Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jean Firmino Cardoso has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Vapour pressure deficit control reveals a stable suppression efficiency of modular hexagonal floating covers across advective regimes: a rate-based pan study for semiarid Brazil

    by Jean Firmino Cardoso, Hugo Emanoel Bezerra de Lima, Alexandre Carlos Araújo de Santana, Ivan García-Fornaris, Yelina González Pérez, Hugo Barcelar de Araújo Filho, José Roberto da Silva, Clériston Moura Vieira Júnior, Raquel Milani, Marcelo Metri Corrêa, et al.

    Study region: Semiarid Pernambuco, north-eastern Brazil, where potential evaporation exceeds 2000 mm yr⁻¹. Experiments were conducted at the Department of Nuclear Energy, Federal University of Pernambuco, Recife, using a controlled radiative simulator reproducing regional surface reservoir conditions.Study focus: Modular floating covers can reduce evaporation from small rural reservoirs (açudes), but published suppression efficiencies range widely (55%–85%). To resolve this variance, an instrumented Class A pan with rigid hexagonal plates (74.1% and 77.0% coverage) was evaluated across 15 experimental windows under three advective regimes (0, ~1.9, and 3.2–3.6 m s⁻¹) and irradiances from 106 to 940 W m⁻².New hydrological insights for the region: Apparent drops in suppression efficiency under strong advection (from 71.0% to 55.1%) are artifacts caused by uncorrected diurnal vapour pressure deficit (VPD) variations. Normalizing evaporation by VPD reveals a stable efficiency of 65.6%–68.9% (design recommendation: ~67% for 77% coverage) regardless of wind speed. Absolute water volume saved grows with advection as overall evaporative flux increases. Failing to control for VPD misstates suppression by up to 14 percentage points, providing essential methodological guidance for regional water management.

  • Open Access

    Euler-Lagrange Modeling of Gas-Solid Flow in a Circulating Fluidized Bed Riser: Evaluation and Comparative Analysis

    by Daiane Francisca Do Nascimento Silva, Jean Firmino Cardoso, Fabian Luis Mena de la Noval, Abel Gámez Rodríguez, Yaicel Ge Proenza, Antonio Celso Dantas Antonino, José Miguel Reichert, Daniel Milian Pérez

    Introduction: This study presents the development and evaluation of a Computational Fluid Dynamics (CFD) model utilizing the Euler-Lagrange approach to simulate gas-solid flow within a circulating fluidized bed (CFB) riser. The research aims to enhance the understanding of multiphase dynamics in such systems, addressing limitations of prior Euler-Euler models. Using ANSYS CFX, two types of simulations were performed: initial steady-state simulations were conducted to calibrate and evaluate the models' behavior, followed by transient simulations to investigate the system’s time-dependent dynamics. All simulations were isothermal, modeling air as the continuous phase and Nylon-66 particles as the dispersed phase. Key findings indicate that flow movement is concentrated at the riser's inlet, forming a high-intensity jet, with particle velocities aligning with expected values (0.5-2.0 m/s). Pressure distributions exhibited typical patterns for upward two-phase flows, showing significant drops at the inclined solid inlet and stable conditions in the vertical section. While this modeling approach accurately captured turbulent effects in critical inlet regions, the study acknowledges limitations, including computational time constraints and the exclusion of heat transfer effects. This work significantly contributes to the literature by providing a detailed understanding of two-phase flow in risers and offering a robust, comparated Euler-Lagrange computational model that surmounts the inherent practical and informational limitations of purely experimental investigations, laying a solid foundation for future research and optimization in industrial applications like Fluid Catalytic Cracking (FCC) processes. Objective: This study develops and evaluates an Euler-Lagrange CFD model to simulate gas-solid flow in circulating fluidized bed (CFB) risers. It aims to enhance the understanding of multiphase flow dynamics, address the limitations of Euler-Euler models, and compare the model’s performance against existing numerical data from the literature. Theoretical Framework: The theoretical framework outlines key concepts of multiphase flow, emphasizing the use of cold riser pilot units to simulate industrial reactor behavior. It also presents the fundamentals of Computational Fluid Dynamics (CFD), detailing its methodology, relevant modeling approaches, and its complementary role alongside experimental studies in addressing traditional limitations. Method: This computational study employed ANSYS CFX to perform steady-state, isothermal simulations of gas-solid flow in a vertical riser, modeling air as the continuous phase and Nylon-66 particles as the dispersed phase. The SST turbulence model and coupled interphase interactions were implemented to characterize flow behavior and collect key variables. Results and Discussion: The results showed that flow was concentrated near the riser inlet, forming a high-intensity jet. Particle velocities were within expected ranges, and pressure profiles exhibited typical patterns for upward two-phase flow, including significant drops at the solid inlet and stable values along the riser. The discussion also addressed modeling limitations, such as the absence of thermal effects and computational time constraints. Research Implications: This research contributes to the advancement of multiphase flow modeling in chemical engineering by improving the understanding of gas-solid dynamics in risers. Its implications include supporting industrial process design, complementing experimental studies, and offering a foundation for future numerical and hybrid modeling efforts. Originality/Value: The study’s originality lies in developing and evaluating an Euler-Lagrange CFD model that addresses the limitations of Euler-Euler formulations in capturing particle-scale phenomena. It provides an in-depth computational analysis that advances the understanding of multiphase flow behavior in risers.

