Weigang Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Weigang Zhang has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Yongsheng Xu
Department of Engineering Mechanics and Innovation Center for Advanced Ship and Deep-Sea Exploration, School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
5 shared publications - Chuang Ren
Department of Engineering Mechanics and Innovation Center for Advanced Ship and Deep-Sea Exploration, School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
3 shared publications - Wen Jiao Dan
Department of Engineering Mechanics and Innovation Center for Advanced Ship and Deep-Sea Exploration, School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
3 shared publications - Lingchao Xu
Department of Engineering Mechanics, School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
2 shared publications Wenjiao Dan
2 shared publicationsFei Liu
1 shared publication
Latest Publications
- 25 June 2026
- Published by Elsevier in Applied Soft Computing
- Vol. 202
Prediction of Bolt Preload with Friction-Insensitive Model using Auxiliary Task and CNN–GRU-based Framework
- 25 June 2026
- Published by Elsevier in Applied Soft Computing
- Vol. 202
Prediction of Bolt Preload with Friction-Insensitive Model using Auxiliary Task and CNN–GRU-based Framework
- Open Access
The Impact of Structural Units on Copper Grain Boundary–Dislocation Interactions
A molecular dynamics approach was employed to investigate the interaction behavior between tilt-[110] copper grain boundaries (GBs) and dislocations, with particular emphasis on elucidating the role of GB structural unit (SU) types in the mechanisms of dislocation absorption and transmission. The results reveal that singular GBs composed of continuous and uniform B-type or C-type SUs exhibit a pronounced ability to absorb dislocations, whereby incident dislocations are fully absorbed by the GB and prevented from transmitting across it. In contrast, for discrete GBs containing both C SUs and intrinsic stacking fault facets, the dislocation accommodation capacity of the GB is closely related to the number of C SUs within the discrete region. Multiple continuous C SUs can effectively facilitate dislocation absorption and energy dissipation through a synergistic linkage mechanism. This study underscores the critical role of GB SUs in governing GB–dislocation interactions and provides atomic-scale insights into the microstructural regulation mechanisms of GBs during plastic deformation.
Open AccessThe Impact of Structural Units on Copper Grain Boundary–Dislocation Interactions
A molecular dynamics approach was employed to investigate the interaction behavior between tilt-[110] copper grain boundaries (GBs) and dislocations, with particular emphasis on elucidating the role of GB structural unit (SU) types in the mechanisms of dislocation absorption and transmission. The results reveal that singular GBs composed of continuous and uniform B-type or C-type SUs exhibit a pronounced ability to absorb dislocations, whereby incident dislocations are fully absorbed by the GB and prevented from transmitting across it. In contrast, for discrete GBs containing both C SUs and intrinsic stacking fault facets, the dislocation accommodation capacity of the GB is closely related to the number of C SUs within the discrete region. Multiple continuous C SUs can effectively facilitate dislocation absorption and energy dissipation through a synergistic linkage mechanism. This study underscores the critical role of GB SUs in governing GB–dislocation interactions and provides atomic-scale insights into the microstructural regulation mechanisms of GBs during plastic deformation.
- 4 July 2024
- Published by Elsevier in Mechanics of Materials
- Vol. 196
Modeling of Mode I crack-tip dislocation nucleation in three FCC materials: Ni, Cu and Al
- 4 July 2024
- Published by Elsevier in Mechanics of Materials
- Vol. 196
Modeling of Mode I crack-tip dislocation nucleation in three FCC materials: Ni, Cu and Al
- Open Access
Effects of Heterogeneous Microstructures on the Strain Hardening Behaviors of Ferrite-Martensite Dual Phase Steel
The complex strain hardening behaviors of dual phase (DP) steel are subjected to the heterogeneous microstructures. The current work aims to predict the strain hardening behaviors of ferrite-martensite DP steel, focusing on the effects of heterogeneous microstructure on mechanical properties. The flow stress of material was calculated based on the dislocation-based work-hardening model with considering the multi-boundaries hardening. The ferrite-martensite phase boundary percent and grain shape factor were selected as the heterogeneous feature parameters, which were introduced into the new proposed model. The theoretical calculated stress-strain responses were verified with experimental results using the tensile test. The model with the boundary strengthening consideration has more accurate results. The parameter effects of ferrite-ferrite boundary (FFB) spacing, ferrite-martensite boundary (FMB) percent, and grain shape factor on the flow stress-strain curve were researched.
Open AccessEffects of Heterogeneous Microstructures on the Strain Hardening Behaviors of Ferrite-Martensite Dual Phase Steel
The complex strain hardening behaviors of dual phase (DP) steel are subjected to the heterogeneous microstructures. The current work aims to predict the strain hardening behaviors of ferrite-martensite DP steel, focusing on the effects of heterogeneous microstructure on mechanical properties. The flow stress of material was calculated based on the dislocation-based work-hardening model with considering the multi-boundaries hardening. The ferrite-martensite phase boundary percent and grain shape factor were selected as the heterogeneous feature parameters, which were introduced into the new proposed model. The theoretical calculated stress-strain responses were verified with experimental results using the tensile test. The model with the boundary strengthening consideration has more accurate results. The parameter effects of ferrite-ferrite boundary (FFB) spacing, ferrite-martensite boundary (FMB) percent, and grain shape factor on the flow stress-strain curve were researched.
