Chengyu Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chengyu Xu has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Junye Li
Ministry of Education Key Laboratory for Cross-Scale Micro and Nano Manufacturing, Changchun University of Science and Technology, China
3 shared publications - Chunyu Wang
College of Mechanical and Electrical Engineering, Changchun University of Science and Technology, Changchun 130022, China
2 shared publications - Qingdong Yan
Ministry of Education Key Laboratory for Cross-Scale Micro and Nano Manufacturing Changchun University of Science and Technology, Changchun 130022, China
2 shared publications - Ying Chen
China North Vehicle Research Institute, Beijing 100072, China
2 shared publications Chunyu Wang
Ministry of Education Key Laboratory for Cross-Scale Micro and Nano Manufacturing, Changchun University of Science and Technology, Changchun, China
1 shared publication- Feng Yan
Technical Management Department, Fushun Mechanical Equipment Manufacturing Co., Ltd., Fushun 113006, China
1 shared publication
Latest Publications
- 13 June 2025
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 139 (1-2) , 289-311
Research on quality control technology of magnetorheological ultra-precision machining of calcium fluoride crystal
- 13 June 2025
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 139 (1-2) , 289-311
Research on quality control technology of magnetorheological ultra-precision machining of calcium fluoride crystal
- Open Access
- 16 May 2025
- Published by MDPI AG in Lubricants
- Vol. 13 (5) , 225
Numerical Simulation and Experimental Study on the Role of Jet Angle in Controlling the Flow of Transmission Gears
Gears play an important role in modern machinery and are indispensable transmission components, particularly at high speeds, where lubrication is essential for the reliability and efficiency of the gear unit. In order to study the oil coverage law and heat dissipation mechanism of high-speed rotating meshing gears by injection angle, this paper adopts the moving particle semi-implicit method to establish a high-speed rotating gear lubrication model, study the intrinsic effect of different jet angles on gear lubrication, and build a gear lubrication bench for experimental verification. Numerical simulation found that with an increase in spray angle, the gear surface coverage and heat transfer coefficient of the high-speed rotating transmission gears initially increase and then decrease. They reflect the same lubrication law characteristics. When the injection angle was 90°, the surface coverage and heat transfer coefficient values were at their greatest, resulting in the best spray lubricating effect. According to the experimental results, under the conditions of 0.5 MPa injection pressure and high-speed rotation of the transmission gear with vertical injection, the lubricant covers the largest surface area of the gear and the least power loss. Simultaneously, in our previous study, we experimentally obtained the optimal parameter conditions on the basis of which we derived. The effect of nozzle diameter on jet lubrication was investigated in a previous study, and in this article, the effect of nozzle angle and distance on gear lubrication is investigated; the optimal conditions for high-speed lubrication of gears are the incident distance of 3.5 cm, incident angle of 90°, incident diameter of 1.5 mm, and gear speed of 2000 r/min, and the lubrication effect reaches the best ideal state; reduction in oil loss due to oil injection lubrication and power loss due to different parameters of the lubrication system. Lubrication design provides a theoretical foundation for the transmission system.
- 16 May 2025
- Published by MDPI AG in Lubricants
- Vol. 13 (5) , 225
Open AccessNumerical Simulation and Experimental Study on the Role of Jet Angle in Controlling the Flow of Transmission Gears
Gears play an important role in modern machinery and are indispensable transmission components, particularly at high speeds, where lubrication is essential for the reliability and efficiency of the gear unit. In order to study the oil coverage law and heat dissipation mechanism of high-speed rotating meshing gears by injection angle, this paper adopts the moving particle semi-implicit method to establish a high-speed rotating gear lubrication model, study the intrinsic effect of different jet angles on gear lubrication, and build a gear lubrication bench for experimental verification. Numerical simulation found that with an increase in spray angle, the gear surface coverage and heat transfer coefficient of the high-speed rotating transmission gears initially increase and then decrease. They reflect the same lubrication law characteristics. When the injection angle was 90°, the surface coverage and heat transfer coefficient values were at their greatest, resulting in the best spray lubricating effect. According to the experimental results, under the conditions of 0.5 MPa injection pressure and high-speed rotation of the transmission gear with vertical injection, the lubricant covers the largest surface area of the gear and the least power loss. Simultaneously, in our previous study, we experimentally obtained the optimal parameter conditions on the basis of which we derived. The effect of nozzle diameter on jet lubrication was investigated in a previous study, and in this article, the effect of nozzle angle and distance on gear lubrication is investigated; the optimal conditions for high-speed lubrication of gears are the incident distance of 3.5 cm, incident angle of 90°, incident diameter of 1.5 mm, and gear speed of 2000 r/min, and the lubrication effect reaches the best ideal state; reduction in oil loss due to oil injection lubrication and power loss due to different parameters of the lubrication system. Lubrication design provides a theoretical foundation for the transmission system.