  • Open Access

    Irrigação subterrânea: dimensionamento, construção e aplicação de um sistema piloto

    by Daniel Milian Pérez, Abel Gámez Rodríguez, Yaicel Ge Proenza, Antonio Celso Dantas Antonino, Daiane Francisca Do Nascimento Silva, Jean Firmino Cardoso, Yelina González Pérez, Ivan García-Fornaris, Raquel Milani, José Romualdo de Sousa Lima, et al.

    A escassez hídrica no semiárido nordestino brasileiro representa um dos maiores desafios para a sustentabilidade da agricultura regional. Com o objetivo de promover o uso racional da água e garantir maior eficiência no fornecimento hídrico aos cultivos, este artigo apresenta o dimensionamento, construção e aplicação de um sistema piloto de irrigação subterrânea por gotejamento. O sistema foi implantado em escala experimental no Departamento de Energia Nuclear da Universidade Federal de Pernambuco e projetado com base em simulações computacionais hidráulicas. Além da automação com monitoramento remoto, o sistema irriga de acordo com a necessidade da cultura, contribuindo para reduzir desperdícios de água e melhorar a produtividade agrícola, como demonstrado nos testes com a cultura do feijão. A estrutura conta com reservatórios, rede de distribuição, sistema de controle de vazão e elementos de monitoramento em tempo real. Os testes iniciais demonstraram uma boa correspondência entre os valores simulados e os medidos, indicando a viabilidade hidráulica da proposta. O sistema também se destaca por sua autonomia energética, baixo custo e potencial de replicação em pequenas propriedades rurais. Esta solução representa uma alternativa promissora para o enfrentamento do estresse hídrico em áreas vulneráveis, com aplicação tanto prática quanto educativa.

  • Open Access

    Integrated image analysis and statistical modeling for the morphological characterization of porous microstructures

    by Jean Firmino Cardoso, Pedro Pereira de Amorim Neto, Samuel Do Nascimento Pereira Junior, Daiane Francisca Do Nascimento Silva, Abel Gámez Rodríguez, Yaicel Ge Proenza, Daniel Milian Pérez

    This study presents a methodology for the quantitative and spatial characterization of porous materials, grounded in digital image-processing techniques (DIP) and statistical modelling. The proposal stems from the need for methods that are more accessible, scalable, and reproducible than traditional porosimetry and micro-CT approaches. To this end, three-dimensional image sets obtained via X-ray micro-computed tomography are employed. The primary objective is to accurately quantify total porosity, map its spatial distribution, and analyze microstructural descriptors such as connectivity, anisotropy, tortuosity, and pore-size distribution. The workflow integrates pre-processing, binarization with multiple techniques (Otsu, Sauvola, and K-means), morphological operations, and statistical evaluation of the porosity models. Additionally, polynomial regressions and normality tests are applied to assess porosity profiles along the Z-axis. Results reveal significant heterogeneity in porosity and connectivity among the samples, underscoring the importance of a multiscale approach. Evaluated in light of the literature, the methodology shows that outcomes are strongly influenced by the chosen segmentation method and the number of morphological operations applied, yet it provides a faithful representation of porous structures for flow, filtration, and energy-related modelling applications.

  • Open Access

    Pharmaceuticals in water: a bibliometric review of removal technologies, research trends, and socioeconomic factors (2000-2025)

    by Daiane Francisca Do N. Silva, Jean Firmino Cardoso, Daniel Milian Pérez, Abel Gámez Rodríguez, Yaicel Ge Proenza, Antonio Celso Dantas Antonino

