Mengxi Dang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Mengxi Dang has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Dongdong Zhao
School of Automation, Northwestern Polytechnical University, Xian, China
6 shared publications - Zhiguang Hua
School of Automation, Northwestern Polytechnical University, Xian, China
6 shared publications - Changliang Dang
School of Automation, Northwestern Polytechnical University, Xian, China
5 shared publications - Manfeng Dou
School of Automation, Northwestern Polytechnical University, Xian, China
5 shared publications - Shuhao Yan
School of Automation, Northwestern Polytechnical University, Xian, China
5 shared publications - Yuanlin Wang
Northwestern Polytechnical University
2 shared publications
Latest Publications
- 11 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 14 (3) , 3434-3446
Model-Free Predictive Current Control for SPMSMs With Adaptive Generalized Proportional–Integral Observer and Improved Finite-Time Gradient Method
Model-free predictive current control (MFPCC) with generalized proportional-integral observer (GPIO) eliminates the impact of flux and resistance, while maintaining excellent steady-state and dynamic performance. However, the control performance of MFPCC is impacted by the observer and inductance parameter. It is difficult for the conventional GPIO with a fixed bandwidth gain to balance the transient performance, disturbance suppression and noise sensitivity. Therefore, an adaptive GPIO (AGPIO) is proposed to solve this conflict, which utilizes a sigmoid-based adaptive law to determine the bandwidth gains adaptively. In addition, the control gain βc impacts the performance of MFPCC, which is set as the inverse of inductance. To reduce the impacts of inductance, an improved finite-time gradient method (FGM) is designed, which incorporates the FGM with adaptive optimization gain. It maintains lower steady-state fluctuations while ensuring rapid identification of the control gains. Comparative experiments on a SPMSM test bench verify the excellent control and harmonic rejection performance under parameter mismatch of the proposed method.
- 11 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 14 (3) , 3434-3446
Model-Free Predictive Current Control for SPMSMs With Adaptive Generalized Proportional–Integral Observer and Improved Finite-Time Gradient Method
Model-free predictive current control (MFPCC) with generalized proportional-integral observer (GPIO) eliminates the impact of flux and resistance, while maintaining excellent steady-state and dynamic performance. However, the control performance of MFPCC is impacted by the observer and inductance parameter. It is difficult for the conventional GPIO with a fixed bandwidth gain to balance the transient performance, disturbance suppression and noise sensitivity. Therefore, an adaptive GPIO (AGPIO) is proposed to solve this conflict, which utilizes a sigmoid-based adaptive law to determine the bandwidth gains adaptively. In addition, the control gain βc impacts the performance of MFPCC, which is set as the inverse of inductance. To reduce the impacts of inductance, an improved finite-time gradient method (FGM) is designed, which incorporates the FGM with adaptive optimization gain. It maintains lower steady-state fluctuations while ensuring rapid identification of the control gains. Comparative experiments on a SPMSM test bench verify the excellent control and harmonic rejection performance under parameter mismatch of the proposed method.
- 5 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (9) , 12378-12392
An Improved Model-Free Predictive Current Control for SPMSM Drives Based on Adaptive Extended State Observer With Robust Sliding Mode Speed Controller
Conventional ultralocal model-based model-free predictive current control using an extended state observer (ESO) based on an ultralocal model significantly promotes the robustness against motor parameter mismatch. However, a large bandwidth of ESO leads to an enhanced disturbance rejection capability, but the noise suppression performance will deteriorate. To address this issue, an adaptive extended state observer (AESO) with an adaptive bandwidth tuning scheme based on the estimated error was proposed, in which the observer bandwidth is automatically adjusted to reduce the estimation errors of system states and total uncertainty against the measurement noise. Accordingly, the different requirements of observer bandwidth under various operating conditions can be satisfied, and the performance of disturbance rejection and noise suppression is balanced. Moreover, the stability of the proposed AESO is proved based on the Lyapunov method. Furthermore, to improve the dynamic performance and robustness of the speed loop, a robust sliding mode speed controller based on a novel reaching law and a sliding mode observer is proposed to replace the conventional proportional-integral. The comparative experiments on a 1.9 kW surface-mounted permanent magnet synchronous motor are conducted to validate the superiority of the proposed control methods compared with traditional methods.
- 5 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (9) , 12378-12392
An Improved Model-Free Predictive Current Control for SPMSM Drives Based on Adaptive Extended State Observer With Robust Sliding Mode Speed Controller
Conventional ultralocal model-based model-free predictive current control using an extended state observer (ESO) based on an ultralocal model significantly promotes the robustness against motor parameter mismatch. However, a large bandwidth of ESO leads to an enhanced disturbance rejection capability, but the noise suppression performance will deteriorate. To address this issue, an adaptive extended state observer (AESO) with an adaptive bandwidth tuning scheme based on the estimated error was proposed, in which the observer bandwidth is automatically adjusted to reduce the estimation errors of system states and total uncertainty against the measurement noise. Accordingly, the different requirements of observer bandwidth under various operating conditions can be satisfied, and the performance of disturbance rejection and noise suppression is balanced. Moreover, the stability of the proposed AESO is proved based on the Lyapunov method. Furthermore, to improve the dynamic performance and robustness of the speed loop, a robust sliding mode speed controller based on a novel reaching law and a sliding mode observer is proposed to replace the conventional proportional-integral. The comparative experiments on a 1.9 kW surface-mounted permanent magnet synchronous motor are conducted to validate the superiority of the proposed control methods compared with traditional methods.
