IKIsak Kotcioglu

Isak Kotcioglu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Isak Kotcioglu has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Analysis of Flow Resistance in Trifurcation Fluid Networks

    by M. Mustafaoglu, M. Kaan Yesilyurt, İ. Kotcioglu, M. Allahyari

    In branch-like structures, branching parameters such as branching diameter, angle, length and number of levels, as well as branching number, have been important research topics in the field of fluid transport. In such flow systems, the fluid is transported to different branches with the help of the main pipe. The present study aims to investigate equi-diameter and unequi-diameter trifurcation flow systems designed according to Murray's law on flow resistance and pressure loss for a given velocity and pressure. By examining the flow model passing through the trifurcation flow system with 3D flow modeling, designs have been developed to provide the lowest pressure, least vortex formation and most efficient flow. The flow resistance for trifurcation branching for equal-diameter and unequal-diameter branching networks and terminal branch diameters are compared, and the lowest energy loss was found to occur when the diameter of two branches is equal at all three branches.


  • Open Access

    Numerical analysis of the three-dimensional model of pulsatile and non-Newtonian blood flow in a carotid artery with local occlusion

    by Mansur Mustafaoğlu, İsAk Kotçioğlu, Muhammet Kaan Yeşilyurt

    The analysis of blood flow in blood vessels, particularly in arteries, is a topic with important clinical applications. The blood can undergo a reduction in its viscosity under shear stress, which is called shear thinning. In this study, the effect of the shear thinning of blood is simulated using the Carreau-Yasuda model, neglecting the viscoelastic effects. The purpose of this investigation is to analyze the pulsatile blood flow in a three-dimensional model of the carotid artery and the effects of occlusion using Ansys Fluent. The results obtained in this study show that, compared to Newtonian fluids, non-Newtonian fluids exhibit significant differences in secondary flow patterns and shear flow behavior. Additionally, the axial velocity in the non-planar branch decreases with obstruction. The maximum shear stress of the walls with Newtonian fluid viscosity exhibits a significant error, and the values are lower than those of walls with non-Newtonian viscosity in most cases. In continuation of this research, vessel occlusion models with different occlusion sizes are analyzed. In the case where the outlet of the vessel is narrowed, an increase in velocity is observed in the furcation area. Although the software cannot simulate rupture, occlusion of the vessel at 80\% and 50\% of the internal diameter is analyzed.


  • Heat transfer analysis of armchair (5, 5) and zigzag (10, 0) carbon nanotubes

    by Isak Kotcioglu, Mansour Nasiri Khalaji, Nihat Dogan

    The technological interest for a given material depends very much on its thermal properties. The carbon nanotubes forming atoms a circular structure with a diameter of the order of 1 nm, but with a length which can be up to several hundred microns. This makes the carbon nanotubes to form an excellent model for one-dimensional systems. Much research has been devoted to the manufacture of carbon nanotubes, which are expected to represent the material that will be included in the next generation of heat exchangers components. Despite all the attention that carbon nanotubes have attracted from a scientific perspective, the theoretical understanding of them only developed relatively limited. Stability and performance of nano-device control plays a critical role in the heat conduction of nanotubes. Carbon nanotubes are one-atom thick as small-sized materials are excellent conductors of heat. In this context, in the present study by the method of finite element mesh based thermal behavior of carbon nanotubes are examined. In this study the lattice thermal conductivity of nanotubes is to see the effect. Single-walled and multiwalled carbon nanotubes in the ANSYS simulation technique has been developed and implemented. This method is different in the lattice of the nanotubes was used to compare the heat conduction. The number of bonds is equal to the number of atoms and nanotubes are modeled. Lattice structure which is different armchair (5, 5) and zigzag (10, 0) nanotube thermal conductivity, were compared. The results presented, the proposed finite element model, to study the thermal behavior of carbon nanotubes, have shown an important method.


  • The Second Law Analysis of Thermodynamics for the Plate–Fin Surface Performance in a Cross Flow Heat Exchanger

    by Mansour Nasiri Khalaji, Isak Kotcioglu, Sinan Caliskan, Ahmet Cansiz

    In this paper, a particular heat exchanger is designed and analyzed by using second law of thermodynamics. The heat exchanger operates with the cross flow forced convection having cylindrical, square, and hexagonal pin fins (tubular router) placed in the rectangular duct. The pin fins are installed periodically at the top and bottom plates of the duct perpendicular to the flow direction, structured in-line, and staggered sheet layouts. The entropy generation in the flow domain of the channels is calculated to demonstrate the rate of irreversibilities. To obtain the efficiencies, irreversibility, thermal performance factor, and entropy generation number (EGN), the heat exchanger is operated at different temperatures and flow rates by using hot and cold fluids. Optimization of the design parameters and winglet geometry associated with the performance are determined by entropy generation minimization. The variation of the EGN with Reynolds number for various tubular routers is presented. The Reynolds number is determined according to the experimental plan and the performance is analyzed with the method of effectiveness—number of transfer unit (NTU). Based on particular designs, it was determined that the increment in fluid velocity enhances the heat transfer rate, which in turn decreases the heat transfer irreversibility.


