Erin McCaughey
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Erin McCaughey has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- J. Houston Miller
George Washington University
5 shared publications - D. Michelle Bailey
National Institute of Standards and Technology, Gaithersburg, USA
2 shared publications - Monica M. Flores
George Washington University
2 shared publications - Alessandro Faccinetto
Univ. Lille, CNRS, UMR 8522 - PC2A - F-59000 Lille, France
1 shared publication Alexander Maranghides
1 shared publication- Alexander Maranghides
Department of Commerce Technology Administration Building and Fire Research Laboratory National Institute of Standards And Technology Gaithersburg, MD 20899
1 shared publication
Latest Publications
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Potassium Radiative Emissions for Wildfire Detection: Developing a Path Toward Laser Heterodyne Radiometry
While optical techniques for fire detection have evolved from simple visual observation to more advanced hyperspectral imaging systems, there remains a need for compact, selective and field-deployable tools capable of quantifying and characterizing both intensity and spectral signatures of flames. This work introduces a novel approach to Fire Optical Measurements (FOM) that leverages spectral emissions from potassium, a key tracer of flaming biomass combustion. We describe the development of a sensor platform operating in the near-infrared region to isolate potassium emission features (K-FOM) in both and simple “field-scale” demonstrations. By targeting radiative emission signatures specific to biomass burning, the system offers a promising method to differentiate wildfires from fossil fuel combustion, as well as to differentiate lower-temperature smoldering fires from intense crown fires.The K-FOM system builds on our prior experience in developing Laser Heterodyne Radiometry (LHR) sensors used for greenhouse gas measurements via in solar occultation, employing a similar optical design. In K-FOM, radiation from a potassium containing flame is collected (using a single-mode fiber or free-space collection optics). The collected radiation is mixed with light from a tunable diode laser operating near 770 nm. The resulting radio frequency signal from the combined beam carries both broadband contributions from flame particulate and the sharp emission lines from excited potassium atoms.This presentation focuses on testing this technique in a model, laboratory system. Conserved scalars are widely used in wildfire modeling to simplify complex thermochemistry by linking species concentrations or formation rates for species to a single, passively-advected quantity through a look-up library. Mixture fraction, which represents the local proportion of fuel mass (from the unburnt cold or gaseous fuel) relative to the total mixture mass, is a key conserved scalar used in wildfire models such as the NIST Fire Dynamics Simulator. To explore the validity of this approach to potassium fire chemistry, potassium chloride solutions are nebulized into a well-characterized laboratory flame system. By mapping ground state potassium mixture fraction, using Tunable Diode Laser Absorption Spectroscopy (TDLAS), the spatial profile of potassium emission, and data from prior structural measurements and computations in this system, we refine detailed mechanisms for potassium fire chemistry and test mechanism reduction strategies.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessPotassium Radiative Emissions for Wildfire Detection: Developing a Path Toward Laser Heterodyne Radiometry
While optical techniques for fire detection have evolved from simple visual observation to more advanced hyperspectral imaging systems, there remains a need for compact, selective and field-deployable tools capable of quantifying and characterizing both intensity and spectral signatures of flames. This work introduces a novel approach to Fire Optical Measurements (FOM) that leverages spectral emissions from potassium, a key tracer of flaming biomass combustion. We describe the development of a sensor platform operating in the near-infrared region to isolate potassium emission features (K-FOM) in both and simple “field-scale” demonstrations. By targeting radiative emission signatures specific to biomass burning, the system offers a promising method to differentiate wildfires from fossil fuel combustion, as well as to differentiate lower-temperature smoldering fires from intense crown fires.The K-FOM system builds on our prior experience in developing Laser Heterodyne Radiometry (LHR) sensors used for greenhouse gas measurements via in solar occultation, employing a similar optical design. In K-FOM, radiation from a potassium containing flame is collected (using a single-mode fiber or free-space collection optics). The collected radiation is mixed with light from a tunable diode laser operating near 770 nm. The resulting radio frequency signal from the combined beam carries both broadband contributions from flame particulate and the sharp emission lines from excited potassium atoms.This presentation focuses on testing this technique in a model, laboratory system. Conserved scalars are widely used in wildfire modeling to simplify complex thermochemistry by linking species concentrations or formation rates for species to a single, passively-advected quantity through a look-up library. Mixture fraction, which represents the local proportion of fuel mass (from the unburnt cold or gaseous fuel) relative to the total mixture mass, is a key conserved scalar used in wildfire models such as the NIST Fire Dynamics Simulator. To explore the validity of this approach to potassium fire chemistry, potassium chloride solutions are nebulized into a well-characterized laboratory flame system. By mapping ground state potassium mixture fraction, using Tunable Diode Laser Absorption Spectroscopy (TDLAS), the spatial profile of potassium emission, and data from prior structural measurements and computations in this system, we refine detailed mechanisms for potassium fire chemistry and test mechanism reduction strategies.
