Hideki Nishizawa
Research Subjects
Hideki Nishizawa has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
Toru Mano
6 shared publicationsKazuya Anazawa
5 shared publications- Andrea D'AMico
NEC Laboratories America
4 shared publications Koichi Takasugi
4 shared publications- Vittorio Curri
Politecnico di Torino
4 shared publications Yoshiaki Sone
4 shared publications
Latest Publications
- Open Access
- 11 June 2026
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 18 (7) , C49
Leveraging digital twin technologies: all-photonics networks-as-a-service for Data Center Xchange in the era of AI [Invited Tutorial]
This tutorial paper presents a data center exchange (Data Center Xchange, DCX) architecture for all-photonics networks-as-a-service in distributed data center infrastructures, enabling the creation of a virtual large-scale data center by directly interconnecting geographically distributed data centers in metropolitan areas. In contrast to existing vendor-driven optical networking approaches, the proposed architecture adopts an operator-driven and open digital twin paradigm, leveraging cloud-native transponder architectures and open tools/interfaces such as GNPy and CMIS/TAI, and a user–carrier collaborative control framework. In particular, the cloud-native architecture enables operators to flexibly develop, deploy, and manage their own control and automation functions across transponders and controllers using container-based software components. Key requirements for such an architecture in the era of AI are identified: support for low-latency operations, scalability, reliability, and flexibility within a single network architecture; the ability to add new operator-driven automation functionalities based on an open networking approach; and the ability to control and manage remotely deployed transponders connected via access links with unknown physical parameters. We propose a set of technologies that enable digital twin operations for optical networks, including a cloud-native architecture for coherent transceivers, remote transponder control, fast end-to-end optical path provisioning, transceiver-based physical-parameter estimation incorporating digital longitudinal monitoring, and optical line system calibration, demonstrating their feasibility through field validations.
- 11 June 2026
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 18 (7) , C49
Open AccessLeveraging digital twin technologies: all-photonics networks-as-a-service for Data Center Xchange in the era of AI [Invited Tutorial]
This tutorial paper presents a data center exchange (Data Center Xchange, DCX) architecture for all-photonics networks-as-a-service in distributed data center infrastructures, enabling the creation of a virtual large-scale data center by directly interconnecting geographically distributed data centers in metropolitan areas. In contrast to existing vendor-driven optical networking approaches, the proposed architecture adopts an operator-driven and open digital twin paradigm, leveraging cloud-native transponder architectures and open tools/interfaces such as GNPy and CMIS/TAI, and a user–carrier collaborative control framework. In particular, the cloud-native architecture enables operators to flexibly develop, deploy, and manage their own control and automation functions across transponders and controllers using container-based software components. Key requirements for such an architecture in the era of AI are identified: support for low-latency operations, scalability, reliability, and flexibility within a single network architecture; the ability to add new operator-driven automation functionalities based on an open networking approach; and the ability to control and manage remotely deployed transponders connected via access links with unknown physical parameters. We propose a set of technologies that enable digital twin operations for optical networks, including a cloud-native architecture for coherent transceivers, remote transponder control, fast end-to-end optical path provisioning, transceiver-based physical-parameter estimation incorporating digital longitudinal monitoring, and optical line system calibration, demonstrating their feasibility through field validations.
- 19 May 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (11) , 19588-19600
Exact PDL-induced SNR statistics in dual-polarization coherent optical communication systems
We derive the exact probability density function of the signal to noise ratio (SNR) impairment caused by polarization dependent loss (PDL) in coherent optical systems. Using the hinge model for PDL statistics, we construct a sequence of variable transformations that yields the expression of the SNR probability density function by means of a sequence of nested recursive integrals. Monte Carlo simulations validate the analytical formulation assuming realistic PDL levels and link configurations, showing excellent agreement. The model accurately captures SNR variability introduced by cascaded PDL elements and provides a foundation for statistical margin assessment, digital twin modeling, and quality of transmission estimation in flexible, low margin optical networks.
- 19 May 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (11) , 19588-19600
Exact PDL-induced SNR statistics in dual-polarization coherent optical communication systems
We derive the exact probability density function of the signal to noise ratio (SNR) impairment caused by polarization dependent loss (PDL) in coherent optical systems. Using the hinge model for PDL statistics, we construct a sequence of variable transformations that yields the expression of the SNR probability density function by means of a sequence of nested recursive integrals. Monte Carlo simulations validate the analytical formulation assuming realistic PDL levels and link configurations, showing excellent agreement. The model accurately captures SNR variability introduced by cascaded PDL elements and provides a foundation for statistical margin assessment, digital twin modeling, and quality of transmission estimation in flexible, low margin optical networks.
