Anton Ginzburg
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Anton Ginzburg has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
Jules Henrotte
Department of Chemical Engineering, KU Leuven, Wetenschapspark 27, Diepenbeek, Belgium, 3590
4 shared publications- Francesco Zaccaria
Institut de Química Computacional i Catàlisi (IQCC) and Departament de Química, Universitat de Girona
3 shared publications Dilhan Kandemir
Department of Chemical Engineering, Soft Matter, Rheology, and Technology, KU Leuven, Wetenschapspark 27, 3590 Diepenbeek, Belgium
2 shared publicationsFrancesco Zaccaria
Xplore s.r.l, Viale delle Industrie - III traversa, Carinaro, CE, Italy, 81032
2 shared publications- Jules Henrotte
Chemical Engineering Department
2 shared publications - Luca Cannas
Department of Chemical Engineering KU Leuven Diepenbeek Belgium
2 shared publications
Latest Publications
- Open Access
- 12 October 2026
- Published by American Chemical Society (ACS) in ChemRxiv
When Ethylene Meets Sulfur: Direct Synthesis of Minimal Ethylene-Sulfur Copolymers
In inverse vulcanization chemistry, research has predominantly focused on multifunctional unsaturated comonomers to stabilize sulfur-rich structures, whereas the direct copolymerization of elemental sulfur with simple olefins has remained comparatively unexplored. Extending this concept to the simplest olefin, we report Minimal Ethylene-Sulfur Copolymers (MinESC), synthesized through the direct reaction of gaseous ethylene with elemental sulfur via a base-mediated inverse vulcanization approach under mild conditions. These materials are viscoelastic fluids of tunable viscosity reaching exceptionally high values. They exhibit a peculiar sheet-like morphology, polar surfaces, elevated electrical conductivity, and high permittivity, and can be reprocessed into predominantly elastic structures following thermal treatment. Our approach provides a straightforward route to a distinct class of sulfurethylene-derived functional materials and demonstrates that inverse vulcanization chemistry can be extended to the simplest olefin under industrially relevant pressures and temperatures.
- 12 October 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessWhen Ethylene Meets Sulfur: Direct Synthesis of Minimal Ethylene-Sulfur Copolymers
In inverse vulcanization chemistry, research has predominantly focused on multifunctional unsaturated comonomers to stabilize sulfur-rich structures, whereas the direct copolymerization of elemental sulfur with simple olefins has remained comparatively unexplored. Extending this concept to the simplest olefin, we report Minimal Ethylene-Sulfur Copolymers (MinESC), synthesized through the direct reaction of gaseous ethylene with elemental sulfur via a base-mediated inverse vulcanization approach under mild conditions. These materials are viscoelastic fluids of tunable viscosity reaching exceptionally high values. They exhibit a peculiar sheet-like morphology, polar surfaces, elevated electrical conductivity, and high permittivity, and can be reprocessed into predominantly elastic structures following thermal treatment. Our approach provides a straightforward route to a distinct class of sulfurethylene-derived functional materials and demonstrates that inverse vulcanization chemistry can be extended to the simplest olefin under industrially relevant pressures and temperatures.
- 29 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (19) , 17680-17688
Reversible Cross-Linking of Ketone-Functionalized Polyethylenes through the Formation of Acetals
The recycling of conventional cross-linked polyethylene (XLPE) is hampered by the irreversible nature of cross-link formation. In this work, a ketone-functionalized polyethylene (kf-PE) was reversibly cross-linked through the formation of acetal bridges by using different polyol cross-linkers. The acid-catalyzed acetalization reaction was optimized using two different reaction systems in which water was removed either by azeotropic distillation or through the hydrolysis of an orthoester. para-Toluenesulfonic acid (pTSA) and Bi(OTf)3 stood out as the most promising acid catalysts. Rheological characterization confirmed the thermoset-like behavior of the cross-linked materials, while solid-state NMR experiments demonstrated that the cross-link density further increased upon an additional heating step. The latter experiments indicate that the acetal cross-links are dynamic and can rearrange at elevated temperature. In this way, cross-linked materials with gel contents up to 80% were obtained. Finally, it was shown that the acetal bridges can be readily removed again through acid-catalyzed hydrolysis, which allows recycling of the original kf-PE.
