S. A. Storozhev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
S. A. Storozhev has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- A. A. Garkushin
Perm National Research Polytechnic University, Perm, Russia
2 shared publications - Alexander Alexandrovich Yuzhakov
St. Petersburg Federal Research Center of the Russian Academy of Sciences
2 shared publications - I. L. Volkhin
Perm State National Research University, Perm, Russia
2 shared publications - Victor V. Krishtop
Perm National Research Polytechnic University, Perm, Russia
2 shared publications - Vyacheslav Nikulin
V. N. Karazin Kharkiv National University, Kharkiv, Ukraine
2 shared publications Yu. N. Khizhnyakov
Perm National Research Polytechnic University, Perm, Russia
2 shared publications
Latest Publications
- 1 December 2025
- Published by Pleiades Publishing Ltd in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 89 (S4) , S568-S577
Using Pulse-Width Modulation to Improve the Efficiency of a Power-over-Fiber System
The problem of low efficiency of power supply systems with energy transmission over optical fiber (Power-over-Fiber, PoF), belonging to the class of optoelectronic devices and systems, is investigated. It is shown that a significant decrease in efficiency occurs in the dynamic mode of operation under varying complex load. To solve this problem, a method based on the use of pulse-width modulation (PWM) of the laser diode pump current is proposed. This method allows maintaining high efficiency of the key system components even when operating at low average power levels. Computer simulation of the system was carried out in the MATLAB Simulink environment using digital twins. It is shown that the transition to the pulsed mode increases the system efficiency by 1–6% in the average optical power range of 0.75–15 W compared to the continuous mode, leveling its value to 12–14% over the entire operating range. The proposed method improves the efficiency and reliability of advanced optoelectronic systems for remote sensing, monitoring, and power supply in challenging electromagnetic and temperature conditions.
- 1 December 2025
- Published by Pleiades Publishing Ltd in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 89 (S4) , S568-S577
Using Pulse-Width Modulation to Improve the Efficiency of a Power-over-Fiber System
The problem of low efficiency of power supply systems with energy transmission over optical fiber (Power-over-Fiber, PoF), belonging to the class of optoelectronic devices and systems, is investigated. It is shown that a significant decrease in efficiency occurs in the dynamic mode of operation under varying complex load. To solve this problem, a method based on the use of pulse-width modulation (PWM) of the laser diode pump current is proposed. This method allows maintaining high efficiency of the key system components even when operating at low average power levels. Computer simulation of the system was carried out in the MATLAB Simulink environment using digital twins. It is shown that the transition to the pulsed mode increases the system efficiency by 1–6% in the average optical power range of 0.75–15 W compared to the continuous mode, leveling its value to 12–14% over the entire operating range. The proposed method improves the efficiency and reliability of advanced optoelectronic systems for remote sensing, monitoring, and power supply in challenging electromagnetic and temperature conditions.
- 21 February 2025
- Published by Volga State University of Technology in Vestnik of Volga State University of Technology. Series Radio Engineering and Infocommunication Systems
- No. 4(64),p. 30-38
Способ фиксации вибрационного акустического излучателя слухового аппарата костного звукопроведения для минимизации потерь звуковой энергии
Статья посвящена исследованию влияния конструкции устройства фиксации вибрационного акустического излучателя на качество звукопередачи в слуховых имплантатах костной проводимости. Разработано устройство для фиксации вибрационного акустического излучателя слухового аппарата костного звукопроведения. Новая конструкция устройства обеспечивает более надёжную фиксацию и снижение потерь звуковой энергии. В результате экспериментальных исследований было показано, что предложенная конструкция позволяет улучшить амплитудно-частотную характеристику и снизить уровень искажений звукового сигнала. Результирующая нелинейность амплитудно-частотной характеристики по итогам измерений предложенной конструкции снизилась более чем на 6 дБ (17 %). Полученные результаты открывают новые перспективы для создания более эффективных и комфортных слуховых имплантатов. Introduction. This paper addresses the pressing challenge of developing effective bone conduction hearing aids. Existing methods for securing vibrating acoustic emitters in such devices have several drawbacks, including unstable connections, sound energy loss, and limited options for individual adjustments. The aim of this study is to design a fixation device for a vibrating acoustic emitter in a bone conduction hearing aid and examine how the pressure connection parameters in the "sound emitter – ear implant" system affect the quality of the transmitted sound. Technical Features of the Fixation Device. A novel fixation device has been developed, incorporating a titanium implant and a polymer ring. This design allows for adjustable pressure between the emitter and the bone, ensuring a secure and stable connection. Additionally, a personalized approach to abutment design—utilizing a parametric computer model created in a three-dimensional design system (such as Compass3D©)—optimizes prosthesis geometry for individual patients. Results. The amplitude-frequency response (AFR) and phase-frequency response (PFR) were measured for two prototype designs: a screw implant with spherical abutments and a screw implant with a vibration-conducting platform. Experimental analysis demonstrated that the proposed innovative fixation method eliminates AFR dips at mid frequencies, which is crucial for speech perception, smooths AFR and PFR curves, resulting in a more natural and balanced sound, reduces AFR nonlinearity by more than 6 dB (17%). Conclusion. The proposed fixation device exhibits high efficiency and significant potential for application in bone conduction hearing aids. Future research will focus on assessing the long-term stability of the system and developing customized solutions tailored to individual patients' needs.
