Yuxuan Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yuxuan Wang has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Xiao Gong
National University of Singapore
9 shared publications - Xuanqi Chen
National University of Singapore (NUS)
8 shared publications - Rui Shao
National University of Singapore (NUS)
5 shared publications - Kaizhen Han
Department of Electrical and Computer Engineering, National University of Singapore, Queenstown, Singapore
4 shared publications - Gan Liu
National University of Singapore (NUS)
3 shared publications - Geok Ing Ng
Energy Research Institute Nanyang Technological University 1 CleanTech Loop, #06‐04 Singapore 637141 Republic of Singapore
3 shared publications
Latest Publications
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (9) , 1842-1845
Gate-Side Hydrogen Regulation by an In Situ NiO Interlayer in ITO FETs Achieving Sub-5 mV ΔV TH @ 1 ks Under E OX of 5 MV/cm and 415 K
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (9) , 1842-1845
Gate-Side Hydrogen Regulation by an In Situ NiO Interlayer in ITO FETs Achieving Sub-5 mV ΔV TH @ 1 ks Under E OX of 5 MV/cm and 415 K
- 1 August 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (8) , 5099-5105
Fluorine Plasma-Treated ITO Transistors: Reliability and Temperature Dependence From 77 to 375 K
- 1 August 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (8) , 5099-5105
Fluorine Plasma-Treated ITO Transistors: Reliability and Temperature Dependence From 77 to 375 K
- 3 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. PP (07413106) , 1
Room Temperature Fluorination: A Cost-effective V TH Engineering Solution for BEOL Oxide Semiconductor FETs Enabling Inverters with Record Gain of 2687 and High Noise Margin
In this letter, we present a room temperature fluorination (RTF) treatment that offers a low-cost, back-end-of-line (BEOL)-compatible route to threshold voltage (VTH) engineering in oxide semiconductor (OS) FETs. Under the optimized condition, a 100 nm channel length ITO:F FET exhibits near-zero VTH, nearly hysteresis-free operation, and a subthreshold swing (SS) of 68 mV/dec. AFM measurements indicate no obvious plasma-induced roughening after RTF, while XPS confirms fluorine incorporation after the treatment. Selective application of RTF enables a BEOL-compatible inverter with a record-high DC voltage gain of 2687 V/V at VDD = 4 V. A unipolar inverter composed of 200 nm channel length (LCH) FETs further achieves a static noise margin (SNM) of 0.41 V at VDD = 1 V. These results highlight RTF as a practical path toward scalable, low-voltage oxide logic for monolithic 3D integration.
- 3 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. PP (07413106) , 1
Room Temperature Fluorination: A Cost-effective V TH Engineering Solution for BEOL Oxide Semiconductor FETs Enabling Inverters with Record Gain of 2687 and High Noise Margin
In this letter, we present a room temperature fluorination (RTF) treatment that offers a low-cost, back-end-of-line (BEOL)-compatible route to threshold voltage (VTH) engineering in oxide semiconductor (OS) FETs. Under the optimized condition, a 100 nm channel length ITO:F FET exhibits near-zero VTH, nearly hysteresis-free operation, and a subthreshold swing (SS) of 68 mV/dec. AFM measurements indicate no obvious plasma-induced roughening after RTF, while XPS confirms fluorine incorporation after the treatment. Selective application of RTF enables a BEOL-compatible inverter with a record-high DC voltage gain of 2687 V/V at VDD = 4 V. A unipolar inverter composed of 200 nm channel length (LCH) FETs further achieves a static noise margin (SNM) of 0.41 V at VDD = 1 V. These results highlight RTF as a practical path toward scalable, low-voltage oxide logic for monolithic 3D integration.
