Gaoxin Lin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gaoxin Lin has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Licheng Sun
Westlake University
6 shared publications - Linqin Wang
Center of Artificial Photosynthesis for Solar Fuels and Department of Chemistry, School of Science and Research Center for Industries of the Future, Westlake University, Hangzhou, China
4 shared publications Wenlong Li
Westlake University
4 shared publicationsAnrui Dong
Westlake University 600 Dunyu Road
3 shared publicationsWen Wu
Westlake University
3 shared publicationsYilong Zhao
Westlake University
3 shared publications
Latest Publications
- 29 August 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (41) , 44033-44045
Interfacial Hydrogen-Bond Chain Engineering via Surface-Immobilized Ammonium Cations for Accelerated Alkaline Hydrogen Evolution
Engineering the electrode–electrolyte interface has emerged as a critical strategy to overcome sluggish kinetics of alkaline hydrogen evolution reaction (HER). However, the dynamic and complex nature of the double electric layer makes mechanistic understanding at the molecular level and rational interfacial regulation highly challenging. Herein, we demonstrate that molecular modification of Ni-doped MoS2 catalyst with a zwitterionic molecule (z-Ni-MoS2) markedly enhances alkaline HER kinetics. In-situ Raman spectroscopy combined with ab initio molecular dynamics (AIMD) simulations reveals that the quaternary ammonium cation reconstructs interfacial water into linear hydrogen-bond chains via electrostatic repulsion of potassium ions from the z-Ni-MoS2 surface. This distinctive interfacial microenvironment enables water molecules within hydrogen-bond chains to directly relay protons to sulfur sites via a Grotthuss-associated mechanism. In contrast to the conventional diffusion-dominated, non-Grotthuss-associated mechanism, this mechanism lowers the water-dissociation barrier and promotes interfacial proton transport, thereby accelerating alkaline HER kinetics. To evaluate device-level applicability, z-Ni-MoS2 was incorporated into an anion exchange membrane water electrolyzer (AEM-WE). The system delivers outstanding performance of 5.21 A cm–2 at 1.8 V and 9.57 A cm–2 at 2 V, 80 °C, surpassing the United States Department of Energy (DOE) 2026 target (3 A cm–2 at 1.8 V). This work provides molecular-level insight for interfacial water restructuring as a design principle for high-performance alkaline HER catalysts.
- 29 August 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (41) , 44033-44045
Interfacial Hydrogen-Bond Chain Engineering via Surface-Immobilized Ammonium Cations for Accelerated Alkaline Hydrogen Evolution
Engineering the electrode–electrolyte interface has emerged as a critical strategy to overcome sluggish kinetics of alkaline hydrogen evolution reaction (HER). However, the dynamic and complex nature of the double electric layer makes mechanistic understanding at the molecular level and rational interfacial regulation highly challenging. Herein, we demonstrate that molecular modification of Ni-doped MoS2 catalyst with a zwitterionic molecule (z-Ni-MoS2) markedly enhances alkaline HER kinetics. In-situ Raman spectroscopy combined with ab initio molecular dynamics (AIMD) simulations reveals that the quaternary ammonium cation reconstructs interfacial water into linear hydrogen-bond chains via electrostatic repulsion of potassium ions from the z-Ni-MoS2 surface. This distinctive interfacial microenvironment enables water molecules within hydrogen-bond chains to directly relay protons to sulfur sites via a Grotthuss-associated mechanism. In contrast to the conventional diffusion-dominated, non-Grotthuss-associated mechanism, this mechanism lowers the water-dissociation barrier and promotes interfacial proton transport, thereby accelerating alkaline HER kinetics. To evaluate device-level applicability, z-Ni-MoS2 was incorporated into an anion exchange membrane water electrolyzer (AEM-WE). The system delivers outstanding performance of 5.21 A cm–2 at 1.8 V and 9.57 A cm–2 at 2 V, 80 °C, surpassing the United States Department of Energy (DOE) 2026 target (3 A cm–2 at 1.8 V). This work provides molecular-level insight for interfacial water restructuring as a design principle for high-performance alkaline HER catalysts.