- 1 May 2026
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 18 (9) , D30
GNPy as a benchmark for open and disaggregated optical networks
The evolution toward open and partially disaggregated optical networks has introduced new, to our knowledge, requirements on how transmission performance is evaluated and compared across technologies, vendors, and deployment scenarios. In this context, sound benchmarking practices are essential to ensure that quality-of-transmission (QoT) assessments are reproducible, transparent, and meaningful beyond isolated experimental demonstrations. QoT estimation plays a central role in these practices, as it directly impacts network planning, commissioning, automation, and long-term technology selection in heterogeneous optical infrastructures. This paper discusses benchmarking practices for optical transmission in open networks using the open-source GNPy library as a reference digital model. The contribution of this work lies in formalizing how a transparent, vendor-agnostic QoT estimator can be used as a common benchmarking baseline across research and industry. Representative experimental validations spanning short-reach, multiband, and multi-vendor flex-grid transmission scenarios are reviewed and reframed as benchmarking baselines, establishing evidence-based expectations on achievable accuracy and applicability limits under realistic operating conditions. Finally, the paper illustrates how reference QoT models are employed in industry-facing benchmarking workflows, including closed-loop interactions with standardization bodies, multi-vendor planning and automation, procurement processes, and strategic network evolution toward emerging architectures.
- 1 May 2026
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 18 (9) , D30
GNPy as a benchmark for open and disaggregated optical networks
The evolution toward open and partially disaggregated optical networks has introduced new, to our knowledge, requirements on how transmission performance is evaluated and compared across technologies, vendors, and deployment scenarios. In this context, sound benchmarking practices are essential to ensure that quality-of-transmission (QoT) assessments are reproducible, transparent, and meaningful beyond isolated experimental demonstrations. QoT estimation plays a central role in these practices, as it directly impacts network planning, commissioning, automation, and long-term technology selection in heterogeneous optical infrastructures. This paper discusses benchmarking practices for optical transmission in open networks using the open-source GNPy library as a reference digital model. The contribution of this work lies in formalizing how a transparent, vendor-agnostic QoT estimator can be used as a common benchmarking baseline across research and industry. Representative experimental validations spanning short-reach, multiband, and multi-vendor flex-grid transmission scenarios are reviewed and reframed as benchmarking baselines, establishing evidence-based expectations on achievable accuracy and applicability limits under realistic operating conditions. Finally, the paper illustrates how reference QoT models are employed in industry-facing benchmarking workflows, including closed-loop interactions with standardization bodies, multi-vendor planning and automation, procurement processes, and strategic network evolution toward emerging architectures.
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 7, 12802-12823
Disaggregable Outage-Aware SNR Modeling Under PDL Uncertainty for Optical Network Digital Twins
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 7, 12802-12823
Open AccessDisaggregable Outage-Aware SNR Modeling Under PDL Uncertainty for Optical Network Digital Twins
- 27 May 2025
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 17 (6) , 498
Experimental evaluation of an SDN controller for open optical-circuit-switched networks
Open optical networks have been considered to be important for cost-effectively building and operating networks. Recently, optical-circuit-switches (OCSes) have attracted industry and academia because of their cost efficiency and higher capacity than traditional electrical packet switches and reconfigurable optical add-drop multiplexers (ROADMs). Though the open interfaces and control planes for traditional ROADMs and transponders have been defined by several standard-defining organizations, those of OCSes have not. Considering that several OCSes have already been installed in production datacenter networks and several OCS products are on the market, bringing openness and interoperability into OCS-based networks has become important. Motivated by this fact, this paper investigates a software-defined networking controller for open optical-circuit-switched networks. To this end, we identified the use cases of OCSes and derived the controller requirements for supporting them. We then proposed a multi-vendor (MV) OCS controller framework that satisfies the derived requirements; it was designed to quickly and consistently operate fiber paths upon receiving the operation requests. We validated our controller by implementing it and evaluating its performance on actual MV-OCS networks. It satisfied all the requirements, and fiber paths could be configured within 1.0 s by using our controller.
