assisted Synthesis of Hectorite Loaded with Fe2O3 and Its Catalytic Fenton Degradation of Phenol
Fe2O3 loaded in the interlayer of hectorite was synthesized using a steam-assisted one-pot method to replace the traditional high-temperature and high-pressure hydrothermal method. The samples were characterized by means of X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and N2 adsorption–desorption isotherms. Fe2O3/hectorite had a layered hectorite structure. Due to the insertion of Fe2O3, the interlayer spacing increased and had a large specific surface area and pore size, benefiting catalytic reactions. Fe2O3/hectorite was used as a catalyst to degrade phenol in wastewater via the Fenton reaction. With this catalyst, the optimal Fenton reaction conditions were determined with an orthogonal test: pH, 3; temperature, 60 °C; and catalyst dosage, 0.5 g dm−3. Under these optimal reaction conditions, the degradation rate of phenol (200 mg dm–3) was 99.27% in 3 h. After five cycles, the degradation rate reached 95.72%, indicating the excellent reusability of this catalyst. In the temperature range 303–330 K, the catalytic degradation kinetics were studied as a pseudo-first-order reaction, and the apparent activation energy was 30.71 kJ/mol.
- Open Access
- 2 July 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (13) , 1141
One-Pot Synthesis of Cellulose-Based Carbon Aerogel Loaded with TiO2 and g-C3N4 and Its Photocatalytic Degradation of Rhodamine B
A cellulose-based carbon aerogel (CTN) loaded with titanium dioxide (TiO2) and graphitic carbon nitride (g-C3N4) was prepared using sol–gel, freeze-drying, and high-temperature carbonization methods. The formation of the sol–gel was carried out through a one-pot method using refining papermaking pulp, tetrabutyl titanate, and urea as raw materials and hectorite as a cross-linking and reinforcing agent. Due to the cross-linking ability of hectorite, the carbonized aerogel maintained a porous structure and had a large specific surface area with low density (0.0209 g/cm3). The analysis of XRD, XPS, and Raman spectra revealed that the titanium dioxide (TiO2) and graphitic carbon nitride (g-C3N4) were uniformly distributed in the CTN, while TEM and SEM observations demonstrated the uniformly distributed three-dimensional porous structure of CTN. The photocatalytic activity of the CTN was determined according to its ability to degrade rhodamine B. The removal rate reached 89% under visible light after 120 min. In addition, the CTN was still stable after five reuse cycles. The proposed catalyst exhibits excellent photocatalytic performance under visible light conditions.
- 2 July 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (13) , 1141
Open AccessOne-Pot Synthesis of Cellulose-Based Carbon Aerogel Loaded with TiO2 and g-C3N4 and Its Photocatalytic Degradation of Rhodamine B
A cellulose-based carbon aerogel (CTN) loaded with titanium dioxide (TiO2) and graphitic carbon nitride (g-C3N4) was prepared using sol–gel, freeze-drying, and high-temperature carbonization methods. The formation of the sol–gel was carried out through a one-pot method using refining papermaking pulp, tetrabutyl titanate, and urea as raw materials and hectorite as a cross-linking and reinforcing agent. Due to the cross-linking ability of hectorite, the carbonized aerogel maintained a porous structure and had a large specific surface area with low density (0.0209 g/cm3). The analysis of XRD, XPS, and Raman spectra revealed that the titanium dioxide (TiO2) and graphitic carbon nitride (g-C3N4) were uniformly distributed in the CTN, while TEM and SEM observations demonstrated the uniformly distributed three-dimensional porous structure of CTN. The photocatalytic activity of the CTN was determined according to its ability to degrade rhodamine B. The removal rate reached 89% under visible light after 120 min. In addition, the CTN was still stable after five reuse cycles. The proposed catalyst exhibits excellent photocatalytic performance under visible light conditions.