Junhong Yuan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Junhong Yuan has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Baoyu Huang
Tibet Zhengxin Engineering Testing Technology Co., Ltd., Lhasa 851414, China
1 shared publication - Bingxiang Yuan
School of Civil and Transportation Engineering, Guangdong University of Technology, Guangzhou 510006, China
1 shared publication Feng Wang
Inner Mongolia University
1 shared publication- Feng Wang
Transportation Institute, Inner Mongolia University, Hohhot 010070, China
1 shared publication - Hongzhong Li
School of Civil Engineering, Guangdong Communication Polytechnic, Guangzhou 510650, China
1 shared publication - Jianjun Gan
National and Provincial Joint Engineering Laboratory for the Hydraulic Engineering Safety and Efficient Utilization of Water Resources of Poyang Lake Basin, Nanchang Institute of Technology, Nan Chang, China
1 shared publication
Latest Publications
- Open Access
Investigation of the Impact of Geotextile Incorporation on the Mechanical Properties of Geopolymer
Geopolymers assume an irreplaceable position in the engineering field on account of their numerous merits, such as durability and high temperature resistance. Nevertheless, geopolymers also demonstrate brittleness. In this study, geotextiles with different layers were added to geopolymer to study its compressive strength and stability. Laboratory materials such as alkali activators, geotextiles and granite residual soil (GRS) were utilized. The samples were characterized via XRD, TG-DTG, SEM-EDS and FT-IR. The results indicate that the toughness of geopolymer is significantly enhanced by adding geotextiles, and the strength increase is most obvious when adding one layer of geotextile: the strength increased from 2.57 Mpa to 3.26 Mpa on the 14th day, an increase of 27%. Additionally, the D-W cycle has a great influence on geotextile polymers. On the 14th day, the average strength of the D-W cyclic sample (1.935 Mpa) was 1.305 Mpa smaller than that of the naturally cured sample (3.24 Mpa), and the strength decreased by 40%. These discoveries offer a novel approach for further promoting the application of geopolymers, especially in the field of foundation reinforcement.
Open AccessInvestigation of the Impact of Geotextile Incorporation on the Mechanical Properties of Geopolymer
Geopolymers assume an irreplaceable position in the engineering field on account of their numerous merits, such as durability and high temperature resistance. Nevertheless, geopolymers also demonstrate brittleness. In this study, geotextiles with different layers were added to geopolymer to study its compressive strength and stability. Laboratory materials such as alkali activators, geotextiles and granite residual soil (GRS) were utilized. The samples were characterized via XRD, TG-DTG, SEM-EDS and FT-IR. The results indicate that the toughness of geopolymer is significantly enhanced by adding geotextiles, and the strength increase is most obvious when adding one layer of geotextile: the strength increased from 2.57 Mpa to 3.26 Mpa on the 14th day, an increase of 27%. Additionally, the D-W cycle has a great influence on geotextile polymers. On the 14th day, the average strength of the D-W cyclic sample (1.935 Mpa) was 1.305 Mpa smaller than that of the naturally cured sample (3.24 Mpa), and the strength decreased by 40%. These discoveries offer a novel approach for further promoting the application of geopolymers, especially in the field of foundation reinforcement.
- Open Access
- 27 July 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (15) , 6440
Basalt Fibers versus Plant Fibers: The Effect of Fiber-Reinforced Red Clay on Shear Strength and Thermophysical Properties under Freeze–Thaw Conditions
Freeze–thaw cycling has a significant impact on the energy utilization and stability of roadbed fill. Given the good performance of basalt fiber (BF) and plant fiber (PF), a series of indoor tests are conducted on fiber-reinforced red clay (RC) specimens to analyze the shear strength, thermophysical, and microstructural changes and damage mechanisms of the RC under the freeze–thaw cycle–BF coupling, meanwhile, comparing the improvement effect of PF. The results indicate that the RC cohesion (c) first increases and then decreases with the increasing fiber content under BF improvement, reaching the maximum value at the content of 2%, and the change in the internal friction angle (φ) is relatively small. As the number of freeze–thaw cycles increases, cohesion (c) first decreases and then gradually stabilizes. The thermal conductivity increases with increasing moisture content, and the thermal effusivity increases and then decreases with increasing moisture content and fiber content. The heat storage capacity reaches the optimum level at a moisture content of 22.5% and a fiber content of 1%. Microanalysis reveals that at 2% fiber content, a fiber network structure is initially formed, and the gripping effect is optimal. The shear strength of PF-improved soil is higher than that of BF at a fiber content of 4–6%, and the thermal conductivity is better than that of BF. At the same fiber content, the heat storage and insulation capacity of BF-improved soil is significantly higher than that of PF.
