Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pascal Mwenge has a total of 15 co-authors. Here are the top co-authors by number of shared publications:

  • Hilary Rutto

    Department of Chemical Engineering Durban University of Technology Durban South Africa

    4 shared publications
  • Hilary Rutto

    Clean Technology and Applied Materials Research Group, Department of Chemical and Metallurgical Engineering, Vaal University of Technology, Private Bag X021, Vanderbijlpark 1900, South Africa

    3 shared publications
  • Shonisani Salvation Muthubi

    Department of Chemical and Metallurgical Engineering, Vaal University of Technology, Private Bag X021, Vanderbijlpark 1900, South Africa

    3 shared publications
  • Tumisang Seodigeng

    Department of Chemical and Metallurgical Engineering Faculty of Engineering and Technology, Vaal University of Technology Vanderbijlpark South Africa

    3 shared publications
  • Dorcas Museme Mabulay

    Department of Chemical and Metallurgical Engineering, Vaal University of Technology, Private Bag X021, Vanderbijlpark 1900, South Africa

    2 shared publications
  • Salvation Muthubi

    Department of Chemical and Metallurgical Engineering, Faculty of Engineering and Technology, Vaal University of Technology, Vanderbijlpark, South Africa

    2 shared publications

Latest Publications

  • Open Access

    Modelling and MATLAB-Based Optimisation of Carbon Dioxide Adsorption Using Zn-MOF-5

    by Shonisani Salvation Muthubi, Dorcas Museme Mabulay, Pascal Kilunji Mwenge

    The growing concern over greenhouse gas emissions has prompted the need for efficient carbon dioxide (CO2) capture technologies. This study focuses on simulating CO2 adsorption using a zinc-based metal–organic framework (Zn-MOF-5). The primary aim is to develop and refine a robust MATLAB-based approach for equilibrium and kinetic modelling using the Linear Driving Force (LDF) model and Langmuir isotherm, capable of accurately predicting CO2 adsorption performance under varying operational conditions. By employing advanced computational methods, this research seeks to streamline the process design and enhance the feasibility of sustainable CO2 capture solutions. Excel was used for statistical analysis and validation, while MATLAB R2025a was utilised for equilibrium and kinetic modelling using the LDF model and the Langmuir isotherm. The independent effects of temperature, pressure, and flow rate were evaluated using the variable effect method. The study found a significant negative association between temperature and CO2 uptake, consistent with the exothermic nature of the adsorption process. Pressure had a significant impact on adsorption, whereas flow rate had little effect within the investigated range. The simulated CO2 uptake (21.196 mmol/g) closely matched the experimental data (21.07 mmol/g) with a 0.59% variance, validating the model’s trustworthiness. The research shows that Zn-MOF-5 has a strong adsorption potential and that simulation tools can significantly minimise experimental costs and time. Furthermore, it underscores the potential of simulation tools to significantly reduce experimental costs and time, paving the way for more efficient and effective carbon capture solutions. This initiative not only contributes to optimising process design but also promotes sustainable practices in addressing global CO2 emissions. By contributing to process optimisation, this study aligns with the United Nations Sustainable Development Goal (SDG) 13: Climate Action, which emphasises the urgent need for innovative solutions to combat climate change and its impacts. Furthermore, it promotes sustainable practices to address global CO2 emissions, thereby supporting broader efforts for environmental sustainability.

  • Open Access

    Simulation of Hydrogen Production from Crude Glycerol Using Steam Reforming

    by Dorcas Museme Mabulay, Shonisani Salvation Muthubi, Pascal Kilunji Mwenge

    The rising global production of biodiesel has led to a surplus of crude glycerol, a byproduct accounting for about 10% of biodiesel’s weight. Crude glycerol contains various impurities, including unreacted alcohol, soap, free fatty acids, water, and leftover reagents, which are often considered waste. Several methods have been explored to utilise this surplus, such as combustion for energy recovery, composting, animal feed, and purification. However, purification can be expensive and is often not economically viable. While there is growing interest in hydrogen production via the steam reforming of glycerol, there is a significant lack of detailed information and research on simulating this process using ChemCAD 8.1.0 software. This study aimed to simulate glycerol steam reforming (GSR) using ChemCAD, a process that converts crude glycerol from biodiesel into hydrogen. The process operates on a Gibbs free energy reactor, simulating GSR using the UNIFAC thermodynamic model under various conditions: temperatures ranging from 200 °C to 1000 °C, steam-to-glycerol mass ratios from 2:1 to 12:1, and a nickel catalyst maintained at 1 wt.%. The results demonstrate maximum glycerol consumption at temperatures above 600 °C and at a steam-to-glycerol mass ratio of 6:1. The optimum conditions for achieving a hydrogen yield of 65.23% occur at 800 °C and a ratio of 8:1 while minimising the formation of byproducts such as CO2, CO, and CH4. These findings provide valuable insights for optimising GSR processes and promoting the sustainable utilisation of renewable energy sources, thereby contributing to the circular economy and supporting the United Nations Sustainable Development Goal 7 (Affordable and Clean Energy).

