Zhibo Geng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhibo Geng has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Ke Xiao
Chongqing University
2 shared publications - Yu Xia
Shanghai Jiao Tong University
2 shared publications - Yun Kong
School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China
2 shared publications - Zsófia Lendek
Department of Automation, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
2 shared publications - Fulei Chu
Tsinghua University
1 shared publication - Hao Shen
School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China
1 shared publication
Latest Publications
- Open Access
- 25 March 2026
- Published by MDPI AG in Lubricants
- Vol. 14 (4) , 140
A Study on the Influence of Bush Surface Waviness and Wear on the Tribo-Dynamic Behavior During the Start-Up Process of Water-Lubricated Bearings
The start-up process of water-lubricated bearings (WLBs) exhibits strong nonlinearity and is highly sensitive to the surface topography of both the bush and the journal. However, due to machining errors and operational wear in practical manufacturing and service, the bush inevitably develops surface waviness and wear, which significantly influence its start-up behavior. This issue is particularly critical in high-speed underwater unmanned vehicles, where lightweight design precludes the use of oil lubrication systems, making WLBs a more economically favorable and reliable alternative. To address this, the present study establishes a start-up tribo-dynamic model that comprehensively incorporates both bush surface waviness and wear to systematically investigate their coupled effects on the tribo-dynamic behavior during WLB start-up. The research findings indicate that axial surface waviness reduces the hydrodynamic effect during the start-up phase. Consequently, a higher rotational speed is needed to generate the necessary hydrodynamic pressure for the WLB to start up successfully. The significance of the influence exerted by circumferential surface waviness on start-up behavior is determined by its frequency number, m. A larger m leads to greater fluctuations in both hydrodynamic pressure and contact pressure. Furthermore, when wear occurs, the amplitude of bush surface waviness mediates the influence of wear depth on start-up performance, thereby modifying the optimal wear depth previously established for smooth bearings. These findings highlight the importance of controlling circumferential waviness frequency during machining and manufacturing processes to optimize WLB start-up reliability and service life.
- 25 March 2026
- Published by MDPI AG in Lubricants
- Vol. 14 (4) , 140
Open AccessA Study on the Influence of Bush Surface Waviness and Wear on the Tribo-Dynamic Behavior During the Start-Up Process of Water-Lubricated Bearings
The start-up process of water-lubricated bearings (WLBs) exhibits strong nonlinearity and is highly sensitive to the surface topography of both the bush and the journal. However, due to machining errors and operational wear in practical manufacturing and service, the bush inevitably develops surface waviness and wear, which significantly influence its start-up behavior. This issue is particularly critical in high-speed underwater unmanned vehicles, where lightweight design precludes the use of oil lubrication systems, making WLBs a more economically favorable and reliable alternative. To address this, the present study establishes a start-up tribo-dynamic model that comprehensively incorporates both bush surface waviness and wear to systematically investigate their coupled effects on the tribo-dynamic behavior during WLB start-up. The research findings indicate that axial surface waviness reduces the hydrodynamic effect during the start-up phase. Consequently, a higher rotational speed is needed to generate the necessary hydrodynamic pressure for the WLB to start up successfully. The significance of the influence exerted by circumferential surface waviness on start-up behavior is determined by its frequency number, m. A larger m leads to greater fluctuations in both hydrodynamic pressure and contact pressure. Furthermore, when wear occurs, the amplitude of bush surface waviness mediates the influence of wear depth on start-up performance, thereby modifying the optimal wear depth previously established for smooth bearings. These findings highlight the importance of controlling circumferential waviness frequency during machining and manufacturing processes to optimize WLB start-up reliability and service life.
