YMYunfei Mao

Yunfei Mao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yunfei Mao has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A coupled two-dimensional–three-dimensional hydrodynamic model for simulating flood wave evolution in reservoirs and riverbeds

    by Hao Yuan, Yiyao Zou, Wei Diao, Yunfei Mao

    The geometric scale of real reservoirs is immense, and their boundaries are intricate. Consequently, two-dimensional numerical simulations of the entire reservoir cannot accurately capture the three-dimensional flow characteristics in localized regions. Conversely, comprehensive three-dimensional simulations are often unfeasible due to the substantial computational resources they demand. This paper proposes a two-dimensional-three-dimensional coupled hydrodynamic model by combining a two-dimensional shallow water model and a three-dimensional free surface model based on the Lattice Boltzmann Method. The model introduces algorithms that establish unified requirements for computational parameters, ensure the conservation of physical quantities at the interface, and facilitate the inversion of two-dimensional data to three-dimensional formats, as well as the integration of three-dimensional data into two-dimensional formats. The model was applied to meticulously simulate the evolution of flood waves resulting from dam breaches over uneven riverbeds. Through theoretical analysis and experimental comparisons, a detailed examination of the conservation and coherence of physical quantities at the interface was conducted, thereby validating the accuracy of the proposed approach. Finally, the large-scale evolution of wave surges in a riverbed hydropower station reservoir was simulated, effectively demonstrating the capability to address practical hydrodynamic challenges. Additionally, the discussion highlights the computational savings achieved by this model relative to conventional three-dimensional simulations, establishing a foundation for its application in real-world engineering cases.


  • Landslide-induced impacts on downstream vessels based on an accurate and robust smoothed particle hydrodynamics framework

    by Hao Yuan, Chunhua Xia, Xidong Zhou, Qian Sun, Ruichang Hu, Wei Diao, Yunfei Mao

    Landslide-induced tsunami waves pose significant risks to vessels navigating or anchored in affected water bodies. To address this issue, a validated smoothed particle hydrodynamics (SPH) framework coupled with Delta-SPH method and Shifting Algorithm was assessed and then employed to investigate the impact of such waves on vessels, considering key influential factors such as landslide thickness, length, initial position, initial water depth, vessel width, and slope-to-vessel distance. The results indicate that the heave and sway motions of the vessel are primarily influenced by the initial wave, while the roll motion is mainly affected by the secondary waves. Among the parameters examined, the landslide thickness, slope-to-vessel distance, and initial water depth have the most significant effects on the maximum heave, sway, and roll values, with relative differences of 125.5%, 177.4%, and 223.0%, respectively. Variations in initial water depth led to different landslide motion patterns: the riverbed movement pattern and the chute movement pattern, which predominantly govern the generation process of secondary waves. Additionally, prediction equations for the maximum heave, sway, and roll motions of were proposed to quantitatively assess the impacts of various initial factors on vessel motion characteristics. The prediction equations reveal that the heave motion is predominantly affected by the landslide volume, the sway motion is predominantly affected by the slope-to-vessel distance, and the roll motion is primarily governed by the landslide length and initial water depth. The research provides insight into the dynamic responses of vessels under landslide-induced tsunami waves, offering valuable guidance for disaster prevention and mitigation efforts.


  • A preliminary experimental study on atomization rainfall properties by two-jet collision in high dam discharge

