Sijie He
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sijie He has a total of 121 co-authors. Here are the top co-authors by number of shared publications:
- Feifei Fang
School of Petroleum and Natural Gas Engineering, Chongqing University of Science and Technology, Chongqing 401331, China
10 shared publications - Xizhe Li
Research Institute of Petroleum Exploration and Development, PetroChina, Beijing 100083, China
7 shared publications - Longyi Wang
School of Engineering Science, University of Chinese Academy of Sciences, Beijing 100049, China
4 shared publications - Ya’na Chen
Research Institute of Petroleum Exploration and Development, PetroChina, Beijing 100083, China
4 shared publications - Mengfei Zhou
Institute of Petroleum Exploration and Development, PetroChina Southwest Oil and Gas Field, Chengdu 610056, China
3 shared publications - Nijun Qi
School of Engineering Science, University of Chinese Academy of Sciences, Beijing 100049, China
3 shared publications
Latest Publications
- Open Access
- 18 November 2026
- Published by MDPI AG in Fractal and Fractional
- Vol. 10 (11) , 815
Multiscale Pore Structure Characterization and Fractal Characteristics of Deep Coal Reservoirs: A Case Study from the X Gas Field, Ordos Basin
Deep coal reservoirs develop pore–fracture systems spanning nanometers to micrometers, yet no single technique resolves this full range. This study integrates scanning electron microscopy, high-pressure mercury intrusion, and low-temperature N2 and CO2 adsorption to reconstruct an integrated multiscale accessible pore-size distribution of nine deep coal samples from the X gas field, Ordos Basin. Menger sponge, FHH, and Wang–Li thermodynamic models then quantify the fractal dimensions of the macropore, mesopore, and micropore intervals. Results show that the coals develop organic pores, inorganic pores, and microfractures. Total pore volume ranges from 0.0066 to 0.0335 cm3/g (mean 0.0199 cm3/g) and exhibits a bimodal, high-at-both-ends pattern: the >50 nm fraction and micropores contribute 64.6% and 30.9%, respectively, whereas mesopores supply only 4.5%. Micropores provide 98.9% of the specific surface area (1.43–33.57 m2/g). The mercury-derived fractal dimension DM1 averages 2.50 (the sub-50 nm dimension DM2, uncorrected for matrix compression, is interpreted only as a qualitative upper-bound indicator); the nitrogen-derived D1 and D2 average 2.53 and 2.44; the CO2-derived dimension spans 2.42–2.79 (mean 2.67). Fractal dimensions respond to geological controls in a scale-dependent manner: vitrinite reflectance correlates positively with D(CO2) and D1 but negatively with D2, and ash yield correlates positively with D(CO2). These findings quantify multiscale pore heterogeneity and, when integrated with permeability, gas-content and geomechanical data, may assist sweet-spot selection and stimulation design in deep coalbed methane reservoirs.
- 18 November 2026
- Published by MDPI AG in Fractal and Fractional
- Vol. 10 (11) , 815
Open AccessMultiscale Pore Structure Characterization and Fractal Characteristics of Deep Coal Reservoirs: A Case Study from the X Gas Field, Ordos Basin
Deep coal reservoirs develop pore–fracture systems spanning nanometers to micrometers, yet no single technique resolves this full range. This study integrates scanning electron microscopy, high-pressure mercury intrusion, and low-temperature N2 and CO2 adsorption to reconstruct an integrated multiscale accessible pore-size distribution of nine deep coal samples from the X gas field, Ordos Basin. Menger sponge, FHH, and Wang–Li thermodynamic models then quantify the fractal dimensions of the macropore, mesopore, and micropore intervals. Results show that the coals develop organic pores, inorganic pores, and microfractures. Total pore volume ranges from 0.0066 to 0.0335 cm3/g (mean 0.0199 cm3/g) and exhibits a bimodal, high-at-both-ends pattern: the >50 nm fraction and micropores contribute 64.6% and 30.9%, respectively, whereas mesopores supply only 4.5%. Micropores provide 98.9% of the specific surface area (1.43–33.57 m2/g). The mercury-derived fractal dimension DM1 averages 2.50 (the sub-50 nm dimension DM2, uncorrected for matrix compression, is interpreted only as a qualitative upper-bound indicator); the nitrogen-derived D1 and D2 average 2.53 and 2.44; the CO2-derived dimension spans 2.42–2.79 (mean 2.67). Fractal dimensions respond to geological controls in a scale-dependent manner: vitrinite reflectance correlates positively with D(CO2) and D1 but negatively with D2, and ash yield correlates positively with D(CO2). These findings quantify multiscale pore heterogeneity and, when integrated with permeability, gas-content and geomechanical data, may assist sweet-spot selection and stimulation design in deep coalbed methane reservoirs.
