NYNurul Hajar Mohd Yussoff

Nurul Hajar Mohd Yussoff

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nurul Hajar Mohd Yussoff has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Conjugate Gradient Methods in Fitting Precipitation of Rainfall Data in Malaysia

    by Nur Syarafina Mohamed, Hua Ru Tang, Nurul Hajar Mohd Yusoff, Norhaslinda Zullpakkal

    Conjugate gradient method (CGM) is one of the most efficient numerical methods for solving unconstrained optimization problems. It is also known as an iterative method with simple formulation. The classical CGM has always been an interest to the current researchers in improving the formulation which are categorized into three-term (TTCGM), spectral (SCGM), hybrid and scaled CGM. Although there are many variations of the CGM available, choosing the most efficient and effective one for a particular problem can be a time-consuming process. In this study, spectral Hestenes-Stiefel (sHS) CGM with the greatest NOI and central processing time per unit (CPU time) is selected as the efficient method to be applied to the real-life problems in regression analysis. A data set of rainfall precipitation in Malaysia from year 2009 until 2019 is collected for data fitting purpose. The data set is transformed into a test function also defined as objective function. The approximate functions are generated from CG, Least Square, Trendline method for the relative error purpose. The estimation data for the year 2020 can be predicted using the approximate functions. The calculation of relative error of the linear and quadratic model for each method is calculated based on the estimation data for the year 2020 and its actual data. The numerical results show that the sHS CGM is a suitable and good alternative to solve the Least Square models.


  • Open Access

    Nonlinear Equation Solver with MATLAB Graphical User Interface

    by Nur Idalisa Norddin, Nurul Hafawati Fadhilah, Muhammad Azri Azman Shah, Nurul Hajar Mohd Yusoff, Nur Intan Syafinaz Ahmad

    Nonlinear systems of equations, which is common in scientific and engineering fields, pose a significant difficulty because they may have numerous solutions and are complicated to be numerically solved. This study aims to improve the effectiveness and availability of solving these systems by creating a MATLAB Graphical User Interface (GUI) to compare different iterative methods. The GUI makes it easier to evaluate algorithm performance by providing a more accessible interface to input nonlinear functions, their Jacobians, and also their respective initial approximations. The article evaluates the differences and similarities of four commonly used iterative methods: Newton, Broyden, BFGS, and Steepest Descent. A set of ten typical nonlinear test functions were created specifically as a benchmark suite for assessing methods in different situations. Thorough testing and analysis helped determine the advantages and disadvantages of each approach, offering insights into their suitability for different problem characteristics. Researchers and practitioners who have tried to analyse and contrast the reliabilities of iterative methods in solving nonlinear systems may discover the MATLAB GUI to be beneficial. By utilizing a visual and interactive interface, the GUI allows users to gain deep understanding.


  • An investigation on electric field emission in shielded capacitive coupler for wireless power transfer utilizing diverse materials

    by Nurul Nadhirah Mohd Razib, Suziana Ahmad, Nurul Hajar, Amirul Syafiq Sadun

    This investigation proposes the utilization of diverse dielectric materials to reduce electric field emissions in shielded capacitive coupler for wireless power transfer. To identify the most influential dielectric materials in minimizing electric field emissions, Finite Element Analysis (FEA) was conducted. The dielectric materials incorporated in this proposed initiative encompass rubber, glass, FR4, halowax, air, mineral oil, and paper. These dielectrics served as separators between the coupler and the shielding plate. The work demonstrates the electric field emissions at various values in distinct locations of the exposure area, encompassing the top, bottom, and side of the coupler. The result shows the air is the most suitable insulator among all dielectric materials.

  • Open Access

    Modeling and Prediction of The Mechanical Properties of Feedstock by Cooling-Slope Casting Process using MOJaya Algorithm

    by Rahaini Mohd Said, Mohamad Ridzuan Mohamad Kamal, Nor Hafizah Hussin, Sinarwati Mohamad Suhaili, Siti Haryanti Hj Hairol Anuar, Adam Samsudin Samsudin, Nurul Hajar Mohd Yussoff, Eko Arip Winanto

    Cooling-slope (CS) casting parameters optimization is very challenging due to the uncertainties of parameter values that are influenced by many factors. Therefore, a combination of estimation and optimization models that can solve multi-objective problems using limited data is proposed to reduce the real casting operational cost and time. In casting optimization, modeling and optimization of CS parameters have been considered to identify optimal CS parameters that would lead to better feedstock performance. Computational techniques have been suggested by previous researchers to solve the optimization in the manufacturing process. The study assessed the CS process to determine the feedstock's quality by evaluating its mechanical qualities, namely Tensile strength and Impact strength. Hence, computational methods namely the MOJaya algorithm are utilized to model and optimize the parameters of CS to address the CS problem and forecast the performance of the feedstock. This work conducted a thorough analysis of the impact of CS process parameters on the tensile strength and impact strength using an experimental design. The experiment was conducted using a three-level full factorial design (FFD) of the experiment (DOE), for the parameters of pouring temperature, slanting angle, and pouring distance. The modeling technique involved the development of multiple polynomial regression (MPR) as an objective function in the MOJaya Algorithm. The outcome of the optimization procedure revealed that the optimal solutions obtained from MOJaya were projected to surpass both the initial experimental data and the MOJaya algorithm in terms of the highest values of tensile strength and impact strength. The difference between the two sets of values is 10.92% and 15.76%, respectively. Subsequently, this technique may be employed by a caster to forecast the performance of the feedstock without using repeated experiments that are costly and time-consuming.


