SBSeungho Bang

Seungho Bang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Seungho Bang has a total of 79 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Thermally robust HZO/poly-Si ferroelectric stacks enabled by an ultrathin Ga2O3 interlayer

    by Junseo Namgung, Seungho Bang, Chihwan An, Seonjun Choi, Wooyoung Kang, Yu-Jun Jeong, Yeongseo Kim, Taewon Hwang, Yei Hwan Jung, Youngji Noh, et al.

  • Ultrawide Charge‐Trap Memory Window and Photoinduced Synaptic Behavior in p ‐Channel Amorphous Oxide Semiconductors

    by Seungho Bang, Deogkyu Choi, Hyeong Chan Suh, Chaewon Lee, Seoyoung Lim, Young Joo Yu, Dong Hyeon Kim, Sung Hyuk Kim, Jaekak Yoo, Taehoon Kim, et al.

    The decades‐long absence of high‐performance p ‐type amorphous oxide semiconductors (AOSs) remains a critical bottleneck in complementary circuit development and has severely limited exploration of charge trapping phenomena essential for neuromorphic computing. Here, we achieve a transformative breakthrough by demonstrating a p ‐channel amorphous oxide semiconductor through ultraviolet–ozone oxidation of crystalline tellurium to amorphous tellurium trioxide (a‐TeO 3 ). This revolutionary material integrates transistor, nonvolatile memory, photodetection, and synaptic functions in a single device, achieving an unprecedented level of functional integration. The a‐TeO 3 channel exhibits an unprecedented ultrawide memory window exceeding 58 V under ambient conditions, driven by oxygen vacancy–adsorbate interactions that enable robust multilevel switching. Ultraviolet illumination induces persistent photocurrent through carrier trapping/detrapping, enabling light‐programmable synaptic plasticity and associative learning. Paired with monolayer molybdenum disulfide n ‐mode charge‐trap memory (CTM), antagonistic charge‐trap dynamics realize autonomous heating/cooling control and precise homeostasis. Hardware‐constrained networks built on these complementary synaptic transistors achieve MNIST accuracy comparable to ideal digital systems. This light‐reconfigurable p ‐ n platform overcomes a critical materials barrier, unlocking scalable, energy‐efficient neuromorphic architectures for edge artificial intelligence.

  • Open Access

    Prediction and assessment of nanoprobe for tip-enhanced Raman spectroscopy: Data-driven artificial intelligence approach

    by Hyeong Chan Suh, Taehoon Kim, Dong-Joon Yi, Dong Hyeon Kim, Sung Hyuk Kim, Jaekak Yoo, Seungho Bang, Dohyeon Lee, Ji Hong Kim, Yo Seob Won, et al.

  • Open Access

    Flattening Energy Puddles for Enhanced Charge Transport in Wrinkled WSe 2

    by Dae Young Park, Taehoon Kim, Bora Kim, Nohyoon Park, Seungho Bang, Dohyeon Lee, Deogkyu Choi, Dong Hyeon Kim, Jaekak Yoo, Seung Mi Lee, et al.

    Wrinkles, a prevalent form of line defect in monolayer (1L) 2D materials, significantly degrade their optoelectronic performance by inducing local strain, energy puddles, and charge trapping. This study introduces a wrinkle‐selective strategy utilizing trioctylphosphine selenide (TOPSe), which exploits its steric hindrance and electron‐donating nature to selectively heal selenium vacancies at strained wrinkle sites in 1L‐WSe 2 . Comprehensive spectroscopic characterization—comprising Raman spectroscopy, photoluminescence spectroscopy, and femtosecond transient absorption microscopy—demonstrated substantial reductions in the defect density, suppressed non‐radiative recombination, and prolonged exciton lifetimes. Kelvin probe force microscopy further revealed wrinkle‐specific electron doping and spatial homogenization of the conduction band. Field‐effect transistors based on TOPSe‐treated 1L‐WSe 2 exhibited more than a two‐fold increase in current and mobility, in conjunction with a transition from p‐type to n‐type conduction. Our findings indicate that wrinkle‐targeted molecular engineering is a versatile approach for addressing intrinsic inhomogeneities in 2D materials and enabling high‐performance optoelectronic devices.


