Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Muzammil Hussain has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Molecularly Modified Quinoxaline-Based Unfused NonFullerene Acceptors for Efficient and Stable Organic Photovoltaics

    by Muzammil Hussain, Hira Naz, Zobia Irshad, Riaz Hussain, Hany W. Darwish, Mahmood Ahmed, Fakhar Hussain, Fatiqa Zafar, Muhammad Adnan

    Unfused nonfullerene acceptors (NFAs) have emerged as promising candidates for organic photovoltaics due to their inherent thermal stability, streamlined synthetic accessibility and capacity for high power conversion efficiency. In this study, we report the rational design of a series of W-shaped, fullerene-free NFAs based on a quinoxaline core, chosen for its inherently low electron density. A consistent central electron-withdrawing moiety, 2-(5,6-dichloro-2-methylene-3-oxo-2,3-dihydro-1H-inden-1-ylidene) malononitrile, is employed across all molecules to investigate the effect of terminal group modifications on optical, optoelectronic and photovoltaic behavior and molecular packing. The reference molecule R(UF-Qx-2Cl) and nine structurally varied derivatives (F1–F9) were systematically examined using density functional theory (DFT) and time-dependent (TD-DFT) characterizations. Comprehensive electronic analyses, including frontier molecular orbitals, density of states, reorganization energies, open-circuit voltage estimations and charge transfer characteristics, were conducted. Most derivatives (F2–F9) exhibited narrowed band gaps (2.00–2.09 eV) compared to the reference (2.14 eV), suggesting enhanced light-harvesting capabilities. UV–Vis-NIR spectroscopy in chloroform solution revealed significant bathochromic shifts in absorption maxima for F2–F9 (770.52–835.76 nm), as compared to the reference (751.64 nm), corroborating improved optical responses. Notably, F1 with fluorinated terminals demonstrated a relatively high predicted open-circuit voltage (1.43 V). Among all candidates, F5 stood out with the lowest band gap (2.00 eV) and strongest absorption in both gas (738.99 nm) and solvent (835.76 nm) phases, highlighting its potential as a high-performance acceptor material in next-generation organic solar cells.


  • Modulation of Third-Order Nonlinear Optical Response in Copper-Induced Gold Nanoclusters

    by Fakhar Hussain, Riaz Hussain, Zobia Irshad, Muzammil Hussain, Muhammad Usman Khan, Junaid Yaqoob, Khurshid Ayub, Muhammad Adnan

    Nonlinear optical (NLO) materials play a pivotal role in controlling laser characteristics, including phase and frequency, making them essential for optoelectronic applications. This study presents a quantum chemical investigation into the effects of copper doping on the NLO properties of small gold clusters. Using density functional theory with the CAM-B3LYP/LanL2DZ level of theory, we examined both pure (Aum, where 8 ≤ m ≤ 10) and copper-doped (Aum-xCux) gold clusters. To the best of our knowledge, no theoretical studies have been reported on the nonlinear optical properties of pure and Cu-doped clusters. Copper incorporation leads to a marked reduction in the HOMO-LUMO energy gap from 4.77 eV down to 1.59 indicating enhanced NLO response. The dynamic NLO properties were computed at a standard Nd:YAG laser wavelength (1064 nm; ω = 0.0428 au). Among the doped clusters, Au1Cu8 exhibited the highest first hyperpolarizability β(-ω,ω,0), reaching 5.27 × 106 au. The second hyperpolarizability γ(-ω;ω,0,0) peaked at 3.89 × 107 au for Au4Cu5, while the third-order response γ(-ω;ω,0,0) was highest for Au2Cu8 at 1.03 × 1010 au. These results highlight copper-doped gold clusters as promising candidates for the development of high-performance NLO materials, with potential applications in next-generation electronic and photonic devices.


  • Enhancing Optical and Optoelectronic Characteristics of Nonfused Ring-Containing Electron Acceptors for Efficient Organic Photovoltaics

    by Hira Naz, Muzammil Hussain, Muhammad Adnan, Riaz Hussain, Zobia Irshad, Hany W. Darwish, Umar Farooq, Junaid Yaqoob, Jongchul Lim


  • Molecular Engineering of Unidirectional Non‐Fused π‐Bridge Containing Asymmetric Non‐Fullerene Acceptors for High‐Performance Organic Solar Cells

    by Parsa Saeed, Muhammad Adnan, Zobia Irshad, Riaz Hussain, Hany W. Darwish, Muzammil Hussain, Mahmood Ahmed, Jae Kwan Lee

