SSShuang Sun

Shuang Sun

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shuang Sun has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Distributed autonomous orbit determination for LEO constellations using HAS and inter-satellite links

    by Shuang Sun, Hongzhou Chai, Min Wang, Kaidi Jin, Changjian Liu, Yingdong Zhou, Tengfei Bai

  • A correlation-consistent distributed orbit determination and broadcast ephemeris generation scheme for LEO constellations

    by Shuang Sun, Hongzhou Chai, Min Wang, Fan Zhang, Changjian Liu, Yingdong Zhou, Tengfei Bai

  • Real-time multi-frequency phase OSB estimation from BDS-3 PPP-B2b and Galileo HAS

    by Zhanpeng Zhang, Yingdong Zhou, Min Wang, Changjian Liu, Feng Ming, Shuang Sun

    To address the long convergence time of satellite-based Precise Point Positioning (PPP) using BDS-3 PPP-B2b and Galileo high accuracy service (HAS) in the Asia-Pacific region, this study investigates real-time multi-frequency phase OSB estimation and PPP-AR based on the integration of the two services. In the Asia-Pacific region, real-time orbit and clock corrections from PPP-B2b and Galileo HAS were first recovered and unified in reference. A tightly combined real-time phase OSB estimation method was then developed using observations from the complementary constellations, and a corresponding tightly combined real-time PPP-AR model was established. Four schemes were designed: PPP-B2b BDS-3/GPS, HAS Galileo/GPS, PPP-B2b BDS-3/GPS + HAS Galileo, and HAS Galileo/GPS + PPP-B2b BDS-3. Phase OSB products were estimated and ambiguities were fixed using 10 d of multi-frequency global navigation satellite system observations from 21 reference stations in the Asia-Pacific region. PPP/PPP-AR performance was validated using observations from 11 rover stations, and the influence of GPS precise ephemerides with different accuracies on phase OSB estimation was also analyzed. The results show that the integrated PPP-B2b/Galileo HAS schemes provided better satellite geometry than the single-service schemes. Among the tested schemes, B2b C/G + HAS E achieved the best positioning performance, with mean E, N, and U accuracies of 4.7 cm, 2.9 cm, and 7.6 cm, respectively, for the PPP-AR fixed solution, and a mean convergence time of 5.65 min. Compared with the float solution, the improvements were 27.7%, 17.1%, 16.5%, and 42.0%, respectively. In the Asia-Pacific region, HAS GPS showed data interruptions and a smaller number of visible satellites, which resulted in lower phase OSB sequence stability and PPP/PPP-AR positioning accuracy than PPP-B2b GPS. This explains the better performance of B2b C/G + HAS E than HAS E/G + B2b C. The proposed satellite-based PPP integration scheme uses satellite-broadcast corrections at the user end and does not require real-time correction transmission through terrestrial communication networks, providing a technical option for real-time high-precision positioning in areas with limited network access in the Asia-Pacific region.

  • Real-time multi-GNSS and mixed-frequency cycle slip detection and repair method based on geometry-based and geometry-free models with improved algorithm

    by Shuang Sun, Hongzhou Chai, Min Wang, Changjian Liu, Yingdong Zhou, Qiankun Zhang, Yang Liu, Liang Chen


  • Outlier detection based on variance estimation for satellite clock offset and its application in Galileo HAS service

    by Songhui Han, Min Wang, Hongzhou Chai, Shuang Sun

    Outlier detection and mitigation in satellite clock offsets are prerequisites for ensuring high-precision positioning and timing services. This paper proposes a quartile-based variance estimation method dedicated to satellite clock offset outlier detection. A systematic theoretical analysis and robustness evaluation, based on the breakdown point and influence function, are conducted and compared with the commonly used median-based and Allan variance methods. Simulation experiments reveal that the quartile-based method achieves superior accuracy with higher computational efficiency under low anomaly contamination, while the median-based method is recommended for high-anomaly scenarios. The real-time clock offset data of high accuracy service from Galileo are used to validate the outlier detection performance of the methods, and the results show both quartile-based and median-based methods achieve rapid and stable convergence, significantly outperforming sample-based and Allan variance approaches. Precise point positioning (PPP) experiments further confirm that the accuracy of horizontal PPP has significantly improved in the N-direction and E-direction, with enhancement magnitudes reaching 10%–30% in some cases based on robust variance estimation methods. However, in the U-direction, the improvement in accuracy is limited.


