SLSining Li

Sining Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sining Li has a total of 46 co-authors. Here are the top co-authors by number of shared publications:

  • Yong Huang

    School of Chemistry and Pharmaceutical Sciences Key Laboratory for Chemistry and Molecular Engineering of Medicinal Resources (Ministry of Education of China) Guangxi Normal University Guilin P. R. China

    12 shared publications
  • Qiushuang Cui

    State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi 830017, China

    6 shared publications
  • Ruyun Bai

    State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi 830017, China

    5 shared publications
  • Wen Liu

    State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi 830017, China

    5 shared publications
  • Huan Li

    State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi 830017, China

    4 shared publications
  • Hanyu Wei

    State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi 830017, China

    3 shared publications

Latest Publications

  • Open Access

    Adsorption of methylene blue and tetracycline on nitrogen-doped cotton stalk-based biochar and mechanism research

    by Sining Li, Qiushuang Cui, Yong Huang, Ke Jin

    To address the pressing issue of tetracycline (TC) and methylene blue (MB) contamination in water, most prior research on cotton stalk-based biochar has concentrated on optimizing process parameters (e.g., carbonization temperature and activator ratio), with less systematic investigation into regulating the material's surface chemistry via heteroatom doping. In this study, nitrogen-doped biochars (NKBC-10, NKBC-5, and NKBC-1) with different melamine/KOH/cotton straw mass ratios (1:10:10, 1:5:5, and 1:1:1) were prepared by co-pyrolysis using cotton straw as the raw material and melamine as the nitrogen source, and the synergistic mechanism of N doping on the structural properties and adsorption performance of the materials was systematically elucidated. The results indicated that NKBC-5 possessed an excellent microporous-mesoporous structure (average pore size of 2.006 nm) and abundant surface nitrogen-containing functional groups, achieving maximum adsorption capacities of 1328.636 mg/g for TC and 917.170 mg/g for MB at 308.15 K. The adsorption process aligned with the quasi-secondary kinetics and Langmuir monolayer adsorption models. The mechanism involved a synergistic mix of Lewis acid-base interactions, π-π stacking, hydrogen bonding, and electrostatic interactions. The regeneration experiments revealed that the adsorption capacity of NKBC-5 for TC and MB remained 91.26% and 93.54% of the initial time after four cycles of recycling, indicating good stability. This study employs an N-doping strategy to synergistically optimize the pore structure and surface chemistry of cotton stalk-based biochar, offering a novel material design concept and technical foundation for the efficient and sustainable remediation of water contaminated with dyes and antibiotics.

  • Open Access

    Extraction of Aluminum and Lithium from Fly Ash via Alkali Roasting-Acid Leaching

    by Huan Li, Yong Huang, SiHan Zhang, Ruyun Bai, Hanyu Wei, Wen Liu, Qiushuang Cui, Sining Li

    Fly ash (FA) represents a promising secondary resource for the recovery of critical metals, particularly aluminum and lithium. This study proposes a combined process of NaOH roasting followed by hydrochloric acid leaching for efficiently extract aluminum and lithium from FA. The effects of key operational parameters on the leaching efficiencies of both metals were systematically investigated Under the optimized conditions (roasting at 700 °C with a FA/NaOH mass ratio of 1:1.1, followed by leaching at 90 °C with a liquid-to-solid ratio of 10:1), the leaching efficiencies reached 90.79% for aluminum and 80.72% for lithium. The underlying extraction mechanism was elucidated through thermodynamic calculations and comprehensive characterization of the roasting products and leached residues. The analysis revealed that the alkali roasting process effectively destroys the stable aluminosilicate matrix, facilitating the subsequent selective dissolution of aluminum and lithium. This work provides an effective strategy for recovering aluminum and lithium and a potential pathway for the sustainable and high-value utilization of FA.


