Jacob Rajangam
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jacob Rajangam has a total of 81 co-authors. Here are the top co-authors by number of shared publications:
- Sethurathinam Saraswathy
Department of Fruit Science, Horticultural College and Research Institute, Tamil Nadu Agricultural University, Periyakulam 625 604, Tamil Nadu, India
7 shared publications - Anitha Thiyagarajan
Department of Postharvest Technology, Horticultural College and Research Institute, Tamil Nadu Agricultural University, Periyakulam 625 604, Tamil Nadu, India
5 shared publications - Subramanian Rajesh
Centre for Plant Molecular Biology, Tamil Nadu Agricultural University, Coimbatore 641 003, Tamil Nadu, India
5 shared publications - C Sankar
Horticultural College and Research Institute, Tamil Nadu Agricultural University, Periyakulam 625 604, India
3 shared publications - Kandasamy Venkatesan
Department of Floriculture and Landscape Architecture, Horticultural College and Research Institute, Tamil Nadu Agricultural University, Periyakulam, Theni, India
3 shared publications - Krishnan Kalpana
Department of Plant Protection, Horticultural College and Research Institute, Tamil Nadu Agricultural University, Periyakulam 625 604, Tamil Nadu, India
3 shared publications
Latest Publications
- Open Access
- 25 August 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Recent advances in mutagenesis for commercial fruit crop improvement: A comprehensive review
Mutagenesis, the deliberate induction of genetic alterations, plays a critical role in modern fruit crop improvement. This review explores the impact of mutagenesis methods discussed on diverse fruit crops, highlighting advancements in traits. Such as developing dwarf fruit mutant lines with enhanced resistance to biotic and abiotic stressors, seedlessness, yield and fruit quality have been a major focus recently. Traditional breeding techniques have often led to a genetic bottleneck, limiting. diversity available for crop improvement. To overcome these limitations, plant breeders have adopted innovative approaches like genome editing and mutation. The mutagenesis experiments aim for a 30-80 % survival rate of treated seeds or explants. This balance ensures a high enough mutation load without excessive lethality, which would reduce the population size for selection. In vitro random mutagenesis relies on the application of physical and chemical mutagens to increase the frequency of mutations thus accelerating the selection of varieties with important agronomic traits. Mutation breeding consists of three main elements to develop a new trait: mutation induction, selection of desirable mutants through phenotypic screening and genetic characterization using molecular markers. Mutation breeding involves three key steps: mutation induction, phenotypic selection and genetic characterization them using molecular markers (e.g., DNA markers, SNPs) to understand the genetic basis of the observed traits. The physical mutagens are successful; breeders are inclined breeders are given increasingly inclined to use novel genome editing tools like CRISPR/Cas9 gene editing technology to modify plants. The limitations of random mutagenesis, breeders are increasingly adopting novel genome editing technologies. Tools like Zinc Finger Nucleases (ZFNs), Transcription Activator-Like Effector Nucleases (TALENs), RNA interference (RNAi) and especially CRISPR/Cas systems offer several advantages. CRISPR/Cas9 offers precise genome editing capabilities. It enables targeted modifications that enhance desirable traits and address critical challenges in fruit production. This review provides mutagenesis techniques and their applications, emphasizing their importance in developing improved and sustainable fruit cultivars to meet the demands of a growing global population.