- 8 January 2025
- Published by Elsevier in Measurement
- Vol. 246
A new accurate theoretical model for the calculation of limiting current in a limiting current oxygen sensor
- 8 January 2025
- Published by Elsevier in Measurement
- Vol. 246
A new accurate theoretical model for the calculation of limiting current in a limiting current oxygen sensor
- Open Access
Triboelectric Nanogenerator-Embedded Intelligent Self-Aligning Roller Bearing with the Capability of Self-Sensing, Monitoring, and Fault Diagnosis
Monitoring the dynamic behaviors of self-aligning roller bearings (SABs) is vital to guarantee the stability of various mechanical systems. This study presents a novel self-powered, intelligent, and self-aligning roller bearing (I-SAB) with which to monitor rotational speeds and bias angles; it also has an application in fault diagnosis. The designed I-SAB is compactly embedded with a novel sweep-type triboelectric nanogenerator (TENG). The TENG is realized within the proposed I-SAB using a comb–finger electrode pair and a flannelette triboelectric layer. A floating, sweeping, and freestanding mode is utilized, which can prevent collisions and considerably enhance the operational life of the embedded TENG. Experiments are subsequently conducted to optimize the output performance and sensing sensitivity of the proposed I-SAB. The results of a speed-sensing experiment show that the characteristic frequencies of triboelectric current and voltage signals are both perfectly proportional to the rotational speed, indicating that the designed I-SAB has the self-sensing capability for rotational speed. Additionally, as both the bias angle and rotational speed of the SAB increase, the envelope amplitudes of the triboelectric voltage signals generated by the I-SAB rise at a rate of 0.0057 V·deg−1·rpm−1. To further demonstrate the effectiveness of the triboelectric signals emitted from the designed I-SAB in terms of self-powered fault diagnosis, a Multi-Scale Discrimination Network (MSDN), based on the ResNet18 architecture, is proposed in order to classify the various fault conditions of the SAB. Using the triboelectric voltage and current signals emitted from the designed I-SAB as inputs, the proposed MSDN model yields excellent average diagnosis accuracies of 99.8% and 99.1%, respectively, indicating its potential for self-powered fault diagnosis.
Open AccessTriboelectric Nanogenerator-Embedded Intelligent Self-Aligning Roller Bearing with the Capability of Self-Sensing, Monitoring, and Fault Diagnosis
Monitoring the dynamic behaviors of self-aligning roller bearings (SABs) is vital to guarantee the stability of various mechanical systems. This study presents a novel self-powered, intelligent, and self-aligning roller bearing (I-SAB) with which to monitor rotational speeds and bias angles; it also has an application in fault diagnosis. The designed I-SAB is compactly embedded with a novel sweep-type triboelectric nanogenerator (TENG). The TENG is realized within the proposed I-SAB using a comb–finger electrode pair and a flannelette triboelectric layer. A floating, sweeping, and freestanding mode is utilized, which can prevent collisions and considerably enhance the operational life of the embedded TENG. Experiments are subsequently conducted to optimize the output performance and sensing sensitivity of the proposed I-SAB. The results of a speed-sensing experiment show that the characteristic frequencies of triboelectric current and voltage signals are both perfectly proportional to the rotational speed, indicating that the designed I-SAB has the self-sensing capability for rotational speed. Additionally, as both the bias angle and rotational speed of the SAB increase, the envelope amplitudes of the triboelectric voltage signals generated by the I-SAB rise at a rate of 0.0057 V·deg−1·rpm−1. To further demonstrate the effectiveness of the triboelectric signals emitted from the designed I-SAB in terms of self-powered fault diagnosis, a Multi-Scale Discrimination Network (MSDN), based on the ResNet18 architecture, is proposed in order to classify the various fault conditions of the SAB. Using the triboelectric voltage and current signals emitted from the designed I-SAB as inputs, the proposed MSDN model yields excellent average diagnosis accuracies of 99.8% and 99.1%, respectively, indicating its potential for self-powered fault diagnosis.
