Yixin Su
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yixin Su has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Yang Wang
Southwest Jiaotong University
4 shared publications - Momoji Kubo
Institute for Materials Research, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai, Miyagi 980-8577, Japan
2 shared publications - Chen Xiao
State Key Laboratory of Rail Transit Vehicle System, School of Mechanical Engineering, Tribology Research Institute, Southwest Jiaotong University, Chengdu, China
1 shared publication Go Yamamoto
Department of Aerospace Engineering, Tohoku University, 6-6-01 Aoba, Aramaki, Aoba-ku, Sendai 980-8579, Japan
1 shared publication- Hao Tan
College of Chemistry and Materials Science and Guangdong Provincial Key Laboratory of Supramolecular Coordination Chemistry Jinan University Guangzhou China
1 shared publication - Haozhu Wang
Department of Electrical Engineering and Computer Science, University of Michigan, Ann Arbor, MI, USA
1 shared publication
Latest Publications
- 27 October 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (44) , 15370-15376
Atomic-Scale Insights into the Temperature-Dependent Oxidation of SiC and Si3N4 Ceramics: A Molecular Dynamics Study
Thermal oxidation of silicon-based coatings is the focus of attention in their application at high temperature, especially for SiC and Si3N4 coatings. Even though understanding and unveiling the oxidation degree of such silicon-based coatings are important to improve the application value of their outstanding ability at high temperature performance, insights into the oxidation mechanism are unclear at the atomic scale. Here, we investigate the initial oxidation behavior of SiC and Si3N4 with molecular dynamics simulations. Oxidation processes of different polytypes of SiC and Si3N4 with respect to various orientations in an oxygen atmosphere are simulated at typical temperatures ranging from 500 to 1800 K within 200 ps in order to provide further development of new ceramic coatings, which is expected to predict the effect of temperature on the oxidation of SiC and Si3N4. The oxidation of nonpolar 6H-SiC (001) and β-Si3N4 (001) surfaces as typical surfaces is focused on to study the differences between SiC and Si3N4. Our studies demonstrate that the oxidation of Si3N4 is more sensitive to temperature than that of SiC because diffusion of O atoms into β-Si3N4 (001) substrate is more intense than that into 6H-SiC (001).
- 27 October 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (44) , 15370-15376
Atomic-Scale Insights into the Temperature-Dependent Oxidation of SiC and Si3N4 Ceramics: A Molecular Dynamics Study
Thermal oxidation of silicon-based coatings is the focus of attention in their application at high temperature, especially for SiC and Si3N4 coatings. Even though understanding and unveiling the oxidation degree of such silicon-based coatings are important to improve the application value of their outstanding ability at high temperature performance, insights into the oxidation mechanism are unclear at the atomic scale. Here, we investigate the initial oxidation behavior of SiC and Si3N4 with molecular dynamics simulations. Oxidation processes of different polytypes of SiC and Si3N4 with respect to various orientations in an oxygen atmosphere are simulated at typical temperatures ranging from 500 to 1800 K within 200 ps in order to provide further development of new ceramic coatings, which is expected to predict the effect of temperature on the oxidation of SiC and Si3N4. The oxidation of nonpolar 6H-SiC (001) and β-Si3N4 (001) surfaces as typical surfaces is focused on to study the differences between SiC and Si3N4. Our studies demonstrate that the oxidation of Si3N4 is more sensitive to temperature than that of SiC because diffusion of O atoms into β-Si3N4 (001) substrate is more intense than that into 6H-SiC (001).
- Open Access
- 16 December 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (2) , 2303-2313
Orientation-Dependent Reinforcing Mechanisms of SiC/Carbon Nanotube Composites: A Reactive Molecular Dynamics Simulation Study
Carbon nanotubes (CNTs) are effective reinforcing agents in SiC matrices, enhancing their toughness and strength. However, reinforcement is constrained by the complex atomic-scale structural factors of the SiC/CNT composites. Among these, the CNT orientation within the SiC matrix plays a critical role in the performance, though the underlying mechanisms remain unclear. Hence, here, we apply a bond-order-based reactive molecular dynamics simulation method to investigate the mechanical properties and deformation mechanisms of SiC/CNT composites with different CNT orientations. Our research has revealed that CNT orientation affects composites' mechanical properties (including toughness and strength) through two competitive mechanisms: axial stretching and crack bridging. As the angle (θ) between the CNT and tensile direction increases, the axial stretching effect is enhanced, while the crack-bridging effect is weakened. The strength of the SiC/CNT composite is mainly dependent on the axial stretching, hence showing a decreasing trend with θ; whereas the toughness is determined by the competition between the axial stretching and crack-bridging mechanisms. Hence, there is an optimal balance of both mechanisms, resulting in a volcano-type dependence of toughness on θ. Moreover, by accounting for factors such as the SiC crystalline structure, CNT wall number, diameter, aspect ratio, and defects, this study introduces a modified, generalized rule of mixtures. This approach equates the CNT orientation correction factor to the cosine of θ, facilitating the theoretical prediction of the tensile strength in fiber-reinforced ceramic matrix composites.