    Developing small molecule‐based asymmetric non‐fullerene (SM‐NFAs) acceptors is highly desirable because they possess a great structural diversity, higher dipole moment, and strong intermolecular interactions. Herein, eight new A‐D‐π‐A type SM‐NFAs PS‐1 to PS‐8, having an indacenodithiophene central core, are designed. These designed materials and a synthetic reference molecule (PS) are characterized using various advanced quantum chemical approaches. The theoretical analysis investigated the structure‐property relationship, optical, optoelectronics, and photovoltaic characteristics of synthetic PS and modeled PS‐1 to PS‐8 molecules. Moreover, the electron‐hole overlapping, frontier molecular orbitals, excitation energy, dipole moment, binding energy, molecular electrostatic potential, density of states, heat map, transition density of states, and reorganization energies of the hole and electrons are specifically investigated. These modeled PS‐1 to PS‐8 series showed narrower energy gaps, decreased binding energies, and improved absorption characteristics. Among these, the modeled PS‐2 molecule shows a narrow energy gap (E g ) of 1.79 eV and enhanced absorbance of 877.45 nm compared to the synthetic reference PS molecule (E g 2.02 eV and absorption 741.58 nm). Moreover, a thorough analysis of the PS‐2/PTB7‐Th complex demonstrates efficient charge transfer at the donor‐acceptor interface. Therefore, it is believed that the proposed molecules PS‐1 to PS‐8 could be efficiently employed in preparing highly efficient organic solar cells (OSCs).


  • Open Access

    Deciphering the Role of Rhodanine Flanked Non-Fullerene Acceptor Molecules for Efficient Organic Photovoltaics

    by Zobia Irshad, Muzammil Hussain, Riaz Hussain, Muhammad Adnan

    In recent years, extensive research has been conducted with the aim of developing non-fullerene acceptors as they have a promising ability to drive the development of cost-effective and highly efficient organic solar cells (OSCs). By harnessing the potential of rhodanine-flanked non-fullerene acceptors (NFAs), we proposed eight new A-D-A type NFAs (SBA1–SBA8) through precise end-cap modifications on both sides of the bridging-core unit. We performed various advanced quantum chemical analyses to unveil these designed materials’ potential and compared them with the synthetic reference molecule (R). The proposed NFAs series presented lower binding and excitation energy, along with narrower energy gaps of 2.11 eV and enhanced absorption at 671.20 nm and 719.88 nm in gaseous and chloroform environments, respectively. Furthermore, the optoelectronic and photophysical characterizations related to the electrostatic potential, density of states, reorganization energy of electron and hole mobilities, and transition density matrix analysis reveal that these materials could be efficiently used as acceptor materials for efficient organic photovoltaics. Additionally, to check the impact of charge transfer at the donor: acceptor (D: A) interface, we studied the PTB7-Th:SBA1 D:A analysis and demonstrated a remarkable interface charge transfer phenomenon. Therefore, the engineered SBA1–SBA8 NFAs represent a significant advancement as sustainable and effective options for developing high-performance OSCs.


  • Structural Modification of BODIPY Molecules with Outstanding Photovoltaic Properties for Organic Solar Cells

    by Malik Muhammad Asif Iqbal, Riaz Hussain, Muzammil Hussain, Fakhar Hussain, Waqar Ashraf

    Organic solar cells (OSCs) have attracted significant interest from researchers due to their low cost, high-power conversion efficiency (PCE), and ability to compensate for light deficits. Four new acceptor molecules (CC1–CC4) have been designed. Several parameters have been studied including frontier molecular orbital (FMO), density of states (DOS), transition density matrix (TDM), reorganizational energies of electrons and holes, open circuit voltage (Voc), and charge transfer analysis. The designed molecules (CC1–CC4) show promising optoelectronic features, with a narrower energy gap (0.320–1.922 eV) and absorption properties demonstrating that designed molecules exhibit λmax (560–698 nm). Excitation energy values range from 1.776 eV to 2.216 eV, which is lower for all of the developed compounds. This study will help researchers to design molecules for the development of efficient OSCs.


  • Elucidating the Potential of Nonlinear Optical Behavior of Azo Dyes for Advanced Laser‐Based Technologies

    by Muhammad Naeem Mustafa, Fakhar Hussain, Muzammil Hussain, Riaz Hussain, Khurshid Ayub, Shabbir Muhammad, Muhammad Usman Khan, Mudssra Ehsan, Muhammad Adnan