- Open Access
- 28 July 2026
- Published by Elsevier in Energy Reports
- Vol. 16
A hybrid MLP-CNN-transformer architecture for high-accuracy dynamic production forecasting in shale oil
- 28 July 2026
- Published by Elsevier in Energy Reports
- Vol. 16
Open AccessA hybrid MLP-CNN-transformer architecture for high-accuracy dynamic production forecasting in shale oil
- Open Access
Water Influx Behavior and CO2 Injection for Water Control and Production Enhancement in Vertically Heterogeneous Gas Reservoirs
In heterogeneous edge-water carbonate gas reservoirs during the middle-to-late development stage, edge-water invasion and pressure depletion significantly compromise production stability and gas recovery. To investigate water invasion behavior under permeability heterogeneity and evaluate the effectiveness of CO2 injection for water control and enhanced gas recovery, a series of long-core depletion experiments and three-dimensional vertically heterogeneous physical-model experiments were conducted based on representative reservoir conditions. The results show that permeability contrast plays a key role in governing water breakthrough timing and gas production performance. High-permeability cores experience earlier water breakthrough but contribute higher overall recovery, whereas low-permeability cores exhibit delayed depletion and pronounced production decline after breakthrough due to large pressure differentials. In multilayer commingled production, interlayer pressure imbalance drives fluid crossflow from low- and medium-permeability zones toward high-permeability zones, leading to premature water breakthrough, delayed layer activation, and the development of water-blocked gas zones, thereby intensifying interlayer heterogeneity. After depletion, CO2 injection effectively modifies fluid flow pathways and improves reservoir connectivity. Through gravity-assisted displacement and energy replenishment, CO2 mitigates water invasion, reconnects previously isolated gas zones, and enhances overall reservoir utilization. The findings demonstrate that CO2 injection provides a dual benefit in both water control and production enhancement, offering valuable insights for improving recovery strategies in heterogeneous edge-water gas reservoirs.
Open AccessWater Influx Behavior and CO2 Injection for Water Control and Production Enhancement in Vertically Heterogeneous Gas Reservoirs
In heterogeneous edge-water carbonate gas reservoirs during the middle-to-late development stage, edge-water invasion and pressure depletion significantly compromise production stability and gas recovery. To investigate water invasion behavior under permeability heterogeneity and evaluate the effectiveness of CO2 injection for water control and enhanced gas recovery, a series of long-core depletion experiments and three-dimensional vertically heterogeneous physical-model experiments were conducted based on representative reservoir conditions. The results show that permeability contrast plays a key role in governing water breakthrough timing and gas production performance. High-permeability cores experience earlier water breakthrough but contribute higher overall recovery, whereas low-permeability cores exhibit delayed depletion and pronounced production decline after breakthrough due to large pressure differentials. In multilayer commingled production, interlayer pressure imbalance drives fluid crossflow from low- and medium-permeability zones toward high-permeability zones, leading to premature water breakthrough, delayed layer activation, and the development of water-blocked gas zones, thereby intensifying interlayer heterogeneity. After depletion, CO2 injection effectively modifies fluid flow pathways and improves reservoir connectivity. Through gravity-assisted displacement and energy replenishment, CO2 mitigates water invasion, reconnects previously isolated gas zones, and enhances overall reservoir utilization. The findings demonstrate that CO2 injection provides a dual benefit in both water control and production enhancement, offering valuable insights for improving recovery strategies in heterogeneous edge-water gas reservoirs.
