Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hao Xiong has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Multi-parameter collaborative optimization and performance evaluation of multimodal electro-hydraulic servo suspension system

    by Dingxuan Zhao, Hao Xiong, Haiwu Zheng

    Traditional single-mode suspensions are difficult to meet the compound demands of vehicles for high vibration reduction performance, operating reliability under varying road excitations, and low operating energy consumption. Existing studies on electro-hydraulic servo suspensions still have limitations in terms of unified multimodal coupling modeling, multi-parameter collaborative optimization, and the adaptability of conventional particle swarm optimization algorithms. This paper focuses on a multimodal electro-hydraulic servo suspension system and conducts a systematic study on system modeling, algorithm optimization, and performance evaluation. Based on a quarter-car model, the dynamic equations and hydraulic characteristic equations of the suspension system in passive, semi-active, and active modes are derived. An AMEsim-Simulink co-simulation model capable of representing the three operating modes through different valve-state configurations is constructed. To overcome the tendency of conventional particle swarm optimization to fall into local optima and the imbalance between global and local search capabilities, an improved particle swarm optimization algorithm integrating dynamic inertia weight and a random reflection wall strategy for out-of-bounds particles is proposed. A comprehensive objective function considering sprung mass acceleration, suspension working space, and tire dynamic load is constructed to achieve collaborative optimization of the damping apertures in passive mode and the PID gains in semi-active and active modes. Based on the filtered white noise method, random road excitations of Class A, B, and C were generated at a representative vehicle speed of 20 m/s. The optimization performance of PSO, GA, and IPSO and the vibration reduction performance of the optimized suspension system were evaluated under the considered road excitations. The results show that, under the considered Class A–C road excitations, the proposed IPSO achieves lower final fitness values and better convergence stability than conventional PSO and GA. Compared with the traditional single-damping passive suspension, the optimized passive, semi-active, and active modes generally improve the vibration reduction performance, while their advantages differ among road grades and evaluation indicators. These results provide a simulation basis for parameter tuning and subsequent mode-selection design of multimodal electro-hydraulic servo suspension systems.

  • Open Access

    Simulation Study on the Isothermal Aging Precipitation Process of Al3Sc in Al-Sc Alloys Using a High-Resolution Population Dynamics Model

    by Hao Xiong, Yufei Zhao, Wenyi Hao, Zhenzhi Sun, Xuechun Wang, Yao Xiao, Pengliang Ji, Guodong Fan

    Al-Sc alloys are widely applied in aerospace and automotive lightweighting owing to the excellent performance imparted by nano-sized Al3Sc precipitates. Accurate simulation of the full-cycle precipitation kinetics is critical for optimizing aging heat treatment processes, but the traditional Lifshitz-Slyozov-Wagner (LSW) theory is only applicable to the coarsening stage, while the conventional Kampmann-Wagner-Numerical (KWN) model suffers from severe numerical diffusion and fails to correct errors caused by discontinuous precipitate size distributions. To address these issues, a high-resolution population dynamics model based on the Van Leer limiter was established in this study, which is an improved KWN model that simultaneously considers interfacial energy transition during nucleation and coarsening and the effect of precipitate volume fraction on particle growth rate. Isothermal aging precipitation of Al3Sc in Al-0.2 wt.% Sc and Al-0.3 wt.% Sc alloys at 350 °C was systematically simulated, and key kinetic parameters including nucleation rate, critical nucleation radius, average precipitate radius, and normalized size distribution were calculated. The results show that the simulated average radius and normalized size distribution are in excellent agreement with experimental data, and the model accurately captures the plateau characteristic of average radius evolution during aging. Increasing Sc content significantly shortens the nucleation-growth stage and advances the onset of coarsening by approximately one order of magnitude. Compared with the LSW theory, the proposed model achieves second-order accuracy in smooth regions and suppresses spurious oscillations in discontinuous regions, fully reproducing the incubation, nucleation-growth, and coarsening stages of precipitation. This high-resolution model provides reliable theoretical support for the aging process optimization of Al-Sc alloys and offers an effective numerical method for precipitation kinetics simulation of other dilute binary alloys.

