TKTimea Kovács

Timea Kovács

*This is an algorithmically generated author record based on publicly available information.

Timea Kovács has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Carbonate-rich Sandstone Reactivity to Supercritical CO₂ and Brine: A Case Study from the Guadalquivir Basin, Spain

    by Berta Ordóñez-Casado, Santiago Ledesma, José Mediato, Timea Kóvacs, Darío Chinchilla, Luis González-Menéndez, Edgar Berrezueta

    This study investigates mineralogical and geochemical alterations at the matrix scale in carbonate-rich sandstone exposed to supercritical CO₂ (SC-CO₂) and formation brine. Batch experiments were conducted under reservoir conditions (≈8 MPa, 333ºK) to simulate the early stages of CO₂ injection in a deep sedimentary formation of the Guadalquivir Basin (southern Spain).Rock samples were analysed before and after exposure using scanning electron microscopy (SEM) with microanalysis, X-ray fluorescence (XRF), and X-ray diffraction (XRD). Complementarily, chemical analyses of the brine before and after the experiments were performed. The interaction with CO₂-rich brine caused a marked pH decrease, leading to carbonate dissolution and minor alteration of clay minerals. The Ca concentration in the brine increased by about 300%, confirms active carbonate dissolution driven by CO₂-induced acidification. These reactions, together with particle detachment and micro-scale pore modification, indicate dynamic fluid-rock interactions within the calcarenite matrix.The results show up that the studied reservoir rocks maintain overall structural integrity under CO₂-rich conditions while undergoing measurable geochemical alteration. This experimental framework provides a reproducible approach to evaluate mineral reactivity and textural evolution in carbonate-rich sandstone reservoirs, offering relevant insights to the design and assessment of CO₂ sequestration projects in comparable geological settings.This research was conducted within the UNDERGY Project (Ref. MIG-20211018), funded by the Programa Misiones CDTI 2021 of the Spanish Ministry of Science and Innovation and the Next Generation EU Fund.


  • Open Access

    CO2 storage potential of contourite channels – Laboratory studies on geochemical reactions

    by Edgar Berrezueta, Timea Kovács, Berta Ordóñez-Casado, Estefanía Llave, Beatriz Benjumea, Paula Canteli, Jose Mediato, Javier Hernández-Molina, Wouter de Weger

    Contourite sandstones exhibit high lateral continuity, moderate to high porosity (depending on diagenetic overprint), and are typically overlain by fine-grained marls, making them promising candidates for subsurface CO₂ storage. This study investigates contourite channel deposits of late Miocene age that outcrop in the Rifian Corridor (northern Morocco). A fine-grained, bioclastic–siliciclastic sandstone and a medium- to coarse-grained sand representing potential reservoir materials were selected for controlled CO₂–rock interaction experiments.CO₂ exposure tests were conducted in a batch reactor at 8 MPa and 40 °C for 30 days. Textural and pore-space changes were assessed through comparative SEM imaging, and bulk-rock and brine chemical compositions were analysed before and after exposure. The first reservoir sample experienced only minor dissolution features and limited particle detachment. In contrast, the fine-grained reservoir candidate underwent pronounced physical disintegration during CO₂ exposure. Chemical alteration was modest in both lithologies, expressed mainly as slight increases in dissolved ion concentrations in the brines.These results highlight contrasting mechanical responses of contourite channel facies to CO₂ exposure and underscore the importance of lithological variability when evaluating contourite systems for CO₂ storage applications.This research was conducted within the ALGEMAR Project (Ref. PID2021-123825OB-I00), funded by the Plan Nacional of Spanish Ministry of Science and Innovation

  • Open Access

    Salt rock exposure to hydrogen: evolution of mineralogical, pore-system, and elastic properties

    by Sara Roces, Timea Kovács, Carolina Díaz, Fabián Suárez-García, Berta Ordoñez-Casado, Sergio Llana-Fúnez, Edgar Berrezueta

