JLJun Lu

Jun Lu

*This is an algorithmically generated author record based on publicly available information.

Jun Lu has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Relationship Between Xonotlite Crystallite Size and Strength Degradation of Silica-Enriched Oil Well Cement Under 240 °C Curing Conditions

    by Guodong Cheng, Lei Chen, Qian Tao, Haoguang Wei, Fuzhu Xie, Jixiang Wang, Jun Lu

    The strength degradation of silica-enriched oil well cement under high-temperature curing conditions poses a challenge to wellbore integrity. Using the single-peak Scherrer equation, this study evaluated xonotlite crystallite size evolution in cements cured at different setting temperatures. Low-temperature setting (80 °C) maintained stable crystallite size (≈35–36 nm), accompanied by strength gain and pore refinement. High-temperature setting (240 °C) induced crystallite coarsening (up to 40 nm), concurrent with strength degradation and pore coarsening. Similar crystallite sizes led to divergent mechanical performance depending on crystal morphology, highlighting the need for combined size-morphology assessment. These findings identify xonotlite crystallite coarsening as a key indicator of high-temperature cement retrogression.


  • Open Access

    Artificial Intelligence for Underground Gas Storage Engineering: A Review with Bibliometric and Knowledge-Graph Insights

    by Jiasong Chen, Guijiu Wang, Xuefeng Bai, Chong Duan, Jun Lu, Luokun Xiao, Xinbo Ge, Guimin Zhang, Jinlong Li

    Underground gas storage (UGS), encompassing hydrogen, natural gas, and compressed air, is a cornerstone of large-scale energy transition strategies, offering seasonal balancing, security of supply, and integration with renewable energy systems. However, the complexity of geological conditions, multiphysics coupling, and operational uncertainties pose significant challenges for UGS design, monitoring, and optimization. Artificial intelligence (AI)—particularly machine learning and deep learning—has emerged as a powerful tool to overcome these challenges. This review systematically examines AI applications in underground storage types such as salt caverns, depleted hydrocarbon reservoirs, abandoned mines, and lined rock caverns using bibliometric and knowledge-graph analysis of 176 publications retrieved from the Web of Science Core Collection. The study revealed a rapid surge in AI-related research on UGS since 2017, with underground hydrogen storage emerging as the most dynamic and rapidly expanding research frontier. The results reveal six dominant research frontiers: (i) AI-assisted geological characterization and property prediction; (ii) physics-informed proxy modeling and multi-physics simulation; (iii) gas–rock–fluid interaction, wettability, and interfacial behavior prediction; (iv) injection-production process optimization; (v) intelligent design and construction of underground storage, especially salt caverns; and (vi) intelligent monitoring, optimization, and risk management. Despite these advances, challenges persist in data scarcity, physical consistency, and generalization. Future efforts should focus on hybrid physics-informed AI, digital twin-enabled operation, and multi-gas comparative frameworks to achieve safe, efficient, and intelligent underground storage systems aligned with global carbon neutrality.


  • Open Access

    Multi-Objective Optimization of Gas Storage Compressor Units Based on NSGA-II

    by Lianbin Zhao, Lilin Fan, Jun Lu, Mingmin He, Su Qian, Qingsong Wei, Guijiu Wang, Haoze Bai, Hu Zhou, Yongshuai Liu, et al.

    This study addresses the parallel operation of multiple compressor units in the gas injection process of gas storage facilities. A multi-objective optimization model based on the NSGA-II algorithm is proposed to maximize gas injection volume while minimizing energy consumption. Thermodynamic models of compressors and flow–heat transfer models of air coolers are established. The influence of key factors, including inlet and outlet pressures, temperatures, and natural gas composition, on compressor performance is analyzed using the control variable method. The results indicate that the first-stage inlet pressure has the most significant impact on gas throughput, and higher compression ratios lead to increased specific energy consumption. The NSGA-II algorithm is applied to optimize compressor start–stop strategies and air cooler speed matching under high, medium, and low compression ratio conditions. This study reveals that reducing the compression ratio significantly enhances the energy-saving potential. Under the investigated conditions, adjusting air cooler speed can achieve approximately 2% energy savings at high compression ratios, whereas at low compression ratios, the energy-saving potential reaches up to 8%. This research provides theoretical guidance and technical support for the efficient operation of gas storage compressor units.


  • Open Access

    Numerical Simulation Study of Salt Cavern CO2 Storage in Power-to-Gas System

    by Weizheng Bai, Jun Lu, Jian Wang, Xinghui Fu, Yaping Fu, Yashuai Huang, Xiao Wang, Xilin Shi