- 23 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (6) , 3757-3764
3-D Monolithic-Integrated BEOL-Compatible Oxide Semiconductor FETs on GaN HEMTs: CEO-GaN
This work proposes and experimentally demonstrates a monolithically integrated cascode enhancement-mode (E-mode) oxide semiconductor (OS) on GaN (CEO-GaN) technology that utilizes vertically 3-D stacking of a top-gate indium–tin oxide (TG-ITO) FETs on GaN high-electron-mobility transistors (HEMTs) and metal–insulator–semiconductor HEMTs (MISHEMTs) on Si substrate. Leveraging the back-end-of-line (BEOL) compatibility and monolithic integration capability of OSs, the CEO-GaN structure enables a cascode configuration without relying on external packaging. Experimental results validate that CEO-GaN delivers true e-mode operation, exhibiting a high drain current ( ${I}_{\text {D}}\text {)}$ of 1090 mA/mm, a high breakdown voltage (BV) of 603 V, and a stable performance up to 415 K. Additionally, the 3-D stacked structure enables a 29% reduction in device footprint compared to conventional lateral cascode designs, promoting better scalability and integration density. The proposed CEO-GaN structure offers a scalable path toward compact, normally-off GaN power devices with high performance and integration compatibility.
- 23 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (6) , 3757-3764
3-D Monolithic-Integrated BEOL-Compatible Oxide Semiconductor FETs on GaN HEMTs: CEO-GaN
This work proposes and experimentally demonstrates a monolithically integrated cascode enhancement-mode (E-mode) oxide semiconductor (OS) on GaN (CEO-GaN) technology that utilizes vertically 3-D stacking of a top-gate indium–tin oxide (TG-ITO) FETs on GaN high-electron-mobility transistors (HEMTs) and metal–insulator–semiconductor HEMTs (MISHEMTs) on Si substrate. Leveraging the back-end-of-line (BEOL) compatibility and monolithic integration capability of OSs, the CEO-GaN structure enables a cascode configuration without relying on external packaging. Experimental results validate that CEO-GaN delivers true e-mode operation, exhibiting a high drain current ( ${I}_{\text {D}}\text {)}$ of 1090 mA/mm, a high breakdown voltage (BV) of 603 V, and a stable performance up to 415 K. Additionally, the 3-D stacked structure enables a 29% reduction in device footprint compared to conventional lateral cascode designs, promoting better scalability and integration density. The proposed CEO-GaN structure offers a scalable path toward compact, normally-off GaN power devices with high performance and integration compatibility.
- 4 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (11) , 2066-2069
BEOL-Compatible Amorphous Oxide Semiconductor High-Voltage Transistors Achieving BFoM Beyond the GaAs Limit
Leveraging an offset top-gate (OTG) design and ALD-treated indium-tin oxide (ITO) channels, we present high-performance BEOL-compatible amorphous oxide semiconductor (AOS) high-voltage (HV) field-effect transistors (FETs). A long-channel (LC) FET features the highest Baliga’s figure of merit (BFoM) of 0.361 GW/cm2 among all AOS FETs, surpassing the one-dimensional GaAs limit. Additionally, a short-channel (SC) HV FET achieves a record-low specific on-state resistance (Ron, sp) of 9.15 × 10-2 mΩ·cm2. These results highlight the potential of AOS FETs for enabling high power density and efficiency in on-die power management and periphery applications for monolithic 3D integrated circuits (M3DICs).
- 4 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (11) , 2066-2069
BEOL-Compatible Amorphous Oxide Semiconductor High-Voltage Transistors Achieving BFoM Beyond the GaAs Limit
Leveraging an offset top-gate (OTG) design and ALD-treated indium-tin oxide (ITO) channels, we present high-performance BEOL-compatible amorphous oxide semiconductor (AOS) high-voltage (HV) field-effect transistors (FETs). A long-channel (LC) FET features the highest Baliga’s figure of merit (BFoM) of 0.361 GW/cm2 among all AOS FETs, surpassing the one-dimensional GaAs limit. Additionally, a short-channel (SC) HV FET achieves a record-low specific on-state resistance (Ron, sp) of 9.15 × 10-2 mΩ·cm2. These results highlight the potential of AOS FETs for enabling high power density and efficiency in on-die power management and periphery applications for monolithic 3D integrated circuits (M3DICs).