- 12 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 11 (4) , 9724-9739
A Sliding Mode Prediction Error Compensation of Incremental Model-Based Deadbeat Predictive Current Control for SPMSM Drives With a Sliding Mode Speed Controller
Due to high power density and excellent efficiency, permanent-magnet synchronous motors (PMSMs) provide extremely competitive technology for the driving applications of transportation electrification. Among the various advanced control strategies for PMSMs, deadbeat predictive current control (DPCC) has the advantages of fast dynamic response and remarkable steady-state current tracking performance. However, DPCC is heavily dependent on the accuracy of motor parameters (resistance, inductance, and flux linkage). To alleviate the effect of parameter mismatch and maintain the advantages of conventional DPCC, this article proposes a sliding mode prediction error compensation (SM-PEC) method of DPCC. First, a composite reaching law (CRL) is proposed to accelerate the convergence while suppressing the chattering. Then, an incremental prediction model of PMSM is developed, and the parameter sensitivity is analyzed. Combined with this model, a CRL-based SM-PEC method is proposed to eliminate the current tracking error, enhance the robustness, maintain the excellent dynamic performance of DPCC, and avoid dependence on observers. Moreover, a CRL-based sliding mode speed controller (SMSC) is designed to improve the performance of the speed regulation system. Finally, comprehensive experiments are implemented on a 1.6-kW PMSM experimental platform, and the results verify the effectiveness of the proposed control methods.
- 12 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 11 (4) , 9724-9739
A Sliding Mode Prediction Error Compensation of Incremental Model-Based Deadbeat Predictive Current Control for SPMSM Drives With a Sliding Mode Speed Controller
Due to high power density and excellent efficiency, permanent-magnet synchronous motors (PMSMs) provide extremely competitive technology for the driving applications of transportation electrification. Among the various advanced control strategies for PMSMs, deadbeat predictive current control (DPCC) has the advantages of fast dynamic response and remarkable steady-state current tracking performance. However, DPCC is heavily dependent on the accuracy of motor parameters (resistance, inductance, and flux linkage). To alleviate the effect of parameter mismatch and maintain the advantages of conventional DPCC, this article proposes a sliding mode prediction error compensation (SM-PEC) method of DPCC. First, a composite reaching law (CRL) is proposed to accelerate the convergence while suppressing the chattering. Then, an incremental prediction model of PMSM is developed, and the parameter sensitivity is analyzed. Combined with this model, a CRL-based SM-PEC method is proposed to eliminate the current tracking error, enhance the robustness, maintain the excellent dynamic performance of DPCC, and avoid dependence on observers. Moreover, a CRL-based sliding mode speed controller (SMSC) is designed to improve the performance of the speed regulation system. Finally, comprehensive experiments are implemented on a 1.6-kW PMSM experimental platform, and the results verify the effectiveness of the proposed control methods.
- 20 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 40 (3) , 1826-1840
Deadbeat Predictive Current Control Using Super-Twisting Observer for SPMSM Drives With Anti-Disturbance Sliding Mode Speed Controller
Deadbeat predictive current control (DPCC) has received widespread attention due to its fast dynamic response and good current tracking accuracy. However, DPCC suffers from internal disturbance, such as parameter mismatch, and external disturbance, such as external load change. Firstly, an anti-disturbance terminal sliding mode controller (ATSMC), consisting of a novel reaching law (NRL) based terminal sliding mode controller (TSMC) and an integral-type terminal sliding-mode observer (ITSMO) is developed to improve the performance of speed loop. ATSMC can accelerate the convergence velocity and suppress the chattering simultaneously. Furthermore, to promote the current tracking performance and anti-disturbance property of DPCC against various unknown disturbances, a super-twisting observer (STO) in discrete time is designed to eliminate the disturbance caused by parameter mismatch of conventional DPCC, and the estimated values are compensated for the voltage vector to enhance the robustness. Finally, experiments are implemented on a 1.7-kW surface-mounted permanent-magnet synchronous motor (SPMSM) experimental platform, and the results validate the superiority of the proposed method compared with conventional methods.
