Jianming Guo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jianming Guo has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Dong Ni
State Key Laboratory of Industrial Control Technology, Zhejiang University, Hangzhou, China
6 shared publications - Dawei Gao
Zhejiang University
5 shared publications - Kun Ren
Zhejiang University
3 shared publications Mingqiang Geng
College of Integrated Circuits, Zhejiang University 1 , Hangzhou 311200
2 shared publicationsDawei Gao
1 shared publicationDianyu Qi
1 shared publication
Latest Publications
- 22 July 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 44 (5)
Profile evolution and mechanisms in pulsed-bias plasma etching of high-aspect-ratio silicon pillars for wafer-scale metasurface manufacturing
As dielectric metasurfaces move toward CMOS-compatible wafer-scale manufacturing, the plasma-etch transfer of high-aspect-ratio (HAR) silicon pillars on oxide-containing stacks has become a key challenge for process integration. Here, we investigate ∼10:1 Si pillar etching on a SiO2 underlayer in a 12-in. CMOS production-line environment under continuous-wave (CW) and pulsed-bias conditions. Under CW operation, aspect-ratio-dependent etching (also termed RIE)-lag-induced asynchronous etch-front arrival causes isolated pillars to reach the Si/SiO2 interface earlier than dense regions. The resulting local interface-exposure dwell time promotes foot loss, charge-assisted ion deflection, and mask-related profile degradation, leading to notching and collapse. Pulsed bias modifies this late-stage evolution nonmonotonically: 50% duty preserves vertical propagation and suppresses CW-type collapse, whereas lower duty cycles reduce continuous interface exposure but can induce taper or height-deficient profile loss. To rationalize these observations, we develop a mechanism-oriented two-dimensional feature-scale simulator that tracks etch-front timing, local interface-exposure dwell time, bottom-critical dimension evolution, and charge-assisted foot degradation. Guided by these results, a stage-dependent pulsed recipe using 50% duty for the main-etch step and 30% duty for the over-etch step yields substantially improved vertical pillar profiles. This work provides a process-level framework for interpreting HAR silicon pillar etching on oxide-containing stacks, with implications for silicon photonics, metasurface manufacturing, and other CMOS-compatible nanophotonic platforms.
- 22 July 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 44 (5)
Profile evolution and mechanisms in pulsed-bias plasma etching of high-aspect-ratio silicon pillars for wafer-scale metasurface manufacturing
As dielectric metasurfaces move toward CMOS-compatible wafer-scale manufacturing, the plasma-etch transfer of high-aspect-ratio (HAR) silicon pillars on oxide-containing stacks has become a key challenge for process integration. Here, we investigate ∼10:1 Si pillar etching on a SiO2 underlayer in a 12-in. CMOS production-line environment under continuous-wave (CW) and pulsed-bias conditions. Under CW operation, aspect-ratio-dependent etching (also termed RIE)-lag-induced asynchronous etch-front arrival causes isolated pillars to reach the Si/SiO2 interface earlier than dense regions. The resulting local interface-exposure dwell time promotes foot loss, charge-assisted ion deflection, and mask-related profile degradation, leading to notching and collapse. Pulsed bias modifies this late-stage evolution nonmonotonically: 50% duty preserves vertical propagation and suppresses CW-type collapse, whereas lower duty cycles reduce continuous interface exposure but can induce taper or height-deficient profile loss. To rationalize these observations, we develop a mechanism-oriented two-dimensional feature-scale simulator that tracks etch-front timing, local interface-exposure dwell time, bottom-critical dimension evolution, and charge-assisted foot degradation. Guided by these results, a stage-dependent pulsed recipe using 50% duty for the main-etch step and 30% duty for the over-etch step yields substantially improved vertical pillar profiles. This work provides a process-level framework for interpreting HAR silicon pillar etching on oxide-containing stacks, with implications for silicon photonics, metasurface manufacturing, and other CMOS-compatible nanophotonic platforms.
- 27 March 2026
- Published by Elsevier in Materials Science in Semiconductor Processing
- Vol. 209
High-fidelity multilayer etching in virtual fabrication via offline reinforcement learning
- 27 March 2026
- Published by Elsevier in Materials Science in Semiconductor Processing
- Vol. 209
High-fidelity multilayer etching in virtual fabrication via offline reinforcement learning
- 3 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Semiconductor Manufacturing
- Vol. 39 (2) , 248-255
A Transformer-Based Sequence Prediction Architecture for Etch Profile Evolution in Semiconductor Manufacturing
The precise control of three-dimensional feature profiles during plasma etching is a fundamental challenge in nanoscale device fabrication, directly impacting performance and yield. While conventional physics-based simulations can capture the underlying plasma-surface interactions, their prohibitive computational cost limits their use for large-area analysis or rapid process development. To bridge this gap, we introduce EtchFormer, a Transformer-based deep learning framework engineered as a high-speed virtual metrology engine for 3D etch profile prediction. Crucially, the model is trained on a comprehensive dataset generated by the physically-calibrated, multi-scale TCAD simulations described in our methodology. This dataset, comprising over 50,000 time-resolved frames from thousands of etching sequences, embeds the fundamental physics of ion-enhanced etching, surface passivation, and byproduct transport across a wide spectrum of industrial process conditions and complex nanoscale patterns. The EtchFormer framework demonstrates high-fidelity reconstruction of entire etch sequences (Structural Similarity Index > 0.945) and, critically, exhibits robust long-range forecasting capabilities by accurately extrapolating profile evolution beyond the temporal range of the training data. Validated on complex layouts, EtchFormer reduces the prediction time for a complete sequence from hours to subseconds (~0.3 s). This capability provides a foundation for the virtual metrology, enabling the exploration of complex process-pattern dependencies, the prediction of structural anomalies, and the accelerated design and optimization of etching processes.
