Jiwei Yao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jiwei Yao has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
Lunbo Duan
3 shared publicationsMin-Min Zhou
3 shared publications- Chun Zhu
Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing, 210096, China
2 shared publications Jiaze Ma
2 shared publications- Kody Merlin Powell
Energy & Geoscience Institute, University of Utah, Salt Lake City, United States, USA
2 shared publications Wangqi Wu
2 shared publications
Latest Publications
- Open Access
- 7 July 2026
- Published by Elsevier in SSRN Electronic Journal
Physics-Constrained Deep Operator Network for Remaining Useful Life Prediction of Li-ion Batteries with Early-Cycle Data
Accurate remaining useful life (RUL) prediction of lithium-ion batteries is essential for safe, reliable, and cost-effective battery management. However, many existing data-driven methods rely on continuous long-term cycling histories and may generate physically inconsistent predictions under limited or irregularly sampled degradation data. This study proposes a physics-constrained deep operator network (PC-DON) for battery RUL prediction without requiring continuous cycling histories. The proposed framework formulates RUL prediction as an operator-learning problem, in which early-cycle incremental capacity (IC) curves are used as cell-specific degradation signatures, while current-cycle electrochemical descriptors are used to characterize the instantaneous degradation state. By combining these two types of information, the model can predict RUL at different aging stages using limited early-life information and current-cycle measurements, rather than relying on complete historical degradation trajectories. To improve physical consistency, three candidate physics-based constraints are evaluated, including cycle-number monotonicity, SOH–RUL consistency, and RUL–SOH curvature. Results show that the first-order monotonicity and SOH–RUL consistency constraints provide the most effective regularization. On a dataset of 124 commercial cells, the optimized PC-DON achieves an RMSE of 104.14 cycles, MAE of 68.96 cycles, MAPE of 18.75%, and F1-score of 0.72, outperforming both the unconstrained model and the benchmark PINN. Additional analyses of physics-loss combinations, early-cycle window length, latent-feature correlation, SHAP-based feature importance, transferability, and economic implications further demonstrate the accuracy, interpretability, and practical potential of the proposed framework for battery health prognosis.
- 7 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessPhysics-Constrained Deep Operator Network for Remaining Useful Life Prediction of Li-ion Batteries with Early-Cycle Data
Accurate remaining useful life (RUL) prediction of lithium-ion batteries is essential for safe, reliable, and cost-effective battery management. However, many existing data-driven methods rely on continuous long-term cycling histories and may generate physically inconsistent predictions under limited or irregularly sampled degradation data. This study proposes a physics-constrained deep operator network (PC-DON) for battery RUL prediction without requiring continuous cycling histories. The proposed framework formulates RUL prediction as an operator-learning problem, in which early-cycle incremental capacity (IC) curves are used as cell-specific degradation signatures, while current-cycle electrochemical descriptors are used to characterize the instantaneous degradation state. By combining these two types of information, the model can predict RUL at different aging stages using limited early-life information and current-cycle measurements, rather than relying on complete historical degradation trajectories. To improve physical consistency, three candidate physics-based constraints are evaluated, including cycle-number monotonicity, SOH–RUL consistency, and RUL–SOH curvature. Results show that the first-order monotonicity and SOH–RUL consistency constraints provide the most effective regularization. On a dataset of 124 commercial cells, the optimized PC-DON achieves an RMSE of 104.14 cycles, MAE of 68.96 cycles, MAPE of 18.75%, and F1-score of 0.72, outperforming both the unconstrained model and the benchmark PINN. Additional analyses of physics-loss combinations, early-cycle window length, latent-feature correlation, SHAP-based feature importance, transferability, and economic implications further demonstrate the accuracy, interpretability, and practical potential of the proposed framework for battery health prognosis.
- Open Access
- 24 June 2026
- Published by Elsevier in SSRN Electronic Journal
Physics-Constrained Deep Operator Network for Remaining Useful Life Prediction of Li-ion Batteries with Early-Cycle Data
Accurate remaining useful life (RUL) prediction of lithium-ion batteries (LIBs) is critical for safe, reliable, and cost-effective operation of battery-powered systems. Existing data-driven approaches often require long-term cycling histories and may produce physically inconsistent predictions, while physics-based models can be limited by complexity and parameter-identification challenges. This paper proposes a physics-constrained deep operator network (PC-DON) for early-cycle battery RUL prediction. The framework uses a branch network to learn cell-specific degradation patterns from early-cycle incremental capacity curves and a trunk network to represent cycle-level degradation states. Three physics-based constraints are designed and evaluated to enhance physical consistency and generalization. The method is tested on 124 commercial LIB cells and compared with a benchmark physics-informed neural network. Results demonstrate improved accuracy and robustness. Additional analyses of physics-loss combinations, early-cycle selection, and SHAP-based feature importance confirm the framework’s effectiveness, interpretability, and potential for early-stage battery health prognosis.
