Ji Yan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ji Yan has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
Feng Wang
China Academy of Engineering Physics
2 shared publicationsXing Zhang
China Academy of Engineering Physics
2 shared publications- Baozhong Mu
MOE Key Laboratory of Advanced Micro-Structured Materials, School of Physics Science and Engineering, Tongji University, 1239 Siping Road, Shanghai 200092, China
1 shared publication - Bo Deng
University of South China, China
1 shared publication Bo Yu
10 China Academy of Engineering Physics Research Center of Laser Fusion, Mianyang, Sichuan, CHINA
1 shared publicationBolun Chen
China Academy of Engineering Physics Research Center of Laser Fusion, Mianyang, Sichuan, CHINA
1 shared publication
Latest Publications
- Open Access
- 1 January 2027
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 76 (1)
Reconstruction of Three-Dimensional Piston Model for Analyzing Implosion Asymmetry Growth
传统空间离散化求解方法制约了三维活塞模型在内爆不对称性分析中的应用。本文采用球谐函数展开方法重构三维活塞模型,将控制方程转化为一组易于求解的常微分方程,并阐明了低阶模不对称性扰动增长与准一维内爆主过程的耦合机制。通过微扰解析解与直接数值模拟结果的交叉验证,确认了模型的可靠性,进而系统揭示了内爆减速和滞止阶段不对称性增长的特性:在滞止时刻,一阶微扰量与初始不对称性种子呈线性关系,二阶微扰量为这些种子的二次函数;自耦合效应可激发类似谐波的偶数模扰动;扰动模式的奇偶性对不对称性的演化和计量均具有显著影响。在此基础上,建立了归一化剩余动能(nRKE)与滞止时刻壳层不对称性因子之间的广义定标关系,为在不同扰动条件下利用中子诊断技术测量nRKE提供理论指导。该工作可为多因素、多模式不对称性增长提供高效且数值稳定的分析工具,并为定量评估非球形内爆的性能退化构建统一框架。
- 1 January 2027
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 76 (1)
Open AccessReconstruction of Three-Dimensional Piston Model for Analyzing Implosion Asymmetry Growth
传统空间离散化求解方法制约了三维活塞模型在内爆不对称性分析中的应用。本文采用球谐函数展开方法重构三维活塞模型,将控制方程转化为一组易于求解的常微分方程,并阐明了低阶模不对称性扰动增长与准一维内爆主过程的耦合机制。通过微扰解析解与直接数值模拟结果的交叉验证,确认了模型的可靠性,进而系统揭示了内爆减速和滞止阶段不对称性增长的特性:在滞止时刻,一阶微扰量与初始不对称性种子呈线性关系,二阶微扰量为这些种子的二次函数;自耦合效应可激发类似谐波的偶数模扰动;扰动模式的奇偶性对不对称性的演化和计量均具有显著影响。在此基础上,建立了归一化剩余动能(nRKE)与滞止时刻壳层不对称性因子之间的广义定标关系,为在不同扰动条件下利用中子诊断技术测量nRKE提供理论指导。该工作可为多因素、多模式不对称性增长提供高效且数值稳定的分析工具,并为定量评估非球形内爆的性能退化构建统一框架。
- 3 April 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (8) , 14356-14376
ICF-PR-Net: a deep phase retrieval neural network for X-ray phase contrast imaging of inertial confinement fusion capsules
X-ray phase contrast imaging (XPCI) has demonstrated capability to characterize inertial confinement fusion (ICF) capsules, and phase retrieval can reconstruct phase information from intensity images. This study introduces ICF-PR-Net, a novel deep learning-based phase retrieval method for ICF-XPCI. We numerically constructed datasets based on ICF capsule shape features, and proposed an object–image loss function to add image formation physics to network training. ICF-PR-Net outperformed traditional methods as it exhibited satisfactory robustness against strong noise and nonuniform background and was well-suited for ICF-XPCI’s constrained experimental conditions and single exposure limit. Numerical and experimental results showed that ICF-PR-Net accurately retrieved the phase and absorption while maintaining retrieval quality in different situations. Overall, the ICF-PR-Net enables the diagnosis of the inner interface and electron density of capsules to address ignition-preventing problems, such as hydrodynamic instability growth.
- 3 April 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (8) , 14356-14376
ICF-PR-Net: a deep phase retrieval neural network for X-ray phase contrast imaging of inertial confinement fusion capsules
X-ray phase contrast imaging (XPCI) has demonstrated capability to characterize inertial confinement fusion (ICF) capsules, and phase retrieval can reconstruct phase information from intensity images. This study introduces ICF-PR-Net, a novel deep learning-based phase retrieval method for ICF-XPCI. We numerically constructed datasets based on ICF capsule shape features, and proposed an object–image loss function to add image formation physics to network training. ICF-PR-Net outperformed traditional methods as it exhibited satisfactory robustness against strong noise and nonuniform background and was well-suited for ICF-XPCI’s constrained experimental conditions and single exposure limit. Numerical and experimental results showed that ICF-PR-Net accurately retrieved the phase and absorption while maintaining retrieval quality in different situations. Overall, the ICF-PR-Net enables the diagnosis of the inner interface and electron density of capsules to address ignition-preventing problems, such as hydrodynamic instability growth.
