Jingxuan Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jingxuan Chen has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Guangzhi Chen
Beihang University
11 shared publications - Donglin Su
Beihang University
8 shared publications - Zhiyu Jia
School of Electronic and Information Engineering, Beihang University, Beijing, China
8 shared publications - Youlong Weng
Beihang University
6 shared publications - Junhao Zhang
School of Electronic and Information Engineering, Beihang University, Beijing, China
4 shared publications - Hongzhan Song
School of Electronic and Information Engineering, Beihang University, Beijing, China
3 shared publications
Latest Publications
- 24 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 68 (3) , 774-777
Kernel-Enhanced Deep Learning for Temperature-Dependent Electromagnetic Susceptibility Modeling of Analog Sensors
Analog sensors are widely deployed in electronic systems but are highly susceptible to electromagnetic interference (EMI). Moreover, their electromagnetic susceptibility (EMS) responses, manifested as EMI-induced offsets, vary significantly with temperature. Therefore, accurate modeling of temperature-dependent EMS responses, particularly in sparse temperature–frequency regions with abrupt variations, is critical to ensure stable operation across wide temperature ranges. This letter proposes a kernel-enhanced deep learning approach for modeling analog sensor EMS responses by using sparse measurement data. A deep neural network with temperature, interference frequency, and interference power as inputs is employed to predict output-voltage offsets. A kernel-based data augmentation strategy is employed to enrich critical temperature–frequency regions, and the optimal augmentation intervals are identified through Bayesian optimization. To validate the proposed approach, EMS experiments are conducted on two typical analog sensors by using bulk current injection and direct power injection tests. The results demonstrate that the proposed approach achieves higher prediction accuracy than three baseline methods, especially in temperature–frequency regions exhibiting rapid susceptibility variations.
- 24 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 68 (3) , 774-777
Kernel-Enhanced Deep Learning for Temperature-Dependent Electromagnetic Susceptibility Modeling of Analog Sensors
Analog sensors are widely deployed in electronic systems but are highly susceptible to electromagnetic interference (EMI). Moreover, their electromagnetic susceptibility (EMS) responses, manifested as EMI-induced offsets, vary significantly with temperature. Therefore, accurate modeling of temperature-dependent EMS responses, particularly in sparse temperature–frequency regions with abrupt variations, is critical to ensure stable operation across wide temperature ranges. This letter proposes a kernel-enhanced deep learning approach for modeling analog sensor EMS responses by using sparse measurement data. A deep neural network with temperature, interference frequency, and interference power as inputs is employed to predict output-voltage offsets. A kernel-based data augmentation strategy is employed to enrich critical temperature–frequency regions, and the optimal augmentation intervals are identified through Bayesian optimization. To validate the proposed approach, EMS experiments are conducted on two typical analog sensors by using bulk current injection and direct power injection tests. The results demonstrate that the proposed approach achieves higher prediction accuracy than three baseline methods, especially in temperature–frequency regions exhibiting rapid susceptibility variations.
- 21 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-14
The Measurement of Dual-Tone Electromagnetic Susceptibility for Integrated Circuits: Characteristics Analysis and Threshold Prediction
As electromagnetic interference (EMI) becomes increasingly complex, conventional continuous wave (CW)-based direct power injection (DPI) tests face challenges in accurately characterizing the electromagnetic susceptibility (EMS) of integrated circuits (ICs). This article focuses on EMS characterization and threshold prediction under dual-tone EMI, which is essential for ensuring reliable IC operation under complex EMI waveforms. An amplitude modulation (AM)-based test method is proposed to identify the EMS characteristics of various ICs. Dual-tone EMS thresholds are defined, and a corresponding prediction method is proposed for ICs with both average power EMS (A-EMS) and peak power EMS (P-EMS) characteristics. The proposed AM-based test method is validated on three types of digital ICs and three types of analog ICs. Results based on the six types of tested ICs indicate that the analog ICs exhibit A-EMS characteristics, while the digital ICs exhibit P-EMS characteristics across most frequency bands. The proposed prediction method is further evaluated through dual-tone sweeping, which achieves an average prediction error of 0.96 dB across the six tested ICs. The proposed methods provide reliable EMS characterization and accurate threshold prediction under dual-tone EMI conditions.
