Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sirous Hosseinzadeh has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Global occurrences, exploration techniques, and geochemical controls on natural hydrogen systems

    by Sirous Hosseinzadeh, Saeed Salimzadeh, David A. Wood, Murat Karakus, Manouchehr Haghighi

  • Geoscience Visual Presentation G02: Utilising 4D geomechanical modelling to evaluate formation failure and fault reactivation during hydrogen storage and production

    by Sirous Hosseinzadeh

    Geoscience Visual Presentation G02 The influence of 4D geomechanics extends to various hydrocarbon field activities, encompassing exploration, development and hydrogen storage in depleted reservoirs. Its significance becomes more pronounced when dealing with challenging and depleted environments during injection. This paper outlines the utilisation of 4D geomechanics modelling in the hydrogen storage in depleted reservoirs. The application involves employing 4D geomechanics to comprehend subsurface dynamics and strategically plan wells in intricate environments. This method integrates the fourth dimension, time, into conventional 4D geomechanical models. It involves estimating the unconfined compressive strength, which is a key parameter in assessing the material’s resistance to axial stress without lateral support. In situ stresses were calculated using poroelastic equations. 4D coupled simulation has been created using finite element method. The primary aim is to assess the stability of the formation and seal integrity. This model has improved the analysis of bedding plane failures by simulating the current stress profile. Consequently, future storage and production scenarios can plan securely, minimising reservoir damage and avoiding significant fault reactivation issues. To access the Visual Presentation click the link below. To read the full paper click here

  • Utilising 4D geomechanical modelling to evaluate formation failure and fault reactivation during hydrogen storage and production

    by Sirous Hosseinzadeh, Manouchehr Haghighi, Alireza Salmachi, Saeed Salimzadeh, Murat Karakus

    The influence of 4D geomechanics extends to various hydrocarbon field activities, encompassing exploration, development and hydrogen storage in depleted reservoirs. Its significance becomes more pronounced when dealing with challenging and depleted environments during injection. This paper outlines the utilisation of 4D geomechanics modelling in the hydrogen storage in depleted reservoirs. The application involves employing 4D geomechanics to comprehend subsurface dynamics and strategically plan wells in intricate environments. This method integrates the fourth dimension, time, into conventional 4D geomechanical models. It involves estimating the unconfined compressive strength, which is a key parameter in assessing the material’s resistance to axial stress without lateral support. In situ stresses were calculated using poroelastic equations. 4D coupled simulation has been created using finite element method. The primary aim is to assess the stability of the formation and seal integrity. This model has improved the analysis of bedding plane failures by simulating the current stress profile. Consequently, future storage and production scenarios can plan securely, minimising reservoir damage and avoiding significant fault reactivation issues.


  • Open Access

    Three-Dimensional Coupled Temporal Geomechanical Model for Fault-Reactivation and Surface-Deformation Evaluation during Reservoir Depletion and CO2 Sequestration, Securing Long-Term Reservoir Sustainability

    by Sirous Hosseinzadeh, Reza Abdollahi, Saeed Salimzadeh, Manouchehr Haghighi

    Assessing reservoir subsidence due to depletion involves understanding the geological and geophysical processes that lead to ground subsidence as a result of reservoir fluid extraction. Subsidence is a gradual sinking or settling of the Earth’s surface, and it can occur when hydrocarbons are extracted from underground reservoirs. In this study, a time-integrated 3D coupled geomechanical modeling incorporating the fourth dimension—time—into traditional 3D geomechanical models has been constructed utilizing seismic inversion volumes and a one-dimensional mechanical Earth model (1D MEM). The 3D geomechanical model was calibrated to the 1D MEM results. Geomechanical rock properties were derived from the density and sonic log data that was distributed with conditioning to the seismic inversion volumes obtained from running pre-stack inversion. The standard elastic parameter equations were used to generate estimates of the elastic moduli. These properties are dynamic but have been converted to static values using additional equations used in the 1D MEM study. This included estimating the Unconfined Compressive Strength. In situ stresses were matched using different minimum horizontal principal stress gradients and horizontal principal stress ratios. The match is good except where the weak carbonate faults are close to the wells, where the Shmin magnitudes tend to decrease. The SHmax orientations were assessed from image log data and indicated to be 110° in the reservoir section. A time-integrated 3D coupled simulation was created using the finite-element method (FEM). The effective stresses increase while there is depletion in all directions, especially in the Z direction. The predicted compaction in the reservoir and overburden was 350 mm. Most of the compaction occurs at the reservoir level and dissipates towards the surface (seabed). Furthermore, the case displayed no shear failure that might cause or fault reactivation in the reservoir interval (Kangan–Dalan Formations) located in the simulated area. In this study, we applied an integrated and comprehensive geomechanical approach to evaluate subsidence, fault reactivation and stress alteration, while reservoir depletion was assessed using seismic inversion, well logs, and experiment data. The deformation monitoring of geological reservoirs, whether for gas storage or hazardous gas disposal, is essential due to the economic value of the stored assets and the hazardous nature of the disposed materials. This monitoring is vital for ensuring the sustainability of the reservoir by maintaining operational success and detecting integrity issues.


  • Open Access

    Imaging Pressure Distribution in Geological Reservoirs from Surface Deformation Data

    by Reza Abdollahi, Sirous Hosseinzadeh, Abbas Movassagh, Dane Kasperczyk, Manouchehr Haghighi

    Geological reservoirs are widely used for storing or disposing of various fluids and gases, including groundwater, wastewater, carbon dioxide, air, gas, and hydrogen. Monitoring these sites is essential due to the stored assets’ economic value and the disposed materials’ hazardous nature. Reservoir pressure monitoring is vital for ensuring operational success and detecting integrity issues, but it presents challenges due to the difficulty of obtaining comprehensive pressure distribution data. While direct pressure measurement methods are costly and localized, indirect techniques offer a viable alternative, such as inferring reservoir pressure from surface deformation data. This inversion approach integrates a forward model that links pressure distribution to deformation with an optimization algorithm to account for the ill-posed nature of the inversion. The application of forward models for predicting subsidence, uplift, and seismicity is well-established, but using deformation data for monitoring underground activity through inversion has yet to be explored. Previous studies have used various analytical, semi-analytical, and numerical models integrated with optimization tools to perform efficient inversions. However, analytical or semi-analytical solutions are impractical for complex reservoirs, and advanced numerical models are computationally expensive. These studies often rely on prior information, which may only sometimes be available, highlighting the need for innovative approaches. This study addresses these challenges by leveraging advanced numerical models and genetic algorithms to estimate pressure distribution from surface deformation data without needing prior information. The forward model is based on a discrete Green matrix constructed by integrating the finite element method with Python scripting. This matrix encapsulates the influence of reservoir properties and geometry on the displacement field, allowing for the rapid evaluation of displacement due to arbitrary pressure distributions. Precomputing Green’s matrix reduces computational load, making it feasible to apply advanced optimization methods like GA, which are effective for solving ill-posed problems with fewer observation points than unknown parameters. Testing on complex reservoir cases with synthetic data showed less than 5% error in predicted pressure distribution, demonstrating the approach’s reliability.


  • Open Access

    Carbon dioxide storage within coal reservoirs: A comprehensive review

    by Sirous Hosseinzadeh, Manouchehr Haghighi, Alireza Salmachi, Amin Shokrollahi