Yucong Yin

The collapse of surface goaf beneath highways can result in instability and damage to roadbeds. However, filling the goaf areas with foam concrete can significantly enhance the stability of the roadbeds while considerably reducing the costs of filling materials. This study analyzes the effects on destructive characteristics, mechanical properties, stress–strain curve features, and relevant metrics, while also observing the microstructure of basalt fiber-calcined gangue-silty clay foam concrete (BF-CCG-SCFC). The results indicate that the water–binder ratio significantly influences the cubic compressive strength, split tensile strength, and fluidity of BF-CCG-SCFC. Silty clay reduces the cubic compressive strength, split tensile strength, and fluidity of BF-CCG-SCFC. Conversely, an appropriate amount of calcined gangue and basalt fiber significantly increases the cubic compressive strength and split tensile strength, while decreasing fluidity. To satisfy the strength and fluidity requirements of the filler material in hollow areas, the optimal water–binder ratio for BF-CCG-SCFC is 0.55, the ideal mixing ratio of calcined gangue to silty clay is 2:2, and the basalt fiber content should be 1%. The study examines the influence of varying water–binder ratios, the combined proportions of calcined gangue and silty clay, and different basalt fiber contents on the elastic modulus, peak stress, and peak strain of BF-CCG-SCFC. Additionally, the water–binder ratio influences the matrix strength through the non-hydration reactions of doped particles, while gangue and clay induce a “gradient hydration effect” during the hydration process. The incorporation of basalt fibers enhances the mechanical interlocking between the fibers and the matrix.

The extent of the plastic zone is critical in determining the stability and extent of damage to the surrounding rock in tunnels, crucial for designing support structures and thermal insulation layers. This study focuses on understanding how rock thermal stress affects the expansion of the plastic zone in deep-buried tunnels subjected to high geothermal temperatures, based on the derivation of the boundary line formula of the plastic zone in a high geothermal tunnel, and combined with the test results of the hydraulic fracturing method in a high geothermal tunnel of the Bulunkou Hydropower Station in Xinjiang. The findings indicate that thermal stress in the rock mass slows the growth of the plastic zone but significantly increases its extent. However, the influence of thermal stress on the shape and size of the plastic zone is less significant compared to the lateral pressure coefficient. In conditions of high geothermal temperature and geostress, rock mass thermal stress induces substantial changes in the morphology and extent of the plastic zone, which cannot be overlooked and can lead to significant errors if not properly considered. The theoretical formulas derived from engineering analysis, along with observed patterns of plastic zone expansion, demonstrate practical applicability.