- Open Access
Study of the Mechanical Behavior of Dual-Phase Steel Based on Crystal Plasticity Modeling Considering Strain Partitioning
The similar crystal structures of martensite (BCT) and ferrite (BCC) cause difficulty in distinguishing the grain orientations of individual phases in dual-phase (DP) steels. A dislocation-based multiphase mixed hardening model is presented, considering both ferrite and martensite strain partitioning, to describe the texture-dependent mechanical behavior of DP steels more precisely. This model is based on the ideals that (i) the volume fractions of the constituent phases and the corresponding strain partitioning function are obtained through in situ tensile experimentation, and (ii) the grain orientations of ferrite and martensite are assumed to be in accordance with the overall texture. We applied the model to calculate the macroscopic and microscopic mechanical behavior of DP800 steel using a crystal plasticity finite element (CPFE) code. The results show that the calculated stress-strain response and textural evolution are in good agreement with the experimental results. The dislocation evolution indicates that the rapid hardening of ferrite induces a high hardening rate for DP steels early in plastic deformation. In addition, for the grains corresponding to the texture center orientations of DP800, the activity and dislocation density evolutions of the slip systems are studied.
Open AccessStudy of the Mechanical Behavior of Dual-Phase Steel Based on Crystal Plasticity Modeling Considering Strain Partitioning
The similar crystal structures of martensite (BCT) and ferrite (BCC) cause difficulty in distinguishing the grain orientations of individual phases in dual-phase (DP) steels. A dislocation-based multiphase mixed hardening model is presented, considering both ferrite and martensite strain partitioning, to describe the texture-dependent mechanical behavior of DP steels more precisely. This model is based on the ideals that (i) the volume fractions of the constituent phases and the corresponding strain partitioning function are obtained through in situ tensile experimentation, and (ii) the grain orientations of ferrite and martensite are assumed to be in accordance with the overall texture. We applied the model to calculate the macroscopic and microscopic mechanical behavior of DP800 steel using a crystal plasticity finite element (CPFE) code. The results show that the calculated stress-strain response and textural evolution are in good agreement with the experimental results. The dislocation evolution indicates that the rapid hardening of ferrite induces a high hardening rate for DP steels early in plastic deformation. In addition, for the grains corresponding to the texture center orientations of DP800, the activity and dislocation density evolutions of the slip systems are studied.
- 6 April 2018
- Published by ASME International in Journal of Engineering Materials and Technology
- Vol. 140 (3)
Strain-Hardening Model of Dual-Phase Steel With Geometrically Necessary Dislocations
The strain-hardening behavior of metal during the uniaxial tension can be treated as the competing result of generation and annihilation of statistically stored dislocations (SSDs). Geometrically necessary dislocations (GNDs) are generated to accommodate a lattice mismatch and maintain deformation compatibility in dual-phase (DP) steels because of the heterogeneous deformation of the microstructure. In this study, a dislocation-based strain-hardening model that encompasses GNDs was developed to describe the mechanical properties of dual-phase steel. The GNDs were obtained based on a cell model of uniaxial deformation and the SSDs were calculated using a dynamic recovery model. The strain of each phase is a nonlinear function of the overall material strain obtained by the point-interpolation method (PIM). The proposed strain-hardening model was verified by using commercially produced DP600 steel. The calculated results obtained with GNDs are able to predict more precisely the experimental data than that without. The effects of martensite volume fraction and grain size on the strain-hardening behaviors of individual phases and material were studied.
- 6 April 2018
- Published by ASME International in Journal of Engineering Materials and Technology
- Vol. 140 (3)
Strain-Hardening Model of Dual-Phase Steel With Geometrically Necessary Dislocations
The strain-hardening behavior of metal during the uniaxial tension can be treated as the competing result of generation and annihilation of statistically stored dislocations (SSDs). Geometrically necessary dislocations (GNDs) are generated to accommodate a lattice mismatch and maintain deformation compatibility in dual-phase (DP) steels because of the heterogeneous deformation of the microstructure. In this study, a dislocation-based strain-hardening model that encompasses GNDs was developed to describe the mechanical properties of dual-phase steel. The GNDs were obtained based on a cell model of uniaxial deformation and the SSDs were calculated using a dynamic recovery model. The strain of each phase is a nonlinear function of the overall material strain obtained by the point-interpolation method (PIM). The proposed strain-hardening model was verified by using commercially produced DP600 steel. The calculated results obtained with GNDs are able to predict more precisely the experimental data than that without. The effects of martensite volume fraction and grain size on the strain-hardening behaviors of individual phases and material were studied.
- Open Access
- 1 January 2017
- Published by Elsevier in Procedia Engineering
- Vol. 207, 2089-2094
Research on grain feature parameters based on inhomogeneous plastic deformation in microstructure of ferrite/martensite dual phase steels
- 1 January 2017
- Published by Elsevier in Procedia Engineering
- Vol. 207, 2089-2094
Open AccessResearch on grain feature parameters based on inhomogeneous plastic deformation in microstructure of ferrite/martensite dual phase steels
- Open Access
- 1 January 2014
- Published by Elsevier in Procedia Engineering
- Vol. 81, 1204-1209
Constitutive Model for Multi-phase High Strength Steels
- 1 January 2014
- Published by Elsevier in Procedia Engineering
- Vol. 81, 1204-1209
Open AccessConstitutive Model for Multi-phase High Strength Steels