AKAnton Khanas

Anton Khanas

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Anton Khanas has a total of 21 co-authors. Here are the top co-authors by number of shared publications:

  • Andrei Zenkevich

    Moscow Institute of Physics and Technology

    5 shared publications
  • Kirill Trunov

    Lab of Functional Materials and Devices for Nanoelectronics, Moscow Institute of Physics and Technology (National Research University) 1 , Institutsky lane 9, Dolgoprudny, Moscow region 141700

    2 shared publications
  • Nikita Zhidkov

    Lab of Functional Materials and Devices for Nanoelectronics, Moscow Institute of Physics and Technology (National Research University) , Institutsky Lane 9, Dolgoprudny, Moscow Region 141700

    2 shared publications
  • Yury Yu. Lebedinskii

    Center of Shared Research Facilities, Moscow Institute of Physics and Technology (National Research University) 2 , Institutsky lane 9, Dolgoprudny, Moscow region 141700

    2 shared publications
  • Alexander Morozov

    Center for Photonics and 2D Materials, Moscow Institute of Physics and Technology (National Research University) 3 , Institutsky lane 9, Dolgoprudny, Moscow region 141700

    1 shared publication
  • Christian Hebert

    Institut des Nano Sciences de Paris (INSP), CNRS UMR 7588, Sorbonne Université 1 , 4 Place Jussieu, 75252 Paris Cedex 05, France

    1 shared publication

Latest Publications

  • Phase engineering of vanadium oxide thin films enabled by oxygen pressure control and vacuum annealing

    by Kirill Trunov, Yury Lebedinskii, Sergey Zarubin, Ilya Zavidovskiy, Sergey Novikov, Alexander Morozov, Petr Shvets, Ksenia Maksimova, Andrei Zenkevich, Anton Khanas

    Vanadium oxides are known for a large diversity of crystalline phases with different interesting physical and chemical properties and a wide range of applications. However, due to the close stoichiometric composition of these phases, the growth parameters should be carefully adjusted for each VOx phase. In this work, we propose a method of vanadium oxide thin films phase engineering: growth of amorphous VOx in an oxygen atmosphere at room temperature, followed by vacuum annealing. Our method enables target synthesis of VO2, V4O9, V3O7, and V2O5 phases. A desired phase in a polycrystalline thin-film form can be obtained by finely tuning oxygen pressure during room temperature deposition while keeping other parameters constant. The synthesized thin films can be utilized for various applications: neuromorphic hardware, supercapacitors, sensors, and catalysis.

  • Multiple spiking functionalities in annealing-optimized Ag/Hf0.5Zr0.5O2-based memristive neurons

    by Nikita Zhidkov, Olga Permiakova, Andrei Zenkevich, Anton Khanas

    Rapid progress of artificial neural network applications in recent years has led to the issue of unprecedented energy consumption. It can be solved by the implementation of energy-efficient hardware based on non-von Neumann architectures, which requires the development of electronic components emulating the behavior of synapses and neurons. While research of synaptic elements is vast, the technology for the fabrication of scalable and highly reproducible neuronal elements is far less developed. In this work, we demonstrate an artificial neuron with multiple functionalities based on filamentary switching Ag/Hf0.5Zr0.5O2 (HZO) memristors. To improve the parameters of the memristors, we propose a two-step annealing method, which allows for better control of the crystallization of the functional dielectric layer (HZO) as well as of the diffusion of the active electrode (Ag) atoms. Furthermore, we demonstrate leaky integrate-and-fire neuronal behavior in multiple spiking modes: time-to-first-spike, number of spikes, and firing rate coding. Moreover, the neuron operation does not require the additional electronic overhead and is supported solely by an Ag/HZO memristor with a current limiting resistor connected in series. The presented results pave the way for the development of next-generation energy-efficient neuromorphic hardware operating on the principles of spiking neural networks.