- 24 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessPhysics-Constrained Deep Operator Network for Remaining Useful Life Prediction of Li-ion Batteries with Early-Cycle Data
Accurate remaining useful life (RUL) prediction of lithium-ion batteries (LIBs) is critical for safe, reliable, and cost-effective operation of battery-powered systems. Existing data-driven approaches often require long-term cycling histories and may produce physically inconsistent predictions, while physics-based models can be limited by complexity and parameter-identification challenges. This paper proposes a physics-constrained deep operator network (PC-DON) for early-cycle battery RUL prediction. The framework uses a branch network to learn cell-specific degradation patterns from early-cycle incremental capacity curves and a trunk network to represent cycle-level degradation states. Three physics-based constraints are designed and evaluated to enhance physical consistency and generalization. The method is tested on 124 commercial LIB cells and compared with a benchmark physics-informed neural network. Results demonstrate improved accuracy and robustness. Additional analyses of physics-loss combinations, early-cycle selection, and SHAP-based feature importance confirm the framework’s effectiveness, interpretability, and potential for early-stage battery health prognosis.
- Open Access
- 19 December 2025
- Published by Elsevier in Energy Conversion and Management
- Vol. 350
Optimal sizing of battery energy storage systems for peak shaving and demand response using a degradation-aware Bayesian Optimization-Mixed-Integer Linear Programming framework
- 19 December 2025
- Published by Elsevier in Energy Conversion and Management
- Vol. 350
Open AccessOptimal sizing of battery energy storage systems for peak shaving and demand response using a degradation-aware Bayesian Optimization-Mixed-Integer Linear Programming framework
- 9 March 2025
- Published by Elsevier in Particuology
- Vol. 99, 226-242
Detailed assessment with sensitivity analysis of solid stress model in MP-PIC simulation for bubbling fluidized beds
- 9 March 2025
- Published by Elsevier in Particuology
- Vol. 99, 226-242
Detailed assessment with sensitivity analysis of solid stress model in MP-PIC simulation for bubbling fluidized beds
- Open Access
A Physics–Guided Machine Learning Approach for Capacity Fading Mechanism Detection and Fading Rate Prediction Using Early Cycle Data
Lithium–ion battery development necessitates predicting capacity fading using early cycle data to minimize testing time and costs. This study introduces a hybrid physics–guided data–driven approach to address this challenge by accurately determining the dominant fading mechanism and predicting the average capacity fading rate. Physics–guided features, derived from the electrochemical properties and behaviors within the battery, are extracted from the first five cycles to provide meaningful, interpretable, and predictive data. Unlike previous models that rely on a single regression approach, our method utilizes two separate regression models tailored to the identified dominant fading mechanisms. Our model achieves 95.6% accuracy in determining the dominant fading mechanism using data from the second cycle and a mean absolute percentage error of 17.09% in predicting lifetime capacity fade from the first five cycles. This represents a substantial improvement over state–of–the–art models, which have an error rate approximately three times higher. This study underscores the significance of physics–guided data characterization and the necessity of identifying the primary fading mechanism prior to predicting the capacity fading rate in lithium–ion batteries.
Open AccessA Physics–Guided Machine Learning Approach for Capacity Fading Mechanism Detection and Fading Rate Prediction Using Early Cycle Data
Lithium–ion battery development necessitates predicting capacity fading using early cycle data to minimize testing time and costs. This study introduces a hybrid physics–guided data–driven approach to address this challenge by accurately determining the dominant fading mechanism and predicting the average capacity fading rate. Physics–guided features, derived from the electrochemical properties and behaviors within the battery, are extracted from the first five cycles to provide meaningful, interpretable, and predictive data. Unlike previous models that rely on a single regression approach, our method utilizes two separate regression models tailored to the identified dominant fading mechanisms. Our model achieves 95.6% accuracy in determining the dominant fading mechanism using data from the second cycle and a mean absolute percentage error of 17.09% in predicting lifetime capacity fade from the first five cycles. This represents a substantial improvement over state–of–the–art models, which have an error rate approximately three times higher. This study underscores the significance of physics–guided data characterization and the necessity of identifying the primary fading mechanism prior to predicting the capacity fading rate in lithium–ion batteries.