  • Study on the influence mechanism of asynchronous cold-formed forming on torsional defects of porous C-section strip

    by Yufei Zhao, Yi Han, Yao Xiao, Xintong Wang, Hao Xiong, Yinying Ren

    During the cold roll forming of porous C-section cable trays, although asynchronous oblique rolling overcomes the forming blind zones inherent to conventional rolling methods, it introduces uneven residual stresses that lead to circumferential twist. This distortion critically undermines product dimensional accuracy, assembly alignment, and long-term service reliability in practical engineering applications. Revealing that phase differences during rolling create counter-directional asymmetric stress fields across the profile, generating a torsional torque that manifests as twist upon unloading. The oblique roller spacing coefficient λ is defined to quantify pass arrangement. Proposing a novel stress-compensation strategy, including Modified Alternate Forming (MAF) and Alternate First Forming (AFF) methodologies. Results demonstrate λ = 1 MAF reduces twist angles from 2.88° to 0.91° (68.4% deformation decrease). This study has important guiding significance for high-precision cold bending forming processes.

  • Open Access

    Theoretical Analysis of IGAO-Fuzzy PID Fault-Tolerant Control and Performance Optimization for Electro-Hydraulic Active Suspensions Under Internal Leakage Faults

    by Haiwu Zheng, Hao Xiong, Dingxuan Zhao, Yufei Zhao, Yinying Ren, Yao Xiao, Yi Han

    To address performance degradation and control instability in electro-hydraulic servo active suspension systems due to internal leakage faults arising from wear and aging of hydraulic components, this paper proposes an innovative fuzzy PID fault-tolerant controller based on the Improved Giant Armadillo Optimization (IGAO) algorithm. Specifically, to overcome the limitations of the standard Giant Armadillo Optimization (GAO), which is prone to local optima and exhibits poor convergence performance when handling multi-constraint parameter optimization problems, this study introduces a nonlinear dynamic inertia weight mechanism and a random reflection strategy for out-of-bounds particles to improve the original algorithm’s performance. These enhancements significantly enhance its ability to balance global exploration and local exploitation. Furthermore, this research develops a comprehensive performance evaluation fitness function by quantifying key performance indicators such as body acceleration, suspension dynamic deflection, and tire dynamic load. A quarter-car model incorporating an internal leakage fault was established as a simulation validation platform to demonstrate the reliability of the proposed method. Simulation results indicate that under various road excitation conditions, the proposed IGAO algorithm can rapidly and stably converge to superior parameters for the fuzzy PID controller. Compared to the Particle Swarm Optimization (PSO) and standard GAO algorithm, the control system optimized by IGAO not only significantly more effectively suppresses body vibration and reduces shock amplitude but also exhibits stronger dynamic recovery performance and control robustness under varying degrees of internal leakage faults. This research provides a robust control approach for addressing internal parameter uncertainties in hydraulic systems and offers a new approach to theoretical modeling for enhancing the reliability of design and fault-tolerant control capabilities of active suspension systems.


  • Open Access

    Dynamic Error Improved Model-Free Adaptive Control Method for Electro-Hydraulic Servo Actuators in Active Suspensions with Time Delay and Data Disturbances

    by Hao Xiong, Dingxuan Zhao, Haiwu Zheng, Liqiang Zhao

    The Electro-Hydraulic Servo Actuator for Active Suspensions (ASEHSA) plays a decisive role in shaping the holistic performance of vehicle suspension systems through its dynamic response speed and control precision. However, achieving high-performance control of ASEHSA still faces challenges. On one hand, existing model-based control methods are highly sensitive to parameter uncertainties and unmodeled nonlinear hydraulic dynamics, which can easily lead to reduced robustness in practical applications. On the other hand, traditional model-free strategies have limited time-delay compensation capabilities and often struggle to balance overshoot and settling time under delayed and disturbed conditions. To resolve this challenge, this study proposes an improved model-free adaptive control method that incorporates the differentiation of the tracking error (DE-IMFAC). Within the framework of traditional model-free adaptive control (MFAC), this approach reconfigures the time-delay term from an explicit form in the control law to implicit management, substantially mitigating the influence of time delays on system control performance. At the same time, by refining the performance criterion function and integrating a tracking error differentiation term together with dynamic weighting factors, the dynamic performance and adjustment flexibility of the controller are significantly enhanced. Additionally, by leveraging the characteristic equation of discrete autonomous systems and compression mapping theory, the BIBO stability of the DE-IMFAC control system and the monotonic convergence of the tracking error are rigorously established through theoretical analysis. Simulation and experimental results demonstrate that, compared with PID and traditional MFAC methods, DE-IMFAC significantly reduces integral absolute error, overshoot, settling time, and maximum position tracking error, while improving disturbance rejection capability. This approach does not depend on an accurate mathematical model of the ASEHSA system and maintains robust dynamic performance under complex operating environments characterized by time delays and data disturbances, providing a practical solution for ASEHSA and related industrial control systems.


