Rodrigo Dias Santos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rodrigo Dias Santos has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
Aila G.V. Brandão
1 shared publication- Angelo Marcio Gomes
Instituto de Física, Universidade Federal do Rio de Janeiro, 21941-585 1 , Rio de Janeiro
1 shared publication - Benilde Faria Oliveira Costa
University of Coimbra, CFisUC, Physics Department, 3004-516 Coimbra, Portugal
1 shared publication - Braulio Soares Archanjo
National Institute of Metrology Quality and Technology (Inmetro), Materials Metrology Division (DIMAT) 3 , Xerém, 25250-020 Rio de Janeiro
1 shared publication Camilla Rocha
1 shared publication- Camilla Rocha de Oliveira Fontoura1 shared publication
Latest Publications
- Open Access
- 18 October 2026
- Published by Springer Nature in Catalysis Letters
- Vol. 156 (11) , 307
Engineering Metal–Acid Interactions in Ni–Re/HZSM-5 for Selective Hydrodeoxygenation of Oleic Acid: The Effect of Impregnation Sequence
The performance of bifunctional Ni–Re/zeolite catalysts in fatty-acid deoxygenation depends on the spatial organization of the metallic and acidic functions. In this work, the preparation sequence of bifunctional Ni–Re/HZSM-5 catalysts was varied to determine how metal organization and accessible acidity affect oleic acid hydrotreatment. Catalysts nominally containing 6 wt% Ni and 2 wt% Re were prepared by co-impregnation and by sequential Ni-first or Re-first impregnation. Additional calcination steps decreased Re retention from 2.0 wt% for NiRe/HZSM-5 to 1.5 and 1.0 wt% for Ni–Re/HZSM-5 and Re–Ni/HZSM-5, respectively. Co-impregnation gave the smallest XRD-derived Ni crystallites (9.2 nm), the highest apparent H 2 -chemisorption-derived dispersion of the series (2%), and a comparatively uniform metallic distribution. At 340 °C, 30 bar H 2 , and WHSV = 5 h⁻ 1 , all bimetallic catalysts maintained high oleic acid conversion, but the condensable-product distribution depended strongly on preparation route. NiRe/HZSM-5 initially favored alkyl aromatics, whereas Re–Ni/HZSM-5 favored C 1 ₇–C 18 paraffins and isoparaffins. After approximately 24 h, stearic acid accumulated despite sustained oleic acid conversion, indicating preferential loss of the deoxygenation function. Apparent coke contents followed Ni–Re/HZSM-5 (7.58%) > NiRe/HZSM-5 (6.32%) > Re–Ni/HZSM-5 (4.49%). The results show that impregnation sequence controls Re retention, accessible metallic surface, relative Brønsted/Lewis character, secondary conversion, and coke formation; none of the routes simultaneously maximized oxygen removal, hydrocarbon formation, and stability in the studied conditions.
- 18 October 2026
- Published by Springer Nature in Catalysis Letters
- Vol. 156 (11) , 307
Open AccessEngineering Metal–Acid Interactions in Ni–Re/HZSM-5 for Selective Hydrodeoxygenation of Oleic Acid: The Effect of Impregnation Sequence
The performance of bifunctional Ni–Re/zeolite catalysts in fatty-acid deoxygenation depends on the spatial organization of the metallic and acidic functions. In this work, the preparation sequence of bifunctional Ni–Re/HZSM-5 catalysts was varied to determine how metal organization and accessible acidity affect oleic acid hydrotreatment. Catalysts nominally containing 6 wt% Ni and 2 wt% Re were prepared by co-impregnation and by sequential Ni-first or Re-first impregnation. Additional calcination steps decreased Re retention from 2.0 wt% for NiRe/HZSM-5 to 1.5 and 1.0 wt% for Ni–Re/HZSM-5 and Re–Ni/HZSM-5, respectively. Co-impregnation gave the smallest XRD-derived Ni crystallites (9.2 nm), the highest apparent H 2 -chemisorption-derived dispersion of the series (2%), and a comparatively uniform metallic distribution. At 340 °C, 30 bar H 2 , and WHSV = 5 h⁻ 1 , all bimetallic catalysts maintained high oleic acid conversion, but the condensable-product distribution depended strongly on preparation route. NiRe/HZSM-5 initially favored alkyl aromatics, whereas Re–Ni/HZSM-5 favored C 1 ₇–C 18 paraffins and isoparaffins. After approximately 24 h, stearic acid accumulated despite sustained oleic acid conversion, indicating preferential loss of the deoxygenation function. Apparent coke contents followed Ni–Re/HZSM-5 (7.58%) > NiRe/HZSM-5 (6.32%) > Re–Ni/HZSM-5 (4.49%). The results show that impregnation sequence controls Re retention, accessible metallic surface, relative Brønsted/Lewis character, secondary conversion, and coke formation; none of the routes simultaneously maximized oxygen removal, hydrocarbon formation, and stability in the studied conditions.
- 25 August 2025
- Published by Elsevier in Applied Surface Science
- Vol. 714
Defect-enhanced Visible-light Photocatalysis in α–Fe2O3 Nanoparticles Synthesized via a Maytenus rigida-assisted Sol-Gel Method
- 25 August 2025
- Published by Elsevier in Applied Surface Science
- Vol. 714
Defect-enhanced Visible-light Photocatalysis in α–Fe2O3 Nanoparticles Synthesized via a Maytenus rigida-assisted Sol-Gel Method
- 26 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 60 (9) , 1-4
Exchange Bias Effects in Bismuth Ferrite Nanostructures Produced by Pulsed Laser Deposition
The exchange bias characteristics of bismuth ferrite nanostructures with different morphologies produced by pulsed laser deposition (PLD) are reported. Distinct bismuth ferrite nanostructures were achieved by employing different background pressures during deposition: vacuum ( $10^{-6}$ torr) and high O2 pressures (0.25 and 4.0 torr), as well as thermal treatment after deposition at $500~^{\circ } $ C. Scanning electron micrographs revealed nanostructures with distinct morphologies, including a highly compact thin film, dense nanoparticle clusters, and arrangement of nanoparticles in contact with fewer neighbors. The field-cooled magnetization curves of the nanostructures display a horizontal shift (exchange bias) across all morphologies studied, along with a vertical shift for dense nanoparticle clusters. The magnetic properties are discussed considering the morphologies of the nanostructures as well as their role in the magnetic anisotropy and interaction between nanoparticles.
- 26 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 60 (9) , 1-4
Exchange Bias Effects in Bismuth Ferrite Nanostructures Produced by Pulsed Laser Deposition
The exchange bias characteristics of bismuth ferrite nanostructures with different morphologies produced by pulsed laser deposition (PLD) are reported. Distinct bismuth ferrite nanostructures were achieved by employing different background pressures during deposition: vacuum ( $10^{-6}$ torr) and high O2 pressures (0.25 and 4.0 torr), as well as thermal treatment after deposition at $500~^{\circ } $ C. Scanning electron micrographs revealed nanostructures with distinct morphologies, including a highly compact thin film, dense nanoparticle clusters, and arrangement of nanoparticles in contact with fewer neighbors. The field-cooled magnetization curves of the nanostructures display a horizontal shift (exchange bias) across all morphologies studied, along with a vertical shift for dense nanoparticle clusters. The magnetic properties are discussed considering the morphologies of the nanostructures as well as their role in the magnetic anisotropy and interaction between nanoparticles.