Shichun Liu
Shichun Liu has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
Haipeng Yuan
School of Computer Science, Fudan University, Shanghai, China
1 shared publicationJiaming Cai
Oil and Gas Technology Institute, PetroChina Changqing Oilfield Company Xi'an People's Republic of China
1 shared publication- Ming Zhang
Department of Otorhinolaryngology, Eye & ENT Hospital, Fudan University, Shanghai, China
1 shared publication Mingwei Zhao
Shandong Key Laboratory of Oilfield Chemistry China University of Petroleum (East China) Qingdao People's Republic of China
1 shared publication- Qi Zhang
Fudan University, China
1 shared publication Shuqin Xiao
Oil and Gas Technology Institute, PetroChina Changqing Oilfield Company Xi'an People's Republic of China
1 shared publication
Latest Publications
- 12 August 2024
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 141 (42)
A novel water‐in‐water emulsion drag reducer with instant solubility and viscosity enhancement for slickwater fracturing fluid
Drag reducers are indispensable components of slickwater fracturing fluids and play a pivotal role in the reconstitution of unconventional oil and gas reservoirs. Water‐in‐water emulsion (W/W) drag reducers have garnered significant attention owing to their rapid dissolution and environmentally benign properties. The solubility and viscosity enhancing ability of W/W drag reducers were further enhanced by synthesizing a novel W/W drag reducer through dispersion polymerization, thereby meeting the requirements of real‐time mixed fracturing construction technology. The solubility, viscosity enhancement, and synthesis state of the synthetic drag reducer were employed as evaluation criteria, whereby the synthetic systems underwent screening and optimization of the synthesis conditions. The final synthetic conditions were determined as follows: the monomer (AM and DMC) had a total mass concentration of 25 wt%, with an AM to DMC molar ratio of 95:5. The dispersion medium (sodium sulfate and sodium chloride) had a total mass concentration of 12 wt%, with a sodium sulfate to sodium chloride mass ratio of 1:2. The dispersion stabilizer PVP K60 had a mass concentration of 7 wt%. The initiator had a total mass concentration of 0.05 wt%, with an ammonium persulfate to sodium bisulfite mass ratio of 1:1. The reaction was conducted at 35°C and a stirring speed of 500 r min−1 for a duration of 8 h. The successful synthesis of the polymer was demonstrated using Fourier transform infrared spectroscopy. Environmental scanning electron microscopy and atomic force microscopy have characterized that the drag reducer has good viscosity enhancement potential. The performance evaluation results show that the solid content of drag reducer was 32.68%, and the residue content was 11.70 mg L−1. The viscosity enhancement rate of 1.3 wt% drag reducer was 93.7%. The dissolution time of 0.1 wt% drag reducer was only 25 s. The drag‐reduction rate of drag reducer reached 73.52%. Experimental results have proved that the drag reducer has the advantages of instant solubility, appreciable viscosity enhancement and drag‐reduction efficiency, fully meeting the real‐time mixing fracturing construction conditions, improving construction efficiency, and reducing construction costs. We expect that this study can broaden the application of W/W drag reducers in unconventional reservoir and provide a theoretical basis for field applications.