  • Open Access

    Ride comfort parameter optimization of hydro-pneumatic suspension based on discretely constrained genetic algorithm

    by Ziqi Huang, Dingxuan Zhao, Liqiang Wang, Hao Xiong, Zeguang Hu, Yinghe Li

    The genetic algorithm (GA) is capable of optimizing hydro-pneumatic suspension parameters based on multiple vehicle performance indices, thereby improving ride comfort. However, the conventional genetic algorithm can only perform continuous searches within a predefined numerical range, and the optimized parameters may not be consistent with practical constraints. To address this limitation, this study proposes a discrete constrained genetic algorithm (DCGA), which restricts optimization to a set of discrete candidate values. This approach ensures both the practicality of the optimized throttle valve orifice and the enhancement of ride comfort. In this work, the suspension system is simplified into a spring–damper model, and a one-fourth hydro-pneumatic suspension numerical model is developed in MATLAB–Simulink. The effects of suspension parameters on stiffness and damping characteristics are analyzed. Vertical acceleration signals of the unsprung mass under different road conditions are obtained using a tri-axial accelerometer. These signals are filtered with a bandwidth filter to suppress high-frequency noise and low-frequency drift, and subsequently integrated to derive vertical displacement and velocity, which are used as input for the unsprung mass. The proposed DCGA was employed to determine the optimal throttle valve orifice from a set of discrete candidate values, using the root mean square (RMS) values of vehicle body vertical displacement, vertical acceleration, and suspension dynamic deflection as performance evaluation metrics. Simulation results indicate that, under the discrete bump road condition, the optimized orifice reduces the RMS values of vehicle body vertical displacement, vertical acceleration, and suspension dynamic deflection by 41.6%, 65.3%, and 65.5%, respectively, compared with the initial throttle valve orifice. Under the random road condition, the corresponding reductions are 5.8%, 52.8%, and 82.2%, respectively.


  • Open Access

    IPSO-Optimized DE-MFAC Strategy for Suspension Servo Actuators Under Compound-Degradation Faults

    by Hao Xiong, Dingxuan Zhao, Haiwu Zheng, Xuechun Wang, Ziqi Huang, Zeguang Hu, Zhuangding Zhou, Liqiang Zhao, Liangpeng Li

    The dynamic response accuracy of suspension servo actuators directly determines the vibration-reduction performance of active-suspension systems. However, during long-term service, the system is prone to the influence of compound-degradation faults, such as internal leakage and time delay, leading to a significant decline in control performance. To address this issue, this paper proposes a collaborative control framework combining model-free adaptive control with a differential term of tracking error (DE-MFAC) and an improved particle swarm optimization (IPSO) algorithm. Firstly, to overcome the limitations of traditional model-free adaptive control (MFAC), a DE-MFAC strategy is constructed by implicitly handling the time-delay term and introducing the differential term of tracking error and dynamic weight factor into the performance index. Secondly, to enhance the parameter-tuning effect, the traditional particle swarm optimization (PSO) algorithm is improved (IPSO) by incorporating a dynamic inertia weight and an out-of-bounds random reflection mechanism, thereby strengthening the global optimization capability. On this basis, a suspension servo actuator system model incorporating internal leakage and time-delay faults is established based on the co-simulation platform of Simulink and AMESim, and the proposed method is validated. The simulation results show that, compared with the optimized traditional MFAC, the DE-MFAC tuned by IPSO exhibits superior position-tracking accuracy, faster response speed, and stronger overshoot-suppression capability under various compound-fault conditions. Further analysis indicates that the Integral of Absolute Cubic Error (IACE) function, due to its higher sensitivity to large deviations, can more effectively suppress overshoot and is suitable for engineering scenarios with strict requirements on dynamic performance. In addition, the optimization of control parameters using the IPSO algorithm can effectively compensate for the performance degradation caused by degradation faults, providing a feasible technical approach for extending the service life of actuators through adaptive adjustment.


  • Open Access

    Research on the hybrid redundancy leveling strategy for emergency rescue vehicles

