Nadir Recham
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nadir Recham has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
- Moulay Tahar Sougrati
ICGM
6 shared publications Claude Guéry
Laboratoire de Réactivité et de Chimie des Solides LRCS CNRS UMR 7314 Université de Picardie Jules Verne 80039 Amiens France
3 shared publicationsLaure Monconduit
ICGM Univ. Montpellier CNRS ENSCM 34090 Montpellier France
3 shared publications- Lorenzo Stievano
ICGM, Univ. Montpellier, CNRS, ENSCM
3 shared publications - Tassadit Ouaneche
ICGM, Université Montpellier, CNRS, ENSCM, 34090, Montpellier, France
3 shared publications - Laure Monconduit
ICGM, Université Montpellier, CNRS, ENSCM, 34090, Montpellier, France
2 shared publications
Latest Publications
- Open Access
- 1 July 2025
- Published by Royal Society of Chemistry (RSC) in EES Batteries
- Vol. 1 (5) , 1068-1082
Challenges in the direct lithiation of spent LFP cathodes: the crucial role of reducing agents
The choice of reducing agents is key to restoring spent LFP cathode materials. Options like hydrogen, ascorbic acid, or sugars differ in cost, efficiency, and impact. Their synergy with lithium sources is crucial to scale up cathode regeneration.
- 1 July 2025
- Published by Royal Society of Chemistry (RSC) in EES Batteries
- Vol. 1 (5) , 1068-1082
Open AccessChallenges in the direct lithiation of spent LFP cathodes: the crucial role of reducing agents
The choice of reducing agents is key to restoring spent LFP cathode materials. Options like hydrogen, ascorbic acid, or sugars differ in cost, efficiency, and impact. Their synergy with lithium sources is crucial to scale up cathode regeneration.
- 27 March 2025
- Published by Wiley in Batteries & Supercaps
- Vol. 8 (8)
Revitamize LFP! Ascorbic Acid‐Assisted Direct Regeneration of Spent LiFePO4 for Li‐Ion Batteries
The increasing demand for lithium‐ion batteries (LIBs), primarily driven by the expanding electric vehicle market and the growing need for efficient energy storage, presents both significant opportunities and challenges. The efficient and cost‐effective regeneration of spent LIBs is crucial to minimizing environmental impact and fostering a true circular economy for battery materials. Herein, an innovative one‐step lithiation process is introduced for spent LiFePO4 cathodes, conducted in aqueous solution under ambient conditions. This method utilizes readily available and low‐cost reagents, including a lithium source and ascorbic acid (vitamin C) as a green reducing agent, offering a substantial advantage over traditional techniques that require harsh conditions and complex setups. The lithiation reaction proceeds rapidly, producing pure and fully regenerated LFP. This environmentally friendly process was successfully demonstrated at the scale of 18650 cells with electrodes composed entirely of recycled LFP. These cells exhibit excellent electrochemical performance, even after 1000 cycles at 1C rate, comparable to those made with pristine LFP. By providing a sustainable, cost‐effective, and easily scalable solution for LFP cathode regeneration, the approach supports the closure of the materials loop, contributing to the sustainable management of LIBs and advancing the shift toward a circular economy.
- 27 March 2025
- Published by Wiley in Batteries & Supercaps
- Vol. 8 (8)
Revitamize LFP! Ascorbic Acid‐Assisted Direct Regeneration of Spent LiFePO4 for Li‐Ion Batteries
The increasing demand for lithium‐ion batteries (LIBs), primarily driven by the expanding electric vehicle market and the growing need for efficient energy storage, presents both significant opportunities and challenges. The efficient and cost‐effective regeneration of spent LIBs is crucial to minimizing environmental impact and fostering a true circular economy for battery materials. Herein, an innovative one‐step lithiation process is introduced for spent LiFePO4 cathodes, conducted in aqueous solution under ambient conditions. This method utilizes readily available and low‐cost reagents, including a lithium source and ascorbic acid (vitamin C) as a green reducing agent, offering a substantial advantage over traditional techniques that require harsh conditions and complex setups. The lithiation reaction proceeds rapidly, producing pure and fully regenerated LFP. This environmentally friendly process was successfully demonstrated at the scale of 18650 cells with electrodes composed entirely of recycled LFP. These cells exhibit excellent electrochemical performance, even after 1000 cycles at 1C rate, comparable to those made with pristine LFP. By providing a sustainable, cost‐effective, and easily scalable solution for LFP cathode regeneration, the approach supports the closure of the materials loop, contributing to the sustainable management of LIBs and advancing the shift toward a circular economy.
