ABAleksandrina Bankova

Aleksandrina Bankova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Aleksandrina Bankova has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Determination of Excavation Boundaries and Construction of the Profile of a Construction Site

    by Aleksandrina Bankova, Stefan Tenev, Asparuh Atanasov, Anastas Yangyozov

    This article presents an in-depth theoretical analysis and a systematized methodology for the digital design of general site plans in construction engineering, based on the precise processing of digital topographic data. The focus of the research is the development of a complex engineering structure comprising a horizontal construction platform and two specific ramps—straight and curved—whose implementation is grounded in the fundamental principles of descriptive geometry and vertical planning. Through the application of the method of projections with numerical marks in an automated environment, the study demonstrates how geometric relationships can be transformed into an applied algorithm for defining complex spatial interrelations between design elevations. On this basis, not only the geometric configuration and dimensions of the structure are determined, but also its gradients, excavation volumes, and the flow directions of floodwater and stormwater runoff. The scientific novelty of the study lies in the systematization of a hodology for transitioning from theoretical geometric principles to the digitalized design of vertical planning within the environment of AutoCAD. The main contribution consists of the implementation of an algorithmic approach for generating an unambiguously defined and reversible model that integrates, within a unified process, the calculation of design contours, earthwork volumes, and hydrological runoff parameters. The study further demonstrates the operational interoperability of the generated data with highly specialized software modules, thereby providing a precise foundation for subsequent engineering-geological and linear infrastructure design.

  • Open Access

    The Influence of a Blade Leading-Edge Configuration with a Variable Lean and Inverse Arrow Shape Modification in an Annular Turbine Cascade on the Pressure Loss Coefficient

    by Anastas Yangyozov, Aleksandrina Bankova, Stefan Tenev, Asparuh Atanasov

    This publication presents results of a numerical study of a controlled flow nozzle blade with a modification added at the leading edge of an annular cascade. The presented three-dimensional shape is compared with one having a constant lean at the leading edge, which is currently used in power plants. The study compares the annular row loss coefficient for a relatively large blade length and for a blade length reduced by half. Calculations are performed for compressible and incompressible flows. Additionally, the blade rows are investigated with different boundary conditions at the inlet and outlet, divided into several groups, in order to evaluate their effectiveness at different secondary-flow intensities. In numerical simulations, a variable velocity distribution, total temperature, and total pressure are set at the inlet, and a mass flow rate or variable static pressure is set at the outlet. For the developed variants, a loss coefficient is calculated, and a comparison is made between the two proposed bladed rows: the first with a straight-line trailing edge and a constant circumferential lean at the leading edge, and the second with a variable lean in the circumferential direction and a reverse sweep at the leading edge.

  • Open Access

    Influence of Deformation Measurement Time on the Rubber Element of a ‘SEGME’ Flexible Coupling

    by Stefan Tenev, Aleksandrina Bankova, Anastas Yangyozov, Asparuh Atanasov

    Particular attention is devoted to the characteristics of elastic couplings as essential connecting elements within machine drive systems. The operational characteristics of such couplings are determined under both static and dynamic loading conditions, while also taking into consideration the nature of the working environment and the specific type of driven machinery, such as crushing machines, mills, and related industrial equipment. The relationship between the transmitted torque load and the deformation of the coupling’s rubber working elements constitutes a significant factor contributing to the compensation of vibrations and shaft misalignments. Furthermore, the rubber elements are characterized by inherent damping properties and residual elastic deformation. The parameters governing damping behavior and deformation exhibit variations over time, which is of particular importance in deformation analysis and measurement. A series of experimental investigations was carried out to evaluate the influence of measurement time on the deformation state of the rubber element in a “SEGME”-type coupling. Four time intervals—5, 10, 20, and 30 s—are considered for recording the instantaneous deformation of the working element. Based on the obtained experimental data, mathematical relationships describing the energy dissipation and damping capacity of the rubber working elements are established as functions of the deformation measurement time. In addition, a coefficient characterizing the influence of deformation measurement duration was determined.

  • Open Access

    Aerodynamic Analysis of Small-Scale Turbines with Complex 3D Blade Shape

    by Anastas Yangyozov, Aleksandrina Bankova, Stefan Tenev, Asparuh Atanasov

    The paper presents a comprehensive aerodynamic analysis of toroidal blade turbines, proposing them as a novel approach to enhance efficiency in the conversion of airflow kinetic energy. The unique toroidal blade geometry allows for reduced vortex-induced losses and improved aerodynamic performance relative to conventional blade configuration. The study encompasses crucial performance parameters, including the airflow velocity at the outlet of the aerodynamic channel, rotational speed of the turbine model, electrical current and voltage output, the electrical power produced by the generator, and the power coefficient. Explored are strategies for optimizing structure design to minimize losses and maximize the power coefficient. The findings reveal that toroidal blade designs can significantly increase the effectiveness of low-power turbines, establishing them as a promising alternative for renewable energy applications in both urban and rural environments.