    As global decarbonization efforts accelerate, hydrogen (H2) is emerging as a key energy carrier in the transition toward a low-carbon economy. Storing surplus energy is essential to mitigate the intermittency of renewable sources, and underground hydrogen storage (UHS) has therefore attracted growing interest as a cost-effective and scalable solution.This study investigates the evolution of mineralogical, pore system, and elastic properties (Young’s modulus and Poisson’s ratio) of salt rocks from deep evaporitic deposits in the Ebro Basin (Spain), exposed to hydrogen in an autoclave under controlled batch conditions (4.5 MPa, 30 ºC, 1 cycle of 30 days). Samples were characterized before and after exposure using optical microscopy (OpM), digital image analysis (DIA), scanning electron microscopy (SEM), and P- and S- wave velocity measurements. The combined use of these techniques provides a comprehensive approach to assess the effects of hydrogen on rock properties.The samples are predominantly composed of white-grey halite (NaCl), with minor impurities of celestine (SrSO4), anhydrite (CaSO4), sylvite (KCl), and silicates. Following hydrogen exposure, the samples were re-evaluated to examine potential microstructural and physical modifications, as well as the behaviour of the impurity phases under the imposed experimental conditions. These preliminary findings provide a basis for discussing hydrogen-rock interactions in evaporitic formations and their relevance for assessing salt deposits as potential reservoirs for underground hydrogen storage (UHS)The research was conducted within the Project PIEMAX-GEO4TREE and the Format-GEO collaboration network (Ref. LINCGLOBAL 25008).

  • Open Access

    Reactivity of Natural Rock Salts of Different Genesis under Underground Hydrogen Storage Conditions

    by Timea Kovács, José Mediato, Berta Ordóñez, Begoña Del Moral, Sara Roces, Edgar Berrezueta

    Hydrogen energy storage in geological formations is increasingly regarded as a key component of a future low-carbon energy system. Among potential reservoir rocks, salt formations are particularly attractive due to their extremely low permeability, low chemical reactivity, and self-healing behaviour, all of which favour long-term storage integrity. However, natural salt deposits differ in genesis, texture, and impurity content, which may influence their geochemical response to underground hydrogen storage (UHS) conditions.This study compares the chemical–mineralogical reactivity of rock salt formations of different origins when exposed to hydrogen. Three salt types were studied: the Oligocene Barbastro Formation (Ebro Basin, Spain), the Triassic Atauri Formation (Basque-Cantabrian Basin, Spain), and a commercially available Himalaya salt. Owing to their distinct depositional environments and post-depositional histories, these materials exhibit subtle differences in texture and mineralogical composition. Samples were exposed to hydrogen gas under representative UHS conditions in a high-pressure vessel (p = 10 MPa, T = 60 °C) for 30 days under batch conditions. Pre- and post-exposure characterisation was performed using X-ray diffraction and scanning electron microscopy to assess potential mineralogical and textural changes.The results indicate that all three salt types undergo only minor alterations under the investigated conditions and timescale, confirming the overall chemical stability of halite in a hydrogen storage context. The only notable differences in reactivity are associated with the presence of gypsum as an accessory phase, which locally influences mineralogical responses. These findings support the suitability of a wide range of natural salt formations for underground hydrogen storage, while highlighting the importance of impurity phases in site-specific assessments.The research was conducted within the Project UES365, the Project H2Salts and the Format-GEO collaboration network (LINCGLOBAL 25008).References:Kovács, T., Mediato, J., Ordóñez, B., Garcia-Mancha, N., Santolaria, P., Calvín, P., Sanchez Guzman, J., Gracia, J., Roces, S., Mata Campos, P., and Berrezueta, E.: Preliminary laboratory studies on hydrogen storage in a salt cavern of the Eocene Barbastro Formation, Southern Pyrenees, Spain, Adv. Geosci., 67, 15–24, https://doi.org/10.5194/adgeo-67-15-2025, 2025.

  • Open Access

    Preliminary laboratory studies on hydrogen storage in a salt cavern of the Eocene Barbastro Formation, Southern Pyrenees, Spain

    by Timea Kovács, José Mediato, Berta Ordóñez, Nuria Garcia-Mancha, Pablo Santolaria, Pablo Calvín, José Sanchez Guzman, Jesús Gracia, Sara Roces, Pilar Mata Campos, et al.

    Underground hydrogen storage (UHS) is emerging as a promising tool for managing surplus energy derived from renewable energy sources. Rock salt (halite) formations, particularly solution-mined salt caverns, offer a secure and efficient storage medium due to their low permeability, self-healing properties, and chemical stability. Laboratory experiments simulating reservoir-like conditions are essential for reducing uncertainties surrounding hydrogen–rock interactions prior to large-scale deployment. This study investigates the response of rock salt to hydrogen exposure under controlled conditions (10 MPa, 60 °C, 30 d) in an autoclave. Two samples from the Eocene Barbastro Formation (Southern Pyrenees), recovered from a deep borehole within a potential salt cavern-type storage site, were tested. The halite samples included impurities such as anhydrite, quartz, feldspars, dolomite, calcite, and phyllosilicates, allowing assessment of non-halite phase reactivity also. Results indicate no significant mineralogical changes after hydrogen exposure. Observed alterations were minor and limited to localised halite recrystallization, slight particle detachment, and occasional chloride precipitation. These findings suggest an overall mineralogical stability of the salt matrix and impurities under the tested conditions and scales. By improving our understanding of hydrogen–rock interactions in evaporitic settings, this study contributes to ongoing efforts to develop safe, science-based solutions for underground hydrogen storage in salt caverns.