- 30 July 2026
- Published by Springer Nature in Nature Catalysis
- Vol. 9 (8) , 869-881
Nickel nanoparticles encapsulated inside mesoporous MoO2 for industrially stable anion-exchange membrane water electrolysis
- 30 July 2026
- Published by Springer Nature in Nature Catalysis
- Vol. 9 (8) , 869-881
Nickel nanoparticles encapsulated inside mesoporous MoO2 for industrially stable anion-exchange membrane water electrolysis
- 21 July 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (30) , 9904-9911
Morphology Control of Hydrogen Evolution Reaction Catalyst Promoting H2 Mass Transfer
Gas bubble accumulation during hydrogen evolution reaction (HER) hinders mass transfer and limits ampere-scale performance, making the optimization of electrode microstructures for efficient H2 release a critical challenge. We precisely synthesized NiMo/MoO2-based catalysts in 1D nanorod (1D-NR), 2D nanosheet (2D-NS), and 3D nanosheet-rod complex (3D-SR) structures to identify the optimal structure for enhanced HER mass transfer. The 1D-NR with the open-channel structure and a small adhesive force exhibited the lowest bubble detachment time (200 ± 40 ms) and the lowest potential fluctuation. In an anion exchange membrane water electrolyzer, a 1D-NR-catalyzed device suppressed slug and annular flow, allowing bubble flow to predominantly occupy the central region of the channels at high current. The 1D-NR-catalyzed device achieved 1.87 A cm–2 at 1.8 V, representing 96.8% and 30.8% improvements over the 2D-NS and 3D-SR catalyzed devices, respectively. Moreover, the 1D-NR-catalyzed device showed long-term stability of 1400 h at 1 A cm–2.
- 21 July 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (30) , 9904-9911
Morphology Control of Hydrogen Evolution Reaction Catalyst Promoting H2 Mass Transfer
Gas bubble accumulation during hydrogen evolution reaction (HER) hinders mass transfer and limits ampere-scale performance, making the optimization of electrode microstructures for efficient H2 release a critical challenge. We precisely synthesized NiMo/MoO2-based catalysts in 1D nanorod (1D-NR), 2D nanosheet (2D-NS), and 3D nanosheet-rod complex (3D-SR) structures to identify the optimal structure for enhanced HER mass transfer. The 1D-NR with the open-channel structure and a small adhesive force exhibited the lowest bubble detachment time (200 ± 40 ms) and the lowest potential fluctuation. In an anion exchange membrane water electrolyzer, a 1D-NR-catalyzed device suppressed slug and annular flow, allowing bubble flow to predominantly occupy the central region of the channels at high current. The 1D-NR-catalyzed device achieved 1.87 A cm–2 at 1.8 V, representing 96.8% and 30.8% improvements over the 2D-NS and 3D-SR catalyzed devices, respectively. Moreover, the 1D-NR-catalyzed device showed long-term stability of 1400 h at 1 A cm–2.
- Top Cited PapersOpen Access
- 28 May 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-9
Interlayer-bonded Ni/MoO2 electrocatalyst for efficient hydrogen evolution reaction with stability over 6000 h at 1000 mA cm−2
The mechanical stability of the catalytic electrodes used for hydrogen evolution reactions (HER) is crucial for their industrial applications in anion exchange membrane water electrolysis (AEM-WE). This study develops a corrosion strategy to construct a self-supported electrocatalyst (Int-Ni/MoO2) with high mechanical stability by anchoring the Ni/MoO2 catalytic layer with a dense interlayer of MoO2 nanoparticles. The Int-Ni/MoO2 exhibits a strengthened homostructural interface between the interlayer and catalytic layer, preventing the detachment of the catalyst during ultrasonic treatment. The blade-shaped catalytic layer reduces bubble shock and potential fluctuations at high current densities up to −6000 mA cm−2. As a result, the Int-Ni/MoO2 electrode exhibits a low overpotential of 73.2 ± 14.2 mV and long-term stability for 6000 h at −1000 mA cm−2 in a 1 M KOH solution. The Int-Ni/MoO2 assembled AEM-WE device demonstrates long-term stability at 1000 mA cm−2 for 1000 h with a very low degradation rate of 3.96 µV h−1.