  • Open Access

    Study of the Influence of the Geometric Shape of Structural Elements on the Hydrodynamic Pattern in a Radial Precipitator

    by Aleksandrina Bankova, Anastas Yangyozov, Stefan Tenev, Asparuh Atanasov

    Wastewater treatment facilities of a diameter of approximately 15 m or more provide the opportunity to process large volumes of stormwater. The current report investigates the operation of a stormwater radial precipitator, without an impeller, working with particles of various sizes. A distinguishing feature is that the two-phase flow is solely gravity-driven, which leads to reduced energy requirements. This entails the necessity of a facility in which the linear and the local losses are minimized as much as possible. Linear losses can be reduced by decreasing the precipitator’s size. The initially proposed 15 m diameter proved to be ineffective since the sand only reached a certain zone and could not flow further to the outlet due to the insufficient energy. Therefore, it was necessary to reduce the size of the radial precipitator, which resulted in a shorter path for the sand particles and the water, which, in turn, reduced the linear resistance. As for the local losses, it turned out that many areas of the precipitator construction could be geometrically modified to significantly reduce the energy loss of the sand–water mixture. The boundary layer cannot be removed. However, it is possible the size and the number of vortex structures inside the settler to be reduced in order to create an optimal working environment.

  • Ultrasonic Density Measurement of Agricultural Crops

    by Asparuh Atanasov, Svilen Stoyanov, Aleksandrina Bankova, Stefan Tenev, Desislava Mihaylova

    The present work examines the possibility of measuring the amount of biomass by determining the density of the crop with an ultrasonic sensor. Due to the high speed of the sound waves, it is possible to carry out the measurement with a high speed of passage. The result is compared with a field measurement of the density of the stems of winter wheat. The linear regression analysis obtained $\mathbf{R}=0.999$ and $\mathbf{R } \text{Square }= 0.999$. This indicates 100% accuracy of the result.

  • Photogrammetry in Precision Agriculture for Determining Physical Parameters

    by Asparuh Atanasov, Svilen Stoyanov, Aleksandrina Bankova, Stefan Tenev, Desislava Mihaylova

    The possibility of measuring physical parameters of agricultural crops using a small unmanned aerial vehicle (UAV) is discussed in the material. A 3D model was created from which the dimensions taken were compared with those measured from the experimental field. The results were compared with linear regression analysis, and it was obtained for Multiple R 99.9% and R Square is 99.9%, which proves the applicability of the method.

  • Method for Obtaining NDVI from a Single Photo for Very Small Areas

    by Asparuh Atanasov, Svilen Stoyanov, Aleksandrina Bankova, Stefan Tenev, Desislava Mihaylova, Ivelin Ivanov

    Obtaining the NDVI (Normalized Difference Vegetation Index) reflectance vegetation index from a single photo is of key importance when studying very small areas and is important for the needs of the selection process. The possibility of using a created Python program code for its generation was considered. The obtained result was compared with a MAPIR program product, which is a specialized product for obtaining vegetation indices. A similar spatial map was obtained from both methods. Analysis of the results shows a correlation between the two methods, for Multiple R 83.5% and R Square are 69.5%, which proves the applicability of the method. The approach is suitable for studying small areas and type of plot of land.

  • Open Access

    Method for Measuring Soil Density by Assessing the Surface Tension in the Plough Stem

    by Asparuh Atanasov, Aleksandrina Bankova

    Introduced in the present study is a novel method for measuring soil density during standard tillage operations. The methodology involves the use of a strain gauge to measure the surface tensions of the plough body stem, reflecting the resistance force in the soil, through which the calculation of the density becomes feasible. The sensor is conveniently mounted above the contact area with the soil, allowing for easy replacement as required. Due to the small forces of surface deformation in the metal, a weight sensor with a capacity of 300 grams is used. The measurement process is continuous, and all plough bodies can be equipped with sensors. The results obtained demonstrate a high level of accuracy, with a Multiple R = 0.95 and R Square = 0.90 compared to tests conducted with a standard penetrometer, confirming the effectiveness and appropriateness of the proposed method.


  • Open Access

    Simulation of a Two-Phase Fluid Flow in a Design Solution of a Secondary Radial Settling Tank for Wastewater Treatment

    by Aleksandrina Bankova, Anastas Yangyozov, Stefan Tenev, Asparuh Atanasov

    This report examined a design solution for a wastewater treatment facility in which—based on input data such as the amount of suspension at the inlet—the solid content in the suspension and sludge, the relative weight of the particles, the sedimentation rate, the diameter and height of the radial settler were determined. After determining the parameters, the design solution was created in the SolidWorks 2024 environment. In the design process, the shape of the fastening device was modified, which is of significant importance in the design of the facility, as it affects in a specific way the concentration of suspended substances in the thickened sludge and in the recirculated sludge flow. The design was transferred into the ANSYS CFX 2017 software for subsequent simulation of its purification function. Based on techniques in fluid mechanics, the boundary and end conditions for the analysis of the fluid flow were set. The study focused on the analysis of a CFD model to describe the movement of a two-phase fluid consisting of rainwater and sand with a particle size of 1–10 mm. Based on the analysis, the results of the influence of rotating elements on the movement of the solid phase and water in the fluid domain were reported.