  • Open Access

    Study on β-Cyclodextrin-Functionalized Molten Salt Nitrogen-Doped Biochar and Its Adsorption Performance and Mechanism

    by Sining Li, Yong Huang, Qiushuang Cui, Ke Jin, Hanyu Wei, Wen Liu, Huan Li, Ruyun Bai

    In this study, we prepare N–doped biochar loaded with β-CD, using cotton stalks as a carbon source, and evaluate its removal efficiency for tetracycline (TC) and methylene blue (MB) from aqueous solutions. This composite uniquely integrates molten salt activation, nitrogen doping, and β-CD grafting, resulting in an exceptionally high specific surface area of 1943 m2/g and abundant active sites. The findings reveal that β-CD-NKBC-1.5 (5 g of N–doped biochar loaded with 1.5 g of β-CD) demonstrates remarkable capabilities for both TC and MB removal across an extensive pH spectrum, reaching peak adsorption levels of 1269.8 and 969.4 mg/g at 308.15 K, respectively—outperforming most previously reported biochar-based adsorbents. The adsorption process is well described by the pseudo-second-order and Langmuir models, indicating that monolayer chemisorption is the dominant mechanism. β-CD-NKBC-1.5 exhibits preferential adsorption for TC and MB and maintains high adsorption efficiency even with coexisting ions (Na+, K+, Ca2+, Mg2+, and SO42−) at concentrations up to 500 mg/L. The adsorption mechanism involves Lewis acid–base interactions, hydrogen bonding, π–π stacking, and pore filling.

  • Free vibration and dynamic response of long sandwich cylindrical panels with nanocomposite foam core under uniformly distributed moving load

    by Guo Li, Yong Huang, Kai Ma, Yi Si, Guiqin Li, Sining Li

    1. Sandwich structure consists of a soft core with low density (light-weight) and thin face sheets with higher stiffness. The metal/polymer-based composite strengthened by CNTs (carbon nanotubes) o...

  • Open Access

    Electrochemical Degradation Mechanism of Desert Sand Concrete Under the Combined Action of Electric Field and Sulfate

    by Hong Wu, Yong Huang, Shisong Liu, Yubin Liu, Ting Liu, Baoxi Zuo, Sining Li

    To promote the sustainable utilization of desert sand as a regional resource in the infrastructure construction of saline-alkali areas, this paper proposes an accelerated test method based on the coupling of an external electric field (60 V) and a 2% Na2SO4 solution for rapid evaluation of its sulfate erosion resistance. The optimal mix proportion (FA 10%, water-to-binder ratio 0.33, cement-to-sand ratio 1:1.5, SF 10%) was determined through orthogonal experiments. By employing multi-scale analytical techniques including electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), X-ray diffraction (XRD) and thermal analysis (TG-DTG), the differentiated deterioration mechanisms driven by the electric field were systematically revealed. The results show that the charge-transfer resistance (Rct) decreased by about 95% within 28 d, demonstrating the characteristic of “micro-scale deterioration preceding macro-scale strength loss.” The anode region was dominated by dissolution of hydration products (porosity 5.1%), while the cathode region, due to enrichment of sulfate ions (S content 3.37 wt.%), generated a large amount of expansive products, leading to more pronounced structural damage (porosity 8.3%) and greater mass loss (cathode 12.56% > anode 9.85%). This study not only elucidates the deterioration mechanisms of desert sand concrete under coupled environmental action, but also provides a mechanism-explicit, rapid and efficient laboratory evaluation method for its sulfate resistance, offering practical guidance for durability design and prevention in engineering structures exposed to saline-alkali conditions.


  • Open Access

    Preparation of High-Purity Quartz by Roasting–Water Quenching and Ultrasound-Assisted Acid Leaching Process

    by Liran Jiao, Yong Huang, Yingshuang Zhang, Sining Li, Yubin Liu, Guirong Wei, Linlong Wei