- Open Access
Study on Mechanical Properties and Structural Deformation of [111] Oriented Mg-Li Alloy
Mg-Li alloy is widely used in aerospace and military equipment, but the research on its micromechanical mechanism is still insufficient. In this paper, molecular dynamics simulation is used to analyze the nano-indentation response and mechanical mechanism of single crystal Mg-Li. The deformation and hardness changes of Mg-Li under different loads were studied by load–displacement and hardness–depth curves. At the same time, the dislocation defects and equivalent stress are analyzed to reveal the dislocation formation and stress distribution in the process of deformation. Finally, under the condition of stress relaxation, the mechanical behavior of Mg-Li in the process of nano-indentation was revealed, and the deformation mechanism of Mg-Li alloy was studied.
Open AccessStudy on Mechanical Properties and Structural Deformation of [111] Oriented Mg-Li Alloy
Mg-Li alloy is widely used in aerospace and military equipment, but the research on its micromechanical mechanism is still insufficient. In this paper, molecular dynamics simulation is used to analyze the nano-indentation response and mechanical mechanism of single crystal Mg-Li. The deformation and hardness changes of Mg-Li under different loads were studied by load–displacement and hardness–depth curves. At the same time, the dislocation defects and equivalent stress are analyzed to reveal the dislocation formation and stress distribution in the process of deformation. Finally, under the condition of stress relaxation, the mechanical behavior of Mg-Li in the process of nano-indentation was revealed, and the deformation mechanism of Mg-Li alloy was studied.
- Open Access
- 9 August 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (8) , 1020
Simulation and Experimental Study on Stress Relaxation Response of Polycrystalline γ-TiAl Alloy under Nanoindentation Based on Molecular Dynamics
This study employed nano-indentation technology, molecular dynamics simulation, and experimental investigation to examine the stress relaxation behaviour of a polycrystalline γ-TiAl alloy. The simulation enabled the generation of a load-time curve, the visualisation of internal defect evolution, and the mapping of stress distribution across each grain during the stress relaxation stage. The findings indicate that the load remains stable following an initial decline, thereby elucidating the underlying mechanism of load change during stress relaxation. Furthermore, a nano-indentation test was conducted on the alloy, providing insight into the load variation and stress relaxation behaviour under different loading conditions. By comparing the simulation and experimental results, this study aims to guide the theoretical research and practical application of γ-TiAl alloys.
- 9 August 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (8) , 1020
Open AccessSimulation and Experimental Study on Stress Relaxation Response of Polycrystalline γ-TiAl Alloy under Nanoindentation Based on Molecular Dynamics
This study employed nano-indentation technology, molecular dynamics simulation, and experimental investigation to examine the stress relaxation behaviour of a polycrystalline γ-TiAl alloy. The simulation enabled the generation of a load-time curve, the visualisation of internal defect evolution, and the mapping of stress distribution across each grain during the stress relaxation stage. The findings indicate that the load remains stable following an initial decline, thereby elucidating the underlying mechanism of load change during stress relaxation. Furthermore, a nano-indentation test was conducted on the alloy, providing insight into the load variation and stress relaxation behaviour under different loading conditions. By comparing the simulation and experimental results, this study aims to guide the theoretical research and practical application of γ-TiAl alloys.