    Organic nonlinear optical materials have received immense attention owing to their extensive applications in optoelectronics and photonics. Nonlinear optical (NLO) materials are significant components of data processing devices, optical computing, optical fibers, modulators, sensors, ultra‐fast switches, and optical storage devices. Therefore, an effort is made to explore the electronic and NLO response of commercially available azo dyes such as Tartrazine (E102), Yellow 2G (E107), Sunset Yellow (E110), Azorubine (E122), Amaranth (E123), Ponceau 4R (E124), and Allura Red (E129) using density functional theory. Frontier molecular orbital analysis reveals that the azo dyes’ energy gap (EH‐L) ranges from 5.30 to 6.88 eV. E122 contains the narrowest bandgap of 5.30 eV compared to others. The total density‐of‐state and noncovalent interactions analyses confirm the charge transfer and type of interactions in various regions of the azo dyes. Molecular electrostatic potential maps reveal that the azo dyes are involved in significant charge distribution regions favourable for the enhancement of NLO response. Moreover, the highest first hyperpolarizability (βo3ggn ) value of 4184.87 au is also observed for E122, making it a better candidate for high‐performance NLO material than others. Therefore, these results may advance the development of NLO materials for efficient laser‐based technologies.


  • Open Access

    Development of Dopant-Free N,N′-Bicarbazole-Based Hole Transport Materials for Efficient Perovskite Solar Cells

    by Muhammad Adnan, Hira Naz, Muzammil Hussain, Zobia Irshad, Riaz Hussain, Hany W. Darwish

    Efficient and stable hole-transport material (HTM) is essential for enhancing the efficiency and stability of high-efficiency perovskite solar cells (PSCs). The commonly used HTMs such as spiro-OMeTAD need dopants to produce high efficiency, but those dopants degrade the perovskite film and cause instability. Therefore, the development of dopant-free N,N′-bicarbazole-based HTM is receiving huge attention for preparing stable, cost-effective, and efficient PSCs. Herein, we designed and proposed seven distinct small-molecule-based HTMs (B1–B7), which are synthesized and do not require dopants to fabricate efficient PSCs. To design this new series, we performed synergistic side-chain engineering on the synthetic reference molecule (B) by replacing two methylthio (–SCH3) terminal groups with a thiophene bridge and electron-withdrawing acceptor. The enhanced phase inversion geometry of the proposed molecules resulted in reduced energy gaps and better electrical, optical, and optoelectronic properties. Density functional theory (DFT) and time-dependent DFT simulations have been used to study the precise photo-physical and optoelectronic properties. We also looked into the effects of holes and electrons and the materials’ structural and photovoltaic properties, including light harvesting energy, frontier molecular orbital, transition density matrix, density of states, electron density matrix, and natural population analysis. Electron density difference maps identify the interfacial charge transfer from the donor to the acceptor through the bridge, and natural population analysis measures the amount of charge on each portion of the donor, bridge, and acceptor, which most effectively represents the role of the end-capped moieties in facilitating charge transfer. Among these designed molecules, the B6 molecule has the greatest absorbance (λmax of 444.93 nm in dichloromethane solvent) and a substantially shorter optical band gap of 3.93 eV. Furthermore, the charge transfer analysis reveals superior charge transfer with improved intrinsic characteristics. Furthermore, according to the photovoltaic analysis, the designed (B1–B7) HTMs have the potential to provide better fill factor and open-circuit voltages, which will ultimately increase the power conversion efficiency (PCE) of PSCs. Therefore, we recommend these molecules for the next-generation PSCs.


  • Tailoring Optoelectronic Properties of A–D–A Type Nonfullerene Acceptors with Fused Aromatic Thiophene-Furan Bridges for Efficient Organic Photovoltaics

    by Fakhar Hussain, Muzammil Hussain, Talha Hassan, Riaz Hussain, Azhar Ali Haidry, Zobia Irshad, Hany W. Darwish, Muhammad Adnan

    We report the molecular engineering of new small molecule-based medium band gap nonfullerene acceptors containing a strong electron acceptor backbone of DPP attached to the [ ]-spacer-based furan linker. We systematically designed five new designed molecules (H1−H5) and studied their structural, optical, photovoltaic and optoelectronic characteristics. We employed advanced quantum chemical approaches to characterize these molecules (H1–H5) and synthetic reference molecule R. The designed molecules exhibit improved light absorption and narrower energy bandgaps in contrast to R. Moreover, a lower excitation energy of these molecules (H1−H5) enables easier excitation and phase separation in the excited states. Analysis of the geometric and physiochemical properties provides evidence of the enhanced photovoltaic and optoelectronic characteristics of these molecules in comparison to the R molecule and other molecules with similar structures that have been previously reported. Among all these designed series, H3 stands out with a minimal 1.99 eV band gap, excellent hole ([ ] 0.0079 eV) and electron ([ ] 0.0076 eV) mobility, low binding energy ([ ] 0.42 eV) and highly red-shifted absorption characteristics. Furthermore, these molecules also displayed good electron and hole mobilities, indicating their tremendous potential in producing high-efficiency organic solar cells. Therefore, this study showcases the molecular modeling and effectiveness of these DPP and furan-containing molecules and their promising potential for organic photovoltaics.