- 21 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Systems, Man, and Cybernetics: Systems
- Vol. 55 (2) , 1102-1115
Adaptive Fuzzy Control for Stochastic Nonlinear Systems With Nonmonotonic Prescribed Performance and Unknown Control Directions
This article presents an adaptive fuzzy control scheme capable of guaranteeing prescribed performance for stochastic nonlinear systems with unknown control directions. Unlike the majority of existing prescribed performance control schemes, the proposed scheme ensures the independence from initial errors and guarantees controllable overshoot. Moreover, the proposed prescribed function exhibits nonmonotonicity, which can be beneficial in control applications with input constraints. To address the challenge posed by unknown control directions, a novel class of multiple Nussbaum functions is introduced. Compared to the existing single Nussbaum function, the multiple Nussbaum functions can mitigate instability arising from the cancelation of multiple unknown signs. Additionally, to tackle unknown nonlinearities, a single-parameter fuzzy approximator is introduced, aiming to concurrently reduce computational complexity. Furthermore, a novel class of switching threshold event-triggered mechanisms is designed to address issues encountered in existing designs where parameter inequalities impose conservative constraints. The control scheme ensures that the tracking error converges to prescribed asymmetric boundaries with arbitrarily small residuals in a prescribed time, while also guaranteeing that all closed-loop signals are bounded in probability. The effectiveness and superiority of the control scheme are verified by simulation results.
- 21 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Systems, Man, and Cybernetics: Systems
- Vol. 55 (2) , 1102-1115
Adaptive Fuzzy Control for Stochastic Nonlinear Systems With Nonmonotonic Prescribed Performance and Unknown Control Directions
This article presents an adaptive fuzzy control scheme capable of guaranteeing prescribed performance for stochastic nonlinear systems with unknown control directions. Unlike the majority of existing prescribed performance control schemes, the proposed scheme ensures the independence from initial errors and guarantees controllable overshoot. Moreover, the proposed prescribed function exhibits nonmonotonicity, which can be beneficial in control applications with input constraints. To address the challenge posed by unknown control directions, a novel class of multiple Nussbaum functions is introduced. Compared to the existing single Nussbaum function, the multiple Nussbaum functions can mitigate instability arising from the cancelation of multiple unknown signs. Additionally, to tackle unknown nonlinearities, a single-parameter fuzzy approximator is introduced, aiming to concurrently reduce computational complexity. Furthermore, a novel class of switching threshold event-triggered mechanisms is designed to address issues encountered in existing designs where parameter inequalities impose conservative constraints. The control scheme ensures that the tracking error converges to prescribed asymmetric boundaries with arbitrarily small residuals in a prescribed time, while also guaranteeing that all closed-loop signals are bounded in probability. The effectiveness and superiority of the control scheme are verified by simulation results.
- 22 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Fuzzy Systems
- Vol. 32 (8) , 4220-4233
Fixed-Time Fuzzy Vibration Reduction for Stochastic MEMS Gyroscopes With Low Communication Resources
The microelectromechanical system (MEMS) gyroscope is a complex nonlinear system with multiple variables, strong coupling, and susceptibility to stochastic disturbances. This paper presents an adaptive fuzzy control scheme for stochastic MEMS gyroscopes, with the primary objectives of reducing control vibration and achieving high precision prescribed performance tracking with low communication resources within a fixed-time backstepping framework. To address the stochastic disturbances and unknown nonlinear system dynamics, the interval type-3 fuzzy logic system (IT3FLS) is introduced. Additionally, a novel quadratic prescribed performance function (QPPF) is proposed to ensure satisfactory transient and steady-state performance of the system while mitigating initial control vibrations during fast error convergence. Furthermore, an event-triggered mechanism (ETM) is developed using a switching threshold strategy to minimize the communication load without compromising control accuracy. By utilizing the fixedtime command-filtered backstepping design method and newly introduced error-compensating signals, the issue of “explosion of complexity” is effectively resolved, and filtering errors are adequately compensated. The proposed control scheme guarantees that the tracking errors converge to a predefined set of arbitrarily small residuals in probability. In addition, all the closed-loop signals are within a fixed time bounded in probability (FTBIP). The simulation results validate the effectiveness and superiority of the proposed scheme.