- 16 December 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (2) , 2303-2313
Open AccessOrientation-Dependent Reinforcing Mechanisms of SiC/Carbon Nanotube Composites: A Reactive Molecular Dynamics Simulation Study
Carbon nanotubes (CNTs) are effective reinforcing agents in SiC matrices, enhancing their toughness and strength. However, reinforcement is constrained by the complex atomic-scale structural factors of the SiC/CNT composites. Among these, the CNT orientation within the SiC matrix plays a critical role in the performance, though the underlying mechanisms remain unclear. Hence, here, we apply a bond-order-based reactive molecular dynamics simulation method to investigate the mechanical properties and deformation mechanisms of SiC/CNT composites with different CNT orientations. Our research has revealed that CNT orientation affects composites' mechanical properties (including toughness and strength) through two competitive mechanisms: axial stretching and crack bridging. As the angle (θ) between the CNT and tensile direction increases, the axial stretching effect is enhanced, while the crack-bridging effect is weakened. The strength of the SiC/CNT composite is mainly dependent on the axial stretching, hence showing a decreasing trend with θ; whereas the toughness is determined by the competition between the axial stretching and crack-bridging mechanisms. Hence, there is an optimal balance of both mechanisms, resulting in a volcano-type dependence of toughness on θ. Moreover, by accounting for factors such as the SiC crystalline structure, CNT wall number, diameter, aspect ratio, and defects, this study introduces a modified, generalized rule of mixtures. This approach equates the CNT orientation correction factor to the cosine of θ, facilitating the theoretical prediction of the tensile strength in fiber-reinforced ceramic matrix composites.
- 25 January 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (5) , 3994-4004
Atomically Dispersed Co–P Moieties via Direct Thermal Exfoliation for Alkaline Hydrogen Electrosynthesis
The development of highly active and stable cathodes in alkaline solutions is crucial for promoting the commercialization of anion exchange membrane (AEM) electrolyzers, yet it remains a significant challenge. Herein, we synthesized atomically dispersed CoP4 moieties (CoP4-SSC) immobilized on ultrathin carbon nanosheets via a phosphidation exfoliation strategy at medium temperature. The thermodynamic formation process of the Co-P moieties was elucidated using X-ray absorption spectroscopy (XAS) and theoretical calculations. Remarkably, the resulting CoP4-SSC electrocatalyst exhibited outstanding activity for alkaline hydrogen evolution, with a low overpotential of 52 mV at 10 mA cm-2 and a turnover frequency of up to 23.83 s-1. Moreover, the AEM electrolyzer fabricated with CoP4-SSC achieved a current density of 1 A cm-2 under an applied voltage of only 1.94 V, showing negligible degradation after 500 h of continuous electrocatalysis. A series of operando characterizations and density functional theory calculations revealed that the atomically dispersed Co-P moieties formed a nanointerface of [P-*H···H2O*-Co], which facilitates water dissociation during the Volmer-Heyrovsky pathway.
- 25 January 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (5) , 3994-4004
Atomically Dispersed Co–P Moieties via Direct Thermal Exfoliation for Alkaline Hydrogen Electrosynthesis
The development of highly active and stable cathodes in alkaline solutions is crucial for promoting the commercialization of anion exchange membrane (AEM) electrolyzers, yet it remains a significant challenge. Herein, we synthesized atomically dispersed CoP4 moieties (CoP4-SSC) immobilized on ultrathin carbon nanosheets via a phosphidation exfoliation strategy at medium temperature. The thermodynamic formation process of the Co-P moieties was elucidated using X-ray absorption spectroscopy (XAS) and theoretical calculations. Remarkably, the resulting CoP4-SSC electrocatalyst exhibited outstanding activity for alkaline hydrogen evolution, with a low overpotential of 52 mV at 10 mA cm-2 and a turnover frequency of up to 23.83 s-1. Moreover, the AEM electrolyzer fabricated with CoP4-SSC achieved a current density of 1 A cm-2 under an applied voltage of only 1.94 V, showing negligible degradation after 500 h of continuous electrocatalysis. A series of operando characterizations and density functional theory calculations revealed that the atomically dispersed Co-P moieties formed a nanointerface of [P-*H···H2O*-Co], which facilitates water dissociation during the Volmer-Heyrovsky pathway.
- 22 August 2024
- Published by Elsevier in Ceramics International
- Vol. 51 (10) , 12323-12329
External stress switching water corrosion behavior of SiC
- 22 August 2024
- Published by Elsevier in Ceramics International
- Vol. 51 (10) , 12323-12329
External stress switching water corrosion behavior of SiC