  • Open Access

    Preliminary Laboratory Studies on Hydrogen Storage in a Salt Cavern of the Eocene Barbastro Formation, Southern Pyrenees, Spain

    by Timea Kovács, José Mediato, Berta Ordóñez, Nuria Garcia, Emilio Pueyo, José Sanchez Guzman, Jesús Gracia, Edgar Berrezueta

    The transition to a greener economy requires scalable, reliable, and efficient energy storage solutions. Hydrogen (H2), a key component of future renewable energy systems, must be stored in gigaton-scale quantities to balance supply and demand globally. Underground hydrogen storage (UHS) in salt rock caverns is emerging as the most promising solution due to the exceptional properties of rock salt (halite), such as low permeability, self-healing capacity, and geochemical stability. However, significant scientific and technological challenges remain, requiring further study to ensure the safe and efficient deployment of this technology (Berrezueta et al., 2024).Among these challenges, the geomechanical and geochemical evolution of rock salt during cyclic H2 injection and extraction requires further knowledge to address potential integrity problems of the reservoir. Key uncertainties arise from the complex interplay of heterogeneous mineralogy, variable brine compositions, and the dynamic temperature and pressure conditions within the reservoir. Addressing these uncertainties begins with the development of a robust laboratory testing protocol to simulate and analyze the interaction of hydrogen within rock salt under reservoir-like conditions.This study presents experimental data from an autoclave setup designed to replicate reservoir conditions of pressure and temperature. Samples of the Eocene Barbastro Fm. (Southern Pyrenees) were obtained from a deep borehole drilled in a salt structure considered for hydrogen storage. The experiments using pure halite samples and halite with various impurities provide insights into the reactivity of non-halite phases and their impact on the properties of the rock salt. The findings contribute to addressing critical knowledge gaps and improving the safety and reliability of underground hydrogen storage in salt caverns. By advancing our understanding of the processes governing UHS in salt formations, this research supports the development of robust, science-based solutions for the global energy transition.This work is funded by the Project UES365 of the Convocatoria Misiones-CDTI (Spain).References:Berrezueta, E.; Kovács, T.; Herrera-Franco, G.; Caicedo-Potosí, J.; Jaya-Montalvo, M.; Ordóñez-Casado, B.; Carrión-Mero, P.; Carneiro, J. Laboratory Studies on Underground H2 Storage: Bibliometric Analysis and Review of Current Knowledge. Appl. Sci. 2024, 14, 11286. https://doi.org/10.3390/app14231128

  • Open Access

    Geological Storage of CO2 and H2: A Comparative Bibliometric Analysis of Global Challenges and Laboratory Advances.

    by Edgar Berrezueta, Timea Kovacs, Jhon Caicedo-Potosí, Julio Carneiro, Berta Ordóñez-Casado, Diego Baragaño, Paul Carrión, Sara Roces, Jose Mediato