- 13 February 2026
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (6) , 1808-1817
Demonstration of near-infrared open-path absorption spectroscopy for water vapor and temperature monitoring during structure-to-structure fire spread experiments
With increasing threats from wildfires in wildland urban interface (WUI) areas, novel approaches for the characterization of fire dynamics and their interactions with built structures have accelerated. Here, we demonstrate an open-path, near-infrared laser absorption system for stand-off measurement of water vapor mole fraction and gas-phase temperature. The system was deployed along two optical paths during structure-to-structure fire spread experiments at the National Institute of Standards and Technology. Initial demonstration of the system was completed from March 2024 through May 2024 in the National Fire Research Laboratory, to assess whether open-path tunable diode laser absorption spectroscopy (TDLAS) can operate reliably under the challenging, smoke-laden, and rapidly evolving conditions of WUI-relevant fire exposures. Data were collected before ignition, during test burns, and throughout fire suppression. The system operates near 1393 nm with a typical signal-to-noise ratio exceeding 180. Results show increased temperature and water vapor mole fraction following fuel ignition, as well as variations related to fire-resistant eave vent activation times. These results highlight that open-path TDLAS is a viable nonperturbing measurement approach that can improve understanding of heat and gas flow for future large-scale fire studies, which can contribute to the enhancement of fire safety, building codes, and associated test methods.
- 13 February 2026
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (6) , 1808-1817
Demonstration of near-infrared open-path absorption spectroscopy for water vapor and temperature monitoring during structure-to-structure fire spread experiments
With increasing threats from wildfires in wildland urban interface (WUI) areas, novel approaches for the characterization of fire dynamics and their interactions with built structures have accelerated. Here, we demonstrate an open-path, near-infrared laser absorption system for stand-off measurement of water vapor mole fraction and gas-phase temperature. The system was deployed along two optical paths during structure-to-structure fire spread experiments at the National Institute of Standards and Technology. Initial demonstration of the system was completed from March 2024 through May 2024 in the National Fire Research Laboratory, to assess whether open-path tunable diode laser absorption spectroscopy (TDLAS) can operate reliably under the challenging, smoke-laden, and rapidly evolving conditions of WUI-relevant fire exposures. Data were collected before ignition, during test burns, and throughout fire suppression. The system operates near 1393 nm with a typical signal-to-noise ratio exceeding 180. Results show increased temperature and water vapor mole fraction following fuel ignition, as well as variations related to fire-resistant eave vent activation times. These results highlight that open-path TDLAS is a viable nonperturbing measurement approach that can improve understanding of heat and gas flow for future large-scale fire studies, which can contribute to the enhancement of fire safety, building codes, and associated test methods.