- Open Access
- 18 June 2026
- Published by MDPI AG in Fractal and Fractional
- Vol. 10 (6) , 417
NMR and Multifractal Characterization of Pore Heterogeneity in Transitional-Marine Shales: A Case Study from the Longtan Formation, Sichuan Basin
Transitional marine–continental shale reservoirs are typified by intricate pore architectures and pronounced heterogeneity; accurate characterization of their pore network and fluid mobility underpins reservoir appraisal and sweet-spot forecasting. Focusing on the Longtan Formation transitional shales in the Sichuan Basin, this study integrates NMR T2 spectrometry, geochemical–mineralogical assays and multifractal analysis to elucidate multi-scale heterogeneity of the pore framework and its governing mechanisms. Results reveal that the investigated shales are characterized by low porosity (0.46–7.43%) and high bound fluid saturation (66.77–97.28%). Multifractal spectral width (Δα) and degree of multifractality (ΔD) serve as robust metrics of pore heterogeneity, correlating closely with rock composition (e.g., TOC and clay content). By combining multifractal indices, mineralogical assemblage and fluid movability, the samples are classified into three reservoir archetypes, with Type I (weakly heterogeneous—high quality) identified as the prospective developmental sweet spot. This work provides a theoretical and methodological backbone for quality assessment and play-ranking of transitional marine–continental shale reservoirs.
- 18 June 2026
- Published by MDPI AG in Fractal and Fractional
- Vol. 10 (6) , 417
Open AccessNMR and Multifractal Characterization of Pore Heterogeneity in Transitional-Marine Shales: A Case Study from the Longtan Formation, Sichuan Basin
Transitional marine–continental shale reservoirs are typified by intricate pore architectures and pronounced heterogeneity; accurate characterization of their pore network and fluid mobility underpins reservoir appraisal and sweet-spot forecasting. Focusing on the Longtan Formation transitional shales in the Sichuan Basin, this study integrates NMR T2 spectrometry, geochemical–mineralogical assays and multifractal analysis to elucidate multi-scale heterogeneity of the pore framework and its governing mechanisms. Results reveal that the investigated shales are characterized by low porosity (0.46–7.43%) and high bound fluid saturation (66.77–97.28%). Multifractal spectral width (Δα) and degree of multifractality (ΔD) serve as robust metrics of pore heterogeneity, correlating closely with rock composition (e.g., TOC and clay content). By combining multifractal indices, mineralogical assemblage and fluid movability, the samples are classified into three reservoir archetypes, with Type I (weakly heterogeneous—high quality) identified as the prospective developmental sweet spot. This work provides a theoretical and methodological backbone for quality assessment and play-ranking of transitional marine–continental shale reservoirs.
- Open Access
Fractal Characteristics of Pore Structure and Their Controlling Factors in Marine–Terrestrial Transitional Deep Coal-Bearing Shale: A Case Study of the Longtan Formation in Central Sichuan Basin
Currently, pore fractal characteristics of deep marine–terrestrial transitional coal-measure mudstones in the central Sichuan Basin remain poorly understood. To clarify the pore fractal characteristics and their controlling factors, seven representative deep mudstone samples were collected from the Longtan Formation of Well NT1H in the Suining area, central Sichuan Basin. These samples were subjected to total organic carbon (TOC) content determination, vitrinite reflectance (Ro) measurement, X-ray diffraction (XRD) analysis of whole-rock and clay minerals, and low-pressure nitrogen adsorption (LPN2A) experiments. Pore fractal dimensions were calculated based on the Frenkel–Halsey–Hill (FHH) theoretical model. The influences of mineral composition, organic geochemical characteristics, and pore structural parameters on pore fractal dimensions were analyzed. The results indicate that shale pores in the study area are predominantly developed as mesopores, exhibiting dual fractal characteristics; fractal dimension D1 (structural fractal dimension at high-pressure segment) ranges from 2.6662 to 2.7366, and fractal dimension D2 (surface fractal dimension at low-pressure segment) ranges from 2.5895 to 2.6363. Mineral composition exerts differential control over pore fractal dimensions. The effects of organic matter content and thermal evolution degree on fractal dimensions exhibit stage-dependent characteristics. Correlations between pore structural parameters and fractal dimensions indicate that small-aperture pores (micropores and mesopores) constitute the primary factor controlling pore heterogeneity in shales. These findings provide a theoretical basis for “reservoir evaluation” and “sweet spot” optimization of deep marine–terrestrial transitional coal-measure shales in central Sichuan Basin.