- 25 August 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Open AccessRecent advances in mutagenesis for commercial fruit crop improvement: A comprehensive review
Mutagenesis, the deliberate induction of genetic alterations, plays a critical role in modern fruit crop improvement. This review explores the impact of mutagenesis methods discussed on diverse fruit crops, highlighting advancements in traits. Such as developing dwarf fruit mutant lines with enhanced resistance to biotic and abiotic stressors, seedlessness, yield and fruit quality have been a major focus recently. Traditional breeding techniques have often led to a genetic bottleneck, limiting. diversity available for crop improvement. To overcome these limitations, plant breeders have adopted innovative approaches like genome editing and mutation. The mutagenesis experiments aim for a 30-80 % survival rate of treated seeds or explants. This balance ensures a high enough mutation load without excessive lethality, which would reduce the population size for selection. In vitro random mutagenesis relies on the application of physical and chemical mutagens to increase the frequency of mutations thus accelerating the selection of varieties with important agronomic traits. Mutation breeding consists of three main elements to develop a new trait: mutation induction, selection of desirable mutants through phenotypic screening and genetic characterization using molecular markers. Mutation breeding involves three key steps: mutation induction, phenotypic selection and genetic characterization them using molecular markers (e.g., DNA markers, SNPs) to understand the genetic basis of the observed traits. The physical mutagens are successful; breeders are inclined breeders are given increasingly inclined to use novel genome editing tools like CRISPR/Cas9 gene editing technology to modify plants. The limitations of random mutagenesis, breeders are increasingly adopting novel genome editing technologies. Tools like Zinc Finger Nucleases (ZFNs), Transcription Activator-Like Effector Nucleases (TALENs), RNA interference (RNAi) and especially CRISPR/Cas systems offer several advantages. CRISPR/Cas9 offers precise genome editing capabilities. It enables targeted modifications that enhance desirable traits and address critical challenges in fruit production. This review provides mutagenesis techniques and their applications, emphasizing their importance in developing improved and sustainable fruit cultivars to meet the demands of a growing global population.
- Open Access
- 29 May 2025
- Published by Horizon E-Publishing Group in Plant Science Today
- Vol. 12  (sp3)
Enhancing growth, yield and quality of mundu chilli (Capsicum annuum L.) through organic amendments for sustainable farming practice
A field study was conducted during 2023-24 in Ramanathapuram district, Tamil Nadu, to evaluate the effects of various organic amendments on the growth, yield and quality of mundu chilli (Capsicum annuum L.). The experiment involved ten treatments, including combinations of organic amendments like farmyard manure (FYM), vermicompost (VC), poultry manure (PM), fish amino acid (FAA), egg amino acid (EAA), Panchagavya and 3G extract, compared against the recommended dose of fertilizers (RDF) as a control, in a randomized block design with three replications. Significant variations were observed among treatments, with treatment T8 (PM at 6 t/ha + FAA at 3 % + 3G extract at 3 %) showing superior results. T8 recorded the highest plant height (91 cm), number of branches (10.50). Yield attributes were also highest in T8, including number of fruits per plant (58.50), fruit length (2.10 cm) and dry fruit yield per hectare (1224 kg). Quality parameters in T8 were notably enhanced, with higher capsaicin content (0.50 %), oleoresin content (25.56 %) and colour values (ASTA 250.00).
- 29 May 2025
- Published by Horizon E-Publishing Group in Plant Science Today
- Vol. 12  (sp3)
Open AccessEnhancing growth, yield and quality of mundu chilli (Capsicum annuum L.) through organic amendments for sustainable farming practice
A field study was conducted during 2023-24 in Ramanathapuram district, Tamil Nadu, to evaluate the effects of various organic amendments on the growth, yield and quality of mundu chilli (Capsicum annuum L.). The experiment involved ten treatments, including combinations of organic amendments like farmyard manure (FYM), vermicompost (VC), poultry manure (PM), fish amino acid (FAA), egg amino acid (EAA), Panchagavya and 3G extract, compared against the recommended dose of fertilizers (RDF) as a control, in a randomized block design with three replications. Significant variations were observed among treatments, with treatment T8 (PM at 6 t/ha + FAA at 3 % + 3G extract at 3 %) showing superior results. T8 recorded the highest plant height (91 cm), number of branches (10.50). Yield attributes were also highest in T8, including number of fruits per plant (58.50), fruit length (2.10 cm) and dry fruit yield per hectare (1224 kg). Quality parameters in T8 were notably enhanced, with higher capsaicin content (0.50 %), oleoresin content (25.56 %) and colour values (ASTA 250.00).