- 3 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Semiconductor Manufacturing
- Vol. 39 (2) , 248-255
A Transformer-Based Sequence Prediction Architecture for Etch Profile Evolution in Semiconductor Manufacturing
The precise control of three-dimensional feature profiles during plasma etching is a fundamental challenge in nanoscale device fabrication, directly impacting performance and yield. While conventional physics-based simulations can capture the underlying plasma-surface interactions, their prohibitive computational cost limits their use for large-area analysis or rapid process development. To bridge this gap, we introduce EtchFormer, a Transformer-based deep learning framework engineered as a high-speed virtual metrology engine for 3D etch profile prediction. Crucially, the model is trained on a comprehensive dataset generated by the physically-calibrated, multi-scale TCAD simulations described in our methodology. This dataset, comprising over 50,000 time-resolved frames from thousands of etching sequences, embeds the fundamental physics of ion-enhanced etching, surface passivation, and byproduct transport across a wide spectrum of industrial process conditions and complex nanoscale patterns. The EtchFormer framework demonstrates high-fidelity reconstruction of entire etch sequences (Structural Similarity Index > 0.945) and, critically, exhibits robust long-range forecasting capabilities by accurately extrapolating profile evolution beyond the temporal range of the training data. Validated on complex layouts, EtchFormer reduces the prediction time for a complete sequence from hours to subseconds (~0.3 s). This capability provides a foundation for the virtual metrology, enabling the exploration of complex process-pattern dependencies, the prediction of structural anomalies, and the accelerated design and optimization of etching processes.
- 13 June 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 43 (4)
Sequence modeling for predicting three-dimensional plasma etching profiles with deep learning
Three-dimensional plasma etching profile evolution remains a fundamental challenge in semiconductor process engineering, especially given its complexity and computational cost. In this work, we present a data-driven sequence modeling framework for efficient and accurate prediction of three-dimensional plasma etch profiles. A physically calibrated simulation model was used to generate a comprehensive dataset, encompassing over 2000 time-resolved vertical (y–z) profile sequences and 1000 depth-resolved lateral (x–y) pattern clips, covering a wide range of process conditions and layout geometries representative of modern optical proximity correction patterns. Building on this dataset, we develop a Conditional Convolutional Recurrent Neural Network designed to predict the temporal and spatial evolution of etching contours. The model achieves robust predictive accuracy, with an average Structural Similarity Index Measure above 0.94 across predicted frames, and demonstrates consistent performance for both simple and complex feature arrangements. The sequence modeling approach allows for rapid generation of full etch profile sequences, reducing computation time by orders of magnitude compared to traditional simulation workflows. This framework provides an efficient solution for data-driven plasma etch profile prediction, supporting potential applications in process monitoring, virtual metrology, and layout-level risk assessment.
- 13 June 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 43 (4)
Sequence modeling for predicting three-dimensional plasma etching profiles with deep learning
Three-dimensional plasma etching profile evolution remains a fundamental challenge in semiconductor process engineering, especially given its complexity and computational cost. In this work, we present a data-driven sequence modeling framework for efficient and accurate prediction of three-dimensional plasma etch profiles. A physically calibrated simulation model was used to generate a comprehensive dataset, encompassing over 2000 time-resolved vertical (y–z) profile sequences and 1000 depth-resolved lateral (x–y) pattern clips, covering a wide range of process conditions and layout geometries representative of modern optical proximity correction patterns. Building on this dataset, we develop a Conditional Convolutional Recurrent Neural Network designed to predict the temporal and spatial evolution of etching contours. The model achieves robust predictive accuracy, with an average Structural Similarity Index Measure above 0.94 across predicted frames, and demonstrates consistent performance for both simple and complex feature arrangements. The sequence modeling approach allows for rapid generation of full etch profile sequences, reducing computation time by orders of magnitude compared to traditional simulation workflows. This framework provides an efficient solution for data-driven plasma etch profile prediction, supporting potential applications in process monitoring, virtual metrology, and layout-level risk assessment.