    by Ziqi Huang, Zeguang Hu, Dingxuan Zhao, Zhuangding Zhou, Hao Xiong, Yinghe Li

    To address the wheel-lifting issue caused by the four-point highest-contact leveling strategy (FPHCLS), this study proposes a hybrid redundant leveling control strategy (HRLCS). First, a model of an emergency rescue vehicle was established and assembled in Matlab/Simulink/Simscape according to specific motion relationships, along with the construction of a hydraulic active suspension system. The vehicle model was then treated as a parallel mechanism, and the FPHCLS was applied to obtain the target displacement commands for the hydraulic actuators. A fuzzy PID controller was designed to ensure that three hydraulic actuators accurately tracked their target displacements, enabling the vehicle body to quickly level to the horizontal plane. Furthermore, inspired by compliant control in robotics, a force-displacement hybrid control was implemented for the right-front hydraulic actuator to maintain the desired pressure in the rodless chamber, ensuring continuous tire-ground contact during posture adjustment. Simulation results demonstrate that, when the vehicle traverses a single-side bridge obstacle and runs on a random road, the proposed HRLCS effectively reduces body pitch and roll motions. Compared with the passive suspension, the root mean square (RMS) values of the pitch and roll angles are reduced by 73% and 78%, respectively, when crossing the single-side bridge, while maintaining tire-ground contact at all times. On random roads, the RMS values of the pitch and roll angles are reduced by 61.2% and 43.4%, respectively.


  • Open Access

    Model-Free Multi-Parameter Optimization Control for Electro-Hydraulic Servo Actuators with Time Delay Compensation

    by Haiwu Zheng, Hao Xiong, Dingxuan Zhao, Yinying Ren, Shuoshuo Cao, Ziqi Huang, Zeguang Hu, Zhuangding Zhou, Liqiang Zhao, Liangpeng Li

    System time delays and nonlinear unmodeled dynamics severely constrain the control performance of the Active Suspension Electro-Hydraulic Servo Actuator (ASEHSA). To tackle these challenges, this paper presents a Dynamic Error Differentiation-based Model-Free Adaptive Control (DE-MFAC) strategy integrated with an Improved Particle Swarm Optimization (IPSO) algorithm. Established under the Model-Free Adaptive Control (MFAC) framework, the DE-MFAC integrates a dynamic error differentiation mechanism and an implicit expression of time delays, thus removing the dependence on a precise system model. The traditional PSO algorithm is improved by incorporating an inertia weight adjustment strategy and a boundary reflection wall strategy, which effectively mitigates the issues of local optima and boundary stagnation. In AMESim 2021, a 1/4 vehicle active suspension electro-hydraulic actuation system model is constructed. To ensure an impartial evaluation of controller performance, the IPSO algorithm is employed to optimize the parameters of the PID, MFAC, and DE-MFAC controllers, respectively. Co-simulations with Simulink 2023b are conducted under two time delay scenarios using a composite square-sine wave signal as the reference. The results indicate that all three IPSO-optimized controllers realize effective position tracking. Among them, the DE-MFAC controller exhibits the optimal performance, demonstrating remarkable advantages in reducing tracking errors and balancing settling time with overshoot. These findings verify the effectiveness of the proposed control strategy, time delay compensation mechanism, and optimization algorithm. Future research will involve validation on a physical ASEHSA platform, further exploration of the method’s applicability and robustness under diverse operating conditions, and extension to other industrial systems with similar nonlinear time delay features.


  • Open Access

    Research on LQR control of nonlinear active suspension cooperatively optimized by differential geometry and genetic algorithms

    by Haiwu Zheng, Hao Xiong, Ziqi Huang, Dingxuan Zhao

    With the continuous advancement of the automotive industry’s demand for driving comfort and handling stability, active suspension systems have become a research hotspot due to their ability to achieve effective balancing among multiple performance metrics. However, traditional active suspension control algorithms face challenges such as insufficient modeling accuracy and excessive reliance on empirical parameter optimization when dealing with nonlinear systems. To address these issues, this study proposes an improved linear quadratic regulator (LQR) control strategy that integrates differential geometry theory and genetic algorithm (GA) optimization to enhance the control performance of nonlinear active suspension systems. First, a quarter-car nonlinear active suspension model is established using differential geometry theory, effectively preserving the system’s nonlinear characteristics and improving modeling precision. Building on this foundation, an enhanced LQR controller is designed, combined with the global optimization capability of the genetic algorithm, to construct a fitness function based on multiple suspension performance metrics. This approach achieves automated optimization of the weight coefficient matrix and multi-objective balancing. To validate the effectiveness of the proposed control strategy, comparative simulations under discrete impact road and Class C random road conditions are conducted using the MATLAB-Simulink platform. Results demonstrate that, compared to PID control, the GA-LQR strategy reduces the root mean square (RMS) values of body vertical acceleration, suspension dynamic deflection, and tire dynamic displacement by 6.94%, 57.72%, and 4.4%, respectively, under discrete impact road conditions. Under Class C road conditions, these reductions further increase to 22.1%, 63.6%, and 16.25%. This study provides a high-performance and robust control strategy for nonlinear suspension systems, laying a theoretical foundation for improving overall vehicle performance and driving handling stability.