Open AccessFractal Characteristics of Pore Structure and Their Controlling Factors in Marine–Terrestrial Transitional Deep Coal-Bearing Shale: A Case Study of the Longtan Formation in Central Sichuan Basin
Currently, pore fractal characteristics of deep marine–terrestrial transitional coal-measure mudstones in the central Sichuan Basin remain poorly understood. To clarify the pore fractal characteristics and their controlling factors, seven representative deep mudstone samples were collected from the Longtan Formation of Well NT1H in the Suining area, central Sichuan Basin. These samples were subjected to total organic carbon (TOC) content determination, vitrinite reflectance (Ro) measurement, X-ray diffraction (XRD) analysis of whole-rock and clay minerals, and low-pressure nitrogen adsorption (LPN2A) experiments. Pore fractal dimensions were calculated based on the Frenkel–Halsey–Hill (FHH) theoretical model. The influences of mineral composition, organic geochemical characteristics, and pore structural parameters on pore fractal dimensions were analyzed. The results indicate that shale pores in the study area are predominantly developed as mesopores, exhibiting dual fractal characteristics; fractal dimension D1 (structural fractal dimension at high-pressure segment) ranges from 2.6662 to 2.7366, and fractal dimension D2 (surface fractal dimension at low-pressure segment) ranges from 2.5895 to 2.6363. Mineral composition exerts differential control over pore fractal dimensions. The effects of organic matter content and thermal evolution degree on fractal dimensions exhibit stage-dependent characteristics. Correlations between pore structural parameters and fractal dimensions indicate that small-aperture pores (micropores and mesopores) constitute the primary factor controlling pore heterogeneity in shales. These findings provide a theoretical basis for “reservoir evaluation” and “sweet spot” optimization of deep marine–terrestrial transitional coal-measure shales in central Sichuan Basin.
- Open Access
New Insights of Stress Sensitivity Experiment in the Kuqa Deep Gas Reservoir
In order to reveal the stress sensitivity characteristics of the Kuqa deep gas reservoir, this study investigates the problem from two complementary aspects. First, conventional variable confining pressure experiments and well-test interpretation are employed to clarify the basic stress sensitivity characteristics of the Kela 2 gas field under conditions of monotonically increasing effective stress. Second, considering that field operations such as gas injection and temperature rise may cause periodic pore-pressure fluctuations under nearly constant overburden pressure, this paper establishes a novel physical simulation method for multi-round charging and depletion recovery to investigate the additional reservoir responses under cyclic effective-stress evolution. The results show that (1) when the confining pressure increases from 5 MPa~40 MPa, the permeability of the core generally decreases, with a decrease of 5~85%. In contrast, the porosity decreased by only 2% to 12%. The number of cores with conventional air permeability greater than or equal to 1 mD in the Kela 2 gas field reservoir accounts for 63.4%. The stress sensitivity causes the permeability to decrease by less than or equal to 40%, and the overall stress sensitivity is not strong. (2) Post-test observations showed fracture development in some cores after the experiment, indicating that during the gas reservoir mining process, the stress cycle changes will cause some closed cracks in the core to reopen or produce new cracks, which will play a role in increasing permeability. After the crack is opened, the comprehensive recovery degree at the end of the stable production period increases by 21.7 percentage points, and 9.9 percentage points increase the comprehensive recovery degree at the end of the abandoned production. (3) The new understanding of this experiment has changed the traditional understanding that stress sensitivity can only lead to reservoir damage, and also pointed out a new technical direction for the field to improve reservoir physical properties and enhance oil recovery by changing stress effects such as heating-condensation, intermittent gas injection, and directional blasting.
Open AccessNew Insights of Stress Sensitivity Experiment in the Kuqa Deep Gas Reservoir
In order to reveal the stress sensitivity characteristics of the Kuqa deep gas reservoir, this study investigates the problem from two complementary aspects. First, conventional variable confining pressure experiments and well-test interpretation are employed to clarify the basic stress sensitivity characteristics of the Kela 2 gas field under conditions of monotonically increasing effective stress. Second, considering that field operations such as gas injection and temperature rise may cause periodic pore-pressure fluctuations under nearly constant overburden pressure, this paper establishes a novel physical simulation method for multi-round charging and depletion recovery to investigate the additional reservoir responses under cyclic effective-stress evolution. The results show that (1) when the confining pressure increases from 5 MPa~40 MPa, the permeability of the core generally decreases, with a decrease of 5~85%. In contrast, the porosity decreased by only 2% to 12%. The number of cores with conventional air permeability greater than or equal to 1 mD in the Kela 2 gas field reservoir accounts for 63.4%. The stress sensitivity causes the permeability to decrease by less than or equal to 40%, and the overall stress sensitivity is not strong. (2) Post-test observations showed fracture development in some cores after the experiment, indicating that during the gas reservoir mining process, the stress cycle changes will cause some closed cracks in the core to reopen or produce new cracks, which will play a role in increasing permeability. After the crack is opened, the comprehensive recovery degree at the end of the stable production period increases by 21.7 percentage points, and 9.9 percentage points increase the comprehensive recovery degree at the end of the abandoned production. (3) The new understanding of this experiment has changed the traditional understanding that stress sensitivity can only lead to reservoir damage, and also pointed out a new technical direction for the field to improve reservoir physical properties and enhance oil recovery by changing stress effects such as heating-condensation, intermittent gas injection, and directional blasting.