- Open Access
- 20 October 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (47) , 25300-25309
Ex situ characterization of the precursors of incipient nanoparticles in a laminar diffusion flame of ethylene
Detailed information on the chemical and physical properties of the precursors of incipient carbon nanoparticles (CNPs) in flame combustion provides clues on the reaction pathways for CNP formation and growth. Therefore, this data is needed by the modeling community who seeks to understand inception at a fundamental level. However, identifying and isolating the precursors in a reactive environment at high temperature remains a challenging task. The present work reports a multi-diagnostic approach to identify the molecular species involved in the inception of CNPs based on the comparative analysis of surface morphology (scanning electron microscopy), chemical composition (time of flight secondary ions mass spectrometry), chemical state (X-ray photoelectron spectroscopy), and structure (Raman spectroscopy) of samples extracted from a nitrogen-diluted ethylene laminar diffusion flame stabilized on a Yale burner. Statistical analysis enables the reduction of the pool of species to be considered by showing, for instance, that large polyaromatic molecules are not required for the CNP inception to occur. Several low m/z species are identified as likely candidates that are consistent with polycyclic aromatic hydrocarbons (PAHs) and their derivatives. Among them, this work stresses the importance of species slightly above the curve representing the maximally condensed aromatics and of non-benzenoid PAHs (containing 5-member aromatic rings for instance). This new experimental evidence reveals trends consistent with the “combined physical and chemical inception” group of hypotheses, according to which small clusters (typically dimers) of PAHs initially bound by physical forces are rapidly stabilized by the formation of C–C covalent bonds according to various postulated mechanisms (extended HACA, spin localization).
- 20 October 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (47) , 25300-25309
Open AccessEx situ characterization of the precursors of incipient nanoparticles in a laminar diffusion flame of ethylene
Detailed information on the chemical and physical properties of the precursors of incipient carbon nanoparticles (CNPs) in flame combustion provides clues on the reaction pathways for CNP formation and growth. Therefore, this data is needed by the modeling community who seeks to understand inception at a fundamental level. However, identifying and isolating the precursors in a reactive environment at high temperature remains a challenging task. The present work reports a multi-diagnostic approach to identify the molecular species involved in the inception of CNPs based on the comparative analysis of surface morphology (scanning electron microscopy), chemical composition (time of flight secondary ions mass spectrometry), chemical state (X-ray photoelectron spectroscopy), and structure (Raman spectroscopy) of samples extracted from a nitrogen-diluted ethylene laminar diffusion flame stabilized on a Yale burner. Statistical analysis enables the reduction of the pool of species to be considered by showing, for instance, that large polyaromatic molecules are not required for the CNP inception to occur. Several low m/z species are identified as likely candidates that are consistent with polycyclic aromatic hydrocarbons (PAHs) and their derivatives. Among them, this work stresses the importance of species slightly above the curve representing the maximally condensed aromatics and of non-benzenoid PAHs (containing 5-member aromatic rings for instance). This new experimental evidence reveals trends consistent with the “combined physical and chemical inception” group of hypotheses, according to which small clusters (typically dimers) of PAHs initially bound by physical forces are rapidly stabilized by the formation of C–C covalent bonds according to various postulated mechanisms (extended HACA, spin localization).
- Open Access
- 15 March 2025
- Published by Copernicus GmbH
Design of a Laser Heterodyne Radiometer (LHR) Sensor for Wildfire Detection and Characterization
Fire detection has traditionally been done optically using tools, ranging from human eyes to modern, advanced hyperspectral cameras. Both the intensity as well as the spectral signature of the light emitting from fires are important parameters to quantify and characterize. Our laboratory is developing and constructing two sensor platforms to demonstrate a novel technology in Fire Optical Measurements (FOM) for both laboratory and simple “field-scale” demonstrations. The first system, to be described in this presentation, operates in the near-infrared region and will focus on potassium light emissions (K-FOM). Radiative emissions from hot potassium are characteristic of intense fires involving biological materials, distinguishing them from fossil fuel combustion.The system design for K-FOM is framed by our prior experience in developing Laser Heterodyne Radiometry (LHR) sensors used in solar occultation measurements of greenhouse gases, employing a similar optical design. In K-FOM, light from a flame containing potassium is collected onto a single-mode optical fiber. The collected radiation is mixed with light from a tunable diode laser (Eblana Photonics), operating near 770 nm, using a 2x2 combiner. The two output fibers from the combiner arerouted to a a balanced detector (Thorlabs), and the resulting radio frequency (rf) power is measured using a Digikey power sensor.In this presentation, the design and characterization of the K-FOM sensor will be described, along with tests using laboratory flame burners. Simple field demonstrations are planned for calendar year 2025.