    China’s renewable energy sector is experiencing rapid growth, yet its inherent intermittency is creating significant challenges for balancing power supply and demand. Power-to-gas (PtG) technology, which converts surplus electricity into combustible gas, offers a promising solution. Salt caverns, due to their favorable geological properties, are among the best choices for large-scale underground energy storage in PtG systems. CO2 leakage along the interlayer and salt rock–interlayer interfaces is a key constraint on the CO2 tightness of subsurface salt caverns. This paper focuses on the critical issue of tightness within salt cavern CO2 storage, particularly in the Jintan region. A coupled hydro-mechanics mathematical model is developed to investigate CO2 transportation and leakage in bedded salt caverns, with key variables such as permeability range, pore pressure evolution, and permeability changes being analyzed. The results reveal that permeability plays a decisive role in determining the CO2 transportation rate and leakage extent within the salt rock layer. Notably, the CO2 transportation rate and influence range in the mudstone interlayer are significantly larger than those in the salt rock over the same period. However, with prolonged storage time, the CO2 transportation rate and pressure increase in both salt rock and mudstone interlayer exhibit a decreasing trend, eventually stabilizing as the CO2 pressure front reaches the boundary of the simulation domain. Furthermore, elevated operating pressure markedly expands the permeability range and results in higher cumulative leakage. For a specific salt cavern, the CO2 leakage range can reach up to 142 m, and the leakage volume can reach 522.5 tonnes with the increase in operating pressure during 35 years of operation. Therefore, the setting of operational pressure should fully consider the influence of permeability and mechanical strength of the salt rock and mudstone interlayer. These findings provide valuable insights into optimizing the sealing performance of salt cavern CO2 storage systems under varying conditions.


  • Open Access

    Mechanical Behavior of Sediment-Type High-Impurity Salt Cavern Gas Storage during Long-Term Operation

    by Jian Wang, Peng Li, Weizheng Bai, Jun Lu, Xinghui Fu, Yaping Fu, Xilin Shi

    With the development of salt cavern gas storage technology, the construction of large-scale salt cavern gas storage using sediment voids is expected to solve the problems of low effective volume formation rate and poor construction economy of high-impurity salt mines. At present, there are few studies on the long-term operational mechanical behavior of salt cavern gas storage under the influence of sediment accumulation. The present paper studies the influence of sediment height, particle gradation, and operating pressure on the stability of salt caverns by constructing a coupling model of sediment particle discontinuous medium and surrounding rock continuous medium. The continuous–discontinuous coupling algorithm is suitable for analyzing the influence of sediment height and particle gradation on the creep shrinkage of salt caverns. The increase in sediment height slows down the creep shrinkage of the cavern bottom, which strengthens the restraining effect on the surrounding rock of the cavern. As a result, the position of the maximum displacement of the surrounding rock moves to the upper part of the cavern. The sediment particle gradation has little effect on the cavern volume shrinkage rate. The greater the coarse particle content, the smaller the cavern volume shrinkage rate. The greater the operating pressure, the more conducive to maintaining the stability of the cavern. This situation slows down the upward movement of the sediment accumulation and increases the gas storage space in the upper part of the cavern. The obtained results can provide a reference for evaluating the long-term operational stability of sediment-type high-impurity salt cavern gas storage.


  • Open Access

    Mechanical Behavior of Sediment-Type High-Impurity Salt Cavern Gas Storage During Long-Term Operation

    by Jian Wang, Peng Li, Weizheng Bai, Jun Lu, Xinghui Fu, Yaping Fu, Xilin Shi

    With the development of salt cavern gas storage construction technology, the construction of large-scale gas storage salt caverns using sediment voids is expected to solve the problem of low effective volume formation rate and poor construction economy of high-impurity salt mines. There are few studies on the long-term operation mechanical behavior of salt cavern gas storage under the influence of sediment accumulation currently. This paper studies the influence of sediment accumulation height, particle gradation, and operating pressure on the stability of salt caverns by constructing a coupling model of sediment particle discontinuous medium and surrounding rock continuous medium. The continuous-discontinuous coupling algorithm is suitable for analyzing the influence of particle accumulation height and particle gradation on the creep shrinkage of salt caverns. The increase of sediment accumulation height slows down the creep shrinkage of the bottom of the salt cavern, strengthens the restraining effect on the surrounding rock of the cavern, and moves the position of the maximum displacement of the surrounding rock to the upper part of the cavern; the sediment particle gradation has little effect on the cavern volume shrinkage rate, and the greater the coarse particle content, the smaller the cavern volume shrinkage rate; the greater the operating pressure, the more conducive to maintaining the stability of the cavern, slowing down the upward movement of the sediment body and increasing the gas storage space in the upper part of the cavern. This research results can provide a reference for evaluating the long-term operation stability of sediment-type high-impurity salt cavern gas storage.


  • Open Access

    Study on Energy Conversion Efficiency and Structure Optimization of the Multorifices Nozzle for Radial Jet Drilling

    by Famu Huang, Ziheng Zhu, Jian Wang, Ping Zhang, Zhongxin Ren, Jun Lu, Haibo Su, Hong Zhang, Jingbin Li

    Underground gas storage (UGS) is a crucial method for mitigating seasonal fluctuations in natural gas consumption. However, in China, UGS is primarily achieved through the conversion of abandoned gas reservoirs with limited storage capacity. Radial jet drilling (RJD) is an effective technology for the secondary development of depleted reservoirs. The multiorifice nozzle is a critical component that can efficiently break rock and create radial holes to increase gas production. In this study, we investigate the impact of nozzle structure on energy conversion efficiency through numerical simulations and experiments. Additionally, we design a swirling multiorifice nozzle and verify its effectiveness in field applications. Our findings indicate that the nozzle pressure drop and vorticity are primarily generated at the acute angle of the orifices. The number of forward orifices is directly proportional to energy loss, while the discharge coefficient and hydraulic performance initially increase and then decrease. Swirling multiorifice nozzle have fewer backward orifices, so they have less energy loss and a larger discharge coefficient. It has achieved better rock-breaking results in field applications. In conclusion, this study provides theoretical guidance and technical support for the secondary development of gas storage.