    High-purity quartz is a key material for photovoltaics, semiconductors, and optical fibers. The raw material for high-purity quartz mainly comes from natural crystal and pegmatite. It is an attractive research field to excavate alternative feedstocks for traditional materials. Quartz conglomerate is a coarse-grained, clastic sedimentary rock that is cemented by a secondary silica or siliceous matrix. Economically, quartz conglomerate is gaining attention as a strategic alternative to depleting high-grade quartz veins and pegmatites. In this study, high-purity quartz was prepared by purifying quartz conglomerate from Jimunai, Altay, Xinjiang. The method combined high-temperature roasting, water quenching, and ultrasonic-assisted acid leaching. The effects of process parameters on purification efficiency were systematically investigated with the aid of XRD, SEM-EDS, and ICP-OES quantitative element detection. Many cracks formed on the quartz during roasting and quenching. These cracks exposed gap-filling impurities. Gas–liquid inclusions were removed, improving acid leaching. Under optimal ultrasonic-assisted acid leaching conditions (80 °C, 4 h, 10% oxalic acid + 12% hydrochloric acid, 180 W), the Fe content decreased to 6.95 mg/kg, with an 85.6% removal rate. The total impurity content decreased to 210.43 mg/kg. The SiO2 grade increased from 99.77% to 99.98%. Compared to traditional acid leaching, ultrasonic-assisted acid leaching improved Fe removal and reduced environmental pollution.


  • Open Access

    Investigation of Flexibility Enhancement Mechanisms and Microstructural Characteristics in Emulsified Asphalt and Latex-Modified Cement

    by Wen Liu, Yong Huang, Yulin He, Hanyu Wei, Ruyun Bai, Huan Li, Qiushuang Cui, Sining Li

    The inherent limitations of ordinary cement mortar—characterized by its high brittleness and low flexibility—result in a diminished load-bearing capacity, predisposing concrete pavements to cracking. A novel approach has been proposed to enhance material performance by incorporating emulsified asphalt and latex into ordinary cement mortar, aiming to improve the flexibility and durability of concrete pavements effectively. To further validate the feasibility of this proposed approach, a series of comprehensive experimental investigations were conducted, with corresponding conclusions detailed herein. As outlined below, the flexibility properties of the modified cement mortar were systematically evaluated at curing durations of 3, 7, and 28 days. The ratio of flexural to compressive strength can be increased by up to 38.9% at 8% emulsified asphalt content at the age of 28 days, and by up to 50% at 8% latex content. The mechanism of emulsified asphalt and latex-modified cement mortar was systematically investigated using a suite of analytical techniques: X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TG-DTG), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). Through comprehensive analyses of microscopic morphology, hydration products, and elemental distribution, the enhancement in cement mortar toughness can be attributed to two primary mechanisms. First, Ca2+ ions combine with the carbonyl groups of emulsified asphalt to form a flexible film structure during cement hydration, thereby reducing the formation of brittle hydrates. Second, active functional groups in latex form a three-dimensional network, regulating internal expansion-contraction tension in the modified mortar and extending its service life.


  • Open Access

    Analytical Study of the Detection Model for Sulphate Saline Soil Based on Mid-Infrared Spectrometry

    by Hanyu Wei, Yong Huang, Sining Li, Jingzhuo Zhao, Wen Liu, Huan Li, Qiushuang Cui, Ruyun Bai

    High soil sulfate levels can inhibit crop growth and accelerate concrete infrastructure degradation, highlighting the critical importance of rapid and accurate sulfate content determination. Nevertheless, conventional analytical techniques are laborious and intricate, and delays in processing may result in alterations to the material, owing to oxidation. We recognized the accuracy, reproducibility, and non-invasiveness of mid-infrared (MIR) spectroscopy as a rapid and straightforward technique for soil analysis. In this study, soil samples were collected from two depths (0–20 cm and 20–40 cm) across three regions in China: the arid northwestern region, the cold-temperate northeastern zone, and the subtropical southwestern region. One group was mixed with Na2SO4 (a readily soluble salt) at mass fractions ranging from 0.1% to 7%, while the other group was mixed with FeS2 (a sulfide) at mass fractions ranging from 1% to 70%. This study aimed to develop a mid-infrared spectroscopy-based method for analyzing soluble sulfate and sulfide in soil. Three chemometric methods were evaluated: partial least squares regression (PLSR), principal component regression (PCR), and multivariate linear regression (MLR). Results showed that the MLR model provided superior predictive performance. For the 20–40 cm sodium sulfate-mixed soil from the arid northwestern region, the MLR model exhibited the best performance with an Rp2 of 0.9535, an RMSEP of 0.0030, an RPD of 4.96, and an RPIQ of 6.26. For the 20–40 cm iron disulfide-mixed soil from the cold-temperate northeastern region, the MLR model demonstrated superior results with Rp2, RMSEP, RPD, and RPIQ values of 0.9590, 0.042, 5.97, and 10.94, respectively. For the 0–20 cm iron disulfide-mixed soil from the subtropical southwestern region, the MLR model achieved the best performance with an Rp2 of 0.9848, an RMSEP of 0.0025, an RPD of 14.20, and an RPIQ of 25.48. Despite regional variations in soil properties, this study successfully predicted sulfate and sulfide contents in soils from diverse areas using mid-infrared spectroscopy combined with appropriate chemometric methods. This approach provides reliable technical support for soil sulfate detection and offers significant practical value for soil assessment in both agricultural production and engineering construction.