- Open Access
- 29 May 2025
- Published by Horizon E-Publishing Group in Plant Science Today
- Vol. 12  (sp3)
Effects of different soaking intervals on germination and vegetative growth attributes of cape gooseberry (Physalis peruviana L.) under tropical condition
The present investigation was carried out to study the effects of different soaking intervals on germination and vegetative growth attributes of cape gooseberry (Physalis peruviana L.) under tropical conditions. The experiment was carried out at the Department of Fruit Science, Horticultural College and Research Institute, Tamil Nadu Agricultural University, Periyakulam, Tamil Nadu, India during October 2024. The five treatments comprised five different soaking intervals of water i.e. T1: one-day soak, T2: two-day soak, T3: three-day soak, T4: four-day soak and T5: control (without soak). Among the five treatments, the highest percentage of germination was recorded in T2 with 93.00 % followed by T1 (77.00 %), T3 (68.00 %) and T5 (control) with 50.00 %, while T4 (40.00 %). The vegetative growth parameters of seedlings were recorded higher in T2 followed by T1, T3, T5 and T4. Two day soaking of seeds registered significant improvement in both seed germination and seedling growth of cape gooseberry.
- 29 May 2025
- Published by Horizon E-Publishing Group in Plant Science Today
- Vol. 12  (sp3)
Open AccessEffects of different soaking intervals on germination and vegetative growth attributes of cape gooseberry (Physalis peruviana L.) under tropical condition
The present investigation was carried out to study the effects of different soaking intervals on germination and vegetative growth attributes of cape gooseberry (Physalis peruviana L.) under tropical conditions. The experiment was carried out at the Department of Fruit Science, Horticultural College and Research Institute, Tamil Nadu Agricultural University, Periyakulam, Tamil Nadu, India during October 2024. The five treatments comprised five different soaking intervals of water i.e. T1: one-day soak, T2: two-day soak, T3: three-day soak, T4: four-day soak and T5: control (without soak). Among the five treatments, the highest percentage of germination was recorded in T2 with 93.00 % followed by T1 (77.00 %), T3 (68.00 %) and T5 (control) with 50.00 %, while T4 (40.00 %). The vegetative growth parameters of seedlings were recorded higher in T2 followed by T1, T3, T5 and T4. Two day soaking of seeds registered significant improvement in both seed germination and seedling growth of cape gooseberry.
- Open Access
- 29 May 2025
- Published by Horizon E-Publishing Group in Plant Science Today
- Vol. 12  (sp3)
Effect of consortia of biocontrol agents and organic amendments in confronting collar rot Sclerotium rolfsii Sacc.) disease in brinjal (Solanum melongena L.) for sustainable cultivation
Collar rot, caused by S. rolfsii, is a significant threat to brinjal cultivation in Tamil Nadu. The most virulent isolate of S. rolfsii, identified as IS(VIL)-9, exhibited the highest disease incidence (42.4 %) in field surveys and 92.56 % in pathogenicity tests of our previous studies. The Bacillus spp. and Trichoderma spp. exhibited antagonistic activity against S. rolfsii. Aqueous extracts of various oil cakes including neem, pungam, mahua, castor and cotton were prepared and tested for their antifungal efficacy against S. rolfsii. Among the oil cake extracts, neem oil cake (10 %) exhibited the highest inhibition of S. rolfsii growth (81.11 %), followed by mahua oil cake (76.66 %), pungam oil cake (57.77 %), castor oil cake (34.44 %) and cotton oil cake (18.88 %). In addition, a pot culture experiment was conducted to evaluate the effectiveness of combined applications of biocontrol agents and organic amendments against collar rot disease. Ten treatments were tested, including combinations of Bacillus sp., Trichoderma sp. and neem cake. Bacillus sp., Trichoderma sp. and neem oil cake are compatible with one another in the in vitro assay. Among the various integrated treatments, the combined application of both biocontrol agents, Bacillus sp. and Trichoderma sp., with neem cake (T8) reduced the disease incidence to 14.59 %. The control pots with only S. rolfsii inoculation showed a disease incidence of 80.60 %. This study demonstrated that the integrated use of biocontrol agents and organic amendments such as neem cake and oil cake extracts significantly reduces the incidence of collar rot caused by S. rolfsii in brinjal cultivation providing an eco-friendly alternative to chemical control.