- Open Access
- 22 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Revitamize LFP! Ascorbic Acid-Assisted Direct Regeneration of Spent LiFePO4 for Li-ion Batteries
The increasing demand for lithium-ion batteries (LIBs), primarily driven by the expanding electric vehicle market and the growing need for efficient energy storage, presents both significant opportunities and challenges. The efficient and cost-effective regeneration of spent LIBs is crucial to minimizing environmental impact and fostering a true circular economy for battery materials. In this study, we introduce an innovative one-step lithiation process for spent LiFePO4 cathodes, conducted in aqueous solution under ambient conditions. This method utilizes readily available and low-cost reagents, including a lithium source and ascorbic acid (vitamin C) as a green reducing agent, offering a substantial advantage over traditional techniques that require harsh conditions and complex setups. The lithiation reaction proceeds rapidly, producing pure and fully regenerated LFP. This environmentally friendly process has been successfully demonstrated at the scale of 18650 cells with electrodes composed entirely of recycled LFP. These cells exhibit excellent electrochemical performance, even after 1000 cycles at 1C rate, comparable to those made with pristine LFP. By providing a sustainable, cost-effective, and easily scalable solution for LFP cathode regeneration, our approach supports the closure of the materials loop, contributing to the sustainable management of LIBs and advancing the shift toward a circular economy.
- 22 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessRevitamize LFP! Ascorbic Acid-Assisted Direct Regeneration of Spent LiFePO4 for Li-ion Batteries
The increasing demand for lithium-ion batteries (LIBs), primarily driven by the expanding electric vehicle market and the growing need for efficient energy storage, presents both significant opportunities and challenges. The efficient and cost-effective regeneration of spent LIBs is crucial to minimizing environmental impact and fostering a true circular economy for battery materials. In this study, we introduce an innovative one-step lithiation process for spent LiFePO4 cathodes, conducted in aqueous solution under ambient conditions. This method utilizes readily available and low-cost reagents, including a lithium source and ascorbic acid (vitamin C) as a green reducing agent, offering a substantial advantage over traditional techniques that require harsh conditions and complex setups. The lithiation reaction proceeds rapidly, producing pure and fully regenerated LFP. This environmentally friendly process has been successfully demonstrated at the scale of 18650 cells with electrodes composed entirely of recycled LFP. These cells exhibit excellent electrochemical performance, even after 1000 cycles at 1C rate, comparable to those made with pristine LFP. By providing a sustainable, cost-effective, and easily scalable solution for LFP cathode regeneration, our approach supports the closure of the materials loop, contributing to the sustainable management of LIBs and advancing the shift toward a circular economy.
- Open Access
- 25 October 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Integration of lithium-ion battery recycling into manufacturing through digitalization: A perspective
The lithium-ion batteries (LIBs) industry has expanded quickly despite technological constraints. Additionally, raw materials supply, end-of-life (EoL) management, and the creation of LIB manufacturing policies are receiving attention. All these concerns could be addressed simultaneously by integrating recycling of EoL cells from the early stages of the LIB manufacturing. This article presents perspectives on how to achieve this holistic integration through the means of digitalization. Various challenges of LIB recycling, and different digitalization tools are discussed, shedding light on the latter’s potential applications and outcomes. Through the use of the discussed tools to create advanced Digital Twins, it would be possible to screen different recycling processing conditions and materials to achieve higher efficiency, increased safety, at a lower cost. In this regard digitalization of LIB recycling process, emerges as the key for achieving a collaborative, sustainable, and efficient battery value chain in the European Union. Lastly, in the view of the growing LIB market, this article is thought to be of interest for recycling stakeholders as they move towards a more circular economy model.
- 25 October 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessIntegration of lithium-ion battery recycling into manufacturing through digitalization: A perspective
The lithium-ion batteries (LIBs) industry has expanded quickly despite technological constraints. Additionally, raw materials supply, end-of-life (EoL) management, and the creation of LIB manufacturing policies are receiving attention. All these concerns could be addressed simultaneously by integrating recycling of EoL cells from the early stages of the LIB manufacturing. This article presents perspectives on how to achieve this holistic integration through the means of digitalization. Various challenges of LIB recycling, and different digitalization tools are discussed, shedding light on the latter’s potential applications and outcomes. Through the use of the discussed tools to create advanced Digital Twins, it would be possible to screen different recycling processing conditions and materials to achieve higher efficiency, increased safety, at a lower cost. In this regard digitalization of LIB recycling process, emerges as the key for achieving a collaborative, sustainable, and efficient battery value chain in the European Union. Lastly, in the view of the growing LIB market, this article is thought to be of interest for recycling stakeholders as they move towards a more circular economy model.
