Sudipta Das
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sudipta Das has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Dragomir Milojevic
IMEC, Leuven, Belgium
4 shared publications - Dwaipayan Biswas
IMEC, Leuven, Belgium
4 shared publications Julien Ryckaert
IMEC, Leuven, Belgium
4 shared publications- James Myers
IMEC, Leuven, Belgium
3 shared publications - Bhawana Kumari
Department of Electronics and communication Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad, India
2 shared publications - Mohamed Naeim
IMEC, Leuven, Belgium
2 shared publications
Latest Publications
- 9 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Embedded Systems Letters
- Vol. PP (19430663) , 1
Enhancing Multi-Core SoC Performance through AuC Integration for Advanced 3D-IC Systems
This paper explores the application of Array-Under-CMOS (AuC) technology for the cache hierarchy in a commercial 4-core mobile System-on-Chip (SoC). This study evaluates the impact of AuC integration on Power, Performance & Area (PPA) metrics for L1, L2 caches at SoC level. We evaluated memory partitioning not only in comparison to the 2D baseline, but also in relation to the 3D Memory-on-Logic (MoL) integration. Our findings indicate that AuC technology can boost the SoC frequency of up to 71% and achieve 56% higher CPU efficiency compared to traditional 2D implementations. Furthermore, the study highlights the advantages of heterogeneous integration, where SRAM bit-cells are in the N3 FinFET (N3-FF) technology and the periphery in the A10 Nanosheet (A10-NS) technology, resulting in 12% power savings and 18% better CPU efficiency compared to baseline 2D. These results demonstrate the potential of AuC technology to optimize the design of SRAM, contributing to the overall efficiency of computing systems by addressing the memory bottleneck.
- 9 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Embedded Systems Letters
- Vol. PP (19430663) , 1
Enhancing Multi-Core SoC Performance through AuC Integration for Advanced 3D-IC Systems
This paper explores the application of Array-Under-CMOS (AuC) technology for the cache hierarchy in a commercial 4-core mobile System-on-Chip (SoC). This study evaluates the impact of AuC integration on Power, Performance & Area (PPA) metrics for L1, L2 caches at SoC level. We evaluated memory partitioning not only in comparison to the 2D baseline, but also in relation to the 3D Memory-on-Logic (MoL) integration. Our findings indicate that AuC technology can boost the SoC frequency of up to 71% and achieve 56% higher CPU efficiency compared to traditional 2D implementations. Furthermore, the study highlights the advantages of heterogeneous integration, where SRAM bit-cells are in the N3 FinFET (N3-FF) technology and the periphery in the A10 Nanosheet (A10-NS) technology, resulting in 12% power savings and 18% better CPU efficiency compared to baseline 2D. These results demonstrate the potential of AuC technology to optimize the design of SRAM, contributing to the overall efficiency of computing systems by addressing the memory bottleneck.
- 16 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 33 (2) , 346-357
Bandwidth-Latency-Thermal Co-Optimization of Interconnect-Dominated Many-Core 3D-IC
The ongoing integration of advanced functionalities in contemporary system-on-chips (SoCs) poses significant challenges related to memory bandwidth, capacity, and thermal stability. These challenges are further amplified with the advancement of artificial intelligence (AI), necessitating enhanced memory and interconnect bandwidth and latency. This article presents a comprehensive study encompassing architectural modifications of an interconnect-dominated many-core SoC targeting the significant increase of intermediate, on-chip cache memory bandwidth and access latency tuning. The proposed SoC has been implemented in 3-D using A10 nanosheet technology and early thermal analysis has been performed. Our workload simulations reveal, respectively, up to 12- and 2.5-fold acceleration in the 64-core and 16-core versions of the SoC. Such speed-up comes at 40% increase in die-area and a 60% rise in power dissipation when implemented in 2-D. In contrast, the 3-D counterpart not only minimizes the footprint but also yields 20% power savings, attributable to a 40% reduction in wirelength. The article further highlights the importance of pipeline restructuring to leverage the potential of 3-D technology for achieving lower latency and more efficient memory access. Finally, we discuss the thermal implications of various 3-D partitioning schemes in High Performance Computing (HPC) and mobile applications. Our analysis reveals that, unlike high-power density HPC cases, 3-D mobile case increases$T_{\max }$ only by$2~^{\circ } $ C–$3~^{\circ } $ C compared to 2-D, while the HPC scenario analysis requires multiconstrained efficient partitioning for 3-D implementations.- 16 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 33 (2) , 346-357
Bandwidth-Latency-Thermal Co-Optimization of Interconnect-Dominated Many-Core 3D-IC