- 28 May 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-9
Top Cited PapersOpen AccessInterlayer-bonded Ni/MoO2 electrocatalyst for efficient hydrogen evolution reaction with stability over 6000 h at 1000 mA cm−2
The mechanical stability of the catalytic electrodes used for hydrogen evolution reactions (HER) is crucial for their industrial applications in anion exchange membrane water electrolysis (AEM-WE). This study develops a corrosion strategy to construct a self-supported electrocatalyst (Int-Ni/MoO2) with high mechanical stability by anchoring the Ni/MoO2 catalytic layer with a dense interlayer of MoO2 nanoparticles. The Int-Ni/MoO2 exhibits a strengthened homostructural interface between the interlayer and catalytic layer, preventing the detachment of the catalyst during ultrasonic treatment. The blade-shaped catalytic layer reduces bubble shock and potential fluctuations at high current densities up to −6000 mA cm−2. As a result, the Int-Ni/MoO2 electrode exhibits a low overpotential of 73.2 ± 14.2 mV and long-term stability for 6000 h at −1000 mA cm−2 in a 1 M KOH solution. The Int-Ni/MoO2 assembled AEM-WE device demonstrates long-term stability at 1000 mA cm−2 for 1000 h with a very low degradation rate of 3.96 µV h−1.
- Top Cited Papers
- 16 May 2025
- Published by Wiley in Advanced Materials
- Vol. 37 (30) , e2507525
An Interlayer Anchored NiMo/MoO2 Electrocatalyst for Hydrogen Evolution Reaction in Anion Exchange Membrane Water Electrolysis at High Current Density
Noble metal‐free electrodes for anion exchange membrane water electrolysis (AEM‐WE) operating at high current densities are critical for sustainable hydrogen production. However, the massive amount of bubbles resulted in insufficient mass transfer and unevenly distributed local stress, which poses a major challenge in designing an efficient and robust hydrogen evolution catalyst. Herein, a facile chemical corrosion method is developed to synthesize an interlayer‐anchored NiMo/MoO2 catalyst on a nickel foam (NF) substrate (NiMo/Int/NF) with high hydrogen evolution activity (overpotential of 80.2 ± 3.53 mV) and durability (stable for 5000 h) at 1000 mA cm−2 in 1 m KOH. The interlayer tightly anchors the catalytic layer to the substrate, providing high compressive strength and strong adhesion to mitigate the bubble shock at a high current density. In situ Raman and X‐ray diffraction analyses reveal that the heterostructural catalytic layer can accelerate the hydrogen evolution reaction with increased local pH and high component utilization. Using NiMo/Int/NF as the cathode, the assembled noble metal‐free AEM‐WE device exhibits a low cell voltage of 1.78 V at 1000 mA cm−2 (significantly lower than that of a Pt/C‐catalyzed cell (1.94 V)) while also showing excellent stability for 3000 h.
- 16 May 2025
- Published by Wiley in Advanced Materials
- Vol. 37 (30) , e2507525
Top Cited PapersAn Interlayer Anchored NiMo/MoO2 Electrocatalyst for Hydrogen Evolution Reaction in Anion Exchange Membrane Water Electrolysis at High Current Density
Noble metal‐free electrodes for anion exchange membrane water electrolysis (AEM‐WE) operating at high current densities are critical for sustainable hydrogen production. However, the massive amount of bubbles resulted in insufficient mass transfer and unevenly distributed local stress, which poses a major challenge in designing an efficient and robust hydrogen evolution catalyst. Herein, a facile chemical corrosion method is developed to synthesize an interlayer‐anchored NiMo/MoO2 catalyst on a nickel foam (NF) substrate (NiMo/Int/NF) with high hydrogen evolution activity (overpotential of 80.2 ± 3.53 mV) and durability (stable for 5000 h) at 1000 mA cm−2 in 1 m KOH. The interlayer tightly anchors the catalytic layer to the substrate, providing high compressive strength and strong adhesion to mitigate the bubble shock at a high current density. In situ Raman and X‐ray diffraction analyses reveal that the heterostructural catalytic layer can accelerate the hydrogen evolution reaction with increased local pH and high component utilization. Using NiMo/Int/NF as the cathode, the assembled noble metal‐free AEM‐WE device exhibits a low cell voltage of 1.78 V at 1000 mA cm−2 (significantly lower than that of a Pt/C‐catalyzed cell (1.94 V)) while also showing excellent stability for 3000 h.
- Top Cited Papers
- 13 August 2024
- Published by Springer Nature in Nature Catalysis
- Vol. 7 (8) , 944-952
Seed-assisted formation of NiFe anode catalysts for anion exchange membrane water electrolysis at industrial-scale current density
- 13 August 2024
- Published by Springer Nature in Nature Catalysis
- Vol. 7 (8) , 944-952
Top Cited PapersSeed-assisted formation of NiFe anode catalysts for anion exchange membrane water electrolysis at industrial-scale current density