- Open Access
- 28 June 2024
- Published by Wiley in Batteries & Supercaps
- Vol. 7 (10)
Olivine NaMn0.66Fe0.34PO4 as a Cathode Material for Advanced Sodium Ion Batteries
Sodium‐ion batteries continue to rise in the energy storage landscape, their increasing adoption being driven by factors such as cost‐effectiveness and sustainability. As a consequence, there is a growing emphasis on the development of new electrode materials. Among these, olivine phosphates emerge as a promising family of cathode materials. However, viable synthesis routes are still lacking. In this study, cathode materials of olivine NaMn1‐xFexPO4 (x=0.34 and 1) were prepared by directly sodiating Mn1‐xFexPO4 through a solid‐state process at 300 °C. X‐ray diffraction, Mössbauer spectroscopy and electrochemical measurements were employed to study their structural and electrochemical features. NaMn0.66Fe0.34PO4 exhibits two pseudo‐plateaus profile with an average potential of ~3.2 V vs. Na+/Na0 with a reversible capacity reaching 75 mAh/g at C/20 via a monophasic (de)intercalation mechanism. In parallel, the intermediate composition Na0.5Mn0.66Fe0.34PO4 could be prepared via the solid‐state reaction of NaMn0.66Fe0.34PO4 and Mn0.66Fe0.34PO4. Such a solvent‐free sodiation process not only provides a simplified preparation of NMFP, but also offers easy scalability compared to the more laborious electrochemical sodiation route, making it an interesting prospect for future industrialization. Finally, this research confirms that the olivine NMFP is indeed an attractive candidate as a cathode material for SIBs.
- 28 June 2024
- Published by Wiley in Batteries & Supercaps
- Vol. 7 (10)
Open AccessOlivine NaMn0.66Fe0.34PO4 as a Cathode Material for Advanced Sodium Ion Batteries
Sodium‐ion batteries continue to rise in the energy storage landscape, their increasing adoption being driven by factors such as cost‐effectiveness and sustainability. As a consequence, there is a growing emphasis on the development of new electrode materials. Among these, olivine phosphates emerge as a promising family of cathode materials. However, viable synthesis routes are still lacking. In this study, cathode materials of olivine NaMn1‐xFexPO4 (x=0.34 and 1) were prepared by directly sodiating Mn1‐xFexPO4 through a solid‐state process at 300 °C. X‐ray diffraction, Mössbauer spectroscopy and electrochemical measurements were employed to study their structural and electrochemical features. NaMn0.66Fe0.34PO4 exhibits two pseudo‐plateaus profile with an average potential of ~3.2 V vs. Na+/Na0 with a reversible capacity reaching 75 mAh/g at C/20 via a monophasic (de)intercalation mechanism. In parallel, the intermediate composition Na0.5Mn0.66Fe0.34PO4 could be prepared via the solid‐state reaction of NaMn0.66Fe0.34PO4 and Mn0.66Fe0.34PO4. Such a solvent‐free sodiation process not only provides a simplified preparation of NMFP, but also offers easy scalability compared to the more laborious electrochemical sodiation route, making it an interesting prospect for future industrialization. Finally, this research confirms that the olivine NMFP is indeed an attractive candidate as a cathode material for SIBs.
- 22 May 2024
- Published by Elsevier in Energy Storage Materials
- Vol. 70
The art of Lithiation Revisited: Solvent-free room temperature reaction
- 22 May 2024
- Published by Elsevier in Energy Storage Materials
- Vol. 70
The art of Lithiation Revisited: Solvent-free room temperature reaction
- Open Access
- 27 February 2023
- Published by MDPI AG in Microorganisms
- Vol. 11 (3) , 603
Biologically Assisted One-Step Synthesis of Electrode Materials for Li-Ion Batteries
Mn(II)-oxidizing organisms promote the biomineralization of manganese oxides with specific textures, under ambient conditions. Controlling the phases formed and their texture on a larger scale may offer environmentally relevant routes to manganese oxide synthesis, with potential technological applications, for example, for energy storage. In the present study, we sought to use biofilms to promote the formation of electroactive minerals and to control the texture of these biominerals down to the electrode scale (i.e., cm scale). We used the bacterium Pseudomonas putida strain MnB1 which can produce manganese oxide in a biofilm. We characterized the biofilm–mineral assembly using a combination of electron microscopy, synchrotron-based X-ray absorption spectroscopy, X-ray diffraction, thermogravimetric analysis and electron paramagnetic resonance spectroscopy. Under optimized conditions of biofilm growth on the surface of current collectors, mineralogical characterizations revealed the formation of several minerals including a slightly crystalline MnOx birnessite. Electrochemical measurements in a half-cell against Li(0) revealed the electrochemical signature of the Mn4+/Mn3+ redox couple indicating the electroactivity of the biomineralized biofilm without any post-synthesis chemical, physical or thermal treatment. These results provide a better understanding of the properties of biomineralized biofilms and their possible use in designing new routes for one-pot electrode synthesis.