The ongoing integration of advanced functionalities in contemporary system-on-chips (SoCs) poses significant challenges related to memory bandwidth, capacity, and thermal stability. These challenges are further amplified with the advancement of artificial intelligence (AI), necessitating enhanced memory and interconnect bandwidth and latency. This article presents a comprehensive study encompassing architectural modifications of an interconnect-dominated many-core SoC targeting the significant increase of intermediate, on-chip cache memory bandwidth and access latency tuning. The proposed SoC has been implemented in 3-D using A10 nanosheet technology and early thermal analysis has been performed. Our workload simulations reveal, respectively, up to 12- and 2.5-fold acceleration in the 64-core and 16-core versions of the SoC. Such speed-up comes at 40% increase in die-area and a 60% rise in power dissipation when implemented in 2-D. In contrast, the 3-D counterpart not only minimizes the footprint but also yields 20% power savings, attributable to a 40% reduction in wirelength. The article further highlights the importance of pipeline restructuring to leverage the potential of 3-D technology for achieving lower latency and more efficient memory access. Finally, we discuss the thermal implications of various 3-D partitioning schemes in High Performance Computing (HPC) and mobile applications. Our analysis reveals that, unlike high-power density HPC cases, 3-D mobile case increases$T_{\max }$ only by$2~^{\circ } $ C–$3~^{\circ } $ C compared to 2-D, while the HPC scenario analysis requires multiconstrained efficient partitioning for 3-D implementations.- Open Access
- 26 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Exploratory Solid-State Computational Devices and Circuits
- Vol. 10, 67-74
Toward Fine-Grained Partitioning of Low-Level SRAM Caches for Emerging 3D-IC Designs
Scaling on-chip memory capacity is one of the primary approaches to mitigate memory wall bottlenecks. Various 2.5/3D integration schemes, leveraging novel partitioning is being actively explored to improve system performance. However, fine-grained functional partitioning of memory macros is not widely reported. As SRAM scaling stagnates with emerging CMOS logic roadmap, we propose a partitioning of low-level (faster access) caches in 3D using an Array Under CMOS (AuC) technology paradigm. Our study focuses on partitioning and optimization of SRAM bit-cells and peripheral circuits, enabling heterogeneous integration, achieving up to 12% higher operating frequency with 50% leakage power reduction in the memory macros. Applied on a 64-bit mobile SoC CPU core, we achieve upto 60% higher energy efficiency compared to 2D baseline and 14% increase in operating frequency compared to standard memory-on-logic 3D partitioning scheme.
- 26 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Exploratory Solid-State Computational Devices and Circuits
- Vol. 10, 67-74
Open AccessToward Fine-Grained Partitioning of Low-Level SRAM Caches for Emerging 3D-IC Designs
Scaling on-chip memory capacity is one of the primary approaches to mitigate memory wall bottlenecks. Various 2.5/3D integration schemes, leveraging novel partitioning is being actively explored to improve system performance. However, fine-grained functional partitioning of memory macros is not widely reported. As SRAM scaling stagnates with emerging CMOS logic roadmap, we propose a partitioning of low-level (faster access) caches in 3D using an Array Under CMOS (AuC) technology paradigm. Our study focuses on partitioning and optimization of SRAM bit-cells and peripheral circuits, enabling heterogeneous integration, achieving up to 12% higher operating frequency with 50% leakage power reduction in the memory macros. Applied on a 64-bit mobile SoC CPU core, we achieve upto 60% higher energy efficiency compared to 2D baseline and 14% increase in operating frequency compared to standard memory-on-logic 3D partitioning scheme.
- 25 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 32 (11) , 2144-2148
Multidie 3-D Stacking of Memory Dominated Neuromorphic Architectures
Event-driven neuromorphic processors for artificial intelligence (AI) inference on edge/IoT devices require largeon-chip memory capacity, for efficient execution of spiking neural networks (NNs). In this work, we evaluate 3-D stacking benefits on SENECA, a digital neuromorphic accelerator core, sweeping itson-chip memory capacity from 2 up to 32 Mb in both legacy planar and advanced nanosheet CMOS logic nodes. In a planar CMOS node (GF-22 nm), two-die memory-on-logic (MoL) partitioning enables $8\times $ moreon-chip memory, and it boosts operating frequency by 7% with 26% less power than the 2-D. Moving to an advanced nanosheet technology (imec A10), multidie (up to 7 dies) MoL stacking enables a performance increase of up to 29% and power savings up to 31%. Furthermore, a core folding (CF) partitioning in A10 shows up to 16% performance improvement with 12% total power savings with respect to the 2-D implementation on the same technology. We also demonstrate no thermal overhead for multidie stacking at advanced nodes for designs exhibiting low power density. These physical design explorations lay the foundation for system technology co-optimization studies for edge devices.
- 25 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 32 (11) , 2144-2148
Multidie 3-D Stacking of Memory Dominated Neuromorphic Architectures
Event-driven neuromorphic processors for artificial intelligence (AI) inference on edge/IoT devices require largeon-chip memory capacity, for efficient execution of spiking neural networks (NNs). In this work, we evaluate 3-D stacking benefits on SENECA, a digital neuromorphic accelerator core, sweeping itson-chip memory capacity from 2 up to 32 Mb in both legacy planar and advanced nanosheet CMOS logic nodes. In a planar CMOS node (GF-22 nm), two-die memory-on-logic (MoL) partitioning enables $8\times $ moreon-chip memory, and it boosts operating frequency by 7% with 26% less power than the 2-D. Moving to an advanced nanosheet technology (imec A10), multidie (up to 7 dies) MoL stacking enables a performance increase of up to 29% and power savings up to 31%. Furthermore, a core folding (CF) partitioning in A10 shows up to 16% performance improvement with 12% total power savings with respect to the 2-D implementation on the same technology. We also demonstrate no thermal overhead for multidie stacking at advanced nodes for designs exhibiting low power density. These physical design explorations lay the foundation for system technology co-optimization studies for edge devices.