  • Open Access

    Thermally Robust HZO/poly-Si Ferroelectric Stacks Enabled by an Ultrathin Ga2O3 Interlayer

    by Junseo Namgung, Seungho Bang, Chihwan An, Seonjun Choi, Wooyoung Kang, Yu-Jun Jeong, Yeongseo Kim, Taewon Hwang, Yei Hwan Jung, Youngji Noh, et al.

    Hafnium oxide-based ferroelectrics have emerged as promising candidates for next-generation 3D NAND flash memory, addressing the scaling limitations and retention issues of conventional charge-trap technology. However, integrating these materials with polycrystalline silicon (poly-Si) channels is challenged by the high thermal budget (>800 °C) required for channel activation. Such elevated temperatures promote the growth of a parasitic low-permittivity SiOx layer and generate metallic defects at the interface, leading to severe electric field screening and ferroelectric degradation. In this work, we demonstrate a thermally stable TiN/Hf0.5Zr0.5O2 (HZO)/poly-Si gate stack incorporating an ultrathin (~1 nm) Ga2O3 interlayer to mitigate these interfacial issues. The Ga2O3 interlayer acts as a robust oxygen diffusion barrier, suppressing interfacial redox reactions and preserving HZO stoichiometry even after annealing at 900 °C. Consequently, whereas devices without the interlayer exhibit a negligible ferroelectric switching behavior, devices with the interlayer maintain a high orthorhombic phase fraction (~73%) and exhibit robust switching with a remanent polarization of ~38 µC/cm2. These results demonstrate that Ga2O3 is a critical enabler for integrating HZO ferroelectrics into poly-Si process flow for future 3D NAND flash memory applications.

  • High-Performance P-type Tellurium Field-Effect Transistors by Lignin-Induced Doping

    by Hyun Jeong, In Cheol Choi, Chan Kwon, Seungho Bang, Ji-Hong Kim, Chaewon Lee, Hyung Mo Jeong, Mun Seok Jeong

    The commercial viability of two-dimensional (2D) electronic devices is highly dependent on the availability of high-performance p-type semiconductors, yet the reliance on complex or environmentally detrimental dopants remains a critical obstacle. Here, we introduce a highly efficient and sustainable p-type doping strategy utilizing lignin, a naturally derived, eco-friendly biopolymer, for 2D tellurium (Te) field-effect transistors (FETs). Comprehensive spectroscopic analysis confirms a robust electronic interaction and spontaneous electron transfer mechanism between the lignin layer and the 2D Te channel, leading to effective p-type enhancement. Electrical transport characterization demonstrates that this lignin-induced doping yields remarkable device metrics: specifically, the on/off current ratio is improved by 810-fold, and the hole mobility is significantly enhanced, reaching an impressive value of up to 790 cm2 V-1 s-1. This study demonstrates a powerful, low-cost, and large-area processable green doping technology that simultaneously provides superior device characteristics and environmental compatibility, representing a significant advancement toward the industrial application of 2D FETs.

  • Passivation of Indium Selenide: Suppressing Polymer-Induced Doping through Redox Activation

    by Jieun Jo, Chan Kwon, Hyeon Jung Park, Chaewon Lee, Ha Neul Kim, Taehoon Kim, Ga Hyun Cho, Seungho Bang, Dae Young Park, Mun Seok Jeong

    Polymers have played a critical role as passivation and dielectric layers in two-dimensional semiconductor device applications. However, the impact of functional groups in polymers, which can significantly affect channel materials and induce undesirable doping effects, remains largely unexplored. Here, we focused on the influence of functional groups on the channel material and investigated methods to mitigate the abnormal doping effects, thereby enhancing polymer stability. To achieve this, a novel composite passivation layer was introduced to stabilize the partial charges within the polymer. The composite was prepared by simply mixing benzyl viologen (BV) into poly(methyl methacrylate) (PMMA). Utilizing Raman spectroscopy and electrical characterization based on field-effect transistor measurements, we systematically investigated the impacts of polymer on indium selenide (InSe). The results highlight the p-type doping effect induced by PMMA on InSe and demonstrate effective charge neutralization achieved by the PMMA/BV composite. Our findings offer new insights into improving polymer stability and durability in next-generation electronic applications.