  • Interface defects as the origin of breakdown in ferroelectric TiN/HZO/TiN memory capacitors subjected to electrical stress

    by Nikita Sizykh, Maksim Spiridonov, Anton Khanas, Andrei Zenkevich

    Alloyed Hf0.5Zr0.5O2 (HZO) ultrathin layers crystallized in a metastable non-centrosymmetric phase are the leading candidate for implementation of scaled ferroelectric devices due to their excellent CMOS compatibility and demonstrated integrability with TiN in industrial process flows. One of the key problems on the route of using HZO-based capacitors as functional parts of ferroelectric memory cells is that the cyclic electrical stress required to write and read the stored information sets off a gradual increase in the leakage current, leading to eventual breakdown in the HZO layer. The breakdown in dielectric oxide layers sandwiched between two metal electrodes is generally viewed as a defect-assisted process; however, the relative contributions from the bulk and interfaces depend on the material system and are still under intense investigation. Here, we report on the dramatic effect of the polarity of constant-voltage electrical stress on the lifetime prior to breakdown in the nominally symmetric TiN/HZO/TiN ferroelectric capacitors. At the same time, we observed that pulsed stress with the same amplitude and equivalent total time under stress does not lead to the breakdown of the HZO layer. The step-recovery with multi-pulse test (SRMPT) technique was employed to quantify the energy distribution of chargeable defects in the HZO bandgap. Our analysis suggests that electrical breakdown in TiN/HZO/TiN devices is governed by the evolution of preexisting charged oxygen-vacancy-related defects associated with chemically nonequivalent TiN/HZO interfaces formed during HZO crystallization annealing.

  • Multiferroic oxide nanostructures : multi-resistance states

    by Anton Khanas

    Nanostructures d'oxydes multiferroïques : états multi-résistances: Les nouveaux défis de la microélectronique depuis déjà deux décennies nécessitent le développement de matériaux et dispositifs bien au-delà des exigences de compatibilité avec la technologie silicium. Parmi ces défis figurent la miniaturisation des éléments de circuit intégrés et l’intégration 3D, pour surmonter le goulot d’étranglement de von Neumann, ainsi que l’élaboration de dispositifs neuromorphiques à base de memristors. Les fonctionnalités supplémentaires, offertes par la mise en œuvre de matériaux ferroélectriques et magnétiques, permettraient de réaliser des progrès significatifs dans tous les domaines évoqués. Dans cette thèse, nous étudions l’hétérostructure tri-couche multiferroïque (c’est-à-dire ferroélectrique et ferromagnétique simultanément) La0.7Sr0.3MnO3 / BaTiO3 / La0.7Sr0.3MnO3. Nous étudions en détail les propriétés structurales, chimiques et magnétiques des couches minces fabriquées ainsi que leurs interfaces pour établir les fondements nécessaires à la compréhension des expériences de transport électronique sur les dispositifs finaux. Dans les échantillons avec une barrière épaisse de BaTiO3, nous observons une commutation de résistance stochastique et une magnéto- résistance à champ faible plutôt complexe. Dans les dispositifs à barrière mince, nous démontrons la commutation de résistance quasi-analogique (sur de multiples niveaux de résistance) et mettons en évidence une forte dynamique temporelle, liée à la polarisation et aux lacunes d’oxygène. Le comportement de notre memristor s’avère reproduire idéalement celui des synapses biologiques, en particulier concernant les effets de second ordre intervenant dans la transmission des impulsions neuronales et qui proviennent de la dynamique transitoire d’ions Ca2+. Via la mise en place d’expériences adaptées, nous mettons en exergue plusieurs réponses synaptiques de second ordre dans notre memristor multiferroïque. Nos résultats suggèrent un nouveau concept physique de memristor de second ordre pour l’émulation bioréaliste des synapses et constituent une première étape dans la mise en œuvre matérielle de réseaux de neurones artificiels.