- 21 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-14
The Measurement of Dual-Tone Electromagnetic Susceptibility for Integrated Circuits: Characteristics Analysis and Threshold Prediction
As electromagnetic interference (EMI) becomes increasingly complex, conventional continuous wave (CW)-based direct power injection (DPI) tests face challenges in accurately characterizing the electromagnetic susceptibility (EMS) of integrated circuits (ICs). This article focuses on EMS characterization and threshold prediction under dual-tone EMI, which is essential for ensuring reliable IC operation under complex EMI waveforms. An amplitude modulation (AM)-based test method is proposed to identify the EMS characteristics of various ICs. Dual-tone EMS thresholds are defined, and a corresponding prediction method is proposed for ICs with both average power EMS (A-EMS) and peak power EMS (P-EMS) characteristics. The proposed AM-based test method is validated on three types of digital ICs and three types of analog ICs. Results based on the six types of tested ICs indicate that the analog ICs exhibit A-EMS characteristics, while the digital ICs exhibit P-EMS characteristics across most frequency bands. The proposed prediction method is further evaluated through dual-tone sweeping, which achieves an average prediction error of 0.96 dB across the six tested ICs. The proposed methods provide reliable EMS characterization and accurate threshold prediction under dual-tone EMI conditions.
- 13 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 68 (1) , 152-165
A Reinforcement Learning-Based Multiphysics Optimization of Composite Material Component With Slot-Structure in UAV System
In unmanned aerial vehicle (UAV) systems, the shielding effectiveness (SE) of composite material components with slot structures is analyzed and optimized under thermal and fluid constraints via reinforcement learning in this article. To improve the SE of UAV systems when satisfying the balance requirements of the electromagnetic-thermal-fluid (ETF) multiphysics coupling, the twin delayed deep deterministic policy gradient (TD3) algorithm for ETF with a carefully designed reward is proposed, which is termed ETF-TD3. To accelerate the multiphysics optimization process, an ETF predictive convolutional neural network (ETF-PCNN) is proposed to predict multiphysics results and integrated into the ETF-TD3 algorithm. Three typical composite material components in UAV systems, including UAV airframe and electric equipment boxes, are used to apply the proposed ETF-TD3 algorithm with the ETF-PCNN method. Optimization results and computational cost demonstrate the benefits and advantages of the ETF-TD3 algorithm in the multiphysics design of slotted composite material components. When compared with some commonly used optimization algorithms, the optimal design obtained by the ETF-TD3 algorithm achieves better SE while the thermal management and aerodynamic characteristics are satisfied. In addition, the proposed algorithm provides design guidelines while revealing the underlying physical principles.
- 13 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 68 (1) , 152-165
A Reinforcement Learning-Based Multiphysics Optimization of Composite Material Component With Slot-Structure in UAV System
In unmanned aerial vehicle (UAV) systems, the shielding effectiveness (SE) of composite material components with slot structures is analyzed and optimized under thermal and fluid constraints via reinforcement learning in this article. To improve the SE of UAV systems when satisfying the balance requirements of the electromagnetic-thermal-fluid (ETF) multiphysics coupling, the twin delayed deep deterministic policy gradient (TD3) algorithm for ETF with a carefully designed reward is proposed, which is termed ETF-TD3. To accelerate the multiphysics optimization process, an ETF predictive convolutional neural network (ETF-PCNN) is proposed to predict multiphysics results and integrated into the ETF-TD3 algorithm. Three typical composite material components in UAV systems, including UAV airframe and electric equipment boxes, are used to apply the proposed ETF-TD3 algorithm with the ETF-PCNN method. Optimization results and computational cost demonstrate the benefits and advantages of the ETF-TD3 algorithm in the multiphysics design of slotted composite material components. When compared with some commonly used optimization algorithms, the optimal design obtained by the ETF-TD3 algorithm achieves better SE while the thermal management and aerodynamic characteristics are satisfied. In addition, the proposed algorithm provides design guidelines while revealing the underlying physical principles.