- Open Access
- 5 April 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Pore structure of deep high-rank coal and its impact on coalbed methane adsorption: a case study of the Daning-Jixian block, Eastern Ordos Basin
The pore structure of deep coal reservoirs is the key to evaluating the potential of coalbed methane resources and optimizing the development strategy. In this study, the 8# coal sample of Benxi Formation in the DJ57 well of the Daning-Jixian block in the eastern margin of the Ordos Basin was taken as the research object. Based on the microscopic components and industrial analysis, the multi-scale quantitative characterization of nano-scale pores was conducted by using CO2 and N2 adsorption experiments. On this basis, the V-S (Volume-Specific Surface Area) and FHH (Frenkel Halsey Hill) fractal models were used to reveal the multi-scale fractal characteristics of pores. Combined with the CH4 isothermal adsorption experiment, the main controlling factors affecting the CH4 adsorption gas content were systematically discussed. The results show that: (1) The thermal evolution degree of deep coal in the study area is high, and the whole is in the stage of high rank coal (the average Ro, max is 2.44%). The material composition of coal rock is mainly vitrinite (average content is 81.0%), inertinite, and mineral group content is 12.5% and 6.5%, respectively. Industrial analysis shows that it has the characteristics of low moisture (the average Mad is 0.97%), low ash (the average Aad is 21.7%), low volatile (the average Vad is 7.36%), and high fixed carbon (the average FCad is 69.95%). (2) The micropores are highly developed, with an average CO₂ adsorption capacity of 17.52 cm³/g. The average total micropore volume and specific surface area are 0.05301 cm³/g and 180.57 m²/g, respectively. The pore morphology is primarily composed of cylindrical pores with openings at both ends and flat slit shaped pores with open cylindrical on all sides. (3) The coal samples exhibit strong CH₄ adsorption capacity, with an average Langmuir volume (VL) of 28.77 cm³/g. (4) The fractal characteristics of multi-scale pores are significant. The average pore fractal dimension (DC) based on CO2 adsorption is 2.4686, and the average pore surface fractal dimension (DN−1) and pore structure fractal dimension (DN−2) based on N2 adsorption are 2.5943 and 2.7202, respectively. (5) The degree of thermal evolution, material composition, pore structure, and heterogeneity of coal rock jointly control the CH4 adsorption capacity. With the increase of Ro, max, the content of vitrinite and the proportion of micropores increase, and the complexity and heterogeneity of pore structure increase, providing more CH4 adsorption sites, thus improving the adsorption capacity. There is a strong positive correlation between VL and DC, and DC can be used as a key parameter to evaluate the adsorbed gas content of deep coal in the study area. The research results have theoretical guiding significance for deep coalbed methane resource evaluation, “sweet spot” identification, and efficient development.