    Pharmaceutical contamination in aquatic environments is a growing global concern due to its ecological and public health implications. These compounds, often resistant to conventional treatments, originate from domestic, hospital, and industrial effluents and persist in water bodies. This study presents a bibliometric review of scientific publications from 2000 to 2025, aiming to examine the relationship between pharmaceutical pollution, socioeconomic conditions, and remediation technologies. Data were collected from Scopus and Web of Science using the keywords “removal AND pharmaceuticals AND water”. Duplicate records were removed, and the final dataset was processed using a custom Python script to generate bibliometric visualizations. A three-stage filtering process was applied to identify relevant studies, characterize methodologies, and select articles for full reading. Results show a consistent increase in scientific output over the years, with a notable concentration of research in China, the United States, and Brazil. Adsorption was identified as the most explored technique, often employing activated carbon, biochar, and nanomaterials. Funding trends peaked in 2024, with a slight drop in 2025 due to incomplete data. The findings indicate increasing global engagement with pharmaceutical removal, emphasizing the role of research in addressing both environmental and social inequalities. This review highlights the need for scalable, efficient, and context-sensitive treatment solutions.

  • Open Access

    Análise de Sensibilidade da Umidade do Solo com Hydrus 1D no Município de Garanhuns-PE

    by Eduarda Luciana Larissa de Lima, Jean Firmino Cardoso, Severino Martins dos Santos Neto, Ialy Rayane de Aguiar Costa, Tássia Dos Anjos Tenório de Melo, Artur Paiva Coutinho

    Compreender a dinâmica dos processos hidrológicos que ocorrem no solo, bem como a sensibilidade de cada parâmetro, é essencial para fundamentar ações e tomadas de decisão acerca do uso e manejo do solo e água, contribuindo para a promoção da segurança hídrica para todas as regiões do Brasil. Com base na compreensão de que a disponibilidade de água é limitada, especialmente em regiões semiáridas como a Caatinga, estudos sobre a importância da umidade do solo na regulação dos processos hidrológicos se fazem necessários. Este trabalho apresenta uma análise de sensibilidade dos parâmetros hidrodinâmicos de solos do bioma Caatinga e de pasto no município de Garanhuns/Pernambuco, utilizando o software HYDRUS-1D. Foi realizada uma análise de sensibilidade de alguns parâmetros do solo, como o coeficiente de retenção de água no solo, a condutividade hidráulica saturada (Ks), curva de retenção de água no solo (n) e seu parâmetro alfa (α). Os resultados demonstraram alta sensibilidade para a evapotranspiração acumulada em função do tempo, apresentando variações significativas com as alterações nos parâmetros, principalmente em resposta à disponibilidade de água no solo e à ocorrência de precipitações. Já outras variáveis, como o potencial zona de raízes (hRoot), o escoamento superficial (RunOff), o escoamento superficial acumulado (sum.RunOff), e a infiltração acumulada (sum.Infil), não apresentaram sensibilidade significativa. Constata-se que, algumas variáveis, mesmo considerando pequenas variações, resultam em sensibilidades consideráveis; e o oposto também ocorre; refletindo assim, a relevância do estudo sobre os processos hidrológicos e hidrodinâmicos do solo e como podem ser adotados como estratégia para uma gestão e conservação dos recursos hídricos na região semiárida.

  • Open Access

    CFD Simulations for Filter Layer Optimization: Sensitivity Analysis of Flow Velocity, Particle Size, Roughness, and Particle Rate

    by Daiane Francisca Do Nascimento Silva, João Victor de Barros Felix, Jean Firmino Cardoso, Abel Gámez Rodríguez, Yaicel Ge Proenza, Daniel Milian Pérez, Antonio Celso Dantas Antonino

    Objective: The objective of this study is to examine the sensitivity of particle retention processes in artificial porous media to variations in fluid injection velocity, particle size, injection rate, and surface roughness. Similarly, this investigation contributes to the understanding of the mechanisms governing particle transport and retention, as well as supports the optimization of filtration systems across various applications. Theoretical Framework: The research builds upon the established theories of porous media flow, particle transport, and interfacial phenomena, particularly focusing on the application of Computational Fluid Dynamics (CFD) simulations to the study of particulate matter retention in water. Method: In this work, a sensitivity analysis was conducted using a computational model implemented in ANSYS-CFX software, which allows for the study of water-particle mixture percolation in artificial porous media. The main parameters analyzed included flow velocity, particle size, surface roughness, and injection rate. Prior to simulations, X-ray computed tomography (μCT-XR) was employed to obtain detailed geometric information of the porous media, which was used to generate realistic computational models. Results and Discussion: The results obtained revealed article retention in porous media is influenced by flow velocity, particle size, and media roughness. Higher velocities and larger particles promote deposition. In the discussion section, these results are contextualized in light of the theoretical framework, highlighting the implications and relationships identified. Possible discrepancies and limitations of the study are also considered in this section. Research Implications: These findings provide valuable insights to understand the limits of applicability of computational CFD when applied to the optimization of barrier and filter construction which have significant implications for various applications, such as water filtration, soil contamination, and reservoir engineering. Originality/Value: This study contributes to the literature by providing valuable insights about key factors influencing particle retention. The relevance and value of this research are evident in the potential application of CFD simulations, which, through sensitivity analyses, provide valuable understanding about optimizing filter design and mitigating water contamination.