- 20 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 40 (3) , 1826-1840
Deadbeat Predictive Current Control Using Super-Twisting Observer for SPMSM Drives With Anti-Disturbance Sliding Mode Speed Controller
Deadbeat predictive current control (DPCC) has received widespread attention due to its fast dynamic response and good current tracking accuracy. However, DPCC suffers from internal disturbance, such as parameter mismatch, and external disturbance, such as external load change. Firstly, an anti-disturbance terminal sliding mode controller (ATSMC), consisting of a novel reaching law (NRL) based terminal sliding mode controller (TSMC) and an integral-type terminal sliding-mode observer (ITSMO) is developed to improve the performance of speed loop. ATSMC can accelerate the convergence velocity and suppress the chattering simultaneously. Furthermore, to promote the current tracking performance and anti-disturbance property of DPCC against various unknown disturbances, a super-twisting observer (STO) in discrete time is designed to eliminate the disturbance caused by parameter mismatch of conventional DPCC, and the estimated values are compensated for the voltage vector to enhance the robustness. Finally, experiments are implemented on a 1.7-kW surface-mounted permanent-magnet synchronous motor (SPMSM) experimental platform, and the results validate the superiority of the proposed method compared with conventional methods.
- 22 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 13 (2) , 1442-1454
Enhanced Deadbeat Predictive Current Control for SPMSM Drives Combining Robust Super-Twisting Terminal Sliding Mode Speed Controller
To promote the drive performance of surface-mounted permanent magnet synchronous motor (SPMSM), such as responsiveness, tracking accuracy, and anti-disturbance capability, an enhanced deadbeat predictive current control (DPCC) algorithm combining super-twisting terminal sliding mode is proposed in this paper. First, a novel SPMSM model considering parameter perturbation is derived. Subsequently, a super-twisting terminal sliding mode control (STSMC) scheme with a super-twisting observer (STO) is proposed to enhance the performance of the speed loop, with stability validated using Lyapunov theory. In addition, two extended state observers (ESOs) are developed to estimate the predictive error caused by parameter mismatch in the dq axis, respectively, and the estimated values are compensated with feedback to DPCC. Finally, the proposed control methods are implemented on an SPMSM platform and compared with conventional control methods under various operating conditions, and the comparison results prove the superiority.
- 22 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 13 (2) , 1442-1454
Enhanced Deadbeat Predictive Current Control for SPMSM Drives Combining Robust Super-Twisting Terminal Sliding Mode Speed Controller
To promote the drive performance of surface-mounted permanent magnet synchronous motor (SPMSM), such as responsiveness, tracking accuracy, and anti-disturbance capability, an enhanced deadbeat predictive current control (DPCC) algorithm combining super-twisting terminal sliding mode is proposed in this paper. First, a novel SPMSM model considering parameter perturbation is derived. Subsequently, a super-twisting terminal sliding mode control (STSMC) scheme with a super-twisting observer (STO) is proposed to enhance the performance of the speed loop, with stability validated using Lyapunov theory. In addition, two extended state observers (ESOs) are developed to estimate the predictive error caused by parameter mismatch in the dq axis, respectively, and the estimated values are compensated with feedback to DPCC. Finally, the proposed control methods are implemented on an SPMSM platform and compared with conventional control methods under various operating conditions, and the comparison results prove the superiority.
- Top Cited Papers
- 28 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 39 (4) , 2349-2361
An Improved Adaptive Sliding Mode Speed Control of PMSM Drives With an Extended State Observer
Aiming at the application occasions that require high dynamic performance of the drive motor speed controller, this paper proposes an adaptive sliding mode control (ASMC) with an extended state observer (ESO) to enhance the speed control performance of the permanent magnet synchronous motor (PMSM) against internal and external disturbances. Firstly, a new adaptive reaching law (ARL) is proposed, which can suppress the chattering effectively and reduce the convergence time of the system state. Based on ARL, the proposed ASMC for speed control of PMSM drives is developed, combined with an integral-type terminal sliding mode surface. Furthermore, by introducing the nonlinear term into the sliding mode control scheme, the convergence velocity to the equilibrium is improved and the finite-time convergence is guaranteed. Secondly, an ESO is developed to estimate the lumped disturbance for feedforward compensation and update the control algorithm of ASMC. The proposed ASMC+ESO control method enhances robustness against disturbances while maintaining fast dynamic response and high tracking accuracy. Finally, the proposed controller is implemented on a 0.4 kW PMSM test platform and the results confirm the validity.
- 28 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 39 (4) , 2349-2361
Top Cited PapersAn Improved Adaptive Sliding Mode Speed Control of PMSM Drives With an Extended State Observer
Aiming at the application occasions that require high dynamic performance of the drive motor speed controller, this paper proposes an adaptive sliding mode control (ASMC) with an extended state observer (ESO) to enhance the speed control performance of the permanent magnet synchronous motor (PMSM) against internal and external disturbances. Firstly, a new adaptive reaching law (ARL) is proposed, which can suppress the chattering effectively and reduce the convergence time of the system state. Based on ARL, the proposed ASMC for speed control of PMSM drives is developed, combined with an integral-type terminal sliding mode surface. Furthermore, by introducing the nonlinear term into the sliding mode control scheme, the convergence velocity to the equilibrium is improved and the finite-time convergence is guaranteed. Secondly, an ESO is developed to estimate the lumped disturbance for feedforward compensation and update the control algorithm of ASMC. The proposed ASMC+ESO control method enhances robustness against disturbances while maintaining fast dynamic response and high tracking accuracy. Finally, the proposed controller is implemented on a 0.4 kW PMSM test platform and the results confirm the validity.