- 5 April 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessPore structure of deep high-rank coal and its impact on coalbed methane adsorption: a case study of the Daning-Jixian block, Eastern Ordos Basin
The pore structure of deep coal reservoirs is the key to evaluating the potential of coalbed methane resources and optimizing the development strategy. In this study, the 8# coal sample of Benxi Formation in the DJ57 well of the Daning-Jixian block in the eastern margin of the Ordos Basin was taken as the research object. Based on the microscopic components and industrial analysis, the multi-scale quantitative characterization of nano-scale pores was conducted by using CO2 and N2 adsorption experiments. On this basis, the V-S (Volume-Specific Surface Area) and FHH (Frenkel Halsey Hill) fractal models were used to reveal the multi-scale fractal characteristics of pores. Combined with the CH4 isothermal adsorption experiment, the main controlling factors affecting the CH4 adsorption gas content were systematically discussed. The results show that: (1) The thermal evolution degree of deep coal in the study area is high, and the whole is in the stage of high rank coal (the average Ro, max is 2.44%). The material composition of coal rock is mainly vitrinite (average content is 81.0%), inertinite, and mineral group content is 12.5% and 6.5%, respectively. Industrial analysis shows that it has the characteristics of low moisture (the average Mad is 0.97%), low ash (the average Aad is 21.7%), low volatile (the average Vad is 7.36%), and high fixed carbon (the average FCad is 69.95%). (2) The micropores are highly developed, with an average CO₂ adsorption capacity of 17.52 cm³/g. The average total micropore volume and specific surface area are 0.05301 cm³/g and 180.57 m²/g, respectively. The pore morphology is primarily composed of cylindrical pores with openings at both ends and flat slit shaped pores with open cylindrical on all sides. (3) The coal samples exhibit strong CH₄ adsorption capacity, with an average Langmuir volume (VL) of 28.77 cm³/g. (4) The fractal characteristics of multi-scale pores are significant. The average pore fractal dimension (DC) based on CO2 adsorption is 2.4686, and the average pore surface fractal dimension (DN−1) and pore structure fractal dimension (DN−2) based on N2 adsorption are 2.5943 and 2.7202, respectively. (5) The degree of thermal evolution, material composition, pore structure, and heterogeneity of coal rock jointly control the CH4 adsorption capacity. With the increase of Ro, max, the content of vitrinite and the proportion of micropores increase, and the complexity and heterogeneity of pore structure increase, providing more CH4 adsorption sites, thus improving the adsorption capacity. There is a strong positive correlation between VL and DC, and DC can be used as a key parameter to evaluate the adsorbed gas content of deep coal in the study area. The research results have theoretical guiding significance for deep coalbed methane resource evaluation, “sweet spot” identification, and efficient development.
- Open Access
- 12 February 2026
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 21 (2) , e0342662
Pore structure and fractal characteristics of deep shale gas reservoirs in the Western Chongqing block, Sichuan Basin
To date, researchers have not systematically investigated the geological characteristics of deep shale gas reservoirs in the Western Chongqing Block. Furthermore, the single technique remains insufficient for characterizing the complexity of their multi-scale pore structures. Therefore, this study integrates scanning electron microscopy (SEM), argon ion polishing-field emission scanning electron microscopy (AIP-FESEM), high-pressure mercury intrusion (HPMI), and low-pressure gas adsorption (LPGA) to qualitatively and quantitatively investigate the microscopic pore structure of shale gas reservoirs in the Western Chongqing block. Meanwhile, the pore fractal characteristics were analyzed based on HPMI and LPGA experiments using the mercury saturation model, the Frenkel-Halsey-Hill (FHH) model, and the volume-surface area (V-S) model. The results show that, first, the pore types of the samples in the Western Chongqing block include organic pores, intergranular pores, intragranular pores, intercrystalline pores, and interlayer fractures; second, micropores are the main contributors to the total pore volume, mainly developed in the three ranges of 0.45 ~ 0.5 nm, 0.55 ~ 0.6 nm, and 0.8 ~ 0.85 nm, followed by mesopores and finally macropores; finally, the macropores of the samples exhibit stronger heterogeneity and more complex pore-throat structures compared to mesopores. The heterogeneity of the pore structure is stronger than that of the pore surface, indicating a more complex internal pore structure. Additionally, the microporous structures of the samples are also characterized by relatively complex. The experimental results provide important guidance for the economical and efficient development of shale gas.