- 27 July 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (15) , 6440
Open AccessBasalt Fibers versus Plant Fibers: The Effect of Fiber-Reinforced Red Clay on Shear Strength and Thermophysical Properties under Freeze–Thaw Conditions
Freeze–thaw cycling has a significant impact on the energy utilization and stability of roadbed fill. Given the good performance of basalt fiber (BF) and plant fiber (PF), a series of indoor tests are conducted on fiber-reinforced red clay (RC) specimens to analyze the shear strength, thermophysical, and microstructural changes and damage mechanisms of the RC under the freeze–thaw cycle–BF coupling, meanwhile, comparing the improvement effect of PF. The results indicate that the RC cohesion (c) first increases and then decreases with the increasing fiber content under BF improvement, reaching the maximum value at the content of 2%, and the change in the internal friction angle (φ) is relatively small. As the number of freeze–thaw cycles increases, cohesion (c) first decreases and then gradually stabilizes. The thermal conductivity increases with increasing moisture content, and the thermal effusivity increases and then decreases with increasing moisture content and fiber content. The heat storage capacity reaches the optimum level at a moisture content of 22.5% and a fiber content of 1%. Microanalysis reveals that at 2% fiber content, a fiber network structure is initially formed, and the gripping effect is optimal. The shear strength of PF-improved soil is higher than that of BF at a fiber content of 4–6%, and the thermal conductivity is better than that of BF. At the same fiber content, the heat storage and insulation capacity of BF-improved soil is significantly higher than that of PF.
- Open Access
- 7 August 2023
- Published by Wiley
Research Progress of Mechanical Properties of Fresh Concrete Under Low Temperature Dynamic Load in Mine Construction
In order to study the mechanical properties of fresh concrete under the coupling action of low temperature and dynamic load in mine construction, taking Tai Ge-miao mining area in Inner Mongolia as a reference, on the basis of collecting and sorting out relevant data at home and abroad, this paper introduces the characteristics and changes of mechanical properties of fresh concrete under the conditions of low temperature environment and freeze-thaw cycle in mine construction, and expounds the impact of freezing cycle on concrete properties in mine construction, The change characteristics of mechanical properties such as compressive strength and tensile strength under the coupled action of low temperature and dynamic load are summarized. After comprehensive analysis, the following conclusions are obtained: ⑴ The durability of fresh concrete will be seriously affected under impact load, and adding rubber and rubber fiber into concrete can improve the impact resistance and fatigue strength of concrete; ⑵ The durability of fresh concrete will be greatly reduced when it is subjected to alkali aggregate reaction, chloride ion reaction and carbonation;
- 7 August 2023
- Published by Wiley
Open AccessResearch Progress of Mechanical Properties of Fresh Concrete Under Low Temperature Dynamic Load in Mine Construction
In order to study the mechanical properties of fresh concrete under the coupling action of low temperature and dynamic load in mine construction, taking Tai Ge-miao mining area in Inner Mongolia as a reference, on the basis of collecting and sorting out relevant data at home and abroad, this paper introduces the characteristics and changes of mechanical properties of fresh concrete under the conditions of low temperature environment and freeze-thaw cycle in mine construction, and expounds the impact of freezing cycle on concrete properties in mine construction, The change characteristics of mechanical properties such as compressive strength and tensile strength under the coupled action of low temperature and dynamic load are summarized. After comprehensive analysis, the following conclusions are obtained: ⑴ The durability of fresh concrete will be seriously affected under impact load, and adding rubber and rubber fiber into concrete can improve the impact resistance and fatigue strength of concrete; ⑵ The durability of fresh concrete will be greatly reduced when it is subjected to alkali aggregate reaction, chloride ion reaction and carbonation;