Ning Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ning Wang has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Zhennan Wei
Harbin Institute of Technology
3 shared publications - Changhong Wang
Space Control and Inertial Technology Research Center, Harbin Institute of Technology, Harbin, China
2 shared publications - Guoxing Yi
Harbin Institute of Technology
2 shared publications - Lishan Yuan
Research Center of Space Control and Inertial Technology, Harbin Institute of Technology, Harbin, China
1 shared publication - Qingshuang Zeng
Harbin Institute of Technology
1 shared publication - Ronghao Xie
Space Control and Inertial Technology Research Center, Harbin Institute of Technology, Harbin 150080, China
1 shared publication
Latest Publications
- Open Access
Torque-Dependent Anchor Loss and Fourth-Harmonic Damping Anisotropy in Coriolis Vibratory Gyroscopes
The quality factor (Q) and its circumferential non-uniformity are essential for the resolution and long-term stability of Coriolis vibratory gyroscopes (CVGs). In practice, packaging and mounting anchors introduce torque-dependent and circumferentially non-uniform anchor dissipation, resulting in harmonic damping anisotropy. This paper presents an energy-consistent framework that quantitatively relates the tightening torque to both the mean damping factor and its circumferential harmonic components. A hemispherical resonator gyroscope (HRG) is used for validation, where the dominant component is the fourth harmonic. By decomposing the energy dissipated per cycle, anchor loss is separated into friction loss and radiation loss. The friction channel is modeled using a partial-slip contact energy loss formulation combined with an equivalent tangential impedance coupling description, leading to a torque power-law scaling suitable for parameter identification. The radiation channel is described by an impedance coupling model that captures torque-enhanced anchor stiffness and potential saturation leakage under strong coupling. Controlled torque experiments show that exhibits an almost pure fourth-harmonic dependence on the standing wave orientation for all tested torques. Within the accessible torque range, the mean damping decreases slightly with torque, while the harmonic amplitude increases and the phase progressively converges, supporting a friction-dominated interpretation. The phase convergence further suggests progressive stabilization of the contact state. The proposed approach provides quantitative guidance for torque selection and anchor structure design in resonant gyroscopes.Open AccessTorque-Dependent Anchor Loss and Fourth-Harmonic Damping Anisotropy in Coriolis Vibratory Gyroscopes
The quality factor (Q) and its circumferential non-uniformity are essential for the resolution and long-term stability of Coriolis vibratory gyroscopes (CVGs). In practice, packaging and mounting anchors introduce torque-dependent and circumferentially non-uniform anchor dissipation, resulting in harmonic damping anisotropy. This paper presents an energy-consistent framework that quantitatively relates the tightening torque to both the mean damping factor and its circumferential harmonic components. A hemispherical resonator gyroscope (HRG) is used for validation, where the dominant component is the fourth harmonic. By decomposing the energy dissipated per cycle, anchor loss is separated into friction loss and radiation loss. The friction channel is modeled using a partial-slip contact energy loss formulation combined with an equivalent tangential impedance coupling description, leading to a torque power-law scaling suitable for parameter identification. The radiation channel is described by an impedance coupling model that captures torque-enhanced anchor stiffness and potential saturation leakage under strong coupling. Controlled torque experiments show that exhibits an almost pure fourth-harmonic dependence on the standing wave orientation for all tested torques. Within the accessible torque range, the mean damping decreases slightly with torque, while the harmonic amplitude increases and the phase progressively converges, supporting a friction-dominated interpretation. The phase convergence further suggests progressive stabilization of the contact state. The proposed approach provides quantitative guidance for torque selection and anchor structure design in resonant gyroscopes. - Open Access
Study on the Mechanism of Energy Dissipation in Hemispherical Resonator Gyroscope
The hemispherical resonator gyroscope is a gyroscope based on the principle of Coriolis vibration, widely used in inertial measurement systems of spacecraft. This article decomposes the gyroscope into two parts: the resonator shell and the gyroscope head, establishes the energy dissipation mechanism of the gyroscope, and conducts experimental verification. Firstly, based on the working principle of the gyroscope, a mechanical analysis model of the hemispherical resonator gyroscope head with a resonator spherical shell containing quality defects under second-order vibration state was established. The unbalanced force applied by the resonator spherical shell to the hemispherical resonator gyroscope head was analyzed, and the energy transfer path and dissipation mechanism from the spherical shell to the hemispherical resonator gyroscope head were explained. Finally, through the constructed testing platform, the circumferential quality factor test of the hemispherical resonator gyroscope before and after assembly was completed according to the designed experimental plan, and the consistency between theory and experimental phenomena was verified experimentally.