  • Open Access

    Jucazinho Dam Streamflow Prediction: A Comparative Analysis of Machine Learning Techniques

    by Erickson Johny Galindo da Silva, Artur Paiva Coutinho, Jean Firmino Cardoso, Saulo de Tarso Marques Bezerra

    The centuries-old history of dam construction, from the Saad el-Kafara Dam to global expansion in the 1950s, highlights the importance of these structures in water resource management. The Jucazinho Dam, built in 1998, emerged as a response to the scarcity of water in the Agreste region of Pernambuco, Brazil. After having less than 1% of its water storage capacity in 2016, the dam recovered in 2020 after interventions by the local water utility. In this context, the reliability of influent flow prediction models for dams becomes crucial for managers. This study proposed hydrological models based on artificial intelligence that aim to generate flow series, and we evaluated the adaptability of these models for the operation of the Jucazinho Dam. Data normalization between 0 and 1 was applied to avoid the predominance of variables with high values. The model was based on machine learning and employed support vector regression (SVM), random forest (RF) and artificial neural networks (ANNs), as provided by the Python Sklearn library. The selection of the monitoring stations took place via the Brazilian National Water and Sanitation Agency’s (ANA) HIDROWEB portal, and we used Spearman’s correlation to identify the relationship between precipitation and flow. The evaluation of the performance of the model involved graphical analyses and statistical criteria such as the Nash–Sutcliffe model efficiency coefficient (NSE), the percentage of bias (PBIAS), the coefficient of determination (R2) and the root mean standard deviation ratio (RSR). The results of the statistical coefficients for the test data indicated unsatisfactory performance for long-term predictions (8, 16 and 32 days ahead), revealing a downward trend in the quality of the fit with an increase in the forecast horizon. The SVM model stood out by obtaining the best indices of NSE, PBIAS, R2 and RSR. The graphical results of the SVM models showed underestimation of the flow values with an increase in the forecast horizon due to the sensitivity of the SVM to complex patterns in the time series. On the other hand, the RF and ANN models showed hyperestimation of the flow values as the number of forecast days increased, which was mainly attributed to overfitting. In summary, this study highlights the relevance of artificial intelligence in flow prediction for the efficient management of dams, especially in water scarcity and data-scarce scenarios. A proper choice of models and the ensuring of reliable input data are crucial for obtaining accurate forecasts and can contribute to water security and the effective operation of dams such as Jucazinho.


  • Open Access

    Future Estimation of Hydrometeorological Variables Using Machine Learning Techniques: A Comparative Approach

    by Jean Firmino Cardoso, Erickson Johny Galindo da Silva, Ialy Rayane de Aguiar Costa, Andreia Azevedo Abrantes de Oliveira, Artur Paiva Coutinho, Saulo de Tarso Marques Bezerra

    Objective: The objective of the research was to analyze and compare different machine learning models to identify which technique presents the best performance in predicting hydrometeorological variables. Theoretical Framework: This section presents the main concepts that underpin the work. Machine learning techniques such as support vector machines, decision trees, random forests, artificial neural networks, and gradient boosting are presented, providing a solid foundation for understanding the context of the investigation. Method: The study uses a comparative methodology by applying machine learning techniques to predict hydrometeorological variables based on data collected in Petrolina-PE. Various machine learning techniques were employed and compared. Data normalization was performed through logarithms, and the treatment included filling or excluding inconsistent records. The effectiveness of the models is evaluated using metrics such as the Nash-Sutcliffe efficiency coefficient, Willmott index, and Pearson correlation coefficient. Results and Discussion: The obtained results showed good predictability, ranging from 50 to 70% efficiency. The comparative analysis of the results allowed identifying patterns and relationships between variables and initial configurations of the algorithms, contributing to a better understanding of hydrometeorological processes and their predictability. Research Implications: By providing more accurate and reliable forecasts, the models presented can assist managers in making decisions about the sustainable use of water and the mitigation of natural disasters such as floods. Originality/Value: This study contributes to the literature by advancing the estimation of hydrometeorological variables, improving existing techniques, and providing more accurate data for water resource management. Its impact extends from mitigating risks associated with extreme hydrological events to promoting efficiency in the use of water resources, contributing to the sustainability and resilience of aquatic ecosystems, essential in the face of climate change and environmental challenges.