Hesam Dehghan Khalili
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hesam Dehghan Khalili has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Pezhman Moradi
Department of Civil and Environmental Engineering, Louisiana State University, Baton Rouge, LA
3 shared publications - Ali Poorkarimi
Department of Civil Engineering, Faculty of Engineering, Fasa University, Fasa 7461686131, Iran
1 shared publication - Alireza Pourbagheri
Department of Civil Engineering, Fasa University, Fasa, Iran
1 shared publication - Arian Adibinia
Department of Civil Engineering, Faculty of Engineering, Fasa University, Fasa 7461686131, Iran
1 shared publication - Behnam Ramezani
Department of Civil Engineering, Fasa University, Fasa, Iran
1 shared publication - Ehsan Babaei
Khak Sanat Omran Khazar Co, Amol, Iran
1 shared publication
Latest Publications
- 27 July 2026
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 11 (8) , 466
Advancements in hybrid jet mixing: a novel mechanical-hydraulic framework for optimizing column geometry and strength in cohesive soils
- 27 July 2026
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 11 (8) , 466
Advancements in hybrid jet mixing: a novel mechanical-hydraulic framework for optimizing column geometry and strength in cohesive soils
- Open Access
Biomaterial-Assisted Self-Healing for Crack Reduction in High-Performance Centrifugal Concrete Piles
Cracks in reinforced concrete structures compromise strength and durability, particularly in high-performance centrifugal concrete (HPC) piles, where degradation can become irreversible. Despite their high density and low permeability, HPC piles remain vulnerable to cracking, sulfate attack, and chloride penetration, necessitating innovative durability solutions. While self-healing concrete has been widely studied, its application in HPC piles remains unexplored, representing a critical research gap. This study investigates the synergistic use of Bacillus sphaericus bacteria and flax fibers to enhance crack healing, permeability reduction, and mechanical performance in HPC piles. In this research, HPC specimens were fabricated using a specialized centrifugal device and casting process. During the mixing phase, bacteria and flax fibers were incorporated into the concrete. The fresh mix was then spun to form the final specimens. To evaluate bacterial self-healing performance of specimens, controlled random cracks were induced using a compression testing machine. Thereafter, a series of compressive strength tests, 30 min water absorption tests (BS 1881), scanning electron microscopy (SEM) combined with energy dispersive X-ray spectroscopy (EDS), and EDS mapping (MAP) were conducted to evaluate self-healing efficiency. Results demonstrated that bacterial activation upon cracking led to calcium carbonate precipitation, effectively sealing cracks, reducing permeability, and enhancing compressive strength. Optimizing bacterial and fiber content further influenced water absorption and mechanical properties in both cubic and centrifugally cast specimens. This study bridges a critical gap by introducing biomaterial-based self-healing in HPC piles, offering a sustainable, cost-effective, and long-term strategy for enhancing the durability of deep foundation systems in aggressive environments.
Open AccessBiomaterial-Assisted Self-Healing for Crack Reduction in High-Performance Centrifugal Concrete Piles
Cracks in reinforced concrete structures compromise strength and durability, particularly in high-performance centrifugal concrete (HPC) piles, where degradation can become irreversible. Despite their high density and low permeability, HPC piles remain vulnerable to cracking, sulfate attack, and chloride penetration, necessitating innovative durability solutions. While self-healing concrete has been widely studied, its application in HPC piles remains unexplored, representing a critical research gap. This study investigates the synergistic use of Bacillus sphaericus bacteria and flax fibers to enhance crack healing, permeability reduction, and mechanical performance in HPC piles. In this research, HPC specimens were fabricated using a specialized centrifugal device and casting process. During the mixing phase, bacteria and flax fibers were incorporated into the concrete. The fresh mix was then spun to form the final specimens. To evaluate bacterial self-healing performance of specimens, controlled random cracks were induced using a compression testing machine. Thereafter, a series of compressive strength tests, 30 min water absorption tests (BS 1881), scanning electron microscopy (SEM) combined with energy dispersive X-ray spectroscopy (EDS), and EDS mapping (MAP) were conducted to evaluate self-healing efficiency. Results demonstrated that bacterial activation upon cracking led to calcium carbonate precipitation, effectively sealing cracks, reducing permeability, and enhancing compressive strength. Optimizing bacterial and fiber content further influenced water absorption and mechanical properties in both cubic and centrifugally cast specimens. This study bridges a critical gap by introducing biomaterial-based self-healing in HPC piles, offering a sustainable, cost-effective, and long-term strategy for enhancing the durability of deep foundation systems in aggressive environments.