- 29 May 2025
- Published by Horizon E-Publishing Group in Plant Science Today
- Vol. 12  (sp3)
Open AccessEffect of consortia of biocontrol agents and organic amendments in confronting collar rot Sclerotium rolfsii Sacc.) disease in brinjal (Solanum melongena L.) for sustainable cultivation
Collar rot, caused by S. rolfsii, is a significant threat to brinjal cultivation in Tamil Nadu. The most virulent isolate of S. rolfsii, identified as IS(VIL)-9, exhibited the highest disease incidence (42.4 %) in field surveys and 92.56 % in pathogenicity tests of our previous studies. The Bacillus spp. and Trichoderma spp. exhibited antagonistic activity against S. rolfsii. Aqueous extracts of various oil cakes including neem, pungam, mahua, castor and cotton were prepared and tested for their antifungal efficacy against S. rolfsii. Among the oil cake extracts, neem oil cake (10 %) exhibited the highest inhibition of S. rolfsii growth (81.11 %), followed by mahua oil cake (76.66 %), pungam oil cake (57.77 %), castor oil cake (34.44 %) and cotton oil cake (18.88 %). In addition, a pot culture experiment was conducted to evaluate the effectiveness of combined applications of biocontrol agents and organic amendments against collar rot disease. Ten treatments were tested, including combinations of Bacillus sp., Trichoderma sp. and neem cake. Bacillus sp., Trichoderma sp. and neem oil cake are compatible with one another in the in vitro assay. Among the various integrated treatments, the combined application of both biocontrol agents, Bacillus sp. and Trichoderma sp., with neem cake (T8) reduced the disease incidence to 14.59 %. The control pots with only S. rolfsii inoculation showed a disease incidence of 80.60 %. This study demonstrated that the integrated use of biocontrol agents and organic amendments such as neem cake and oil cake extracts significantly reduces the incidence of collar rot caused by S. rolfsii in brinjal cultivation providing an eco-friendly alternative to chemical control.
- Open Access
- 29 May 2025
- Published by Horizon E-Publishing Group in Plant Science Today
- Vol. 12  (sp3)
Evaluation of chinese potato (Plectranthus rotundifolius) germplasms under coconut-based cropping system in Tamil Nadu
Coconut (Cocos nucifera L.), a key plantation crop in India, contributes significantly to the national economy. Despite high productivity, coconut farmers face challenges including fragmented landholdings and biotic stress, necessitating the adoption of intercropping systems to improve land use efficiency and profitability. Intercropping shade-tolerant tuber crops like Chinese potato (Plectranthus rotundifolius), particularly in the underutilized interspaces of coconut plantations, offers multiple agronomic and economic benefits. An experiment was conducted during the 2024-25 kharif season in Theni district, Tamil Nadu, to evaluate the performance of 40 Chinese potato germplasms under an 8-year-old coconut plantation. The study followed a randomized block design with three replications. Data on growth and yield parameters such as number of branches, days to flowering, tuber dimensions, tuber count and fresh tuber weight were recorded and statistically analyzed. Germplasm PKM-CP-2 exhibited superior performance in tuber length, width, number and yield (333.8 g plant-1), followed by PKM-CP-10, PKM-CP-4 and PKM-CP-8. In contrast, PKM-CP-23 consistently showed the lowest performance across several traits. The results suggest substantial genotypic variation among germplasms, with certain accessions demonstrating promising yield potential for intercropping systems. The study highlights the viability of integrating Chinese potato as a high-value secondary crop in coconut plantations, providing enhanced income opportunities for smallholder farmers and optimizing resource utilization. Further exploration of high-performing germplasms could support commercialization and diversification in coconut-based farming systems.
- 29 May 2025
- Published by Horizon E-Publishing Group in Plant Science Today
- Vol. 12  (sp3)
Open AccessEvaluation of chinese potato (Plectranthus rotundifolius) germplasms under coconut-based cropping system in Tamil Nadu
Coconut (Cocos nucifera L.), a key plantation crop in India, contributes significantly to the national economy. Despite high productivity, coconut farmers face challenges including fragmented landholdings and biotic stress, necessitating the adoption of intercropping systems to improve land use efficiency and profitability. Intercropping shade-tolerant tuber crops like Chinese potato (Plectranthus rotundifolius), particularly in the underutilized interspaces of coconut plantations, offers multiple agronomic and economic benefits. An experiment was conducted during the 2024-25 kharif season in Theni district, Tamil Nadu, to evaluate the performance of 40 Chinese potato germplasms under an 8-year-old coconut plantation. The study followed a randomized block design with three replications. Data on growth and yield parameters such as number of branches, days to flowering, tuber dimensions, tuber count and fresh tuber weight were recorded and statistically analyzed. Germplasm PKM-CP-2 exhibited superior performance in tuber length, width, number and yield (333.8 g plant-1), followed by PKM-CP-10, PKM-CP-4 and PKM-CP-8. In contrast, PKM-CP-23 consistently showed the lowest performance across several traits. The results suggest substantial genotypic variation among germplasms, with certain accessions demonstrating promising yield potential for intercropping systems. The study highlights the viability of integrating Chinese potato as a high-value secondary crop in coconut plantations, providing enhanced income opportunities for smallholder farmers and optimizing resource utilization. Further exploration of high-performing germplasms could support commercialization and diversification in coconut-based farming systems.