  • Open Access

    Tree Shaped in Channels Parallel and Counter Flow Through Heat Exchanger Heat Transfer and Flow Investigation of Characteristic

    by A. Buğra Çolak, İsak Kotcioğlu Kotcioglu, Mansour Nasiri Khalaji

    In this study, a heat exchanger system capable of working on tree-shaped three-level parallel and counter flow basis was designed and manufactured based on the branched Fractal like flow channel structure. A smiliar phylum of heat exchanger on discs. onto one surface of the lower and upper plates and both surfaces of middle plate, 156 Branched-micro channels with cylindrical sections were opened in three levels symmetrically with each other at different levels and diameters. According to the parallel and counter flow type based open circuit and closed circuit principle, the fluid enters the system at equal thermal capacity ratios from the axial or radial connection points and discharges. In the open circuit operating conditions, the heating water is in the temperature range of 35-45°C and the flow rate is 2,0-4,0 lt / min. Similarly, in the closed circuit operating conditions, the heating water is in temperature range of 45-60°C and the flow rate is 2,0-4,0 lt/ min. During the experimental work, the temperature and hydrodynamic characteristics of the system are controlled through software written in the MATLAB R2013b package program. Experimental and numerical analyzes were carried out using ANSYS-Fluent ready packet programs. In the analysis, in the increasing flow rate, positions of some external and lateral channels are determined as cause of the decrasing in level of velocity. The result, requirement of designation as the bifurcation geometry divides the mass flow rate equally for each level ol branching, is obtained. The results show that increase in level of branches is not important on the fluid channels which includes this kind (fractal) branch channel with tree-shaped. The results also show that, in the branched model heat exchanger, for opened and closed circuits, parallel flow (increasing branching levels, heating unit and cooling unit) is more efficient than the counter flow (increasing branching levels heating unit and decreasing branching level cooling unit) conditions. Keywords: Fractal Theory; Constructal Theory; MATLAB; ANSYS; Tree-Shaped Heat Exchanger; Parallel and Counter Flow; Branching Micro-Channel DOI: 10.17350/HJSE19030000117 Full Text:


  • Design Analysis of Impinging Jet Array Heat Transfer From a Surface With V-Shaped and Convergent–Divergent Ribs by the Taguchi Method

    by Sinan Caliskan, Mansour Nasiri Khalaji, Senol Baskaya, Isak Kotcioglu

    In this work, the effects of the impingement plate geometry, Reynolds number, jet-plate distance-to-jet diameter ratio, and the jet diameter-to-rib height ratio on the impingement jets were investigated using the Taguchi experimental design method. The heat transfer measurements over a surface with V-shaped ribs (V-SR) and convergent-divergent shaped ribs (CD-SR) by a circular impinging jet array were investigated using a thermal infrared camera. Both V-SR and CD-SR configurations, with an angle of 45°, were considered. Both projected and total Nusselt numbers were considered as performance statistics. After the data on each quality characteristic were obtained from the orthogonal arrays, a main effect analysis and analysis of variance (ANOVA) were conducted to determine the parameters that had significant effects on these quality characteristics. The L32 (21 × 43) orthogonal array was selected as an experimental plan for the four parameters. The Taguchi method was applied with an optimization process to reach the maximum heat transfer. Experimental results validated the suitability of the proposed approach. The best heat transfer performance was obtained with the V-SR arrangements.


  • The Efficiency Analysis of a Finned Cross-flow Heat Recovery Unit

    by I. Kotcioglu, A. Cansiz

    A finned convergent-divergent plate-type cross-flow heat recovery unit is manufactured and tested for efficiency analysis. Temperature and pressure drop experiments are conducted with various working conditions of the boiler, fan, preheater, and reheater of the system. Variation of Nusselt number and friction factor with Reynolds number is analyzed. Variation of effectiveness and exergy loss with number of transfer units is calculated and discussed in terms of extant literature. Experimental results indicate that the most important parameter affecting the heat transfer is winglet geometry and fluid velocity. The efficiency can be improved successfully by controlling these parameters for thermal applications.


  • Heat Transfer Properties and Energy-Exergy Efficiency in a Finned Cross-Flow Heat Recovery Unit

    by Isak Kotcioglu, Ahmet Cansiz

    In this study, a cross-flow heat recovery-exchanger system operating with unmixed fluids was manufactured and tested. The thermodynamic analysis of the system was presented via determining the variations of exergy loss with Reynolds number. The analysis also included the effects of convergent and divergent plate-type winglets on heat transfer properties of the designed system. Experimental tests consisted of temperature and pressure drop measurements for the Reynolds numbers (3000 and 12,000) according to the working conditions of the boiler, fan, preheater, and reheater. The effects of inlet conditions of the working fluids on the heat transfer characteristics were correlated via entropy generation number and exergy loss. The variation of the effectiveness with the number of transfer unit of heat recovery unit was calculated and discussed in terms of literature.