- 27 February 2023
- Published by MDPI AG in Microorganisms
- Vol. 11 (3) , 603
Open AccessBiologically Assisted One-Step Synthesis of Electrode Materials for Li-Ion Batteries
Mn(II)-oxidizing organisms promote the biomineralization of manganese oxides with specific textures, under ambient conditions. Controlling the phases formed and their texture on a larger scale may offer environmentally relevant routes to manganese oxide synthesis, with potential technological applications, for example, for energy storage. In the present study, we sought to use biofilms to promote the formation of electroactive minerals and to control the texture of these biominerals down to the electrode scale (i.e., cm scale). We used the bacterium Pseudomonas putida strain MnB1 which can produce manganese oxide in a biofilm. We characterized the biofilm–mineral assembly using a combination of electron microscopy, synchrotron-based X-ray absorption spectroscopy, X-ray diffraction, thermogravimetric analysis and electron paramagnetic resonance spectroscopy. Under optimized conditions of biofilm growth on the surface of current collectors, mineralogical characterizations revealed the formation of several minerals including a slightly crystalline MnOx birnessite. Electrochemical measurements in a half-cell against Li(0) revealed the electrochemical signature of the Mn4+/Mn3+ redox couple indicating the electroactivity of the biomineralized biofilm without any post-synthesis chemical, physical or thermal treatment. These results provide a better understanding of the properties of biomineralized biofilms and their possible use in designing new routes for one-pot electrode synthesis.
- 3 August 2016
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 163 (10) , A2139-A2148
Iron Phosphate/Bacteria Composites as Precursors for Textured Electrode Materials with Enhanced Electrochemical Properties
An important issue linked to the wide implementation of the Li-ion technology for large scale application deals with the development of eco-efficient synthesis processes for making electrode materials. We report herein the preparation of homogeneous, dense and nanometric layers of amorphous ferric phosphates (a-FePO4·xH2O) using a bacteria (Sporosarcina pasteurii) as nucleating template. By combining various analytical tools (including thermal analyses, Raman and XANES spectroscopies) we show that the the bacterial cell wall plays a key role in the nucleation process thereby controlling particle size and precipitation kinetics. Moreover, we demonstrate that a mild thermal treatment of the bacteria/(a-FePO4·xH2O) core shell structure leads to the decomposition of the insulating bacteria into a carbon-based residue, which is beneficial to the electrode conductivity. This as-prepared material electrochemically reacts with lithium (FeIII / FeII) at a mean voltage of 3.0 Volts (vs. Li+/Li°) with performances (first cycle reversibility, reversible capacity, power efficiency, cycle life) that equal or even overpass those of abiotic a-FePO4·xH2O materials mixed with conductive carbon through harsh or complex procedures. Overall, this bio-templating route represents a soft/cheap alternative to tackle conductivity issues in battery electrode processing.
- 3 August 2016
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 163 (10) , A2139-A2148
Iron Phosphate/Bacteria Composites as Precursors for Textured Electrode Materials with Enhanced Electrochemical Properties
An important issue linked to the wide implementation of the Li-ion technology for large scale application deals with the development of eco-efficient synthesis processes for making electrode materials. We report herein the preparation of homogeneous, dense and nanometric layers of amorphous ferric phosphates (a-FePO4·xH2O) using a bacteria (Sporosarcina pasteurii) as nucleating template. By combining various analytical tools (including thermal analyses, Raman and XANES spectroscopies) we show that the the bacterial cell wall plays a key role in the nucleation process thereby controlling particle size and precipitation kinetics. Moreover, we demonstrate that a mild thermal treatment of the bacteria/(a-FePO4·xH2O) core shell structure leads to the decomposition of the insulating bacteria into a carbon-based residue, which is beneficial to the electrode conductivity. This as-prepared material electrochemically reacts with lithium (FeIII / FeII) at a mean voltage of 3.0 Volts (vs. Li+/Li°) with performances (first cycle reversibility, reversible capacity, power efficiency, cycle life) that equal or even overpass those of abiotic a-FePO4·xH2O materials mixed with conductive carbon through harsh or complex procedures. Overall, this bio-templating route represents a soft/cheap alternative to tackle conductivity issues in battery electrode processing.
- 24 February 2015
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 27 (5) , 1631-1639
Unraveling the Structure of Iron(III) Oxalate Tetrahydrate and Its Reversible Li Insertion Capability
- 24 February 2015
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 27 (5) , 1631-1639
Unraveling the Structure of Iron(III) Oxalate Tetrahydrate and Its Reversible Li Insertion Capability
- 1 November 2013
- Published by Elsevier in Solid State Sciences
- Vol. 25, 28-32
Brønsted acid–base reactions with anhydrous sulfamates as a pathway to [SO3N]3−-containing compounds: Preparation of Li3SO3N
- 1 November 2013
- Published by Elsevier in Solid State Sciences
- Vol. 25, 28-32
Brønsted acid–base reactions with anhydrous sulfamates as a pathway to [SO3N]3−-containing compounds: Preparation of Li3SO3N