- Open Access
- 28 April 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Exploring genetic diversity in banana germplasm utilizing multivariate analysis for morphological and yield attributes
Bananas have different ploidy levels, including diploid, triploid and tetraploid, while triploids are most widely used in breeding programs. Although diploid and tetraploid plants have the potential to improve yield and other agronomic traits, they remain underutilized in crop improvement. This study uses multivariate analysis to evaluate the morphological and yield characteristics of 20 banana germplasm accessions belonging to the genome group AA, AB, AAA, AAB, ABB and AAAB. The findings revealed that substantial genetic variation was observed among the accession. Red Banana exhibited the tallest pseudostem height in morphological traits, while Karpooravalli had the largest pseudostem girth. Yield attributes indicated that Grand Naine and Gros Micheal recorded the highest bunch weights, while Calcutta 4 had the lowest. Additionally, Nendran has distinctive yield characteristics like longest finger length (FL), girth and weight. Correlation analysis showed a positive relationship between morphological and yield parameters such as pseudostem height, girth and bunch weight. Regression analysis revealed that pseudostem girth, leaf length and number of hands per bunch significantly contributed to bunch weight with an R2 value of 0.80. Hierarchical clustering divided the accessions into three groups based on morphology and yield characteristics. Nendran and Red Banana were in one cluster, showing their genetic similarity. The clustering pattern suggests that these accessions have similar agronomic traits that could be useful for targeted breeding strategies. Principal component analysis (PCA) revealed that the first principal components accounted for 81.7% of the total variance, with major contributors including pseudostem girth, finger weight (FW) and bunch weight. Thus, these findings highlight the morphological and yield variations within banana germplasm and identify promising cultivars and traits for targeted breeding programs to enhance productivity and fruit quality.
- 28 April 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Open AccessExploring genetic diversity in banana germplasm utilizing multivariate analysis for morphological and yield attributes
Bananas have different ploidy levels, including diploid, triploid and tetraploid, while triploids are most widely used in breeding programs. Although diploid and tetraploid plants have the potential to improve yield and other agronomic traits, they remain underutilized in crop improvement. This study uses multivariate analysis to evaluate the morphological and yield characteristics of 20 banana germplasm accessions belonging to the genome group AA, AB, AAA, AAB, ABB and AAAB. The findings revealed that substantial genetic variation was observed among the accession. Red Banana exhibited the tallest pseudostem height in morphological traits, while Karpooravalli had the largest pseudostem girth. Yield attributes indicated that Grand Naine and Gros Micheal recorded the highest bunch weights, while Calcutta 4 had the lowest. Additionally, Nendran has distinctive yield characteristics like longest finger length (FL), girth and weight. Correlation analysis showed a positive relationship between morphological and yield parameters such as pseudostem height, girth and bunch weight. Regression analysis revealed that pseudostem girth, leaf length and number of hands per bunch significantly contributed to bunch weight with an R2 value of 0.80. Hierarchical clustering divided the accessions into three groups based on morphology and yield characteristics. Nendran and Red Banana were in one cluster, showing their genetic similarity. The clustering pattern suggests that these accessions have similar agronomic traits that could be useful for targeted breeding strategies. Principal component analysis (PCA) revealed that the first principal components accounted for 81.7% of the total variance, with major contributors including pseudostem girth, finger weight (FW) and bunch weight. Thus, these findings highlight the morphological and yield variations within banana germplasm and identify promising cultivars and traits for targeted breeding programs to enhance productivity and fruit quality.