    Underground gas storage is a cornerstone technology for addressing climate challenges and advancing clean energy transitions. By managing greenhouse gases and enhancing energy system resilience, it supports global sustainability goals. This study presents a comparative bibliometric analysis of geological storage research for CO2 (Berrezueta et al., 2023) and H2 (Berrezueta et al., 2024), focusing on contributions published in Scopus and Web of Science databases up to 2024 (updated January 6, 2025).For CO₂ storage, 16,392 contributions were identified, with 5,870 addressing laboratory-scale experiments. Between 2001 and 2012, scientific output surged significantly. Key themes include pore structure (0.48%), residual trapping (0.62%), and hydrogen-related studies (0.27%). Sedimentary rocks dominate laboratory investigations (22.10%), while basaltic formations are underexplored (1.10%). Laboratory experimentation and numerical modeling are critical for understanding injection mechanisms, risk analysis, and storage dynamics.Hydrogen storage research (2,390 contributions)) has grown exponentially since 2015. This period represents 85.26% of total publications in this field. Focus areas include physicochemical interactions with geological formations, optimization of storage cycles in salt caverns (11.17%) and porous reservoirs (23.67%), and hydrogen’s integration as a clean energy vector. Experimental studies (42.74%) emphasize replicating real-world conditions to improve system reliability. Both fields highlight the importance of experimental research for advancing knowledge on reservoir dynamics, economic feasibility, and storage capacity. Shared methodologies and complementary innovations underline the potential for synergy between CO₂ and H₂ storage. These findings call for interdisciplinary innovation and international collaboration to address technical challenges and accelerate the deployment of geological gas storage technologies.This work was supported by national funds through the Undergy project (MIG-20211018), H2Salt project (PR-H2CVAL4-C1-2022-0072) and the CARBres Project (RTI2018-093613-B-100). Berrezueta, E.; Kovacs, T.; Herrera-Franco, G.; Mora-Frank, C.; Caicedo-Potosí, J.; Carrion-Mero, P.; Carneiro, J. Laboratory Studies on CO2-Brine-Rock Interaction: An Analysis of Research Trends and Current Knowledge. Int. J. Greenh. Gas Control 2023, 123, 103842, doi:10.1016/j.ijggc.2023.103842. Berrezueta, E.; Kovacs, T.; Herrera-Franco, G.; Caicedo-Potosí, J.; Jaya, M.; Ordóñez-Casado, B.; Carrion-Mero, P.; Carneiro, J. Laboratory Studies on Underground H2 Storge. Bibliometric Analysis and Review of Currant Knowledge. Applied Sciences 2024, 14 (23), 11286, doi:10.3390/app142311286.

  • Open Access

    Mineralogical and porous system evolution of reservoir and seal rocks: differences between wet and dry conditions

    by Sara Roces, Paula Fernández-Canteli, Berta Ordóñez, Timea Kovacs, Jose Mediato, Diego Baragaño, Edgar Berrezueta

    Carbon capture, utilization and storage (CCUS) is a pivotal technology for reducing atmospheric CO2 and mitigating global warming to 1.5–2ºC. Deep geological storage plays a crucial role in this strategy, requiring a thorough understanding of the reservoir and seal rock properties before gas injection. Laboratory experiments simulating different conditions are essential to analyze how trapping mechanisms evolve over time.This study examines the mineralogical and porous system evolution of detrital rocks from the Ebro Basin in Spain when exposed to dry CO2 and CO2-rich brine. Sandstones from the Lopin structure were subjected to supercritical CO2 in an autoclave under controlled batch conditions (8 MPa, 40ºC, 30 days). The samples were analyzed using optical microscopy, digital image analysis, and scanning electron microscopy to assess structural and compositional changes.The results demonstrate striking differences between the two experimental conditions. Exposure to CO2-rich brine triggers significant grain detachment, mineral dissolution, and increased porosity, reflecting the high chemical reactivity of the system in the presence of fluids. Conversely, exposure to dry supercritical CO2 results in negligible changes, as the absence of fluids inhibits chemical reactions. These findings emphasize the critical role of fluid interactions and extended timescales in enhancing the security and efficiency of long-term CO2 storage.Ordoñez-Casado, B.; Mediato, J.; Kovacs, T.; Martínez-Martínez, J.; Fernández-Canteli, P., González-Menéndez, L.; Roces, S.; Caicedo-Potosí, J.; Berrezueta, E., Experimental geochemical assessment of a seal-reservoir system exposed to supercritical CO2: A case study from the Ebro Basin, Spain. International Journal of Greenhouse Gas Control 2024, 137, 104233. 10.1016/j.ijggc.2024.104233

  • Open Access

    Impact of PVC microplastics on phytoremediation of As and Hg polluted soils using Betula pubescens

    by Diego Baragaño, Salvador Sánchez, Edgar Berrezueta, Elena Rodríguez, Aida González, Timea Kovacs, Maria Antonia López-Antón

