Qingming Qiu

In order to reveal the intrinsic mechanism of the mechanical properties of lime-treated sandy soil from a microscopic perspective, triaxial tests were conducted to analyze the macroscopic mechanical characteristics of sandy soil with different lime contents (0%, 5%, 8%, and 12%). The changes in the microstructure of the lime-treated sandy soil were studied through scanning electron microscopy, energy-dispersive spectroscopy, and mercury intrusion tests, combined with fractal theory for quantitative characterization. The results indicate that the stress–strain curve of lime-treated sandy soil can be divided into four stages: linear elastic, non-linear, failure, and residual strength. With the increase in lime content, the peak stress and cohesion first increase and then decrease, while the internal friction angle first decreases and then increases, suggesting the presence of an optimal threshold for lime content between 5% and 12%. The failure mode transitions from diagonal shear failure to bulging failure, significantly enhancing stability; both the fitted Mohr–Coulomb and Drucker–Prager failure criteria effectively reflect the failure patterns of the specimens in principal stress space. The results based on the three fractal dimensions demonstrate that lime-treated sandy soil exhibits clear fractal characteristics, with the highest fractal dimension value at a lime content of 8%, corresponding to the highest overall strength. In addition, the fractal dimension shows a binomial relationship with pore characteristic parameters and shear strength parameters; it can effectively characterize the complexity of the microstructure and accurately predict changes in shear strength parameters.

Utilization of large aggregates can promote energy conservation and emissions reductions, and large aggregates have been widely used in hydraulic concrete. The failure criterion for concrete material utilizing large aggregates forms the basis for constitutive models and structural design. However, the concrete failure criterion with respect to large aggregates has never been researched. To this end, the authors first conducted a series of triaxial compressive tests on concrete specimens with scaled aggregates. On this basis, several 3D mesoscopic numerical models were established with different aggregate gradations and used to simulate the triaxial compressive behaviors of hydraulic concrete after the models had been verified by experimental results. The results showed a pronounced aggregate-gradation effect on triaxial compressive behaviors, and concrete mixes with larger aggregates usually have higher compressive strength, especially under conditions of higher confinement. The normalized peak strength can increase by up to 23.49%. Finally, based on the available testing data, the strength criterion in different constitutive models is discussed and modified to allow more accurate simulation of the dynamic responses of and damage to fully graded concrete structures. This result can provide a theoretical basis on which construction entities can optimize the mix proportions of fully graded concrete and detect the failure modes of concrete structures.