- 7 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 12 (24) , 53353-53366
Accurate Jammer Localization in Wireless Sensor Networks Based on Signal Strength Map
Jamming attacks can severely disrupt the communications in wireless sensor networks (WSNs). Accurate jammer localization is crucial for the implementation of active anti-jamming strategies. Existing localization methods primarily target the proactive jammer equipped with an omnidirectional antenna within the WSN area, which limits their effectiveness in more complex scenarios. To bridge this capability gap, an accurate localization method based on signal strength map (ALSSM) is proposed to locate the jammer, regardless of whether it is proactive or reactive, and irrespective of its antenna type or location. The ALSSM method constructs a jamming signal strength (JSS) map using JSSs collected by sensor nodes via a deception strategy. This map is then utilized to formulate an evaluation metric to quantify localization estimation errors. Therefore, the localization task is transformed into an optimization problem. This method is convenient to implement, as it requires no additional dedicated hardware, and the collected JSS data can be integrated into the WSN’s normal data transmission process. Simulation and experimental results demonstrate that the ALSSM method can accurately locate the jammer, regardless of whether it is directional or omnidirectional, and irrespective of its deployment inside or outside the WSN area.
- 7 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 12 (24) , 53353-53366
Accurate Jammer Localization in Wireless Sensor Networks Based on Signal Strength Map
Jamming attacks can severely disrupt the communications in wireless sensor networks (WSNs). Accurate jammer localization is crucial for the implementation of active anti-jamming strategies. Existing localization methods primarily target the proactive jammer equipped with an omnidirectional antenna within the WSN area, which limits their effectiveness in more complex scenarios. To bridge this capability gap, an accurate localization method based on signal strength map (ALSSM) is proposed to locate the jammer, regardless of whether it is proactive or reactive, and irrespective of its antenna type or location. The ALSSM method constructs a jamming signal strength (JSS) map using JSSs collected by sensor nodes via a deception strategy. This map is then utilized to formulate an evaluation metric to quantify localization estimation errors. Therefore, the localization task is transformed into an optimization problem. This method is convenient to implement, as it requires no additional dedicated hardware, and the collected JSS data can be integrated into the WSN’s normal data transmission process. Simulation and experimental results demonstrate that the ALSSM method can accurately locate the jammer, regardless of whether it is directional or omnidirectional, and irrespective of its deployment inside or outside the WSN area.
- 22 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (11) , 20067-20081
A Two-Step ML-Based Approach for Multiple RF Sources Sensing: Localization and Power Estimation
The localization and power estimation of radio frequency interference sources is increasingly becoming an important topic in radio frequency sensing. This article proposes a novel two-step approach based on machine learning, which employs a non-convex sparse recovery algorithm and a fusion neural network specifically designed for the localization and power estimation of multiple RF sources. In the first step, the improved non-convex sparse recovery algorithm for the direction of arrival (DOA) and received signal strength (RSS) joint estimation is proposed based on an iterative maximally sparse convex algorithm, which offers enhanced DOA and RSS estimation accuracy. In the second step, a DOA and RSS fusion artificial neural network is constructed to accurately determine the location and power of the sources by inputting the DOA and RSS estimated in the first step. Simulation results show that both the first step and the second step perform better when used alone or in combination. The performance of the proposed two-step approach is verified through a sensing experiment involving two sources and four sensor arrays with an unmanned vehicle-based testing system.
