Nur Asyraf Md Akhir
Nur Asyraf Md Akhir has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Chee Wee Sia
Petroleum Engineering Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, Perak, Malaysia
2 shared publications - Ali Samer Muhsan
Universiti Teknologi PETRONAS
1 shared publication - Jayson Delos Reyes Santos
Universiti Teknologi PETRONAS
1 shared publication - Lexyber Casantosan Manalo
Palawan State University
1 shared publication - Manuel Jr. Ledesma Cabiguen
Palawan State University
1 shared publication - Mazlin Bt Idress
Department of Petroleum Engineering, Universiti Teknologi Petronas, Perak 32610, Malaysia
1 shared publication
Latest Publications
- 5 December 2025
- Published by Trans Tech Publications, Ltd. in Nano Hybrids and Composites
- Vol. 49, 47-64
Mechanism and Performance Analysis of Hybrid Nano Fluid for Enhanced Oil Recovery
The use of hybrid nanofluids aimed to improve the exceptional qualities of fluids, including adsorption, viscosity, stability, and interfacial tension. Although several surfactant changes utilizing hybrid nanomaterials have been documented, their wider application has been hindered by the material's stability and processing challenges. The purpose of this study is to use the liquid phase exfoliation technique and examine the properties of the recently created hybrid nanofluids. This paper investigates the mechanisms of how hybrid nanofluids (HNF) composed of Graphene nanoplatelet (GNP) & SiO 2 with various surfactants such as Gum Arabic (GA) and Sodium Carboxymethyl Cellulose (SCMC) could improve EOR through adsorption of nanoparticles, improve viscosity, Interfacial tension (IFT), and wettability contact angle. Based on the results, using the hybrid nanoparticles decreases the IFT between oil-water interface from 39.700 mN/m for brine to 38.466, 37.582, 35.609 mN/m, for Control HNF, GA HNF, and SCMC HNF respectively. The adsorption of nanoparticles mechanism occurs and peaks during a 12-hour to 24hour period. Furthermore, the findings on the performance of hybrid nanofluid have increased the viscosity from 0.317cP (brine) to 3.638cP (GA) and 3.556cP (SCMC) nanofluid. When nanoparticles are introduced into reservoirs, they interact with rocks and crude oil via rock absorption, potentially improving the recovery rate of oil by changing wettability and influencing the efficiency of water-transfer to oil in several improved oil recovery methods. The contact between the rock surface, nanofluid, and oil was shown to be reduced by 29.47% and 59.12%, as seen by the contact angle of the oil droplet on the rock surfaces. The phenomenon occurs because nanoparticles are attached to the interface of rock, oil, and brine.
- 5 December 2025
- Published by Trans Tech Publications, Ltd. in Nano Hybrids and Composites
- Vol. 49, 47-64
Mechanism and Performance Analysis of Hybrid Nano Fluid for Enhanced Oil Recovery
The use of hybrid nanofluids aimed to improve the exceptional qualities of fluids, including adsorption, viscosity, stability, and interfacial tension. Although several surfactant changes utilizing hybrid nanomaterials have been documented, their wider application has been hindered by the material's stability and processing challenges. The purpose of this study is to use the liquid phase exfoliation technique and examine the properties of the recently created hybrid nanofluids. This paper investigates the mechanisms of how hybrid nanofluids (HNF) composed of Graphene nanoplatelet (GNP) & SiO 2 with various surfactants such as Gum Arabic (GA) and Sodium Carboxymethyl Cellulose (SCMC) could improve EOR through adsorption of nanoparticles, improve viscosity, Interfacial tension (IFT), and wettability contact angle. Based on the results, using the hybrid nanoparticles decreases the IFT between oil-water interface from 39.700 mN/m for brine to 38.466, 37.582, 35.609 mN/m, for Control HNF, GA HNF, and SCMC HNF respectively. The adsorption of nanoparticles mechanism occurs and peaks during a 12-hour to 24hour period. Furthermore, the findings on the performance of hybrid nanofluid have increased the viscosity from 0.317cP (brine) to 3.638cP (GA) and 3.556cP (SCMC) nanofluid. When nanoparticles are introduced into reservoirs, they interact with rocks and crude oil via rock absorption, potentially improving the recovery rate of oil by changing wettability and influencing the efficiency of water-transfer to oil in several improved oil recovery methods. The contact between the rock surface, nanofluid, and oil was shown to be reduced by 29.47% and 59.12%, as seen by the contact angle of the oil droplet on the rock surfaces. The phenomenon occurs because nanoparticles are attached to the interface of rock, oil, and brine.
- 14 July 2024
- Published by Springer Nature
- p. 206-220
Enhancing Students’ Engagement and Motivation: Exploring the Impact of Active Learning Approaches in Educational Settings
- 14 July 2024
- Published by Springer Nature
- p. 206-220
Enhancing Students’ Engagement and Motivation: Exploring the Impact of Active Learning Approaches in Educational Settings
- 14 July 2024
- Published by Springer Nature
- p. 141-152
Transforming Petroleum Engineering Education: A Practical Industry-Oriented Capstone Project
- 14 July 2024
- Published by Springer Nature
- p. 141-152
Transforming Petroleum Engineering Education: A Practical Industry-Oriented Capstone Project