- Open Access
- 18 April 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Postharvest handling and value added products of tomato to enhance the profitability of farmers
Effective postharvest handling and value addition of tomatoes are crucial for enhancing farmers’ profitability. Tomatoes, as a highly perishable crop, often experience significant losses during postharvest stages due to insufficient storage and handling practices. Postharvest losses of horticultural crops, ranging from 20% to 40%, create a substantial gap in market potential. This study explores various postharvest handling techniques and value addition strategies to reduce losses and enhance economic outcomes for tomato growers. The review highlights key postharvest practices, including optimal storage conditions, efficient sorting and grading and advanced preservation methods, which collectively extend the shelf life of tomatoes and reduce spoilage. Additionally, the study underscores the potential of value added products, such as tomato sauces, powders and canned goods, to enhance the market value of tomatoes. Transforming raw tomatoes into high demand products enable farmers to access new revenue streams and decrease reliance on fresh market sales. The findings indicate that adopting improved postharvest handling methods and leveraging value addition opportunities can significantly boost farmers’ profitability. These practices not only reduce waste but also provide economic benefits through higher value products and improved market positioning. Overall, the study highlights the importance of innovative postharvest management and product development approaches for achieving sustainable economic growth in the tomato farming sector.
- 18 April 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Open AccessPostharvest handling and value added products of tomato to enhance the profitability of farmers
Effective postharvest handling and value addition of tomatoes are crucial for enhancing farmers’ profitability. Tomatoes, as a highly perishable crop, often experience significant losses during postharvest stages due to insufficient storage and handling practices. Postharvest losses of horticultural crops, ranging from 20% to 40%, create a substantial gap in market potential. This study explores various postharvest handling techniques and value addition strategies to reduce losses and enhance economic outcomes for tomato growers. The review highlights key postharvest practices, including optimal storage conditions, efficient sorting and grading and advanced preservation methods, which collectively extend the shelf life of tomatoes and reduce spoilage. Additionally, the study underscores the potential of value added products, such as tomato sauces, powders and canned goods, to enhance the market value of tomatoes. Transforming raw tomatoes into high demand products enable farmers to access new revenue streams and decrease reliance on fresh market sales. The findings indicate that adopting improved postharvest handling methods and leveraging value addition opportunities can significantly boost farmers’ profitability. These practices not only reduce waste but also provide economic benefits through higher value products and improved market positioning. Overall, the study highlights the importance of innovative postharvest management and product development approaches for achieving sustainable economic growth in the tomato farming sector.
- Open Access
- 3 March 2025
- Published by Horizon E-Publishing Group in Plant Science Today
M4 generation of moringa (Moringa oleifera Lam.) mutants revealing genetic diversity for leaf traits based on SSR markers
This study was conducted to develop a variety suitable for high leaf production in moringa. Initially, seeds of PKM 1 variety of moringa were treated with gamma irradiation of 100 Gy (Gray), 200 Gy and 300 Gy at Bhabha Atomic Research Centre (BARC), Mumbai and raised as M1 generation. The best-performing mutants were selected and forwarded to further generations (M1 to M4) based on leaf-related characters. A total of 10 Indian drumsticks (Moringa oleifera Lam.) mutants (derived from 200 Gy of gamma irradiation) from M4 generation with PKM 1 variety were evaluated for morphological and molecular diversity. To evaluate morphological diversity, 4 features (leaf length, leaf breadth, fresh weight and dry weight) were studied under field conditions. Ten sets of markers for simple sequence repeats (SSR), i.e. GenicSSR1081, SSR25987, SSR2927, GenicSSR859, GenicSSR796, SSR6561, GenicSSR890, GenicSSR1204, GenicSSR983 and GenicSSR778; that generated distinct and repeatable bands; were chosen for analyzing molecular diversity. A total of 24 bands were amplified, of which 17 were polymorphic. With an average of 0.391, the polymorphic information content (PIC) values for SSR markers varied from 0.124 for marker SSR2927 to 0.719 for marker GenicSSR778. Based on the cluster analysis with SSR markers, the mutants are divided into 2 groups. The variety PKM 1 was separated by a group whereas; all the other mutants fell into a single group indicating the diversity of mutants from the control. The diverse mutants (15-1-09-70 and 15-1-09-53) based on both morphological and molecular observations were selected and suggested for evaluation through subsequent generations that have the potential to be released as a variety for high leaf production. By increasing the production of highly nutritious moringa leaf, self-sufficiency and nutritional security can be obtained as well as it could benefit the lifestyle improvement of farmers through export to countries where the crop demand is high.