- 21 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (10) , 1749-1752
GaN-on-Si HEMT for D-Band Power Amplification Demonstrating 0.67 W/mm at 10 V
This Letter reports power amplification by a GaN-on-Si high electron mobility transistor (HEMT) in D-band. An AlN/GaN/AlGaN-on-Si metal-insulator-semiconductor (MIS)-HEMT with ${L}_{g}=140$ nm achieved ${I}_{\textit {dmax}}=2.0$ A/mm, ${g}_{\textit {mmax}}=0.65$ S/mm, and ${f}_{T}$ / ${f}_{\textit {max}}=112$ / 205 GHz. Load-pull at 123 GHz (continuous wave, CW) demonstrated a maximum output power ( ${P}_{\textit {out}}\text {)}$ of 0.67 W/mm at a quiescent drain bias ( ${V}_{\textit {ds}}\text {)}$ of 10 V. The peak power-added efficiency (PAE) of 5.3 % was achieved at ${P}_{\textit {out}}$ of 0.36 W/mm ( ${V}_{\textit {ds}}=5$ V). To the best of the authors’ knowledge, this demonstration marks the highest frequency (and the first-time reaching D-band) in power amplification among published GaN-on-Si HEMTs, therefore revealing the promising potential of GaN-on-Si electronics for sub-THz 6G communication.
- 21 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (10) , 1749-1752
GaN-on-Si HEMT for D-Band Power Amplification Demonstrating 0.67 W/mm at 10 V
This Letter reports power amplification by a GaN-on-Si high electron mobility transistor (HEMT) in D-band. An AlN/GaN/AlGaN-on-Si metal-insulator-semiconductor (MIS)-HEMT with ${L}_{g}=140$ nm achieved ${I}_{\textit {dmax}}=2.0$ A/mm, ${g}_{\textit {mmax}}=0.65$ S/mm, and ${f}_{T}$ / ${f}_{\textit {max}}=112$ / 205 GHz. Load-pull at 123 GHz (continuous wave, CW) demonstrated a maximum output power ( ${P}_{\textit {out}}\text {)}$ of 0.67 W/mm at a quiescent drain bias ( ${V}_{\textit {ds}}\text {)}$ of 10 V. The peak power-added efficiency (PAE) of 5.3 % was achieved at ${P}_{\textit {out}}$ of 0.36 W/mm ( ${V}_{\textit {ds}}=5$ V). To the best of the authors’ knowledge, this demonstration marks the highest frequency (and the first-time reaching D-band) in power amplification among published GaN-on-Si HEMTs, therefore revealing the promising potential of GaN-on-Si electronics for sub-THz 6G communication.
- 4 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (5) , 2725-2732
Efficient Responsivity Enhancement of Surface-Illuminated InGaAs Avalanche Photodiode by Photon Trapping on the SOI Substrate
The short-wave infrared avalanche photodiodes (SWIR-APDs) with high signal-to-noise ratio (SNR) and high bandwidth are essential components for optical interconnections and large-scale photonic integrated circuits (PICs). However, most surface-illuminated APDs rely on the use of a relatively thick absorber for high absorption efficiency, sacrificing the bandwidth and dark current. To address the challenge, we reported InGaAs APDs with a photon-trapping (PT) structure on the silicon-on-insulator (SOI) substrate using a ~250-nm absorber, featuring a record-high responsivity of 0.75 A/W at unit gain with a wavelength of 1626 nm, equivalent to an external quantum efficiency (EQE) of 57.2%, and a low dark current of 51.3 nA at 90% of the breakdown voltage. A broad operation window from -4 to -24.1 V is achieved, with high detectivities of 9.34 × 1010 Jones at -4 V and 3.43 × 1012 Jones at -24.1 V. The work exhibits the dramatic advantage of the PT structure in photon responsivity enhancement with 2.5 times and the feasibility of InGaAs-based APD to integrate with silicon PICs, paving the way for high-efficiency and high-speed detectors targeting a broad range of emerging applications.