- 27 May 2025
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 17 (6) , 498
Experimental evaluation of an SDN controller for open optical-circuit-switched networks
Open optical networks have been considered to be important for cost-effectively building and operating networks. Recently, optical-circuit-switches (OCSes) have attracted industry and academia because of their cost efficiency and higher capacity than traditional electrical packet switches and reconfigurable optical add-drop multiplexers (ROADMs). Though the open interfaces and control planes for traditional ROADMs and transponders have been defined by several standard-defining organizations, those of OCSes have not. Considering that several OCSes have already been installed in production datacenter networks and several OCS products are on the market, bringing openness and interoperability into OCS-based networks has become important. Motivated by this fact, this paper investigates a software-defined networking controller for open optical-circuit-switched networks. To this end, we identified the use cases of OCSes and derived the controller requirements for supporting them. We then proposed a multi-vendor (MV) OCS controller framework that satisfies the derived requirements; it was designed to quickly and consistently operate fiber paths upon receiving the operation requests. We validated our controller by implementing it and evaluating its performance on actual MV-OCS networks. It satisfied all the requirements, and fiber paths could be configured within 1.0 s by using our controller.
- 22 August 2024
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 16 (9) , 894-904
Semi-automatic line-system provisioning with an integrated physical-parameter-aware methodology: field verification and operational feasibility
We propose methods and an architecture to conduct measurements and optimize newly installed optical fiber line systems semi-automatically using integrated physics-aware technologies in a data center interconnection (DCI) transmission scenario. We demonstrate, for the first time to our knowledge, digital longitudinal monitoring (DLM) and optical line system (OLS) physical parameter calibration working together in real-time to extract physical link parameters for fast optical fiber line systems provisioning. Our methodology has the following advantages over traditional design: a minimized footprint at user sites, accurate estimation of the necessary optical network characteristics via complementary telemetry technologies, and the capability to conduct all operation work remotely. The last feature is crucial, as it enables remote operation to implement network design settings for immediate response to quality of transmission (QoT) degradation and reversion in the case of unforeseen problems. We successfully performed semi-automatic line system provisioning over field fiber network facilities at Duke University, Durham, North Carolina. The tasks of parameter retrieval, equipment setting optimization, and system setup/provisioning were completed within 1 h. The field operation was supervised by on-duty personnel who could access the system remotely from different time zones. By comparing Q-factor estimates calculated from the extracted link parameters with measured results from 400G transceivers, we confirmed that our methodology has a reduction in the QoT prediction errors ( ±0.3dB ) over existing designs ( ±0.6dB ).
- 22 August 2024
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 16 (9) , 894-904
Semi-automatic line-system provisioning with an integrated physical-parameter-aware methodology: field verification and operational feasibility
We propose methods and an architecture to conduct measurements and optimize newly installed optical fiber line systems semi-automatically using integrated physics-aware technologies in a data center interconnection (DCI) transmission scenario. We demonstrate, for the first time to our knowledge, digital longitudinal monitoring (DLM) and optical line system (OLS) physical parameter calibration working together in real-time to extract physical link parameters for fast optical fiber line systems provisioning. Our methodology has the following advantages over traditional design: a minimized footprint at user sites, accurate estimation of the necessary optical network characteristics via complementary telemetry technologies, and the capability to conduct all operation work remotely. The last feature is crucial, as it enables remote operation to implement network design settings for immediate response to quality of transmission (QoT) degradation and reversion in the case of unforeseen problems. We successfully performed semi-automatic line system provisioning over field fiber network facilities at Duke University, Durham, North Carolina. The tasks of parameter retrieval, equipment setting optimization, and system setup/provisioning were completed within 1 h. The field operation was supervised by on-duty personnel who could access the system remotely from different time zones. By comparing Q-factor estimates calculated from the extracted link parameters with measured results from 400G transceivers, we confirmed that our methodology has a reduction in the QoT prediction errors ( ±0.3dB ) over existing designs ( ±0.6dB ).
- 9 July 2024
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 16 (8) , 788-799
Efficient fiber-inspection and certification method for optical-circuit-switched datacenter networks
Datacenter networks (DCNs) consisting of optical circuit switches (OCSs) have been considered as a promising solution to dramatically improve their transmission capacity, energy efficiency, and communication latency. To scale optical-circuit-switched DCNs (OCS DCNs), hierarchical OCSs with tens of thousands of optical fibers need to be installed, and they should be inspected before starting datacenter operations. Since traditional DCNs consist of electrical-packet switches (EPSs), the condition and cabling of fibers can be inspected easily by probing neighboring EPSs. However, OCS networks cannot be inspected in the same manner because OCSs cannot transmit and receive probe signals. Thus, we have had to attach and detach a light source and power meter (LSPM) to every switch for probing all the fibers, which takes weeks. This paper proposes an efficient method for inspecting and certifying fibers in an entire DCN without repeating LSPM reattachment. Our method is based on (1) theories on quickly estimating the fiber condition on the basis of the intensity of received probe signals, (2) the maximum allowable loss of each fiber derived from the transceiver budget used in operations, and (3) an algorithm that reduces the number of probes needed. The results from an extensive numerical evaluation indicate that our method inspected a DCN with 18,432 fibers in at most a day, whereas a baseline method involving repeated LSPM reattachment would take more than a week. We also confirmed that our method never produced false negatives and false positives under practical network conditions.