- 3 March 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Open AccessM4 generation of moringa (Moringa oleifera Lam.) mutants revealing genetic diversity for leaf traits based on SSR markers
This study was conducted to develop a variety suitable for high leaf production in moringa. Initially, seeds of PKM 1 variety of moringa were treated with gamma irradiation of 100 Gy (Gray), 200 Gy and 300 Gy at Bhabha Atomic Research Centre (BARC), Mumbai and raised as M1 generation. The best-performing mutants were selected and forwarded to further generations (M1 to M4) based on leaf-related characters. A total of 10 Indian drumsticks (Moringa oleifera Lam.) mutants (derived from 200 Gy of gamma irradiation) from M4 generation with PKM 1 variety were evaluated for morphological and molecular diversity. To evaluate morphological diversity, 4 features (leaf length, leaf breadth, fresh weight and dry weight) were studied under field conditions. Ten sets of markers for simple sequence repeats (SSR), i.e. GenicSSR1081, SSR25987, SSR2927, GenicSSR859, GenicSSR796, SSR6561, GenicSSR890, GenicSSR1204, GenicSSR983 and GenicSSR778; that generated distinct and repeatable bands; were chosen for analyzing molecular diversity. A total of 24 bands were amplified, of which 17 were polymorphic. With an average of 0.391, the polymorphic information content (PIC) values for SSR markers varied from 0.124 for marker SSR2927 to 0.719 for marker GenicSSR778. Based on the cluster analysis with SSR markers, the mutants are divided into 2 groups. The variety PKM 1 was separated by a group whereas; all the other mutants fell into a single group indicating the diversity of mutants from the control. The diverse mutants (15-1-09-70 and 15-1-09-53) based on both morphological and molecular observations were selected and suggested for evaluation through subsequent generations that have the potential to be released as a variety for high leaf production. By increasing the production of highly nutritious moringa leaf, self-sufficiency and nutritional security can be obtained as well as it could benefit the lifestyle improvement of farmers through export to countries where the crop demand is high.
- Open Access
- 24 February 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Enhancing brinjal resilience to little leaf disease through bio-intensive management
Little leaf disease, caused by Candidatus Phytoplasma trifolii, is a major risk to brinjal cultivation, leading to reduced yield and quality. Traditional chemical control methods offer only temporary relief and pose environmental risks. This study aimed to develop a bio-intensive strategy for managing little leaf disease by identifying effective rhizobacterial isolates with plant growth-promoting traits. Among 100 isolates screened, Bacillus licheniformis (B 67) demonstrated the highest indole-3-acetic acid (IAA) activity, siderophore activity and phosphorus solubilisation, followed by isolate B 38. Pot culture experiments revealed that treatments involving seedling treatment and drenching with B. licheniformis (B 67) or Bacillus subtilis (Bbv 57), combined with need-based application of neem seed kernel extract (NSKE 5%), demonstrated significant reductions in disease incidence and improvements in plant health. Field trials validated the efficacy of an Integrated Pest and Disease Management (IPDM) module developed from the findings of pot culture studies. The module comprised seedling treatment with B. licheniformis (B 67) and B. subtilis, drenching with humic acid, foliar applications of ferrous sulphate and zinc sulphate and targeted chemical sprays. This approach achieved the lowest disease incidence and significantly improved yield compared to untreated controls. The study underscores the potential of bio-intensive management strategies integrating rhizobacteria, micronutrients and eco-friendly sprays to sustainably manage little leaf disease while enhancing crop resilience and productivity. These results provide evidence for environmentally safe and effective alternatives to chemical-based disease management in brinjal cultivation.