- 4 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (5) , 2725-2732
Efficient Responsivity Enhancement of Surface-Illuminated InGaAs Avalanche Photodiode by Photon Trapping on the SOI Substrate
The short-wave infrared avalanche photodiodes (SWIR-APDs) with high signal-to-noise ratio (SNR) and high bandwidth are essential components for optical interconnections and large-scale photonic integrated circuits (PICs). However, most surface-illuminated APDs rely on the use of a relatively thick absorber for high absorption efficiency, sacrificing the bandwidth and dark current. To address the challenge, we reported InGaAs APDs with a photon-trapping (PT) structure on the silicon-on-insulator (SOI) substrate using a ~250-nm absorber, featuring a record-high responsivity of 0.75 A/W at unit gain with a wavelength of 1626 nm, equivalent to an external quantum efficiency (EQE) of 57.2%, and a low dark current of 51.3 nA at 90% of the breakdown voltage. A broad operation window from -4 to -24.1 V is achieved, with high detectivities of 9.34 × 1010 Jones at -4 V and 3.43 × 1012 Jones at -24.1 V. The work exhibits the dramatic advantage of the PT structure in photon responsivity enhancement with 2.5 times and the feasibility of InGaAs-based APD to integrate with silicon PICs, paving the way for high-efficiency and high-speed detectors targeting a broad range of emerging applications.
- 20 January 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (3)
BEOL-compatible Te-TeOx p-FETs with channel length down to 50 nm at cryogenic temperatures
In this work, we present p-type Te-TeOx FETs with BEOL-compatibility targeting high-performance computing at cryogenic temperatures. The devices feature aggressively scaled channel lengths (Lch of 50 nm) deposited using the sputtering method that is cost-effective, large-scale manufacturable, and highly controllable. We investigated the effects of oxygen content and film thickness in the sputtered channel layer on device performance. The device achieves a maximum transconductance (Gm, max) of 142 μS/μm, an on/off ratio exceeding 3 × 108, a subthreshold swing (SS) of 99 mV/Dec., a high hole mobility of 28.6 cm2/V s, and excellent NBTI and PBTI reliability characteristics at 77 K.
- 20 January 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (3)
BEOL-compatible Te-TeOx p-FETs with channel length down to 50 nm at cryogenic temperatures
In this work, we present p-type Te-TeOx FETs with BEOL-compatibility targeting high-performance computing at cryogenic temperatures. The devices feature aggressively scaled channel lengths (Lch of 50 nm) deposited using the sputtering method that is cost-effective, large-scale manufacturable, and highly controllable. We investigated the effects of oxygen content and film thickness in the sputtered channel layer on device performance. The device achieves a maximum transconductance (Gm, max) of 142 μS/μm, an on/off ratio exceeding 3 × 108, a subthreshold swing (SS) of 99 mV/Dec., a high hole mobility of 28.6 cm2/V s, and excellent NBTI and PBTI reliability characteristics at 77 K.
- 21 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (12) , 2315-2318
AlN/GaN/AlGaN-on-Si HEMT Achieving 1.3 W/mm at 5 V for 5G FR2 Handsets
This Letter reports a double heterostructure (DH) AlN/GaN/AlGaN-on-Si HEMT, which has been proposed, for low voltage (LV, ≤5 V) RF operation. The proposed transistor shows excellent DC ( Idmax =1.9 A/mm, gmmax =0.66 S/mm) and RF small-signal characteristics ( fT/fmax =145/195 GHz). Continuous-wave (CW) load-pull measurements at 30 GHz yield Psat of 0.6 (1.3) W/mm at Vds of 3.5 (5) V, and peak power-added efficiency (PAE) of 43% (42%). To the best of the authors’ knowledge, the Psat values are the highest reported for LV GaN-on-Si HEMTs in 5G FR2, despite the use of conventional alloyed contacts and a gate length ( Lg ) of 120 nm. Furthermore, among published LV GaN-on-Si HEMTs, the proposed transistor achieves a desired combination of saturation velocity ( vsat ) and knee voltage ( Vknee ), which are critical factors for LV power amplification. The results reflect the promising potential of the proposed heterostructure to achieve high transmit power in 5G FR2 handsets.