- 12 February 2026
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 21 (2) , e0342662
Open AccessPore structure and fractal characteristics of deep shale gas reservoirs in the Western Chongqing block, Sichuan Basin
To date, researchers have not systematically investigated the geological characteristics of deep shale gas reservoirs in the Western Chongqing Block. Furthermore, the single technique remains insufficient for characterizing the complexity of their multi-scale pore structures. Therefore, this study integrates scanning electron microscopy (SEM), argon ion polishing-field emission scanning electron microscopy (AIP-FESEM), high-pressure mercury intrusion (HPMI), and low-pressure gas adsorption (LPGA) to qualitatively and quantitatively investigate the microscopic pore structure of shale gas reservoirs in the Western Chongqing block. Meanwhile, the pore fractal characteristics were analyzed based on HPMI and LPGA experiments using the mercury saturation model, the Frenkel-Halsey-Hill (FHH) model, and the volume-surface area (V-S) model. The results show that, first, the pore types of the samples in the Western Chongqing block include organic pores, intergranular pores, intragranular pores, intercrystalline pores, and interlayer fractures; second, micropores are the main contributors to the total pore volume, mainly developed in the three ranges of 0.45 ~ 0.5 nm, 0.55 ~ 0.6 nm, and 0.8 ~ 0.85 nm, followed by mesopores and finally macropores; finally, the macropores of the samples exhibit stronger heterogeneity and more complex pore-throat structures compared to mesopores. The heterogeneity of the pore structure is stronger than that of the pore surface, indicating a more complex internal pore structure. Additionally, the microporous structures of the samples are also characterized by relatively complex. The experimental results provide important guidance for the economical and efficient development of shale gas.
- Open Access
- 20 January 2026
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 21 (1) , e0337079
Study on gas-water two-phase seepage law and flow characteristics of the matrix-fracture system in shale gas reservoirs
As a clean energy source, shale gas plays a vital role in supporting China’s strategic objectives of carbon peaking and carbon neutrality through its efficient development. Due to the low porosity, low permeability, complex pore structure, and strong heterogeneity of deep shale gas reservoirs, the gas-water two-phase seepage law and flow characteristics remain unclear. This study focuses on deep shale gas in the Western Chongqing block as the research subject. Through the gas-water displacement experiments combined with NMR techniques, the gas-water two-phase seepage laws and flow characteristics of the shale gas matrix-fracture system were revealed. The results show that: (1) In the water displacement gas experiment, formation water cannot break through the matrix-type sample, with its displacement velocity decreasing over time and eventually approaching zero. Under the same time conditions, the higher the displacement pressure, the faster the displacement velocity, and the higher the NMR signal. The matrix-fracture type sample breaks through in a short time, and the time when the NMR signal is stable is much less than that of the matrix-type sample. The displacement pressure is negatively correlated with the NMR signal. (2) In the reverse gas displacement experiment, the gas cannot break through the matrix-type sample. For the matrix-fracture type sample, as the displacement pressure increases, the water phase relative permeability increases, the irreducible water saturation decreases, the gas phase relative permeability decreases, the co-permeability zone slightly expands, and the equal permeability point shifts to the lower left. The findings provide a theoretical basis for the efficient development of shale gas in China.
- 20 January 2026
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 21 (1) , e0337079
Open AccessStudy on gas-water two-phase seepage law and flow characteristics of the matrix-fracture system in shale gas reservoirs
As a clean energy source, shale gas plays a vital role in supporting China’s strategic objectives of carbon peaking and carbon neutrality through its efficient development. Due to the low porosity, low permeability, complex pore structure, and strong heterogeneity of deep shale gas reservoirs, the gas-water two-phase seepage law and flow characteristics remain unclear. This study focuses on deep shale gas in the Western Chongqing block as the research subject. Through the gas-water displacement experiments combined with NMR techniques, the gas-water two-phase seepage laws and flow characteristics of the shale gas matrix-fracture system were revealed. The results show that: (1) In the water displacement gas experiment, formation water cannot break through the matrix-type sample, with its displacement velocity decreasing over time and eventually approaching zero. Under the same time conditions, the higher the displacement pressure, the faster the displacement velocity, and the higher the NMR signal. The matrix-fracture type sample breaks through in a short time, and the time when the NMR signal is stable is much less than that of the matrix-type sample. The displacement pressure is negatively correlated with the NMR signal. (2) In the reverse gas displacement experiment, the gas cannot break through the matrix-type sample. For the matrix-fracture type sample, as the displacement pressure increases, the water phase relative permeability increases, the irreducible water saturation decreases, the gas phase relative permeability decreases, the co-permeability zone slightly expands, and the equal permeability point shifts to the lower left. The findings provide a theoretical basis for the efficient development of shale gas in China.
