Qiang Jin
Qiang Jin has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Zhijun Guo
Radiochemistry Laboratory, School of Nuclear Science and Technology, Lanzhou University, 730000 Lanzhou, China; MOE Frontiers Science Center for Rare Isotopes, Lanzhou University, 730000 Lanzhou, China
5 shared publications Zongyuan Chen
5 shared publicationsDaming Zhang
2 shared publicationsQing Chang
Radiochemistry Laboratory, School of Nuclear Science and Technology
2 shared publicationsTengfei Cui
Radiochemistry Laboratory, School of Nuclear Science and Technology
2 shared publications- Zhen Xu
Radiochemistry Laboratory, School of Nuclear Science and Technology
2 shared publications
Latest Publications
- 25 June 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (27) , 15489-15502
Selective Am(III)/Eu(III) Separation by Asymmetric Phenanthroline Derivatives with Lateral Phosphonate and Pyrazole Groups
The separation of trivalent americium from lanthanides poses a significant challenge for nuclear waste management. In this study, we present a series of novel asymmetric tetradentate ligands PO-PzPhen, i.e., diethyl (9-(1H-pyrazol-1-yl)-1,10-phenanthrolin-2-yl)phosphonate (L1), dibutyl (9-(1H-pyrazol-1-yl)-1,10-phenanthrolin-2-yl)phosphonate (L2), bis(2-ethylhexyl) (9-(1H-pyrazol-1-yl)-1,10-phenanthrolin-2-yl)phosphonate (L3), diphenyl (9-(1H-pyrazol-1-yl)-1,10-phenanthrolin-2-yl)phosphonate (L4), and diethyl (9-(4-methyl-1H-pyrazol-1-yl)-1,10-phenanthrolin-2-yl)phosphonate (L5), which integrate lateral phosphonate and pyrazolyl groups on a phenanthroline core. By introducing hard/soft donor synergy, L1-L5 demonstrated robust extraction capabilities, high selectivity for Am(III) (SFAm/Eu reaching 49 for L3), and rapid extraction (equilibrium achieved within 10 min) under conditions of high acidity and favorable solubility in common diluents as well. The compositions of the extracted complexes, i.e., [ML(NO3)3] (M = Am(III) or Eu(III); L = L1-L5), were characterized using slope analysis, high-resolution mass spectrometry, and time-resolved fluorescence spectroscopy. X-ray crystallographic analysis established the precise 1:1 (M:L) coordination geometry, demonstrating that all N- and O-donors are involved in the metal-ligand interaction. On the basis of these structural insights, DFT calculations were employed to further elucidate the mechanisms for the Am(III) selectivity and relatively rapid extraction kinetics, highlighting the lower rotation energy and enhanced intrinsic binding affinity toward actinides. This study demonstrates that the asymmetric ligands with multiple functional groups can synergistically optimize solvent extraction performance, providing an efficient framework for the advanced partitioning of trivalent minor actinides from high-level radioactive wastes.