- 3 January 2025
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 43 (2) , 1-19
Seismic Resilience with Deep Soil Mixing: Numerical and Experimental Insights into Liquefaction Mitigation
- 3 January 2025
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 43 (2) , 1-19
Seismic Resilience with Deep Soil Mixing: Numerical and Experimental Insights into Liquefaction Mitigation
- Open Access
- 1 June 2024
- Published by Apex Publishing in Numerical Methods in Civil Engineering
- Vol. 8 (4) , 89-99
Effect of stiffness of building adjacent to excavation on deformation of the excavation wall
In contemporary urban environments, the scarcity of space and the prevalence of apartment living necessitate extensive excavation to secure adequate space and appropriate infrastructure for most construction projects. The influence of the structural rigidity of adjacent buildings on controlling ground displacement induced by excavation is critically important yet underexplored. This study investigates the effect of the rigidity of neighboring buildings' structural elements on excavation by analyzing nearly all relevant components. The results show that the structural rigidity of adjacent buildings significantly impacts the horizontal deformations of the excavation wall and the positions of maximum horizontal deformation in both the excavation wall and the ground beneath the structures. As the building's rigidity increases, the maximum horizontal deformations of the wall occur at greater depths within the excavation. Additionally, increased rigidity causes the location of maximum horizontal deformations of the ground beneath the structure, near the excavation, to shift towards the center of the building. Furthermore, as the building length increases, the depth at which maximum horizontal deformation occurs also increases. However, the location of deformation beneath the adjacent building is independent of the building's width and does not change with variations in the building's length.
- 1 June 2024
- Published by Apex Publishing in Numerical Methods in Civil Engineering
- Vol. 8 (4) , 89-99
Open AccessEffect of stiffness of building adjacent to excavation on deformation of the excavation wall
In contemporary urban environments, the scarcity of space and the prevalence of apartment living necessitate extensive excavation to secure adequate space and appropriate infrastructure for most construction projects. The influence of the structural rigidity of adjacent buildings on controlling ground displacement induced by excavation is critically important yet underexplored. This study investigates the effect of the rigidity of neighboring buildings' structural elements on excavation by analyzing nearly all relevant components. The results show that the structural rigidity of adjacent buildings significantly impacts the horizontal deformations of the excavation wall and the positions of maximum horizontal deformation in both the excavation wall and the ground beneath the structures. As the building's rigidity increases, the maximum horizontal deformations of the wall occur at greater depths within the excavation. Additionally, increased rigidity causes the location of maximum horizontal deformations of the ground beneath the structure, near the excavation, to shift towards the center of the building. Furthermore, as the building length increases, the depth at which maximum horizontal deformation occurs also increases. However, the location of deformation beneath the adjacent building is independent of the building's width and does not change with variations in the building's length.
- 1 April 2023
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 23 (4) , 04023015
Deep Soil Mixing Columns as Settlement-Reducing Elements in Sandy Soils: A Numerical Study
The philosophy of designing piles as settlement-reducing elements causes the number of piles required beneath a wide foundation to be significantly reduced compared with conventional design methods. In this study, the behavior of deep soil mixing (DSM) columns used as settlement-reducing elements under the foundation of circular liquid reservoir tanks with large diameters (more than 50 m) in sandy soils of the Persian Gulf coast under axial loading has been investigated using a parametric-based finite element method (FEM) analysis in a Midas GTS NX environment. The parametric study includes 1 case with no improvement and 48 cases of improved soil with various configurations. The loading conditions are similar to those of a standard liquid tank with a large diameter. Variables such as area improvement ratios, DSM column floating ratios, and cushion layer thickness have been investigated. It has been found that increasing the thickness of the cushion layer, the floating ratio, and the area improvement ratio each contributes a certain amount to the overall reduction of the total and differential settlement values. However, under certain conditions, some factors, such as the area improvement ratio, have been found to have a reduced improvement effect. These factors, and their influence on the whole system, have been thoroughly investigated numerically in the parametric study, and in the two validation cases, the results of the FEM analysis have been compared with measured data from the field and small-scale tests. The results of gathered data from field tests and parametric studies have also been compared with empirical formulas provided by other researchers.
- 1 April 2023
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 23 (4) , 04023015
Deep Soil Mixing Columns as Settlement-Reducing Elements in Sandy Soils: A Numerical Study
The philosophy of designing piles as settlement-reducing elements causes the number of piles required beneath a wide foundation to be significantly reduced compared with conventional design methods. In this study, the behavior of deep soil mixing (DSM) columns used as settlement-reducing elements under the foundation of circular liquid reservoir tanks with large diameters (more than 50 m) in sandy soils of the Persian Gulf coast under axial loading has been investigated using a parametric-based finite element method (FEM) analysis in a Midas GTS NX environment. The parametric study includes 1 case with no improvement and 48 cases of improved soil with various configurations. The loading conditions are similar to those of a standard liquid tank with a large diameter. Variables such as area improvement ratios, DSM column floating ratios, and cushion layer thickness have been investigated. It has been found that increasing the thickness of the cushion layer, the floating ratio, and the area improvement ratio each contributes a certain amount to the overall reduction of the total and differential settlement values. However, under certain conditions, some factors, such as the area improvement ratio, have been found to have a reduced improvement effect. These factors, and their influence on the whole system, have been thoroughly investigated numerically in the parametric study, and in the two validation cases, the results of the FEM analysis have been compared with measured data from the field and small-scale tests. The results of gathered data from field tests and parametric studies have also been compared with empirical formulas provided by other researchers.