- 15 March 2025
- Published by Copernicus GmbH
Open AccessDesign of a Laser Heterodyne Radiometer (LHR) Sensor for Wildfire Detection and Characterization
Fire detection has traditionally been done optically using tools, ranging from human eyes to modern, advanced hyperspectral cameras. Both the intensity as well as the spectral signature of the light emitting from fires are important parameters to quantify and characterize. Our laboratory is developing and constructing two sensor platforms to demonstrate a novel technology in Fire Optical Measurements (FOM) for both laboratory and simple “field-scale” demonstrations. The first system, to be described in this presentation, operates in the near-infrared region and will focus on potassium light emissions (K-FOM). Radiative emissions from hot potassium are characteristic of intense fires involving biological materials, distinguishing them from fossil fuel combustion.The system design for K-FOM is framed by our prior experience in developing Laser Heterodyne Radiometry (LHR) sensors used in solar occultation measurements of greenhouse gases, employing a similar optical design. In K-FOM, light from a flame containing potassium is collected onto a single-mode optical fiber. The collected radiation is mixed with light from a tunable diode laser (Eblana Photonics), operating near 770 nm, using a 2x2 combiner. The two output fibers from the combiner arerouted to a a balanced detector (Thorlabs), and the resulting radio frequency (rf) power is measured using a Digikey power sensor.In this presentation, the design and characterization of the K-FOM sensor will be described, along with tests using laboratory flame burners. Simple field demonstrations are planned for calendar year 2025.
- 20 May 2024
- Published by National Institute of Standards and Technology (NIST)
NIST eave and vent experiments (EaVE) EaVEs phase A :
This test plan documents experiments that are part of ongoing research to assess structure-to-structure fire spread in the Wildland-Urban Interface (WUI). Previous indoor and outdoor full-scale experiments were conducted with varying distance between sheds and the exterior wall of a primary residence. The current experiments were planned to understand the failure of the eave vents used in previous experiments. The objective of these full-scale experiments is to characterize the performance of representative eave vents exposed to fire from the source structure. Metal sheds of varying sizes and fuel loads (wood cribs) will be burned under the 20 MW exhaust hood in the National Fire Research Laboratory (NFRL) at the National Institute of Standards and Technology (NIST) at varying structure separation distances (SSDs) from the target structure. The target structure includes an assembly of an exterior wall, a roof, and an eave vent. A range of measurements will be taken during the experiments including heat release rate, heat flux, temperature, gas flow velocity, and gas species concentration using open-path absorption spectroscopy. Video and infrared cameras will record the experiments. A separate NIST Technical Note will report the results of these experiments.
- 20 May 2024
- Published by National Institute of Standards and Technology (NIST)
NIST eave and vent experiments (EaVE) EaVEs phase A :
This test plan documents experiments that are part of ongoing research to assess structure-to-structure fire spread in the Wildland-Urban Interface (WUI). Previous indoor and outdoor full-scale experiments were conducted with varying distance between sheds and the exterior wall of a primary residence. The current experiments were planned to understand the failure of the eave vents used in previous experiments. The objective of these full-scale experiments is to characterize the performance of representative eave vents exposed to fire from the source structure. Metal sheds of varying sizes and fuel loads (wood cribs) will be burned under the 20 MW exhaust hood in the National Fire Research Laboratory (NFRL) at the National Institute of Standards and Technology (NIST) at varying structure separation distances (SSDs) from the target structure. The target structure includes an assembly of an exterior wall, a roof, and an eave vent. A range of measurements will be taken during the experiments including heat release rate, heat flux, temperature, gas flow velocity, and gas species concentration using open-path absorption spectroscopy. Video and infrared cameras will record the experiments. A separate NIST Technical Note will report the results of these experiments.