- 22 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (11) , 20067-20081
A Two-Step ML-Based Approach for Multiple RF Sources Sensing: Localization and Power Estimation
The localization and power estimation of radio frequency interference sources is increasingly becoming an important topic in radio frequency sensing. This article proposes a novel two-step approach based on machine learning, which employs a non-convex sparse recovery algorithm and a fusion neural network specifically designed for the localization and power estimation of multiple RF sources. In the first step, the improved non-convex sparse recovery algorithm for the direction of arrival (DOA) and received signal strength (RSS) joint estimation is proposed based on an iterative maximally sparse convex algorithm, which offers enhanced DOA and RSS estimation accuracy. In the second step, a DOA and RSS fusion artificial neural network is constructed to accurately determine the location and power of the sources by inputting the DOA and RSS estimated in the first step. Simulation results show that both the first step and the second step perform better when used alone or in combination. The performance of the proposed two-step approach is verified through a sensing experiment involving two sources and four sensor arrays with an unmanned vehicle-based testing system.
- 7 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (6) , 8953-8965
FRFT-Based Interference Suppression for Automotive FMCW Radars
Automotive radars are widely deployed in advanced driver assistance systems (ADASs) and autonomous driving. However, the increased vehicles equipped with radars make mutual interferences in automotive radars become an nonnegligible issue. The incoherent interferences between automotive frequency modulated continuous wave (FMCW) radars can significantly increase the noise level, leading to the degeneration of target detection. To address the problem, this article proposes an interference suppression approach based on the Fractional Fourier Transform (FRFT). It is noted that the interference component in the intermediate frequency (IF) signal exhibits chirp-like characteristics, which shows the energy concentration in a FRFT domain. Therefore, the interference component can be easily filtered out in the FRFT domain. Additionally, to decrease the computational cost in the presence of multiple interferences, a two-dimensional (2-D) constant false alarm rate (CFAR) detector is utilized to detect interference components. The proposed approach is also effective in scenarios with a large proportion of interference samples. Both simulations and field experiments demonstrate the performance of the proposed approach
- 7 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (6) , 8953-8965
FRFT-Based Interference Suppression for Automotive FMCW Radars
Automotive radars are widely deployed in advanced driver assistance systems (ADASs) and autonomous driving. However, the increased vehicles equipped with radars make mutual interferences in automotive radars become an nonnegligible issue. The incoherent interferences between automotive frequency modulated continuous wave (FMCW) radars can significantly increase the noise level, leading to the degeneration of target detection. To address the problem, this article proposes an interference suppression approach based on the Fractional Fourier Transform (FRFT). It is noted that the interference component in the intermediate frequency (IF) signal exhibits chirp-like characteristics, which shows the energy concentration in a FRFT domain. Therefore, the interference component can be easily filtered out in the FRFT domain. Additionally, to decrease the computational cost in the presence of multiple interferences, a two-dimensional (2-D) constant false alarm rate (CFAR) detector is utilized to detect interference components. The proposed approach is also effective in scenarios with a large proportion of interference samples. Both simulations and field experiments demonstrate the performance of the proposed approach
- 13 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-13
A Self-Check Method for Enhancing the Measurement Accuracy of Analog Sensors Under Electromagnetic Interference
Inaccurate measurements of analog sensors caused by electromagnetic interference (EMI) signals threaten the security and reliability of sensor-based systems. This article proposes a self-check method for recognizing and correcting disturbed measurements of analog sensors under EMI signals. The core basis of this method involves the use of a dummy sensing element to make the sensor sensitive only to EMI signals, rather than the measurand. This configuration enables the sensor to switch between normal mode and self-check mode through switching devices. Then the sensor response to EMI signals in normal mode is characterized by that in self-check mode, which is computable. A detailed implementation framework is derived to ensure that the sensor responses to EMI signals in both modes are highly similar, involving the properties of the dummy sensing element, the input voltage of the operational amplifier (opamp), and the power supply rails. Owing to its low demand for additional components and computing resources, the proposed self-check method is cost-effective and convenient to implement. Its effectiveness and robustness are validated on a temperature sensor, an ambient light sensor, a linear variable differential transformer (LVDT) and a wireless temperature sensor node with EMI experiments using different signals parameters, temperatures and light intensities. The experimental results show that this method can enhance the measurement accuracy of analog sensors to help maintain the functioning of sensor-based systems under EMI signals.