- 29 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (19) , 17680-17688
Reversible Cross-Linking of Ketone-Functionalized Polyethylenes through the Formation of Acetals
The recycling of conventional cross-linked polyethylene (XLPE) is hampered by the irreversible nature of cross-link formation. In this work, a ketone-functionalized polyethylene (kf-PE) was reversibly cross-linked through the formation of acetal bridges by using different polyol cross-linkers. The acid-catalyzed acetalization reaction was optimized using two different reaction systems in which water was removed either by azeotropic distillation or through the hydrolysis of an orthoester. para-Toluenesulfonic acid (pTSA) and Bi(OTf)3 stood out as the most promising acid catalysts. Rheological characterization confirmed the thermoset-like behavior of the cross-linked materials, while solid-state NMR experiments demonstrated that the cross-link density further increased upon an additional heating step. The latter experiments indicate that the acetal cross-links are dynamic and can rearrange at elevated temperature. In this way, cross-linked materials with gel contents up to 80% were obtained. Finally, it was shown that the acetal bridges can be readily removed again through acid-catalyzed hydrolysis, which allows recycling of the original kf-PE.
- 11 August 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (17) , 9584-9594
Photocatalytic Functionalization of iPP under UV and Mild Conditions: From Direct Surface Activation to Blend Compatibilization
Post-polymerization C(sp3)–H functionalization of isotactic polypropylene (iPP) represents a key strategy to overcome its inherently nonpolar nature and enhance interfacial compatibility, yet conventional methods remain limited in material quality. Here, we report an alternative approach to functionalize both solid iPP surfaces and molecular iPP chains using a UV-driven photocatalytic method under mild conditions. We demonstrate that this strategy, performed at 25 °C and under aerobic conditions in the presence of maleic anhydride (MAH), transforms iPP surfaces into polar analogues, with the polar component of the surface energy reaching up to 20 mN/m and exhibiting excellent shelf-life stability over several months. Complementary, the modified synthetic protocol applied to iPP gels at 50 °C under inert conditions enables the synthesis of high-molecular-weight iPP-graft-MAH at functionalization levels of approximately 1 MAH per chain with only marginal chain scission. This process is regioselective to tertiary carbons and favors the functionalization of longer chains, providing conceptual advantages over industrial references. We demonstrate the processability of the resulting products and the mechanical property enhancements when used as phase compatibilizers in blends with polycaprolactone and natural wood.
- 11 August 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (17) , 9584-9594
Photocatalytic Functionalization of iPP under UV and Mild Conditions: From Direct Surface Activation to Blend Compatibilization
Post-polymerization C(sp3)–H functionalization of isotactic polypropylene (iPP) represents a key strategy to overcome its inherently nonpolar nature and enhance interfacial compatibility, yet conventional methods remain limited in material quality. Here, we report an alternative approach to functionalize both solid iPP surfaces and molecular iPP chains using a UV-driven photocatalytic method under mild conditions. We demonstrate that this strategy, performed at 25 °C and under aerobic conditions in the presence of maleic anhydride (MAH), transforms iPP surfaces into polar analogues, with the polar component of the surface energy reaching up to 20 mN/m and exhibiting excellent shelf-life stability over several months. Complementary, the modified synthetic protocol applied to iPP gels at 50 °C under inert conditions enables the synthesis of high-molecular-weight iPP-graft-MAH at functionalization levels of approximately 1 MAH per chain with only marginal chain scission. This process is regioselective to tertiary carbons and favors the functionalization of longer chains, providing conceptual advantages over industrial references. We demonstrate the processability of the resulting products and the mechanical property enhancements when used as phase compatibilizers in blends with polycaprolactone and natural wood.
- Open Access
- 10 June 2026
- Published by Wiley in Journal of Polymer Science
Kinetics of ε ‐Caprolactone Ring Opening Polymerization: Experimental and Modeling Study
Although polycaprolactone (PCL) is an established biodegradable polymer with various applications, comprehensive kinetic modeling of its production is very rare. We present a multi‐scale model of ring‐opening polymerization (ROP) of ε ‐caprolactone catalyzed by tin(II) octoate as a standard industrial method of PCL production. Five batch polymerization experiments with varying temperature and monomer/initiator ratio were conducted, leading to the production of linear PCL samples of varying molecular weight distributions. The experimental data were subsequently used for the rigorous estimation of kinetic parameters associated with the elementary reaction steps in the assumed kinetic scheme. The results of the model predictions are compared with experimental data with decent agreement, revealing that although the reaction dynamics are significantly slower for ROP of ε ‐caprolactone than for L,L‐lactide, the original kinetic scheme previously validated for polylactide production can be successfully used to model the PCL production process.
- 10 June 2026
- Published by Wiley in Journal of Polymer Science
Open AccessKinetics of ε ‐Caprolactone Ring Opening Polymerization: Experimental and Modeling Study
Although polycaprolactone (PCL) is an established biodegradable polymer with various applications, comprehensive kinetic modeling of its production is very rare. We present a multi‐scale model of ring‐opening polymerization (ROP) of ε ‐caprolactone catalyzed by tin(II) octoate as a standard industrial method of PCL production. Five batch polymerization experiments with varying temperature and monomer/initiator ratio were conducted, leading to the production of linear PCL samples of varying molecular weight distributions. The experimental data were subsequently used for the rigorous estimation of kinetic parameters associated with the elementary reaction steps in the assumed kinetic scheme. The results of the model predictions are compared with experimental data with decent agreement, revealing that although the reaction dynamics are significantly slower for ROP of ε ‐caprolactone than for L,L‐lactide, the original kinetic scheme previously validated for polylactide production can be successfully used to model the PCL production process.