- 9 July 2024
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 16 (8) , 788-799
Efficient fiber-inspection and certification method for optical-circuit-switched datacenter networks
Datacenter networks (DCNs) consisting of optical circuit switches (OCSs) have been considered as a promising solution to dramatically improve their transmission capacity, energy efficiency, and communication latency. To scale optical-circuit-switched DCNs (OCS DCNs), hierarchical OCSs with tens of thousands of optical fibers need to be installed, and they should be inspected before starting datacenter operations. Since traditional DCNs consist of electrical-packet switches (EPSs), the condition and cabling of fibers can be inspected easily by probing neighboring EPSs. However, OCS networks cannot be inspected in the same manner because OCSs cannot transmit and receive probe signals. Thus, we have had to attach and detach a light source and power meter (LSPM) to every switch for probing all the fibers, which takes weeks. This paper proposes an efficient method for inspecting and certifying fibers in an entire DCN without repeating LSPM reattachment. Our method is based on (1) theories on quickly estimating the fiber condition on the basis of the intensity of received probe signals, (2) the maximum allowable loss of each fiber derived from the transceiver budget used in operations, and (3) an algorithm that reduces the number of probes needed. The results from an extensive numerical evaluation indicate that our method inspected a DCN with 18,432 fibers in at most a day, whereas a baseline method involving repeated LSPM reattachment would take more than a week. We also confirmed that our method never produced false negatives and false positives under practical network conditions.
- Open Access
Dynamic optical path provisioning for alien access links: architecture, demonstration, and challenges
With the spread of Data Center Interconnect (DCI) and local 5G, there is a growing need for dynamically established connections between customer locations through high-capacity optical links. However, link parameters such as signal power profile and amplifier gains are often unknown and have to be measured by experts, preventing dynamic path provisioning due to the time-consuming manual measurements. Although several techniques for estimating the unknown parameters of such alien access links have been proposed, no work has presented architecture and protocol that drive the estimation techniques to establish an optical path between the customer locations. Our study aims to automatically connect customer-owned transceivers via alien access links with optimal quality of transmission (QoT). We first propose an architecture and protocol for cooperative optical path design between a customer and carrier, utilizing a state-of-the-art technique for estimating link parameters. We then implement the proposed protocol in a software-defined network (SDN) controller and white-box transponders using an open API. The experiments demonstrate that the optical path is dynamically established via alien access links in 137 seconds from the transceiver's cold start. Lastly, we discuss the QoT accuracy obtained with this method and the remaining issues.
Open AccessDynamic optical path provisioning for alien access links: architecture, demonstration, and challenges
With the spread of Data Center Interconnect (DCI) and local 5G, there is a growing need for dynamically established connections between customer locations through high-capacity optical links. However, link parameters such as signal power profile and amplifier gains are often unknown and have to be measured by experts, preventing dynamic path provisioning due to the time-consuming manual measurements. Although several techniques for estimating the unknown parameters of such alien access links have been proposed, no work has presented architecture and protocol that drive the estimation techniques to establish an optical path between the customer locations. Our study aims to automatically connect customer-owned transceivers via alien access links with optimal quality of transmission (QoT). We first propose an architecture and protocol for cooperative optical path design between a customer and carrier, utilizing a state-of-the-art technique for estimating link parameters. We then implement the proposed protocol in a software-defined network (SDN) controller and white-box transponders using an open API. The experiments demonstrate that the optical path is dynamically established via alien access links in 137 seconds from the transceiver's cold start. Lastly, we discuss the QoT accuracy obtained with this method and the remaining issues.
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
10-WDM 64-GBaud PDM-64QAM Transmission over all-Raman amplified 840 km SSMF using Digital Back Propagation
1.2Tbit (2×64GBaud PDM-64QAM) data transmission is successfully demonstrated over 840km SSMF. The characteristics of transmitter and receiver was precisely calibrated and non-linear effect was compensated by digital back propagation in all-Raman amplification configuration by Q-factor improvement of 0.7dB.
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
10-WDM 64-GBaud PDM-64QAM Transmission over all-Raman amplified 840 km SSMF using Digital Back Propagation
1.2Tbit (2×64GBaud PDM-64QAM) data transmission is successfully demonstrated over 840km SSMF. The characteristics of transmitter and receiver was precisely calibrated and non-linear effect was compensated by digital back propagation in all-Raman amplification configuration by Q-factor improvement of 0.7dB.