  • Open Access

    Handling Volatility and Nonlinearity in Wind Speed Data: A Comparative Analysis between ARIMA-GARCH and ARIMA-MLP

    by Nor Hafizah Hussin, Fadhilah Yusoff, Siti Haryanti Hj Hairol Anuar, Rahaini Mohd Said, Adam Samsudin, Nur Azura Noor Azhuan, Nurul Hajar Mohd Yussoff

    One of the notable features of wind speed is its volatility and nonlinearity. Thorough assessment on the presence of these features is crucial to obtain a wind speed forecasting model with higher accuracy. In this study, the conventional time series linear model; ARIMA model was applied to assess the internal structure of the wind speed daily data in two stations in Johor; Senai and Mersing. Due to the existence of some nonlinearity features in the residuals part of ARIMA modelling, two nonlinear models were introduced to capture the internal structure of the residual data. Both conventional time series models; GARCH, and machine learning model; MLP was applied to model the residuals of ARIMA model. The out-sample performance in forecasting accuracy was compared between the ARIMA-GARCH model and the ARIMA-MLP model. The findings proves that MLP model has outperformed GARCH model in capturing the dynamics in the residual data by providing the lowest error measurements. Thus, the machine learning approaches has proven its superiority against the conventional time series nonlinear model in handling the nonlinearity in the daily wind speed series for wind speed forecasting.

  • Open Access

    Development of Automated Exhaust Fan for Modern Kitchen with IoT Notification System

    by Muhammad Syukri Suliaman, Adam Samsudin, Muhamad Falihan Bahari, Nor Hafizah Hussin, Nur Azura Noor Azhuan, Nurul Hajar Mohd Yussoff, Norhayati Rosli, Irianto Irianto

    This project shows the development of an automated exhaust fan for a modern kitchen with an IoT notification system for a better air ventilation system with lower electrical consumption and cheaper installation costs. Utilizing an exhaust fan as the ventilation system will significantly lower the cost of installation and maintenance. The exhaust fan will carry the process of removing hot air from the kitchen so that cooler surrounding temperatures can be achieved. The application of an automated microcontroller system will allow higher energy efficiency for daily cooking appliance usage. Then, the application of the DHT22 temperature sensor as the input for the microcontroller which can detect the precise temperature of the surrounding air. The exhaust fan will automatically turn ON when it detects the surrounding temperature is increased from 33℃. However, a notification will be sent to the user through the Blynk Application when the temperature of the kitchen is increasing and achieved 37℃ while a buzzer will turn ON to alert people in the house. Next, the AC voltage controller will help regulate the speed of the fan according to the input temperature so that more energy can be saved during long daily usage. At the end of this project, the outcome product will become a microcontroller that can be used in various types of households that already have a wall-mounted exhaust fan. Moreover, more users will be able to install this whole ventilation system for their hot kitchen due to low installation and maintenance costs. Lastly, the electrical monthly bill can be reduced.


  • Open Access

    The Application of Conjugate Gradient Methods to Optimize 3D Printed Parameters

    by Nurul Hajar, Nurul ‘Aini, Norrlaili Shapiee, Mohd Rivaie, Adam Samsudin, Nor Hafizah Hussin, Siti Haryanti Hairol Anuar

    The Conjugate Gradient (CG) method stands as an evolved computational technique designed for addressing unconstrained optimization problems. Its attractiveness stems from its simplicity, making it straightforward to implement, and its proven track record in effectively addressing real-world applications. Despite the recent surge in interest in this field, certain newer versions of the CG algorithm have failed to outperform the efficiency of their predecessors. Consequently, this paper introduces a fresh CG variant that upholds essential properties of the original CG methods, including sufficient descent and global convergence. In this paper, three types of new CG coefficients are presented with applications in optimizing data. Numerical experiments show that the proposed methods have succeeded in solving problems under exact line search conditions.

  • A hybrid of conjugate gradient method in modelling number of road accidents in Malaysia

    by Nurul ‘Aini, Nurul Hajar, Mohd Rivaie, Shamsatun Nahar Ahmad, Ain Aqiela Azamuddin

    This paper studies a new hybrid conjugate gradient (CG) method based on the Aini-Rivaie-Mustafa (ARM) CG method for solving nonlinear unconstrained optimization This paper studies a new hybrid conjugate gradient (CG) method based on the Aini-Rivaie-Mustafa (ARM) CG method for solving nonlinear unconstrained optimization