- 25 June 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (27) , 15489-15502
Selective Am(III)/Eu(III) Separation by Asymmetric Phenanthroline Derivatives with Lateral Phosphonate and Pyrazole Groups
The separation of trivalent americium from lanthanides poses a significant challenge for nuclear waste management. In this study, we present a series of novel asymmetric tetradentate ligands PO-PzPhen, i.e., diethyl (9-(1H-pyrazol-1-yl)-1,10-phenanthrolin-2-yl)phosphonate (L1), dibutyl (9-(1H-pyrazol-1-yl)-1,10-phenanthrolin-2-yl)phosphonate (L2), bis(2-ethylhexyl) (9-(1H-pyrazol-1-yl)-1,10-phenanthrolin-2-yl)phosphonate (L3), diphenyl (9-(1H-pyrazol-1-yl)-1,10-phenanthrolin-2-yl)phosphonate (L4), and diethyl (9-(4-methyl-1H-pyrazol-1-yl)-1,10-phenanthrolin-2-yl)phosphonate (L5), which integrate lateral phosphonate and pyrazolyl groups on a phenanthroline core. By introducing hard/soft donor synergy, L1-L5 demonstrated robust extraction capabilities, high selectivity for Am(III) (SFAm/Eu reaching 49 for L3), and rapid extraction (equilibrium achieved within 10 min) under conditions of high acidity and favorable solubility in common diluents as well. The compositions of the extracted complexes, i.e., [ML(NO3)3] (M = Am(III) or Eu(III); L = L1-L5), were characterized using slope analysis, high-resolution mass spectrometry, and time-resolved fluorescence spectroscopy. X-ray crystallographic analysis established the precise 1:1 (M:L) coordination geometry, demonstrating that all N- and O-donors are involved in the metal-ligand interaction. On the basis of these structural insights, DFT calculations were employed to further elucidate the mechanisms for the Am(III) selectivity and relatively rapid extraction kinetics, highlighting the lower rotation energy and enhanced intrinsic binding affinity toward actinides. This study demonstrates that the asymmetric ligands with multiple functional groups can synergistically optimize solvent extraction performance, providing an efficient framework for the advanced partitioning of trivalent minor actinides from high-level radioactive wastes.
- 22 June 2026
- Published by Elsevier in Applied Geochemistry
- Vol. 207
Transport and remobilization of Eu(III)-silicate colloids in a simulated fractured granite-groundwater system
- 22 June 2026
- Published by Elsevier in Applied Geochemistry
- Vol. 207
Transport and remobilization of Eu(III)-silicate colloids in a simulated fractured granite-groundwater system
- 5 December 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (49) , 33377-33386
Incorporating Primary Aggregate Heterogeneity into DLVO Theory: A Case Study on Heteroaggregation of Silica and Goethite Colloids
Colloid interactions are usually interpreted using the classic Derjaguin-Landau-Verwey-Overbeek (DLVO) theory and its variants. However, the repulsive interaction energy given in some DLVO predictions was sometimes inconsistent with the observed aggregation in heterogeneous colloidal systems containing different types of colloids. To address this issue, we studied the heteroaggregation of silica and goethite colloids, two oppositely charged colloids commonly found in the environment, as functions of colloid mass ratio, pH and ionic strength. We found that the discrepancies between experimental observations and DLVO predictions can be attributed to the heterogeneous surface charge distributions of the primary aggregates, contradicting the DLVO assumption of homogeneously charged primary aggregates. Consequently, a new method considering the effect of heterogeneity, was developed to quantitatively evaluate the interaction energies between primary heteroaggregates based on the electrostatic and van der Waals interactions (Hetero-DLVO). The interaction energies, evaluated by considering all pairwise interactions among the component colloids of the two primary aggregates (i.e., silica-silica, goethite-goethite, and silica-goethite), showed good agreement with experimental observations under various conditions. This study contributes to a better understanding of heteroaggregation mechanisms, improved DLVO-based prediction strategies for heterogeneous colloidal systems, and facilitates accurate predictions of colloidal particle behavior in aquatic systems.
- 5 December 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (49) , 33377-33386
Incorporating Primary Aggregate Heterogeneity into DLVO Theory: A Case Study on Heteroaggregation of Silica and Goethite Colloids
Colloid interactions are usually interpreted using the classic Derjaguin-Landau-Verwey-Overbeek (DLVO) theory and its variants. However, the repulsive interaction energy given in some DLVO predictions was sometimes inconsistent with the observed aggregation in heterogeneous colloidal systems containing different types of colloids. To address this issue, we studied the heteroaggregation of silica and goethite colloids, two oppositely charged colloids commonly found in the environment, as functions of colloid mass ratio, pH and ionic strength. We found that the discrepancies between experimental observations and DLVO predictions can be attributed to the heterogeneous surface charge distributions of the primary aggregates, contradicting the DLVO assumption of homogeneously charged primary aggregates. Consequently, a new method considering the effect of heterogeneity, was developed to quantitatively evaluate the interaction energies between primary heteroaggregates based on the electrostatic and van der Waals interactions (Hetero-DLVO). The interaction energies, evaluated by considering all pairwise interactions among the component colloids of the two primary aggregates (i.e., silica-silica, goethite-goethite, and silica-goethite), showed good agreement with experimental observations under various conditions. This study contributes to a better understanding of heteroaggregation mechanisms, improved DLVO-based prediction strategies for heterogeneous colloidal systems, and facilitates accurate predictions of colloidal particle behavior in aquatic systems.