- 12 August 2024
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 141 (42)
A novel water‐in‐water emulsion drag reducer with instant solubility and viscosity enhancement for slickwater fracturing fluid
Drag reducers are indispensable components of slickwater fracturing fluids and play a pivotal role in the reconstitution of unconventional oil and gas reservoirs. Water‐in‐water emulsion (W/W) drag reducers have garnered significant attention owing to their rapid dissolution and environmentally benign properties. The solubility and viscosity enhancing ability of W/W drag reducers were further enhanced by synthesizing a novel W/W drag reducer through dispersion polymerization, thereby meeting the requirements of real‐time mixed fracturing construction technology. The solubility, viscosity enhancement, and synthesis state of the synthetic drag reducer were employed as evaluation criteria, whereby the synthetic systems underwent screening and optimization of the synthesis conditions. The final synthetic conditions were determined as follows: the monomer (AM and DMC) had a total mass concentration of 25 wt%, with an AM to DMC molar ratio of 95:5. The dispersion medium (sodium sulfate and sodium chloride) had a total mass concentration of 12 wt%, with a sodium sulfate to sodium chloride mass ratio of 1:2. The dispersion stabilizer PVP K60 had a mass concentration of 7 wt%. The initiator had a total mass concentration of 0.05 wt%, with an ammonium persulfate to sodium bisulfite mass ratio of 1:1. The reaction was conducted at 35°C and a stirring speed of 500 r min−1 for a duration of 8 h. The successful synthesis of the polymer was demonstrated using Fourier transform infrared spectroscopy. Environmental scanning electron microscopy and atomic force microscopy have characterized that the drag reducer has good viscosity enhancement potential. The performance evaluation results show that the solid content of drag reducer was 32.68%, and the residue content was 11.70 mg L−1. The viscosity enhancement rate of 1.3 wt% drag reducer was 93.7%. The dissolution time of 0.1 wt% drag reducer was only 25 s. The drag‐reduction rate of drag reducer reached 73.52%. Experimental results have proved that the drag reducer has the advantages of instant solubility, appreciable viscosity enhancement and drag‐reduction efficiency, fully meeting the real‐time mixing fracturing construction conditions, improving construction efficiency, and reducing construction costs. We expect that this study can broaden the application of W/W drag reducers in unconventional reservoir and provide a theoretical basis for field applications.
- Open Access
- 24 March 2024
- Published by Association for the Advancement of Artificial Intelligence (AAAI) in Proceedings of the AAAI Conference on Artificial Intelligence
- Vol. 38 (17) , 19615-19622
LLMEval: A Preliminary Study on How to Evaluate Large Language Models
Recently, the evaluation of Large Language Models has emerged as a popular area of research. The three crucial questions for LLM evaluation are ``what, where, and how to evaluate''. However, the existing research mainly focuses on the first two questions, which are basically what tasks to give the LLM during testing and what kind of knowledge it should deal with. As for the third question, which is about what standards to use, the types of evaluators, how to score, and how to rank, there hasn't been much discussion. In this paper, we analyze evaluation methods by comparing various criteria with both manual and automatic evaluation, utilizing onsite, crowd-sourcing, public annotators and GPT-4, with different scoring methods and ranking systems. We propose a new dataset, LLMEval and conduct evaluations on 20 LLMs. A total of 2,186 individuals participated, leading to the generation of 243,337 manual annotations and 57,511 automatic evaluation results. We perform comparisons and analyses of different settings and conduct 10 conclusions that can provide some insights for evaluating LLM in the future. The dataset and the results are publicly available at https://github.com/llmeval. The version with the appendix are publicly available at https://arxiv.org/abs/2312.07398.
- 24 March 2024
- Published by Association for the Advancement of Artificial Intelligence (AAAI) in Proceedings of the AAAI Conference on Artificial Intelligence
- Vol. 38 (17) , 19615-19622
Open AccessLLMEval: A Preliminary Study on How to Evaluate Large Language Models
Recently, the evaluation of Large Language Models has emerged as a popular area of research. The three crucial questions for LLM evaluation are ``what, where, and how to evaluate''. However, the existing research mainly focuses on the first two questions, which are basically what tasks to give the LLM during testing and what kind of knowledge it should deal with. As for the third question, which is about what standards to use, the types of evaluators, how to score, and how to rank, there hasn't been much discussion. In this paper, we analyze evaluation methods by comparing various criteria with both manual and automatic evaluation, utilizing onsite, crowd-sourcing, public annotators and GPT-4, with different scoring methods and ranking systems. We propose a new dataset, LLMEval and conduct evaluations on 20 LLMs. A total of 2,186 individuals participated, leading to the generation of 243,337 manual annotations and 57,511 automatic evaluation results. We perform comparisons and analyses of different settings and conduct 10 conclusions that can provide some insights for evaluating LLM in the future. The dataset and the results are publicly available at https://github.com/llmeval. The version with the appendix are publicly available at https://arxiv.org/abs/2312.07398.