    by Hao Yuan, Qian Sun, Ruichang Hu, Yunfei Mao, Xidong Zhou

    The energy dissipation method commonly employed for flood discharge in high dams involves the collision of jets in the air. This approach frequently results in the issue of flood discharge atomization. This study experimentally investigates the rainfall characteristics resulting from the interaction between a surface-orifice jet and a deep-orifice jet during high dam discharges. The research explores various flow rate ratios and collision angles of the two jets, focusing on the spatial distribution of rainfall intensity, as well as the size and velocity of droplets post-collision. The findings revealed that the rainfall distribution on the horizontal plane resembles a mushroom cloud, with the maximum rainfall intensity at the center. Increasing the collision angle between the jets significantly increases the dispersion range of atomized rainfall, while the maximum intensity decreases. Additionally, as the jet flow rate ratio increases, the dispersal range of rainfall initially expands before stabilizing, with relatively minor variations in intensity. Following a two-jet collision, the trajectory of the jet was derived, and the associated parameters were determined using experimental data. The probability distributions for droplet size and velocity closely approximated Gaussian distributions. The study also observed that the number of droplets per unit time, along with the ensemble-averaged diameter and velocity, initially increases and then decreases longitudinally. Meanwhile, the number of droplets per unit time gradually decreases in the lateral direction, while the ensemble-averaged diameter and velocity remain relatively constant. Furthermore, with an increase in the jet flow rate ratio, both the ensemble-averaged diameter and velocity of droplets follow a pattern of initial increase and subsequent decrease, while the collision angle has no significant impact.


  • Experimental study on the influence of water depth and bed slope variations on dam-break flood wave propagation

    by Xidong Zhou, Lijun Su, Hao Yuan, Yunfei Mao, Qian Sun

    Damage to dam structures frequently results in catastrophic consequences. Consequently, understanding of the characteristics of the movement of dam-break flow along the sloping wet bed can assist in the issuance of timely flood warnings and risk mitigation. In this study, a series of large-scale flume experiments was conducted with the objective of investigating the effects of upstream and downstream water depth and bed slope on the propagation of dam-break waves. The water level is measured and processed to calculate the wavefront velocity. Results show that the wave propagation behavior can be classified as bore and undular waves through the global Froude numbers (Frx) and local Froude numbers (Frl). When Frx < 1.225 or Frl < 1.475, the dam-break wave propagates as the undular wave. In the undular wave state, the wavefront velocity (U) decreases with increasing water depth ratio α. Additionally, the U with Frx shows a similar trend, where the experimental value surpasses the analytical solution. The dimensionless maximum wave height (ΔHmax) increases with Frx and then decreases. The deviation from the analytical solution ranges between 67.22% and 127.38%. When Frx > 1.225 or Frl > 1.475, the dam-break wave propagates as the bore wave. In the bore wave state, the U increases slightly with the water depth ratio α, while the change rule of U with Frx is similar to it. The dimensionless maximum wave height (ΔHmax) remains relatively constant as Frx increases, showing a high degree of consistency with the analytical solution. The presence of bed slope results in increased wavefront velocity and wave heights, while an increase in α results in the emergence of more pronounced undular wave phenomena. Furthermore, the experimental results are compared with existing analytical solutions, and the validity of the analytical solutions and their limitations are discussed.


  • Open Access

    Study of Cavitation Bubble Collapse near a Wall by the Modified Lattice Boltzmann Method

    by Yunfei Mao, Yong Peng, Jianmin Zhang

    In this paper, an improved lattice Boltzmann Shan‒Chen model coupled with Carnahan-Starling equation of state (C-S EOS) and the exact differential method (EDM) force scheme is used to simulate the cavitation bubble collapse in the near-wall region. First, the collapse of a single cavitation bubble in the near-wall region was simulated; the results were in good agreement with the physical experiment and the stability of the model was verified. Then the simulated model was used to simulate the collapse of two cavitation bubbles in the near-wall region. The main connection between the two cavitation bubble centre lines and the wall surface had a 45° angle and parallel and the evolution law of cavitation bubbles in the near-wall region is obtained. Finally, the effects of a single cavitation bubble and double cavitation bubble on the wall surface in the near-wall region are compared, which can be used to study the method to reduce the influence of cavitation on solid materials in practical engineering. The cavitation bubble collapse process under a two-dimensional pressure field is visualized, and the flow field is used to describe the morphological changes of cavitation bubble collapse in the near-wall region. The improved lattice Boltzmann Method (LBM) Shan‒Chen model has many advantages in simulating cavitation problems, and will provide a reference for further simulations.