- 7 February 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 43 (2)
Attention-enhanced conditional variational autoencoder integrating 3D plasma etching simulation for etching process optimization
Accurate prediction of etching profiles is essential for optimizing semiconductor manufacturing processes. In this work, we present a novel approach to etch process optimization using the EtchAttnCVAE model, which combines conditional variational autoencoders (CVAE) with the attention mechanism to improve the precision of profile predictions. By leveraging three-dimensional plasma etching simulations and real process data, our model captures intricate details of etching profiles, ensuring high structural fidelity under varying conditions. The EtchAttnCVAE model enhances both forward and inverse optimization capabilities. In forward prediction, it accurately generates etching profiles from process conditions, while in inverse optimization, it efficiently identifies optimal recipes from target profiles. This dual capability is part of a comprehensive workflow, which begins with a neural network-based surrogate model for rapid predictions, followed by inverse model calibration and process optimization. Our results demonstrate that the EtchAttnCVAE model significantly outperforms traditional methods by accelerating recipe generation and improving prediction accuracy, making it an ideal solution for smart manufacturing in the semiconductor industry.
- 7 February 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 43 (2)
Attention-enhanced conditional variational autoencoder integrating 3D plasma etching simulation for etching process optimization
Accurate prediction of etching profiles is essential for optimizing semiconductor manufacturing processes. In this work, we present a novel approach to etch process optimization using the EtchAttnCVAE model, which combines conditional variational autoencoders (CVAE) with the attention mechanism to improve the precision of profile predictions. By leveraging three-dimensional plasma etching simulations and real process data, our model captures intricate details of etching profiles, ensuring high structural fidelity under varying conditions. The EtchAttnCVAE model enhances both forward and inverse optimization capabilities. In forward prediction, it accurately generates etching profiles from process conditions, while in inverse optimization, it efficiently identifies optimal recipes from target profiles. This dual capability is part of a comprehensive workflow, which begins with a neural network-based surrogate model for rapid predictions, followed by inverse model calibration and process optimization. Our results demonstrate that the EtchAttnCVAE model significantly outperforms traditional methods by accelerating recipe generation and improving prediction accuracy, making it an ideal solution for smart manufacturing in the semiconductor industry.
- Open Access
- 16 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 127065-127073
Optimizing Plasma Etching: Integrating Precise Three-Dimensional Etching Simulation and Machine Learning for Multi-Objective Optimization
In modern semiconductor manufacturing, optimizing plasma etching processes is key for advancing technology and achieving profitable production. In this study, we propose an efficient process flow to calibrate the etching mechanisms and optimize the etch profile by combining three-dimensional plasma simulations with machine learning (ML). Our proposed workflow speeds up the model calibration process and effectively addresses data scarcity issues by integrating extensive simulation data with TEM and other data sources. We have developed a three-dimensional Cl2/HBr/O2 plasma etching model for shallow trench isolation (STI), which is based on physical and chemical reaction mechanisms and external parameters consistent with actual production requirements, such as gas ratio, time duration, and chamber conditions. Machine learning is employed to tackle both forward and inverse problems. In the forward problem, the model predicts etching profiles under varying process conditions, with accuracy and similarity assessed using multiple criteria, including the structural similarity index (SSIM). Our approach achieves a notable reduction in prediction time, completing forecasts in 0.5 seconds compared to the 6500 CPU seconds required by TCAD. In the inverse problem, the model adjusts physical parameters to match observed results, improving its predictive accuracy. After model calibration, predictions are validated with wafer test outcomes, showing relative errors below 7%, thereby confirming the accuracy and robustness of the model parameters and the effectiveness of the entire process.
- 16 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 127065-127073
Open AccessOptimizing Plasma Etching: Integrating Precise Three-Dimensional Etching Simulation and Machine Learning for Multi-Objective Optimization
In modern semiconductor manufacturing, optimizing plasma etching processes is key for advancing technology and achieving profitable production. In this study, we propose an efficient process flow to calibrate the etching mechanisms and optimize the etch profile by combining three-dimensional plasma simulations with machine learning (ML). Our proposed workflow speeds up the model calibration process and effectively addresses data scarcity issues by integrating extensive simulation data with TEM and other data sources. We have developed a three-dimensional Cl2/HBr/O2 plasma etching model for shallow trench isolation (STI), which is based on physical and chemical reaction mechanisms and external parameters consistent with actual production requirements, such as gas ratio, time duration, and chamber conditions. Machine learning is employed to tackle both forward and inverse problems. In the forward problem, the model predicts etching profiles under varying process conditions, with accuracy and similarity assessed using multiple criteria, including the structural similarity index (SSIM). Our approach achieves a notable reduction in prediction time, completing forecasts in 0.5 seconds compared to the 6500 CPU seconds required by TCAD. In the inverse problem, the model adjusts physical parameters to match observed results, improving its predictive accuracy. After model calibration, predictions are validated with wafer test outcomes, showing relative errors below 7%, thereby confirming the accuracy and robustness of the model parameters and the effectiveness of the entire process.