  • Open Access

    Study on Extraction of Gallium from Fly Ash by Sodium Fluoride Calcination-Organic Acid Leaching

    by Ruyun Bai, Yong Huang, Sining Li, Changzhi Su, Huan Li, Qiushuang Cui, Wen Liu, Hanyu Wei, Yi Si

    Xinjiang is one of China’s most significant energy bases, and the generated fly ash (FA) contains a high concentration of metallic elements that can be used as a valuable resource. In this study, we looked into a roasting-acid leaching process technique for efficiently extracting gallium metal (Ga) from FA, employing sodium fluoride (NaF) as the roasting auxiliary and citric acid inzter (C6H8O7) acid leaching. After high-temperature activation by NaF, the glassy phase of FA was converted into silica aluminate with excellent acid solubility, and Ga was extracted from FA via acid leaching. The effects of optimal roasting and acid leaching process conditions on the Ga leaching rate were investigated. The results showed that it exhibited 83.71% Ga extraction under the conditions of a roasting temperature of 850 °C, FA-NaF coordination ratio of 1:0.5, roasting time of 10 min, C6H8O7 solution concentration of 1.75 mol/L, ratio (S/L) of 1:15, acid leaching temperature of 100 °C, and acid leaching time of 1 h. The results also indicated that it was possible to obtain a higher extraction efficiency for the Ga extracts under the conditions of roasting temperature of 850 °C and FA-NaF coordination ratio of 1:0.5.


  • Open Access

    Research on the Adsorption Mechanism and Performance of Cotton Stalk-Based Biochar

    by Qiushuang Cui, Yong Huang, Xufei Ma, Sining Li, Ruyun Bai, Huan Li, Wen Liu, Hanyu Wei

    In this research, we produced two types of biochar (BC) using cotton stalks as raw material and KOH as an activator, and compared their performance and adsorption mechanisms in the removal of tetracycline (TC) and methylene blue (MB) from wastewater. The results showed that the biochar generated using both procedures formed pores that connected to the interior of the biochar and had extensive microporous and mesoporous structures. The molten salt approach produces biochar with a higher specific surface area, larger pore size, and higher pore volume than the impregnation method, with a maximum specific surface area of 3095 m2/g. KBCM-900 (the BC produced using the molten salt method at 900 °C) had a better adsorption effect on TC, with a clearance rate of more than 95% in 180 min and a maximum adsorption amount of 912.212 mg/g. The adsorption rates of the two BCs for MB did not differ significantly at low concentrations, but as the concentration increased, KBCI-900 (the BC generated by the impregnation method at 900 °C) exhibited better adsorption, with a maximum adsorption of 723.726 mg/g. The pseudo-second-order kinetic model and the Langmuir isotherm model may accurately describe the TC and MB adsorption processes of KBCI-900 and KBCM-900. The KBCI/KBCM-900 adsorption process combines physical and chemical adsorption, with the primary mechanisms being pore filling, π–π interactions, hydrogen bonding, and electrostatic interactions. As a result, biochar generated using the molten salt method is suitable for the removal of large-molecule pollutants such as TC, whereas biochar prepared using the impregnation method is suitable for the removal of small-molecule dyes such as MB.