  • Open Access

    Simulation of Green Diesel by Hydrotreatment of Waste Vegetable Oil

    by Pascal Mwenge, Thubelihle Mahlangu, Andani Munonde

    Due to the world’s rising energy demand and reliance on fossil fuels, exploring cleaner energy sources is urgent. Green diesel from renewable resources, such as waste vegetable oil, is promising because it is compatible with petroleum diesel from fossil fuels. This study examined the simulation of the hydrotreatment process of waste cooking oil (WCO) to produce green diesel. ChemCAD version 8.1 was used to develop the simulation, along with a kinetic model based on the Langmuir–Hinshelwood mechanism (an LH-C-ND model), where fatty acids, such as oleic, stearic, and palmitic acid, in WCO are converted into long-chain hydrocarbons (C15, C16, C17, and C18). The influence of process parameters on green diesel yield was assessed at various temperatures, pressures, and H2/oil ratios. The best process conditions for green diesel production were identified as a temperature of 275 °C, a pressure of 30 bars, and an H2/oil ratio of 0.3. Minimising the formation of CO2, CO, and water. Under these conditions, a high green diesel yield was achieved, with WCO conversion exceeding 90%, and over 80% of the products were suitable for green diesel. This research supports SDG 7, which aims for universal access to affordable, reliable, sustainable, and modern energy, by exploring cleaner energy options, such as green diesel from waste vegetable oil. It is recommended to perform a life cycle assessment to evaluate the overall environmental impact.

  • Open Access

    Optimization and predictive modelling of biodiesel production from waste cooking oil catalyzed by blast furnace slag geopolymer using RSM and machine learning

    by Pascal Mwenge, Djemima Bulanga, Hilary Rutto, Tumisang Seodigeng

    Biodiesel production from waste cooking oil (WCO) has emerged owing to growing interest in sustainable energy sources. Geopolymers synthesized from industrial wastes, such as blast furnace slag (BFS), are promising catalysts because of their environmental benefits and catalytic properties. However, a knowledge gap exists in the application of machine learning (ML) for the transesterification of WCO catalyzed by geopolymer. This study aimed to optimize and predict biodiesel yield using a numerical approach, response surface methodology (RSM), and two ML algorithms: artificial neural network (ANN) and adaptive neuro‐fuzzy inference system (ANFIS). Four input process parameters were investigated: methanol‐to‐oil ratio (20–50 wt.%), catalyst ratio (5–15 wt.%), reaction time (4–8 h), and reaction temperature (30–70°C), with biodiesel yield as the response. Central composite design (CCD) was used to evaluate the effects of process parameters, and models were evaluated using R 2 , root mean squared error (RMSE), mean absolute error (MAE), mean average percent error (MAPE), and average relative error (ARE). The optimum yield of 98.635% was achieved at 11.103 wt.% catalyst, 44.068 wt.% methanol to oil, 6.704 h reaction time and 57.493°C reaction temperature. ANFIS displayed the best predictive performance ( R 2 : 0.996, RMSE: 1.429, MAE: 0.684, and MAPE: 1.548). Analysis of variance (ANOVA) results indicated the methanol‐to‐oil ratio had the most significant impact ( F ‐value: 91.77), followed by the catalyst ratio ( F ‐value: 51.58). The produced biodiesel met ASTM D6571 and EN 14214 standards. Future research should focus on catalyst reusability and catalyst synthesis optimization for industrial applications. This study contributes to global efforts toward sustainable biodiesel production by addressing waste disposal and green fuel development.


  • Open Access

    Optimisation of Biodiesel Production from Waste Margarine Oil Using Response Surface Methodology

    by Pascal Mwenge, Salvation Muthubi, Hilary Rutto

    This work presents biodiesel production using waste margarine oil and response surface methodology (RSM) for optimisation. The transesterification of waste margarine oil was carried out using sodium hydroxide (NaOH) as a catalyst under atmospheric pressure in a lab-scale batch reactor. Central composite design (CCD) was used to optimise four parameters: methanol-to-oil ratio (3–15 mol/mol), catalyst ratio (0.3–1.5 wt.%), reaction time (30–90 min), and reaction temperature (30–70 °C). Numeral optimisation was performed, and an optimum yield of 99.1% was obtained at an 11.906 methanol-to-oil mol ratio, 1.113 wt.% catalyst ratio, 59.646 min reaction time, 52.459 °C temperature, and a low percentage error yield of 0.942%. Analysis of variance (ANOVA) showed that the methanol-to-oil ratio had the highest influence on the biodiesel yield, followed by the catalyst ratio, and reaction time had the least impact after temperature. The kinetics study revealed that the reaction is controlled by a pseudo-first order, and the activation energy was found to be 62.41 kJ/mol. It was concluded that biodiesel could be produced using waste margarine oil as a cost-effective feedstock optimised by RSM.