    Arsenic (As) and mercury (Hg) contamination in the Asturias region, northern Spain, represents a significant environmental issue that has been extensively studied in recent decades. Mining and industrial activities, particularly those associated with Hg mining, as well as coal mining and iron or zinc metallurgical industries, have profoundly impacted the environment, as evidenced by paleoenvironmental records such as peat bogs. These pollution phenomena affect various environmental compartments, including soil. To mitigate the negative impact of these two highly toxic and carcinogenic pollutants in soils, phytoremediation technology has been developed using Betula pubescens (birch), including field experiments in different polluted sites along the region.In recent years various activities in the region have also led to the release of another type of contaminant classified as emerging: microplastics. Studies conducted in the area have revealed their presence in several environmental compartments, including marine sediments. Notably, microplastics are increasingly detected in soils, but their implications remain unclear. In fact, their interaction with other contaminants in complex mixtures is even less understood.This study aimed to evaluate the impact of polyvinyl chloride (PVC) microplastics on soils contaminated with As and Hg. PVC, one of the most abundant polymers, poses a potential risk of interaction with Hg due to its Cl content. To this end, an experimental plot was established in a polluted soil under controlled conditions, and a dose of 1% of PVC microplastics was added. Phytoremediation of the soil was then performed using birch, with a control plot set up without the presence of microplastics. After two and eight months, sampling of the roots, leaves, and soil was conducted. The samples were analyzed to determine their As and Hg content, assessing the differences in pollutants accumulation in plants. Significant differences were observed between treatments, indicating that the presence of microplastics influenced the accumulation of As and Hg in plants. The presence of Cl in PVC microplastics may be a key factor in their interaction with Hg, thus, to elucidate this interaction, thermal programmed desorption of Hg (Hg-TPD) coupled with microscopic analysis of microplastics extracted from the soil will be employed, enabling a better understanding of the interactions between these two contaminants. This information is critical for evaluating their effects on the soil-plant system and the implications for the feasibility of phytoremediation techniques.This work was supported by the Ministerio de Economía y Competitividad (MINECO, Spain) under the project I+D+i PID2020-113558RB-C43 (MCIN/AEI/10.13039/501100011033).

  • Open Access

    Preliminary proposal for an experimental method to measure erosion susceptibility of heritage stones

    by Javier Martínez-Martínez, Edgar Berrezueta, David Benavente, Timea Kóvacs

    Rock erodibility is an intrinsic property defined as the vulnerability of a rock to erosion (Martínez-Martínez et al., 2024; doi: 10.1201/9781003429234-177). Intuitively, erodibility is a key concept in cultural heritage conservation, especially in studies concerning the exposure of building materials to wind, rain, hail, and human activity. However, research on its implications for heritage conservation remains scarce.Abrasion resistance of rocks is a property routinely measured in geomechanical laboratories and it offers a practical approach to assessing the erosion susceptibility of the material. Two standardized methods, the Böhme abrasion test and the Wide Wheel Abrasion test, are widely used to evaluate abrasion resistance in dimension stones. However, these methods require both large and numerous samples, rendering them unsuitable for cultural heritage studies, where sampling is severely limited. To overcome this limitation, a modified version of the Böhme abrasion test is proposed. This adaption uses a plate grinding machine commonly employed for preparing rock thin sections, making the procedure widely accessible in geoscience laboratories.The standardized Böhme Abrasion test requires cubic samples of 71 mm size, place on a grinding plate and subjected to an abrasive load of 294N for 16 cycles of 22 turns each. Wear is calculated from the loss in volume and weight. In contrast, the modified procedure uses smaller prismatic samples (20×30×30 mm) and a plate grinding machine operating at 30 cycles per minute under a load of 0.02 N/mm². Sample dimensions and weight are measured at the beginning of the test. Each sample is abraded for 15 minutes on two perpendicular surfaces, and the final dried weight is recorded (Martínez-Martínez et al., 2017; doi: 10.1016/j.buildenv.2017.05.034). Material loss is quantified as the modified Böhme Abrasion Loss (mBAL), calculated using the equationmBAL = ΔV = Δm/ρbwhere ΔV is the volume loss (in mm3); Δm is the mass difference (in g); and ρb is the bulk density of the rock.This modified procedure was validated using a variety of commercial dimension stones, including limestones, marbles, travertines, tuffs, calcarenites, calcirrudites, sandstones, quartzites and slates. Results where compared to those obtained with the standardized Wide Wheel Abrasion test on the same rock types. A strong correlation (R2=0.87) was observed between the two methods, expressed by the equationmBAL = 8.9 Tww – 86.5where Tww the wear trace measured in the Wide Wheel Abrasion Test.This modified approach offers a viable solution for assessing erosion susceptibility in heritage contexts, enabling reliable quantification with minimal material requirements. It offers a valuable tool for developing effective conservation strategies for cultural heritage.This work was supported by grant numbers PID2020-116896RB-C21 and PID2020-116896RB-C22 funded by MCIN/AEI/ 10.13039/501100011033