Open AccessStudy on the Mechanism of Energy Dissipation in Hemispherical Resonator Gyroscope
The hemispherical resonator gyroscope is a gyroscope based on the principle of Coriolis vibration, widely used in inertial measurement systems of spacecraft. This article decomposes the gyroscope into two parts: the resonator shell and the gyroscope head, establishes the energy dissipation mechanism of the gyroscope, and conducts experimental verification. Firstly, based on the working principle of the gyroscope, a mechanical analysis model of the hemispherical resonator gyroscope head with a resonator spherical shell containing quality defects under second-order vibration state was established. The unbalanced force applied by the resonator spherical shell to the hemispherical resonator gyroscope head was analyzed, and the energy transfer path and dissipation mechanism from the spherical shell to the hemispherical resonator gyroscope head were explained. Finally, through the constructed testing platform, the circumferential quality factor test of the hemispherical resonator gyroscope before and after assembly was completed according to the designed experimental plan, and the consistency between theory and experimental phenomena was verified experimentally.
- Open Access
Identification and Compensation Method of Unbalanced Error in Driving Chain for Rate-Integrating Hemispherical Resonator Gyro
The accuracy of the signal within a driving chain for the rate-integrating hemispherical resonator gyro (RI-HRG) plays a crucial role in the overall performance of the gyro. In this paper, a notable and effective method is proposed to realize the identification and compensation of the unbalanced error in the driving chain for the RI-HRG that improved the performance of the multi-loop control applied in the RI-HRG. Firstly, the assembly inclination and eccentricity error of the hemispherical resonator, the inconsistent metal conductive film layer resistance error of the resonator, the coupling error of the driving chain, and the parameter inconsistency error of the circuit components were considered, and the impact of these errors on the multi-loop control applied in the RI-HRG were analyzed. On this basis, the impact was further summarized as the unbalanced error in the driving chain, which included the unbalanced gain error, equivalent misalignment angle, and unbalanced equivalent misalignment angle error. Then, a model between the unbalanced error in the driving chain and a non-ideal precession angular rate was established, which was applicable to both single channel asynchronous control and dual channel synchronous control of the RI-HRG. Further, an unbalanced error identification and compensation method is proposed by utilizing the RI-HRG output with the virtual precession control. Finally, the effectiveness of the proposed method was verified through simulation and experiments in kind. After error compensation, the zero-bias instability of the RI-HRG was improved from 3.0950°/h to 0.0511°/h. The results of experiments in kind demonstrated that the proposed method can effectively suppress the non-ideal angular rate output caused by the unbalanced error in the driving chain for the RI-HRG, thereby further improving the overall performance of the RI-HRG.
Open AccessIdentification and Compensation Method of Unbalanced Error in Driving Chain for Rate-Integrating Hemispherical Resonator Gyro
The accuracy of the signal within a driving chain for the rate-integrating hemispherical resonator gyro (RI-HRG) plays a crucial role in the overall performance of the gyro. In this paper, a notable and effective method is proposed to realize the identification and compensation of the unbalanced error in the driving chain for the RI-HRG that improved the performance of the multi-loop control applied in the RI-HRG. Firstly, the assembly inclination and eccentricity error of the hemispherical resonator, the inconsistent metal conductive film layer resistance error of the resonator, the coupling error of the driving chain, and the parameter inconsistency error of the circuit components were considered, and the impact of these errors on the multi-loop control applied in the RI-HRG were analyzed. On this basis, the impact was further summarized as the unbalanced error in the driving chain, which included the unbalanced gain error, equivalent misalignment angle, and unbalanced equivalent misalignment angle error. Then, a model between the unbalanced error in the driving chain and a non-ideal precession angular rate was established, which was applicable to both single channel asynchronous control and dual channel synchronous control of the RI-HRG. Further, an unbalanced error identification and compensation method is proposed by utilizing the RI-HRG output with the virtual precession control. Finally, the effectiveness of the proposed method was verified through simulation and experiments in kind. After error compensation, the zero-bias instability of the RI-HRG was improved from 3.0950°/h to 0.0511°/h. The results of experiments in kind demonstrated that the proposed method can effectively suppress the non-ideal angular rate output caused by the unbalanced error in the driving chain for the RI-HRG, thereby further improving the overall performance of the RI-HRG.