  • Open Access

    Biodiesel Production from Animal Fats Using Blast Furnace Geopolymer Heterogeneous Catalyst: Optimisation and Kinetic Study

    by Pascal Mwenge, Aaron Luboya, Salvation Muthubi, Hilary Rutto, Tumisang Seodigeng

    Biodiesel is a sustainable fuel alternative that is typically produced through a transesterification process that primarily employs homogeneous catalysts. However, they generate significant amounts of wastewater and are often non-\recyclable. This study aims to investigate the application of heterogeneous blast furnace slag geopolymer catalyst for biodiesel production from animal fat. Central composite design was employed to optimise the transesterification process, considering four key variables: the methanol-to-oil ratio (20–50 wt.%), reaction time (3–7 h), reaction temperature (30–70 °C) and catalyst-to-oil ratio (3–15 wt.%). The heterogeneous geopolymer catalyst was characterised using Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction. These analyses confirmed the geopolymerisation of the blast furnace slag and revealed no modifications to the geopolymer structure following the transesterification reaction. RSM optimisation resulted in 97.436% biodiesel yield, which was achieved at a constant stirring rate of 450 RPM, a reaction time of 6.254 h, a catalyst ratio of 9.996 wt.%, a methanol-to-animal fat ratio of 33.435 wt.%, and a reaction temperature of 50.509 °C, which was experimentally validated. The transesterification process followed pseudo-first-order reaction kinetics, with an activation energy of 43.76 kJ/mol. These findings demonstrate the potential of animal fat as a low-cost feedstock for biodiesel production catalysed by blast furnace slag geopolymer, offering a more sustainable and environmentally friendly alternative to traditional homogeneous catalysts.


  • Open Access

    Modelling and Optimisation of Biodiesel Production from Margarine Waste Oil Using a Three-Dimensional Machine Learning Approach

    by Pascal Mwenge, Hilary Rutto, Tumisang Seodigeng

    This work presents the use of three-dimensional machine learning approaches, namely the response surface methodology (RSM), the artificial neural network (ANN), and the adaptive neuro-fuzzy inference system (ANFIS), to optimise and model the biodiesel yield from waste margarine oil. The effect of the process parameters methanol-to-oil ratio (3–15 mole), catalyst ratio (0.3–1.5 wt. %), reaction time (30–90 min), and reaction temperature (30–70 °C) were studied. The performance metric results for the RSM, ANN, and ANFIS were 0.991, 996, and 0.998 for regression (R2); 0.924, 0.566, and 0.324 for root mean square error (RMSE); 0.568, 0.267, and 0.202 for mean absolute error (MAE); 0.746, 0.333, and 0.226 for mean absolute percentage error (MAPE); 0.008, 0.004, and 0.003 for average relative error (ARE); and 4.503, 2.114, and 1.828 for mean percentage standard deviation (MPSD). The developed three-dimensional machine learning approach—the RSM, ANN, and ANFIS models—is a potential method for optimising and modelling biodiesel yield. The study results may be used to create sustainable, efficient, and economical solutions for recycling waste margarine oil.


  • Open Access

    Application of Machine Learning for Methanolysis of Waste Cooking Oil Using Kaolinite Geopolymer Heterogeneous Catalyst

    by Pascal Mwenge, Hilary Rutto, Tumisang Seodigeng

    This work uses three machine learning techniques, response surface methodology (RSM), artificial neural network (ANN), and adaptive neuro-fuzzy inference system (ANFIS) to optimise and model biodiesel production from waste cooking oil using process parameters such as methanol-to-oil ratio, catalyst loading, reaction temperature, and reaction time. RSM was used for process optimisation. Model construction of the ANN model used 70% of the data for training, 15% for testing, and 15% for validation. The network was trained using feed-forward propagation and the Levenberg–Marquardt algorithm. The ANFIS was generated using a grid partition and trained using a hybrid method. The effectiveness of the machine learning was assessed through error metrics such as regression (R2), root mean square error (RMSE), mean absolute error (MAE), mean absolute percentage error (MAPE) and average relative error (ARE). The optimum yield was obtained at 15 wt.%, 4 wt.%, 120 °C, and 4 h, methanol-to-oil ratio, catalyst loading, temperature, and reaction time, respectively, yielding 93.486%.