Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ziguang Wang has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A deterministic memory management architecture for real-time brake test bench based on virtual instrumentation framework

    by Yu Liu, Jiajun Song, Ziguang Wang, Chong Zhao, Wei Qi, Linlin Su, Xiaoming Han, Zhihua Sha

    The long-term stability of industrial measurement and control systems depends on effective software memory management. This paper presents a memory management method for LabVIEW-based measurement and control systems to address long-term stability issues caused by the implicit memory mechanisms of the dataflow paradigm. The method combines behavior feature classification with hierarchical resource control, and is demonstrated on a data-intensive train brake test bench. First, the formation of implicit data copying, reference-based garbage collection and memory fragmentation in the LabVIEW Runtime System is analyzed, and the key factors affecting long-term stability are identified. A two-dimensional classification model based on execution frequency and memory occupancy is then built to quantitatively describe the resource requirements of functional modules. Based on this model, a three-layer management framework comprising a communication layer, an innovation layer and a data layer is designed. The communication layer uses a queue mechanism with reference semantics to eliminate unnecessary data copies; the innovation layer implements deterministic classification management that combines dynamic and static strategies; and the data layer performs periodic buffer cleaning to suppress memory fragmentation. Experimental results show that the proposed method reduces memory usage from 460 to 119 MB (a 74% decrease) and stabilizes CPU utilization at 7 % ± 2 % , achieving stable long-term operation. The proposed method provides a universal memory management approach for LabVIEW-based measurement and control software and offers theoretical guidance for the reliability design of similar systems.

  • Measurement method for bogie steel spring parameters based on 3D structured light principle

    by Zhihua Sha, Xinpeng Shi, Yong Gong, Yan Qin, Jialiang Qi, Ziguang Wang

    Bogie Steel Springs require regular maintenance, with spring height and radius being critical inspection parameters. To address current issues such as poor measurement accuracy and low automation in bogie steel spring measurements, this paper proposes a bogie steel spring parameter measurement method based on the 3D structured light principle. First, the method captures 3D point cloud data of the steel spring using a binocular camera, then extracts the end-face and bottom-surface point clouds using the elevation method and projection-based dimensionality reduction method. Subsequently, an improved density-based clustering algorithm is employed to segment the end-face point cloud of the steel spring. The end-face point cloud then undergoes iterative plane fitting, and the spring height is determined by combining this with a projection-based height measurement algorithm. Finally, a boundary extraction method is introduced to process the end-face point cloud data, where the spring radius is obtained through a circle-fitting algorithm. Furthermore, a test platform was established to evaluate the reliability and stability of the measurement algorithm. Experimental results demonstrate that for eight sets of steel springs, the maximum measurement error remains within 0.2 mm. Multiple measurements performed on four spring specimens show a repeatability less than 0.1%, meeting maintenance specification requirements. These findings provide significant insights for the intelligent inspection of bogie components.


  • Open Access

    Research on the impact of grinding speed on surface/subsurface damage in monocrystalline silicon by workpiece rotational grinding

    by Xiaoqiu Zhang, Jiaheng Ma, Ziyuan Liu, Fujian Ma, Ziguang Wang, Shengfang Zhang

    To investigate the effect of grinding speed on the surface/subsurface damage of monocrystalline silicon grinding, experiments of grinding monocrystalline silicon wafers with different grinding speeds under the condition of equal abrasive cutting depth were designed based on the workpiece rotation method. The surface morphology, roughness, surface cracks, deformations, and residual stresses after machining were analyzed through comparative experiments, and the reasons for the effect of different machining speeds on the number of cracks and depth of subsurface damage were analyzed in combination with molecular dynamics simulation models. The results indicated that with the increase in grinding speed, the surface quality gradually becomes better. Furthermore, when the grinding speed is 2399 rpm, the surface roughness Ra value formed by Nos. 600 and 5000 grinding wheels is reduced by 22.5% and 31.2%, respectively, compared with 239 rpm. Besides, when grinding with the No. 600 grinding wheel, the higher the grinding speed, the fewer the number of subsurface cracks and the smaller the crack depth. Besides, when the grinding speed is 2399 rpm, the number of cracks is reduced by about 50%, and the depth of cracks is reduced by about 25% compared with 239 rpm. Moreover, when grinding with the No. 5000 grinding wheel, the deformation and residual stress of the silicon wafer gradually decrease with the increase in grinding speed. The deformation formed at a grinding speed of 2399 rpm is about 44% lower than that at 239 rpm. With the increase in grinding speed, the number of cracks, deformation, and residual stress of silicon wafer are reduced. Moreover, the increase in grinding speed will help reduce the damage degree of the crystal structure and the thickness of the damage layer of the silicon wafer, thus improving the quality of the grinding surface.


  • Open Access

    Research on service behaviour of brake pad fastener snap ring during high-speed train braking process

    by Jian Yin, Zihan Zhou, Li Shi, Ziguang Wang, Ziyuan Liu, Yu Liu, Zhihua Sha

    Disc brake performance is an important guarantee for the safe operation of high-speed trains. Brake pad fastener snap rings may fail during train braking, causing the friction body to fall off, which is a serious threat to the safety of train operation. This article establishes a finite element model of brake pads/discs taking into account the thermal-mechanical coupling field in the braking process. The temperature distribution of the brake disc surface, the displacement and stress results of the snap rings at different positions are investigated. The results show that the temperature of the brake disc rises and then falls during braking, and the surface temperature of the brake disc is spread in the form of an annular band. The highest displacement and stress variations are found in the snap ring group around the speed entrance area and the inner side of the brake pad. In the x and z directions, the average displacement changes are 0.1967 and 0.1233 mm, respectively. The average changes in contact stress and internal stress are 9.8 and 15.5 MPa. The results of the service behaviour of the snap ring provide a basis for the study of snap ring failure.


  • Design of Signal Generator Module for High and Low Voltage Composite Ejecting-explosion EDM Power Supply

    by Yu Liu, Hanzhong Zhang, Huadong Yang, Jiawei Qu, Ziguang Wang, Shengfang Zhang

    In order to improve the efficiency of the EDM power supply in processing difficult-to-process materials such as particle-reinforced metal matrix composites, the article proposed an ejecting-explosion EDM method, designed the signal generator module. The principle is to introduce a pulse current with a larger peak value in the traditional pulse power supply, and the two circuits cooperate with each other and process in order to increase the explosive force and discharge energy during discharge. Under the action of explosive force, they are removed together with the metal matrix in a solid form, thereby improving the processing efficiency. According to the high and low voltage composite structure, a controllable step processing waveform is proposed, and a signal generator module is designed.

  • Prediction and analysis of material removal mode of hollow thin-walled aluminum alloy components in cutting process based on matrix perturbation method

    by Yongcheng Mu, Shengfang Zhang, Fujian Ma, Ziguang Wang, Zhihua Sha

    During the cutting process of hollow thin-walled aluminum alloy components, the dynamic characteristics of the workpiece change due to the removal of materials. In order to solve the time-varying modal parameters quickly and accurately, a time-varying modal parameter prediction method based on perturbation principle is proposed. Firstly, the vibration of the initial state of the workpiece is analyzed by finite element method, and the frequency, stiffness matrix and mass matrix are extracted. Then the natural frequency of the workpiece after material removal is calculated by matrix perturbation method, and the results are compared with the results calculated by the finite element method. The results show that the prediction error of the first-order matrix perturbation method is controlled within 1% under small disturbance. Furthermore, it is proved that the dynamic prediction using matrix perturbation method is time-saving and reliable.