  • Open Access

    High Performance P‐Channel Transistor Based on Amorphous Tellurium Trioxide

    by Seungho Bang, Chaewon Lee, Deogkyu Choi, Dae Young Park, Dong Hyeon Kim, Dohyeon Lee, Dong‐Joon Yi, Jungeun Song, Seok Joon Yun, Dong‐Wook Kim, et al.

    The development of high‐performance p‐channel transistors remains a critical challenge in complementary logic circuits, despite significant advances in n‐channel transistor technologies. While amorphous oxide semiconductors have revolutionized n‐type transistors, achieving comparable performance for p‐type counterparts has proven elusive. Here, this study demonstrates a breakthrough in p‐channel technology by transforming crystalline 2D tellurium (2D‐Te) into amorphous tellurium trioxide (a‐TeO 3 ) through UV ozone treatment. This structural transformation, directly observed via high‐resolution transmission electron microscopy, induces dramatic changes in electronic properties, including significant bandgap widening and enhanced work function. The resulting a‐TeO 3 ‐based p‐channel transistors demonstrate remarkable improvements over crystalline 2D‐Te transistors, featuring reduced hysteresis, superior on/off characteristics, and distinctive mobility behavior at different temperatures and gate fields. Most notably, these transistors achieve exceptionally low barrier height (10 meV) and sheet resistance values, while combining high hole mobility with excellent switching properties. The work not only introduces a novel high‐performance p‐channel semiconductor but also opens new avenues for phase engineering in advanced semiconductor development.


  • Harnessing Persistent Photocurrent in a 2D Semiconductor–Polymer Hybrid Structure: Electron Trapping and Fermi Level Modulation for Optoelectronic Memory

    by Seungho Bang, Wooyoung Kang, Dohyeong Kim, Hyeong Chan Suh, Dong Hyeon Kim, Chan Kwon, Jieun Jo, Ji-Hong Kim, Hayoung Ko, Ki Kang Kim, et al.

    Recently, 2D semiconductor-based optoelectronic memory has been explored to overcome the limitations of conventional von Neumann architectures by integrating optical sensing and data storage into one device. Persistent photocurrent (PPC), essential for optoelectronic memory, originates from charge carrier trapping according to the Shockley-Read-Hall (SRH) model in 2D semiconductors. The quasi-Fermi level position influences the activation of charge-trapping sites. However, the correlation between quasi-Fermi level modulations and PPC in 2D semiconductors has not been extensively studied. In this study, we demonstrate optoelectronic memory based on a 2D semiconductor-polymer hybrid structure and confirm that the underlying mechanism is charge trapping, as the SRH model explains. Under light illumination, electrons transfer from polyvinylpyrrolidone to p-type tungsten diselenide, resulting in high-level injection and majority carrier-type transitions. The quasi-Fermi level shifts upward with increasing temperature, improving PPC and enabling optoelectronic memory at 433 K. Our findings offer valuable insights into optimizing 2D semiconductor-based optoelectronic memory.


  • Localized surface plasmon-enhanced transparent conducting electrode for high-efficiency light emitting diode

    by Ja-Yeon Kim, Yoo-Hyun Cho, Tae-Hoon Chung, Young Jae Jang, Won Hee Kim, Seungho Bang, Ayoung Lee, Mun Seok Jeong, Jae-Hyun Ryou, Min-Ki Kwon