- 21 February 2025
- Published by Volga State University of Technology in Vestnik of Volga State University of Technology. Series Radio Engineering and Infocommunication Systems
- No. 4(64),p. 30-38
Способ фиксации вибрационного акустического излучателя слухового аппарата костного звукопроведения для минимизации потерь звуковой энергии
Статья посвящена исследованию влияния конструкции устройства фиксации вибрационного акустического излучателя на качество звукопередачи в слуховых имплантатах костной проводимости. Разработано устройство для фиксации вибрационного акустического излучателя слухового аппарата костного звукопроведения. Новая конструкция устройства обеспечивает более надёжную фиксацию и снижение потерь звуковой энергии. В результате экспериментальных исследований было показано, что предложенная конструкция позволяет улучшить амплитудно-частотную характеристику и снизить уровень искажений звукового сигнала. Результирующая нелинейность амплитудно-частотной характеристики по итогам измерений предложенной конструкции снизилась более чем на 6 дБ (17 %). Полученные результаты открывают новые перспективы для создания более эффективных и комфортных слуховых имплантатов. Introduction. This paper addresses the pressing challenge of developing effective bone conduction hearing aids. Existing methods for securing vibrating acoustic emitters in such devices have several drawbacks, including unstable connections, sound energy loss, and limited options for individual adjustments. The aim of this study is to design a fixation device for a vibrating acoustic emitter in a bone conduction hearing aid and examine how the pressure connection parameters in the "sound emitter – ear implant" system affect the quality of the transmitted sound. Technical Features of the Fixation Device. A novel fixation device has been developed, incorporating a titanium implant and a polymer ring. This design allows for adjustable pressure between the emitter and the bone, ensuring a secure and stable connection. Additionally, a personalized approach to abutment design—utilizing a parametric computer model created in a three-dimensional design system (such as Compass3D©)—optimizes prosthesis geometry for individual patients. Results. The amplitude-frequency response (AFR) and phase-frequency response (PFR) were measured for two prototype designs: a screw implant with spherical abutments and a screw implant with a vibration-conducting platform. Experimental analysis demonstrated that the proposed innovative fixation method eliminates AFR dips at mid frequencies, which is crucial for speech perception, smooths AFR and PFR curves, resulting in a more natural and balanced sound, reduces AFR nonlinearity by more than 6 dB (17%). Conclusion. The proposed fixation device exhibits high efficiency and significant potential for application in bone conduction hearing aids. Future research will focus on assessing the long-term stability of the system and developing customized solutions tailored to individual patients' needs.
- 1 June 2024
- Published by Pleiades Publishing Ltd in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 88 (6) , 986-990
Intelligent Power Supply System with Power Transmission via Optical Fiber
- 1 June 2024
- Published by Pleiades Publishing Ltd in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 88 (6) , 986-990
Intelligent Power Supply System with Power Transmission via Optical Fiber
- 1 November 2021
- Published by Allerton Press in Russian Electrical Engineering
- Vol. 92 (11) , 650-653
Vector-Matrix Control over a Synchronous Compensator Using a Predicate Fuzzy Voltage Controller
To improve the power supply of industrial enterprises, the efficient use of power lines is required. The active power transmitted through the line is neces
- 1 November 2021
- Published by Allerton Press in Russian Electrical Engineering
- Vol. 92 (11) , 650-653
Vector-Matrix Control over a Synchronous Compensator Using a Predicate Fuzzy Voltage Controller
To improve the power supply of industrial enterprises, the efficient use of power lines is required. The active power transmitted through the line is neces
- 1 November 2020
- Published by Allerton Press in Russian Electrical Engineering
- Vol. 91 (11) , 665-668
Selective Control of a Gas-Turbine Engine
The toolkit of soft computing is based on fuzzy systems, fuzzy neural network models, genetic algorithms, etc., with their strengths and weaknesses. This a
- 1 November 2020
- Published by Allerton Press in Russian Electrical Engineering
- Vol. 91 (11) , 665-668
Selective Control of a Gas-Turbine Engine
The toolkit of soft computing is based on fuzzy systems, fuzzy neural network models, genetic algorithms, etc., with their strengths and weaknesses. This a