- 14 October 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (42) , 21025-21036
Selective Am(III)/Eu(III) Separation by C–N Coupling Phenanthroline-Derived Bis(pyrazole) Ligands
The separation of trivalent actinides (An(III)) from lanthanides (Ln(III)) is a critical challenge in nuclear waste management, as it enables the reduction of long-term radiotoxicity and supports advanced fuel cycle strategies. Herein, we report a series of tetradentate N-donor ligands (L1-L4) derived from a straightforward C-N coupling reaction between 2,9-dichloro-1,10-phenanthroline (Phen) and pyrazole (Pz) derivatives, i.e., 2,9-bis(1H-pyrazol-1-yl)-1,10-phenanthroline (L1), 2,9-bis(4-ethyl-1H-pyrazol-1-yl)-1,10-phenanthroline (L2), 2,9-bis(4-butyl-1H-pyrazol-1-yl)-1,10-phenanthroline (L3), and 2,9-bis(3-butyl-1H-pyrazol-1-yl)-1,10-phenanthroline (L4). These ligands exhibit exceptional Am(III) extraction efficiency and selectivity, achieving separation factors (SFAm/Eu) exceeding 220 in highly acidic HNO3 media. Slope analysis and electrospray ionization mass spectrometry (ESI-MS) confirmed a 1:1 M/L stoichiometry for the extracted species. Systematic UV-vis titration and single-crystal X-ray diffraction studies revealed an analogous 1:1 coordination structure in solution and solid states. The stability constants for Eu(III) followed the trend of L3 (5.92 ± 0.08) > L2 (5.75 ± 0.11) > L1 (5.56 ± 0.06) > L4 (5.31 ± 0.02), reflecting the interplay of inductive effects and steric hindrance imposed by alkyl substituents on the pyrazole moieties of the ligands. This work highlights the potential of C-N-coupled bis(pyrazole)phenanthroline ligands as highly selective extractants for An(III)/Ln(III) separation under acidic conditions.
- 14 October 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (42) , 21025-21036
Selective Am(III)/Eu(III) Separation by C–N Coupling Phenanthroline-Derived Bis(pyrazole) Ligands
The separation of trivalent actinides (An(III)) from lanthanides (Ln(III)) is a critical challenge in nuclear waste management, as it enables the reduction of long-term radiotoxicity and supports advanced fuel cycle strategies. Herein, we report a series of tetradentate N-donor ligands (L1-L4) derived from a straightforward C-N coupling reaction between 2,9-dichloro-1,10-phenanthroline (Phen) and pyrazole (Pz) derivatives, i.e., 2,9-bis(1H-pyrazol-1-yl)-1,10-phenanthroline (L1), 2,9-bis(4-ethyl-1H-pyrazol-1-yl)-1,10-phenanthroline (L2), 2,9-bis(4-butyl-1H-pyrazol-1-yl)-1,10-phenanthroline (L3), and 2,9-bis(3-butyl-1H-pyrazol-1-yl)-1,10-phenanthroline (L4). These ligands exhibit exceptional Am(III) extraction efficiency and selectivity, achieving separation factors (SFAm/Eu) exceeding 220 in highly acidic HNO3 media. Slope analysis and electrospray ionization mass spectrometry (ESI-MS) confirmed a 1:1 M/L stoichiometry for the extracted species. Systematic UV-vis titration and single-crystal X-ray diffraction studies revealed an analogous 1:1 coordination structure in solution and solid states. The stability constants for Eu(III) followed the trend of L3 (5.92 ± 0.08) > L2 (5.75 ± 0.11) > L1 (5.56 ± 0.06) > L4 (5.31 ± 0.02), reflecting the interplay of inductive effects and steric hindrance imposed by alkyl substituents on the pyrazole moieties of the ligands. This work highlights the potential of C-N-coupled bis(pyrazole)phenanthroline ligands as highly selective extractants for An(III)/Ln(III) separation under acidic conditions.