- Open Access
- 29 December 2025
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Influencing factors of oil-bearing capacity in tight sandstones based on pore structure characterization: a case study of the Fuyu reservoir in the Xinmiao oilfield, Southern Songliao Basin
The tight sandstone reservoir exhibits a complex pore structure and strong heterogeneity. Accurate characterization of its pore structure is crucial for improving the efficiency of tight oil development. This study investigates tight sandstone samples exhibiting different oil-bearing levels from the Fuyu oil reservoir of the fourth member of the Quantou Formation in the Xinmiao area, located in the southern Songliao Basin. The influence of pore structure on oil-bearing capacity was investigated through a series of systematic experiments, including low-pressure nitrogen adsorption (LPN2A), high-pressure mercury intrusion (HPMI), constant-rate mercury intrusion (CRMI), nano-computed tomography (nano-CT), and nuclear magnetic resonance (NMR). The results show that: (1) The microscopic pore structure influences the macroscopic oil-bearing capacity. As the oil-bearing level of the sample increases, the corresponding pore structure gradually improves, and the oil saturation increases to 32.93%, 40.36%, 42.61%, and 50.80%, respectively. (2) The oil saturation of fluorescent samples was primarily contributed by small pores (T2 < 10 ms), with a contribution rate of 78.17%. The oil saturation of oil trace and oil flecked samples was mainly contributed by small pores and medium pores (10 < T2 < 100 ms), with combined contribution rates of 93.75% and 84.35%, respectively. The oil saturation of oil immersion samples was primarily contributed by medium pores and large pores (T2 > 100 ms), with a contribution rate of 54.45%. (3) Pore-throat connectivity and its heterogeneity are the key factors influencing the oil-bearing capacity of tight sandstone in the study area. The pore-throat radius, connected pore throat volume percentage and NMR fractal dimension are the best parameters to characterize oil-bearing capacity. (4) The lower limit for oil-bearing capacity in the tight sandstone reservoir of the study area is oil trace, and the corresponding threshold values of a pore–throat radius of 1.19 μm, a connected pore–throat volume percentage of 47.5%, and an NMR fractal dimension of 2.8169. This research establishes a quantitative linkage between pore-throat structure and oil-bearing capacity, providing diagnostic parameters for tight oil evaluation.
- 29 December 2025
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessInfluencing factors of oil-bearing capacity in tight sandstones based on pore structure characterization: a case study of the Fuyu reservoir in the Xinmiao oilfield, Southern Songliao Basin
The tight sandstone reservoir exhibits a complex pore structure and strong heterogeneity. Accurate characterization of its pore structure is crucial for improving the efficiency of tight oil development. This study investigates tight sandstone samples exhibiting different oil-bearing levels from the Fuyu oil reservoir of the fourth member of the Quantou Formation in the Xinmiao area, located in the southern Songliao Basin. The influence of pore structure on oil-bearing capacity was investigated through a series of systematic experiments, including low-pressure nitrogen adsorption (LPN2A), high-pressure mercury intrusion (HPMI), constant-rate mercury intrusion (CRMI), nano-computed tomography (nano-CT), and nuclear magnetic resonance (NMR). The results show that: (1) The microscopic pore structure influences the macroscopic oil-bearing capacity. As the oil-bearing level of the sample increases, the corresponding pore structure gradually improves, and the oil saturation increases to 32.93%, 40.36%, 42.61%, and 50.80%, respectively. (2) The oil saturation of fluorescent samples was primarily contributed by small pores (T2 < 10 ms), with a contribution rate of 78.17%. The oil saturation of oil trace and oil flecked samples was mainly contributed by small pores and medium pores (10 < T2 < 100 ms), with combined contribution rates of 93.75% and 84.35%, respectively. The oil saturation of oil immersion samples was primarily contributed by medium pores and large pores (T2 > 100 ms), with a contribution rate of 54.45%. (3) Pore-throat connectivity and its heterogeneity are the key factors influencing the oil-bearing capacity of tight sandstone in the study area. The pore-throat radius, connected pore throat volume percentage and NMR fractal dimension are the best parameters to characterize oil-bearing capacity. (4) The lower limit for oil-bearing capacity in the tight sandstone reservoir of the study area is oil trace, and the corresponding threshold values of a pore–throat radius of 1.19 μm, a connected pore–throat volume percentage of 47.5%, and an NMR fractal dimension of 2.8169. This research establishes a quantitative linkage between pore-throat structure and oil-bearing capacity, providing diagnostic parameters for tight oil evaluation.