  • Structural and Electronic Properties of Pulsed Laser Deposited Ru Nanocrystals on SiO 2

    by Nikita Zhidkov, Yury Lebedinskii, Ksenia Maksimova, Vladimir Tronin, Sergei Zarubin, Andrei Zenkevich, Anton Khanas

    Metallic nanoparticles are a powerful and versatile tool for various applications: catalysis and electrochemistry, chemical sensing, nonvolatile information storage, and plasmonics. Nanoparticles made of ruthenium (Ru) are particularly promising due to enhanced catalytic activity, high structural, and chemical stability. However, existing methods for Ru nanoparticle synthesis are not always favorable for applications, with major issues being proneness to aggregation at high temperature operation or functionality and performance degradation due to amorphous structure. In this work, a method to synthesize Ru nanocrystals on the SiO 2 surface using a pulsed laser deposition technique at 600 °C is presented. This study thoroughly characterizes the morphological, structural, and electronic properties of the nanocrystal arrays and shows that their size can be tuned with the number of laser pulses during the growth up to the limit of percolation threshold. The formation of Ru nanocrystals is favored by the emergence of interface dipole between Ru and SiO 2 during deposition. The high growth temperature ensures improved heating stability of the Ru nanocrystals, which can be implemented in various appropriate applications.

  • Implementation of an artificial spiking neuron with photoreceptor functionality using gas discharge tubes

    by Kirill Trunov, Viktor Kraiushkin, Andrei Zenkevich, Anton Khanas

    Implementations of artificial neural networks increased power consumption by computing facilities. This can be solved by developing energy efficient neuromorphic hardware, where use of memristors is a promising route. Besides memristive synapse implementations, artificial neurons need to be created. Here, focus has been on developing threshold switches, among which perfect physical realization is yet to be found. In this work, we use gas discharge tubes (GDTs) as prototype threshold switching devices. We construct a leaky integrate-and-fire (LIF) neuristor, based on one GDT, and further extend its functionality by creating a Hodgkin–Huxley-like neuron (HH), based on two GDTs, capable of reproducing 24 neuronal modes. We exploit the light sensitivity of a GDT, caused by the photoelectric effect, and demonstrate light-induced inhibition of spiking in the LIF neuron, while in the HH-like neuron, we show the light-induced spiking threshold tuning and autonomous (without electrical input) spiking, combining photoreceptor and sensory neuron functionality. We propose the scheme to miniaturize gas discharge devices and reduce the operation voltage down to technologically relevant values. Employed approach offers an alternative path for developing modern neuromorphic electronic hardware and presents an opportunity to engage more researchers in the field by using off-the-shelf devices for neuronal circuit research.


  • Multilevel magnetoresistance states in La0.7Sr0.3MnO3/BaTiO3/La0.7Sr0.3MnO3 heterostructure grown on MgO

    by Anton Khanas, Christian Hebert, David Hrabovsky, Loïc Becerra, Nathalie Jedrecy

    Magnetic tunnel junction (MTJ) is one of the cornerstones of modern information technologies. Bringing MTJ's operation beyond the conventional binary regime, enabled by tunneling magnetoresistance (TMR) effect, is highly promising for prospective memory technologies and neuromorphic hardware development. In this paper, we demonstrate multilevel magnetoresistance states in an all-perovskite-oxide La0.7Sr0.3MnO3 (LSMO)/BaTiO3/LSMO heterostructure grown on MgO substrates. Unlike traditional TMR, we observe four distinct regions of increased magnetoresistance, which result in three magnetic field-induced resistance states in total. We show that the observed phenomenon arises from the low-field magnetoresistance effect, which occurs in the two epitaxial LSMO layers, independently and at different values of the magnetic field. The effect is well simulated by a model based on the presence of structural defects and non-uniform deformations in the LSMO layers, induced by the large lattice mismatch of the LSMO with the MgO substrate. We believe that our findings contribute to the understanding of complex magnetoresistance effects in MTJs and can be taken into consideration for the design of multi-bit memory cells or neuromorphic devices.