- 13 June 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 129 (29) , 6553-6561
Infrared Spectra of UFn (n = 1–4) in Solid Ne and Ar Matrices: Symmetry-Breaking D2d Structure of UF4
This study addresses two persistent challenges in uranium fluoride chemistry: resolving decades-long spectral assignment conflicts across UF2, UF3, and UF4 species, and conclusively settling the symmetry controversy of UF4. By the cryogenic matrix isolation IR spectroscopy technique in combination with relativistic quantum chemical calculations, we experimentally tracked the stepwise formation of UF to UF6 in neon and argon matrices. Theoretical validation has led to a reassignment of the infrared absorption bands for UF2, UF3, and UF4, defining their molecular geometries. While UF2 exhibits a V-shaped C2v structure and UF3 has a pyramidal C3v configuration, UF4 adopts a D2d geometry rather than a Td symmetry, arising from the Jahn-Teller distortion, which was verified by complete active space second-order perturbation theory (CASPT2) calculations incorporating spin-orbit coupling, supporting predictions from relativistic density functional theory and BW-MRCCSD calculations by Johnson et al. Moreover, weak van der Waals interactions between UFn (n = 2-4) and argon atoms induced vibrational redshift. Bonding analyses revealed that U-F bonds in UFn (n = 1-6) possess dual ionic-covalent character, with ionic contributions of 78-88%. The covalent enhancement in fluorides arises from the overlap of U 5f/6d orbitals with F 2p orbitals and their near-degeneracy. These findings reconcile historical discrepancies, establish definitive benchmarks, and advance uranium fluoride chemistry for nuclear fuel applications.
- 13 June 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 129 (29) , 6553-6561
Infrared Spectra of UFn (n = 1–4) in Solid Ne and Ar Matrices: Symmetry-Breaking D2d Structure of UF4
This study addresses two persistent challenges in uranium fluoride chemistry: resolving decades-long spectral assignment conflicts across UF2, UF3, and UF4 species, and conclusively settling the symmetry controversy of UF4. By the cryogenic matrix isolation IR spectroscopy technique in combination with relativistic quantum chemical calculations, we experimentally tracked the stepwise formation of UF to UF6 in neon and argon matrices. Theoretical validation has led to a reassignment of the infrared absorption bands for UF2, UF3, and UF4, defining their molecular geometries. While UF2 exhibits a V-shaped C2v structure and UF3 has a pyramidal C3v configuration, UF4 adopts a D2d geometry rather than a Td symmetry, arising from the Jahn-Teller distortion, which was verified by complete active space second-order perturbation theory (CASPT2) calculations incorporating spin-orbit coupling, supporting predictions from relativistic density functional theory and BW-MRCCSD calculations by Johnson et al. Moreover, weak van der Waals interactions between UFn (n = 2-4) and argon atoms induced vibrational redshift. Bonding analyses revealed that U-F bonds in UFn (n = 1-6) possess dual ionic-covalent character, with ionic contributions of 78-88%. The covalent enhancement in fluorides arises from the overlap of U 5f/6d orbitals with F 2p orbitals and their near-degeneracy. These findings reconcile historical discrepancies, establish definitive benchmarks, and advance uranium fluoride chemistry for nuclear fuel applications.