- Open Access
- 1 January 2023
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 72 (2) , 025201
Improving symmetry tuning with I-raum in indirect-driven implosions
Indirectly driven inertial confinement fusion implosions using a three-step-shaped pulse are performed at a 100 kJ laser facility. At late time of the pulse, deposition of laser energy and distribution of X-ray radiation are significantly disturbed by motion of gold plasma in the original gas-filled cylindrical hohlraum with gold wall. As a result, owing to the lack of X-ray drive at the equator of the capsule, an unacceptable oblate implosion is produced. In the I-raum modified from the above cylindrical hohlraum, the initial positions of outer laser spots and gold bubbles are appropriately shifted to modify the disturbed radiation distribution due to plasma evolution, resulting in a spherically symmetric drive on the capsule. In the implosion shots with almost the same drive pulse, owing to improved symmetry, an spherical hotspot is observed in the new I-raum, and YOS (the ratio of measured neutron yield over simulated one) is up to 30%, while an oblate hotspot is observed in the cylinder, and YOS is only 13%. The simulation calculations and experimental measurements show that the I-raum can be used to significantly reduce the impact of gold bubble expansion in the three-step-shaped pulse driven implosion, which helps to tune the drive and implosion symmetry, and to improve its over-all performance.
- 1 January 2023
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 72 (2) , 025201
Open AccessImproving symmetry tuning with I-raum in indirect-driven implosions
Indirectly driven inertial confinement fusion implosions using a three-step-shaped pulse are performed at a 100 kJ laser facility. At late time of the pulse, deposition of laser energy and distribution of X-ray radiation are significantly disturbed by motion of gold plasma in the original gas-filled cylindrical hohlraum with gold wall. As a result, owing to the lack of X-ray drive at the equator of the capsule, an unacceptable oblate implosion is produced. In the I-raum modified from the above cylindrical hohlraum, the initial positions of outer laser spots and gold bubbles are appropriately shifted to modify the disturbed radiation distribution due to plasma evolution, resulting in a spherically symmetric drive on the capsule. In the implosion shots with almost the same drive pulse, owing to improved symmetry, an spherical hotspot is observed in the new I-raum, and YOS (the ratio of measured neutron yield over simulated one) is up to 30%, while an oblate hotspot is observed in the cylinder, and YOS is only 13%. The simulation calculations and experimental measurements show that the I-raum can be used to significantly reduce the impact of gold bubble expansion in the three-step-shaped pulse driven implosion, which helps to tune the drive and implosion symmetry, and to improve its over-all performance.
- 10 May 2018
- Published by IOP Publishing in Nuclear Fusion
- Vol. 58 (7) , 076020
Preliminary experiments on hohlraum-driven double-shell implosion at the ShenGuang-III laser facility
The double-shell implosion can propose a non-cryogenic target design for the ignition, and provide a robust implosion platform for inertial confinement fusion research. The hohlraum-driven double-shell implosions have been performed on ShenGuang-III laser facility. A vaccum hohlraum with a high CCR value was employed. With 96kJ laser energy in a squared temporal profile, the implosion neutron yield was close to 1010, and the YOC1D was about 27%. The fuel areal density of 14mg/cm2 was inferred from the measured yield ratio of the secondary neutrons and the primary neutrons. The implosion trajectory was diagnosed by the 4.75keV X-ray backlight. The measured implosion velocity and hot-spot X-ray emission history indicated a predictable hydrodynamic process of the double-shell implosion. The implosion symmetry and pusher-gas mix were also two crucial factors which might deteriorate the implosion performance. The loss of 4 driven laser beams in the backlight shot made the YOC1D decreased to 5% and fuel areal density decreased to 4mg/cm2. In future, optimization of the implosion symmetry and the capsule fabrication will be implemented to improve the double-shell implosion performance.
- 10 May 2018
- Published by IOP Publishing in Nuclear Fusion
- Vol. 58 (7) , 076020
Preliminary experiments on hohlraum-driven double-shell implosion at the ShenGuang-III laser facility
The double-shell implosion can propose a non-cryogenic target design for the ignition, and provide a robust implosion platform for inertial confinement fusion research. The hohlraum-driven double-shell implosions have been performed on ShenGuang-III laser facility. A vaccum hohlraum with a high CCR value was employed. With 96kJ laser energy in a squared temporal profile, the implosion neutron yield was close to 1010, and the YOC1D was about 27%. The fuel areal density of 14mg/cm2 was inferred from the measured yield ratio of the secondary neutrons and the primary neutrons. The implosion trajectory was diagnosed by the 4.75keV X-ray backlight. The measured implosion velocity and hot-spot X-ray emission history indicated a predictable hydrodynamic process of the double-shell implosion. The implosion symmetry and pusher-gas mix were also two crucial factors which might deteriorate the implosion performance. The loss of 4 driven laser beams in the backlight shot made the YOC1D decreased to 5% and fuel areal density decreased to 4mg/cm2. In future, optimization of the implosion symmetry and the capsule fabrication will be implemented to improve the double-shell implosion performance.