- 24 February 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Open AccessEnhancing brinjal resilience to little leaf disease through bio-intensive management
Little leaf disease, caused by Candidatus Phytoplasma trifolii, is a major risk to brinjal cultivation, leading to reduced yield and quality. Traditional chemical control methods offer only temporary relief and pose environmental risks. This study aimed to develop a bio-intensive strategy for managing little leaf disease by identifying effective rhizobacterial isolates with plant growth-promoting traits. Among 100 isolates screened, Bacillus licheniformis (B 67) demonstrated the highest indole-3-acetic acid (IAA) activity, siderophore activity and phosphorus solubilisation, followed by isolate B 38. Pot culture experiments revealed that treatments involving seedling treatment and drenching with B. licheniformis (B 67) or Bacillus subtilis (Bbv 57), combined with need-based application of neem seed kernel extract (NSKE 5%), demonstrated significant reductions in disease incidence and improvements in plant health. Field trials validated the efficacy of an Integrated Pest and Disease Management (IPDM) module developed from the findings of pot culture studies. The module comprised seedling treatment with B. licheniformis (B 67) and B. subtilis, drenching with humic acid, foliar applications of ferrous sulphate and zinc sulphate and targeted chemical sprays. This approach achieved the lowest disease incidence and significantly improved yield compared to untreated controls. The study underscores the potential of bio-intensive management strategies integrating rhizobacteria, micronutrients and eco-friendly sprays to sustainably manage little leaf disease while enhancing crop resilience and productivity. These results provide evidence for environmentally safe and effective alternatives to chemical-based disease management in brinjal cultivation.
- Open Access
- 24 January 2025
- Published by Horizon E-Publishing Group in Plant Science Today
A comprehensive review on impact of climatic change on adaptability and mitigation in fruit crop
Global warming and climate change are among the most pressing challenges confronting humanity in the 21st century. Climate change will result in rising temperatures, changes in rainfall patterns and an increased occurrence of extreme weather events, such as heatwaves, cold spells, frost days, droughts and floods. The effects of climate change have recently become more evident, with rising temperatures, altered and irregular precipitation patterns and increased extreme weather events. These changes are directly impacting the maturity and development of fruit crops. Heat stress during flowering and fruit set can greatly reduce fruit production, while irregular rainfall may disrupt pollination and heighten the risk of pests and diseases. Furthermore, increased carbon dioxide levels can influence the quality characteristics of fruits. To maintain the ongoing production and sustainability of fruit crops, it is vital to enhance resilience. Focusing on developing new varieties that offer higher yield potential and resistance to various stresses, such as drought, flooding and salinity, is crucial for sustaining crop yields. Additionally, breeding programs should aim to enhance the germplasm of key tropical and subtropical fruit crops to improve heat stress tolerance. Recent advancements in genetic editing technologies present substantial opportunities for the agricultural sector, especially in enhancing fruit crop traits. These innovations can be precisely tailored to meet consumer preferences, which is crucial for driving commercial success. In this review, we strive to provide a comprehensive overview of the current understanding of this important topic, along with recommendations for future research.
- 24 January 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Open AccessA comprehensive review on impact of climatic change on adaptability and mitigation in fruit crop
Global warming and climate change are among the most pressing challenges confronting humanity in the 21st century. Climate change will result in rising temperatures, changes in rainfall patterns and an increased occurrence of extreme weather events, such as heatwaves, cold spells, frost days, droughts and floods. The effects of climate change have recently become more evident, with rising temperatures, altered and irregular precipitation patterns and increased extreme weather events. These changes are directly impacting the maturity and development of fruit crops. Heat stress during flowering and fruit set can greatly reduce fruit production, while irregular rainfall may disrupt pollination and heighten the risk of pests and diseases. Furthermore, increased carbon dioxide levels can influence the quality characteristics of fruits. To maintain the ongoing production and sustainability of fruit crops, it is vital to enhance resilience. Focusing on developing new varieties that offer higher yield potential and resistance to various stresses, such as drought, flooding and salinity, is crucial for sustaining crop yields. Additionally, breeding programs should aim to enhance the germplasm of key tropical and subtropical fruit crops to improve heat stress tolerance. Recent advancements in genetic editing technologies present substantial opportunities for the agricultural sector, especially in enhancing fruit crop traits. These innovations can be precisely tailored to meet consumer preferences, which is crucial for driving commercial success. In this review, we strive to provide a comprehensive overview of the current understanding of this important topic, along with recommendations for future research.