- Open Access
- 12 July 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (29) , 32011-32020
Silica-Reinforced AMP–Calcium Alginate Beads for Efficient and Selective Removal of Cesium from a Strong Acidic Medium
Due to the significant selectivity for Cs+, ammonium molybdophosphate (AMP) possesses potential to uptake radiocesium from high-level liquid waste (HLLW), whereas its micro-crystalline structure and fine powder morphology limit its industrial application. Although the granulation method with alginate is prospective for the preparation of an AMP exchanger, the mechanical strength of obtained beads may be insufficient for application. In this context, we prepared silica-reinforced AMP-calcium alginate (ACS) beads and evaluated their performance for Cs+ removal from strong acidic solutions. It was found that the addition of silica in the fabrication significantly improved the mechanical strength of the beads in comparison to those without silica. Notably, the beads with an AMP/silica mass ratio of 1.0 exhibited an exceptional mechanical strength, surpassing that of ACS beads composed of other components. The batch experiment results indicated that the Cs+ adsorption follows a non-linear pseudo-second-order rate equation. The distribution coefficient of Cs+ was high even in extreme acidic conditions (∼1.6 × 102 mL/g in 8.0 mol/L HNO3 solution). The Cs+ adsorption can be well fitted with the Langmuir model, and the estimated maximum exchange capacity in 3.0 mol/L HNO3 could reach 23.9 mg/g. More importantly, ACS beads showed excellent selectivity toward Cs+ uptake over eight co-existing metal ions in simulated HLLW, with separation factor values all above 145. The column experiment exhibited that the beads can serve as the stationary phase in columns to effectively remove Cs+. The findings of this study are significant as they provide insights into the development of efficient materials for radiocesium removal from high-level liquid waste. The results demonstrate the potential of silica-reinforced ACS beads for Cs+ adsorption, with promising applications in industrial settings.
- 12 July 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (29) , 32011-32020
Open AccessSilica-Reinforced AMP–Calcium Alginate Beads for Efficient and Selective Removal of Cesium from a Strong Acidic Medium
Due to the significant selectivity for Cs+, ammonium molybdophosphate (AMP) possesses potential to uptake radiocesium from high-level liquid waste (HLLW), whereas its micro-crystalline structure and fine powder morphology limit its industrial application. Although the granulation method with alginate is prospective for the preparation of an AMP exchanger, the mechanical strength of obtained beads may be insufficient for application. In this context, we prepared silica-reinforced AMP-calcium alginate (ACS) beads and evaluated their performance for Cs+ removal from strong acidic solutions. It was found that the addition of silica in the fabrication significantly improved the mechanical strength of the beads in comparison to those without silica. Notably, the beads with an AMP/silica mass ratio of 1.0 exhibited an exceptional mechanical strength, surpassing that of ACS beads composed of other components. The batch experiment results indicated that the Cs+ adsorption follows a non-linear pseudo-second-order rate equation. The distribution coefficient of Cs+ was high even in extreme acidic conditions (∼1.6 × 102 mL/g in 8.0 mol/L HNO3 solution). The Cs+ adsorption can be well fitted with the Langmuir model, and the estimated maximum exchange capacity in 3.0 mol/L HNO3 could reach 23.9 mg/g. More importantly, ACS beads showed excellent selectivity toward Cs+ uptake over eight co-existing metal ions in simulated HLLW, with separation factor values all above 145. The column experiment exhibited that the beads can serve as the stationary phase in columns to effectively remove Cs+. The findings of this study are significant as they provide insights into the development of efficient materials for radiocesium removal from high-level liquid waste. The results demonstrate the potential of silica-reinforced ACS beads for Cs+ adsorption, with promising applications in industrial settings.
- 1 October 2014
- Published by Elsevier in Journal of Magnetism and Magnetic Materials
- Vol. 367, 64-68
Fabrication and microwave absorbent properties of Cobate zinc substituted W-type BaCoZnFe16O27
- 1 October 2014
- Published by Elsevier in Journal of Magnetism and Magnetic Materials
- Vol. 367, 64-68
Fabrication and microwave absorbent properties of Cobate zinc substituted W-type BaCoZnFe16O27