- Open Access
- 30 March 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (16) , 6958-6969
Synthesis of thermo-shear-responsive dynamic covalent networks based on humins and the Diels–Alder reaction
Biorefinery-derived humins act as diene sources in Diels–Alder chemistry, showing high endo selectivity and enabling the formation of dynamic covalent networks.
- 30 March 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (16) , 6958-6969
Open AccessSynthesis of thermo-shear-responsive dynamic covalent networks based on humins and the Diels–Alder reaction
Biorefinery-derived humins act as diene sources in Diels–Alder chemistry, showing high endo selectivity and enabling the formation of dynamic covalent networks.
- Open Access
- 26 January 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Photocatalytic Functionalization of iPP under UV and Mild Conditions: From Direct Surface Activation to Blend Compatibilization
Post-polymerization functionalization of isotactic polypropylene (iPP) represents a key strategy to overcome its inherently non-polar nature and enhance interfacial compatibility and strength. However, conventional methods and materials, while widely employed, still suffer from significant limitations in terms of quality and performance. Here, we report an alternative approach to functionalize both solid iPP surfaces and iPP molecular chains using a UV-driven photocatalytic method. We demonstrate that this strategy, conducted under aerobic conditions in the presence of maleic anhydride (MAH), can transform iPP surfaces into polar analogues with remarkable shelf-life stability. Complementarily, the same approach is applied under inert conditions to synthesize high-molecular-weight iPP-graft-MAH, which is subsequently utilized as a phase compatibilizer in blends with polycaprolactone and natural wood.
- 26 January 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessPhotocatalytic Functionalization of iPP under UV and Mild Conditions: From Direct Surface Activation to Blend Compatibilization
Post-polymerization functionalization of isotactic polypropylene (iPP) represents a key strategy to overcome its inherently non-polar nature and enhance interfacial compatibility and strength. However, conventional methods and materials, while widely employed, still suffer from significant limitations in terms of quality and performance. Here, we report an alternative approach to functionalize both solid iPP surfaces and iPP molecular chains using a UV-driven photocatalytic method. We demonstrate that this strategy, conducted under aerobic conditions in the presence of maleic anhydride (MAH), can transform iPP surfaces into polar analogues with remarkable shelf-life stability. Complementarily, the same approach is applied under inert conditions to synthesize high-molecular-weight iPP-graft-MAH, which is subsequently utilized as a phase compatibilizer in blends with polycaprolactone and natural wood.
- Open Access
- 22 January 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Photocatalytic Functionalization of iPP under UV and Mild Conditions: From Direct Surface Activation to Blend Compatibilization
Post-polymerization functionalization of isotactic polypropylene (iPP) represents a key strategy to overcome its inherently non-polar nature and enhance interfacial compatibility and strength. However, conventional methods and materials, while widely employed, still suffer from significant limitations in terms of quality and performance. Here, we report an alternative approach to functionalize both solid iPP surfaces and iPP molecular chains using a UV-driven photocatalytic method. We demonstrate that this strategy, conducted under aerobic conditions in the presence of maleic anhydride (MAH), can transform iPP surfaces into polar analogues with remarkable shelf-life stability. Complementarily, the same approach is applied under inert conditions to synthesize high-molecular-weight iPP-graft-MAH, which is subsequently utilized as a phase compatibilizer in blends with polycaprolactone and natural wood.
- 22 January 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessPhotocatalytic Functionalization of iPP under UV and Mild Conditions: From Direct Surface Activation to Blend Compatibilization
Post-polymerization functionalization of isotactic polypropylene (iPP) represents a key strategy to overcome its inherently non-polar nature and enhance interfacial compatibility and strength. However, conventional methods and materials, while widely employed, still suffer from significant limitations in terms of quality and performance. Here, we report an alternative approach to functionalize both solid iPP surfaces and iPP molecular chains using a UV-driven photocatalytic method. We demonstrate that this strategy, conducted under aerobic conditions in the presence of maleic anhydride (MAH), can transform iPP surfaces into polar analogues with remarkable shelf-life stability. Complementarily, the same approach is applied under inert conditions to synthesize high-molecular-weight iPP-graft-MAH, which is subsequently utilized as a phase compatibilizer in blends with polycaprolactone and natural wood.