- 21 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (12) , 2315-2318
AlN/GaN/AlGaN-on-Si HEMT Achieving 1.3 W/mm at 5 V for 5G FR2 Handsets
This Letter reports a double heterostructure (DH) AlN/GaN/AlGaN-on-Si HEMT, which has been proposed, for low voltage (LV, ≤5 V) RF operation. The proposed transistor shows excellent DC ( Idmax =1.9 A/mm, gmmax =0.66 S/mm) and RF small-signal characteristics ( fT/fmax =145/195 GHz). Continuous-wave (CW) load-pull measurements at 30 GHz yield Psat of 0.6 (1.3) W/mm at Vds of 3.5 (5) V, and peak power-added efficiency (PAE) of 43% (42%). To the best of the authors’ knowledge, the Psat values are the highest reported for LV GaN-on-Si HEMTs in 5G FR2, despite the use of conventional alloyed contacts and a gate length ( Lg ) of 120 nm. Furthermore, among published LV GaN-on-Si HEMTs, the proposed transistor achieves a desired combination of saturation velocity ( vsat ) and knee voltage ( Vknee ), which are critical factors for LV power amplification. The results reflect the promising potential of the proposed heterostructure to achieve high transmit power in 5G FR2 handsets.
- 29 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (10) , 1847-1850
Top-Gate Indium-Tin-Oxide Power Transistors Featuring High Breakdown Voltage of 156 V
In this letter, a top-gate (TG) indium-tin-oxide (ITO) power field-effect transistor (FET) with offset design is reported for the first time and carefully investigated by both simulations and experimental measurements. The electrical field distribution within devices possessing different designs were comprehensively studied by TCAD Sentaurus based simulations, which guide the device fabrication for achieving high breakdown voltage ( V BD ). The device with 1 μm source-to-drain distance ( L SD ) not only achieves one of the best VBD values of 156 V among all kinds of oxide semiconductor (OS) FET ever reported, but also demonstrates a Baliga’s figure-of-merit (BFoM) beyond the silicon (Si) limit. An improved specific on-state resistance ( R on,sp ) of 0.023 mΩ·cm 2 together with a decent VBD of 14 V can be obtained by scaling down the LSD to 200 nm. Our findings highlight the great potential of ITO FET in future back-end-of-line (BEOL) compatible power applications.
- 29 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (10) , 1847-1850
Top-Gate Indium-Tin-Oxide Power Transistors Featuring High Breakdown Voltage of 156 V
In this letter, a top-gate (TG) indium-tin-oxide (ITO) power field-effect transistor (FET) with offset design is reported for the first time and carefully investigated by both simulations and experimental measurements. The electrical field distribution within devices possessing different designs were comprehensively studied by TCAD Sentaurus based simulations, which guide the device fabrication for achieving high breakdown voltage ( V BD ). The device with 1 μm source-to-drain distance ( L SD ) not only achieves one of the best VBD values of 156 V among all kinds of oxide semiconductor (OS) FET ever reported, but also demonstrates a Baliga’s figure-of-merit (BFoM) beyond the silicon (Si) limit. An improved specific on-state resistance ( R on,sp ) of 0.023 mΩ·cm 2 together with a decent VBD of 14 V can be obtained by scaling down the LSD to 200 nm. Our findings highlight the great potential of ITO FET in future back-end-of-line (BEOL) compatible power applications.