- 13 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-13
A Self-Check Method for Enhancing the Measurement Accuracy of Analog Sensors Under Electromagnetic Interference
Inaccurate measurements of analog sensors caused by electromagnetic interference (EMI) signals threaten the security and reliability of sensor-based systems. This article proposes a self-check method for recognizing and correcting disturbed measurements of analog sensors under EMI signals. The core basis of this method involves the use of a dummy sensing element to make the sensor sensitive only to EMI signals, rather than the measurand. This configuration enables the sensor to switch between normal mode and self-check mode through switching devices. Then the sensor response to EMI signals in normal mode is characterized by that in self-check mode, which is computable. A detailed implementation framework is derived to ensure that the sensor responses to EMI signals in both modes are highly similar, involving the properties of the dummy sensing element, the input voltage of the operational amplifier (opamp), and the power supply rails. Owing to its low demand for additional components and computing resources, the proposed self-check method is cost-effective and convenient to implement. Its effectiveness and robustness are validated on a temperature sensor, an ambient light sensor, a linear variable differential transformer (LVDT) and a wireless temperature sensor node with EMI experiments using different signals parameters, temperatures and light intensities. The experimental results show that this method can enhance the measurement accuracy of analog sensors to help maintain the functioning of sensor-based systems under EMI signals.
- 29 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-13
RIMformer: An End-to-End Transformer for FMCW Radar Interference Mitigation
Frequency-modulated continuous-wave (FMCW) radar plays a pivotal role in the field of remote sensing. In low-altitude environments, where UAV-borne FMCW radars are increasingly used, mutual interference poses significant challenges to radar performance. In this paper, a novel FMCW radar interference mitigation (RIM) method, termed as RIMformer, is proposed by using an end-to-end Transformer-based structure. In the RIMformer, a dual multi-head self-attention mechanism is proposed to capture the correlations among the distinct distance elements of intermediate frequency (IF) signals. Additionally, an improved convolutional block is integrated to harness the power of convolution for extracting local features. The architecture is designed to process time-domain IF signals in an end-to-end manner, thereby avoiding the need for additional manual data processing steps. The improved decoder structure ensures the parallelization of the network to increase its computational efficiency. Simulation and measurement experiments are carried out to validate the accuracy and effectiveness of the proposed method. Extensive simulations and empirical measurements demonstrate that RIMformer significantly improves interference mitigation and signal recovery, which advances the reliability and effectiveness of UAV-borne FMCW radars in complex environments.
- 29 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-13
RIMformer: An End-to-End Transformer for FMCW Radar Interference Mitigation
Frequency-modulated continuous-wave (FMCW) radar plays a pivotal role in the field of remote sensing. In low-altitude environments, where UAV-borne FMCW radars are increasingly used, mutual interference poses significant challenges to radar performance. In this paper, a novel FMCW radar interference mitigation (RIM) method, termed as RIMformer, is proposed by using an end-to-end Transformer-based structure. In the RIMformer, a dual multi-head self-attention mechanism is proposed to capture the correlations among the distinct distance elements of intermediate frequency (IF) signals. Additionally, an improved convolutional block is integrated to harness the power of convolution for extracting local features. The architecture is designed to process time-domain IF signals in an end-to-end manner, thereby avoiding the need for additional manual data processing steps. The improved decoder structure ensures the parallelization of the network to increase its computational efficiency. Simulation and measurement experiments are carried out to validate the accuracy and effectiveness of the proposed method. Extensive simulations and empirical measurements demonstrate that RIMformer significantly improves interference mitigation and signal recovery, which advances the reliability and effectiveness of UAV-borne FMCW radars in complex environments.