- Open Access
- 30 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Synthesis of Thermo-Responsive Dynamic Covalent Networks based on Humins and the Diels-Alder Reaction
Humins are unavoidable by-products of biorefineries that convert sugars into functional platform chemicals. In this work, we present a strategy for utilizing them as reagents in Diels-Alder (DA) reactions. By leveraging their furan-rich structure, we demonstrate their principal reactivity with conventional dienophiles such as bismaleimides, which enables the formation of stable, reprocessable dynamic covalent networks. Notably, occurring cycloadditions are enantioselective yielding exclusively endo-adducts. Furthermore, these DA reactions display an unusual, reversed character, with the forward reaction proceeding at high temperature and the retro-DA reaction occurring at low temperature. The obtained materials exhibit tunable thermal and mechanical properties, self-healing behavior, and the potential for modulating electrical conductivity. Taken together, our findings establish a practical pathway for valorizing biorefinery side streams through the conversion of humins into high-performance materials.
- 30 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessSynthesis of Thermo-Responsive Dynamic Covalent Networks based on Humins and the Diels-Alder Reaction
Humins are unavoidable by-products of biorefineries that convert sugars into functional platform chemicals. In this work, we present a strategy for utilizing them as reagents in Diels-Alder (DA) reactions. By leveraging their furan-rich structure, we demonstrate their principal reactivity with conventional dienophiles such as bismaleimides, which enables the formation of stable, reprocessable dynamic covalent networks. Notably, occurring cycloadditions are enantioselective yielding exclusively endo-adducts. Furthermore, these DA reactions display an unusual, reversed character, with the forward reaction proceeding at high temperature and the retro-DA reaction occurring at low temperature. The obtained materials exhibit tunable thermal and mechanical properties, self-healing behavior, and the potential for modulating electrical conductivity. Taken together, our findings establish a practical pathway for valorizing biorefinery side streams through the conversion of humins into high-performance materials.
- 16 July 2025
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 46 (19) , e00385
Photocatalytic Transformation of Isotactic Polypropylene Using Phthalimide N‐Oxyl Radicals Under Mild Conditions
Incorporating polar functionality into C(sp3)─H bonds in isotactic polypropylene (iPP) without compromising its molecular weight during post‐polymerization modification has long been a challenge due to competing chain degradation reactions. Here, a facile, radically mediated approach is presented that enables chain functionalization without chain scission. To achieve this, a photocatalytic process is designed that operates under mild conditions, maintaining iPP in a gel state. Using a reusable immobilized photocatalyst under 455 nm light and N‐hydroxyphthalimide (NHPI) as a cocatalyst, the method uses active and stable phthalimide N‐oxyl radicals (PINO) to activate iPP gels via a hydrogen atom transfer (HAT) at temperatures as low as 50°C, followed by chain functionalization. Based on the comprehensive synthetic, structural, rheological, surface, and mechanical studies, it is demonstrated that controlling NHPI‐to‐radical scavenger stoichiometry under inert conditions enables maleic anhydride functionalization of industrial iPP regioselective to tertiary carbon without any loss in molecular weight. This approach is further extended to upcycle iPP by fully deconstructing it into narrowly dispersed hydrocarbons through a cascade of chain scissions under 367 nm irradiation. Building on molecular functionalization, the interfacial activity of PINO is revealed, allowing for direct solid surface functionalization in water, hereby creating polar interfaces with exceptional stability.
- 16 July 2025
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 46 (19) , e00385
Photocatalytic Transformation of Isotactic Polypropylene Using Phthalimide N‐Oxyl Radicals Under Mild Conditions
Incorporating polar functionality into C(sp3)─H bonds in isotactic polypropylene (iPP) without compromising its molecular weight during post‐polymerization modification has long been a challenge due to competing chain degradation reactions. Here, a facile, radically mediated approach is presented that enables chain functionalization without chain scission. To achieve this, a photocatalytic process is designed that operates under mild conditions, maintaining iPP in a gel state. Using a reusable immobilized photocatalyst under 455 nm light and N‐hydroxyphthalimide (NHPI) as a cocatalyst, the method uses active and stable phthalimide N‐oxyl radicals (PINO) to activate iPP gels via a hydrogen atom transfer (HAT) at temperatures as low as 50°C, followed by chain functionalization. Based on the comprehensive synthetic, structural, rheological, surface, and mechanical studies, it is demonstrated that controlling NHPI‐to‐radical scavenger stoichiometry under inert conditions enables maleic anhydride functionalization of industrial iPP regioselective to tertiary carbon without any loss in molecular weight. This approach is further extended to upcycle iPP by fully deconstructing it into narrowly dispersed hydrocarbons through a cascade of chain scissions under 367 nm irradiation. Building on molecular functionalization, the interfacial activity of PINO is revealed, allowing for direct solid surface functionalization in water, hereby creating polar interfaces with exceptional stability.