- 22 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Fuzzy Systems
- Vol. 32 (8) , 4220-4233
Fixed-Time Fuzzy Vibration Reduction for Stochastic MEMS Gyroscopes With Low Communication Resources
The microelectromechanical system (MEMS) gyroscope is a complex nonlinear system with multiple variables, strong coupling, and susceptibility to stochastic disturbances. This paper presents an adaptive fuzzy control scheme for stochastic MEMS gyroscopes, with the primary objectives of reducing control vibration and achieving high precision prescribed performance tracking with low communication resources within a fixed-time backstepping framework. To address the stochastic disturbances and unknown nonlinear system dynamics, the interval type-3 fuzzy logic system (IT3FLS) is introduced. Additionally, a novel quadratic prescribed performance function (QPPF) is proposed to ensure satisfactory transient and steady-state performance of the system while mitigating initial control vibrations during fast error convergence. Furthermore, an event-triggered mechanism (ETM) is developed using a switching threshold strategy to minimize the communication load without compromising control accuracy. By utilizing the fixedtime command-filtered backstepping design method and newly introduced error-compensating signals, the issue of “explosion of complexity” is effectively resolved, and filtering errors are adequately compensated. The proposed control scheme guarantees that the tracking errors converge to a predefined set of arbitrarily small residuals in probability. In addition, all the closed-loop signals are within a fixed time bounded in probability (FTBIP). The simulation results validate the effectiveness and superiority of the proposed scheme.
- Open Access
- 16 January 2024
- Published by MDPI AG in Lubricants
- Vol. 12 (1) , 25
Nonlinear Dynamic Analysis of a Spur Gear Pair System with Wear Considering the Meshing Position
In this paper, a nonlinear dynamic model of a parallel shaft gear system consisting of two involute spur gears is developed to investigate the coupling effect between the gradual surface wear of gear teeth over time and nonlinear dynamic characteristics. A uniform wear model that accounts for how the volumetric wear of the gear teeth affect their meshing position, backlash, and stiffness is proposed. Additionally, a nonlinear dynamic model with six degrees of freedom is described that considers friction, time-varying gear backlash, and time-varying meshing stiffness. The proposed model significantly changes the mesh stiffness, not only in terms of value but also in terms of contact ratio. Furthermore, the nonlinear dynamic characteristics of the gear system vary significantly. It is found that the gradual wear of gear teeth affects the meshing position and further has a significant impact on the nonlinear dynamic characteristics of the spur gear system. This paper provides a basis for studying the nonlinear dynamic characteristics of the spur gear system as it experiences the gradual wear of teeth over time.
- 16 January 2024
- Published by MDPI AG in Lubricants
- Vol. 12 (1) , 25
Open AccessNonlinear Dynamic Analysis of a Spur Gear Pair System with Wear Considering the Meshing Position
In this paper, a nonlinear dynamic model of a parallel shaft gear system consisting of two involute spur gears is developed to investigate the coupling effect between the gradual surface wear of gear teeth over time and nonlinear dynamic characteristics. A uniform wear model that accounts for how the volumetric wear of the gear teeth affect their meshing position, backlash, and stiffness is proposed. Additionally, a nonlinear dynamic model with six degrees of freedom is described that considers friction, time-varying gear backlash, and time-varying meshing stiffness. The proposed model significantly changes the mesh stiffness, not only in terms of value but also in terms of contact ratio. Furthermore, the nonlinear dynamic characteristics of the gear system vary significantly. It is found that the gradual wear of gear teeth affects the meshing position and further has a significant impact on the nonlinear dynamic characteristics of the spur gear system. This paper provides a basis for studying the nonlinear dynamic characteristics of the spur gear system as it experiences the gradual wear of teeth over time.