  • A combination method for correcting satellite-based precise point positioning services on the user side

    by Rui Ji, Min Wang, Changjian Liu, Zhanpeng Zhang, Liang Chen, Yingdong Zhou, Shuang Sun

    In recent years, several Global Navigation Satellite Systems (GNSSs) have begun offering free satellite-based Precise Point Positioning (PPP) services, including Galileo’s High Accuracy Service (HAS), BDS’s PPP-B2b, and Japan’s Quasi–Zenith Satellite System (QZSS) multi-GNSS advanced orbit and clock augmentation (MADOCA). In real-time positioning correction methods, individual services are prone to interruptions and anomalies. This study proposes combining multiple correction services to enhance correction availability and continuity from the user side, thereby fully leveraging observational data from various satellite positioning services. After detecting outliers in clock corrections and standardizing reference frames across services, a Kalman filter is employed to estimate the combined clock corrections. Since GPS is currently the only GNSS supported by these services, this study incorporates GPS correction data from Galileo’s HAS, BDS’s PPP-B2b and Japan’s QZSS MADOCA in a one-week experiment. By combining satellite-based correction products from different services, users can fully utilize GNSS corrections from each. This study demonstrates that combing corrections from multiple services significantly improves their availability and continuity. The average correction availability increased from approximately 75% for a single service to 99% for combined corrections. Static and simulated kinematic experiments at Multi-GNSS Pilot Project stations show that the combination strategy improves positioning accuracy by approximately 52.7%, 10.6% and 59.1% compared to PPP-B2b, MADOCA and HAS, respectively, with convergence time reductions of 48.5%, 37.1% and 67.1%. Marine experiment results with an unmanned underwater vehicle demonstrate that the combination strategy improves horizontal positioning accuracy by 19.7%, 59.1% and 17.8%, and vertical positioning accuracy by 54.1%, 77.8% and 1.2% compared to PPP-B2b, HAS and MADOCA.


  • Real-time detection and repair method for cycle slips in optimal linear combination of BDS-3 five-frequency signals

    by Zhanpeng Zhang, Changjian Liu, Min Wang, Shuang Sun, Xin Meng, Yang Liu

    This paper proposes an evaluation method for selecting the optimal linear combination coefficients for five-frequency cycle slip detection in BeiDou-3. First, the essence of the optimal linear combination problem for cycle slip detection is analyzed, and two linear combination constraint strategies are introduced: geometry-free ionospheric-free (GFIF) and geometry-free (GF) constraints. For the GFIF combination, a linear combination index is proposed to assess the cycle slip detection performance of different linear combinations, providing a quantitative measure for evaluating the performance of various combination coefficients. By solving the constrained optimization problem, the optimal linear combinations for phase–only geometry-free ionospheric-free (PGFIF) and phase-code geometry-free ionospheric-free (PCGFIF) are determined. For the GF combination, based on phase biases induced by cycle slips, standard deviations of cycle slip detection measurements, ionospheric delay amplification factors, and the success rate of detecting insensitive cycle slips using GFIF, suitable phase-only geometry-free combination (PGF) combinations are selected. The optimal linear combination for PGF is then determined based on the principle of minimizing the condition number. For cycle slip repair, the least squares method is used to solve for the float solution and its covariance matrix, while the LAMBDA algorithm is employed to search for the integer solution of the cycle slip. Finally, the effectiveness of the proposed method is validated through experiments using static, shipborne kinematic, ionospheric active period, and low-sampling-rate data. The experimental results demonstrate that, under five-frequency conditions, the proposed algorithm can accurately detect and repair all simulated cycle slips, confirming the feasibility and effectiveness of the method.


  • Open Access

    Determination Method of Optimal Decomposition Level of Discrete Wavelet Based on Joint Jarque–Bera Test and Combination Weighting Method

    by Zhanpeng Zhang, Changjian Liu, Min Wang, Shuang Sun, Zhao Zhan

    To overcome the limitations of traditional evaluation indicators in determining the optimal wavelet decomposition level, this paper proposes an adaptive method for selecting the best decomposition level by combining the Jarque–Bera test and a composite weighting approach. Firstly, in the noise extraction stage, the Jarque–Bera test is employed to ensure that the extracted noise follows Gaussian white noise characteristics, thereby avoiding issues of insufficient denoising or signal distortion. Secondly, in the evaluation stage of the denoised signal, a comprehensive consideration of the geometric and physical meanings of various evaluation metrics, as well as the Pearson correlation coefficients between them, is undertaken. The RMSE and smoothness are selected as evaluation indicators for the denoising performance. Since these two metrics describe signal characteristics from different dimensions, a weighted combination approach is used to generate a single composite evaluation index. Additionally, to overcome the limitations of using a single weighting method, a composite weighting strategy is proposed by combining the entropy weight method and the coefficient of variation method. The composite coefficient between these two weighting methods is calculated using the variance coefficient method, yielding a new composite evaluation metric. A smaller value of this metric indicates better denoising performance, and the corresponding optimal decomposition level is more accurately determined. The simulation results demonstrate that the proposed comprehensive evaluation method can accurately determine the optimal wavelet decomposition level in both known and unknown truth-value cases, exhibiting a high accuracy and good applicability. Furthermore, the experimental results show that using the optimal decomposition level determined by the proposed method for wavelet denoising leads to smoother peak regions, more stable waveforms and significantly improved denoising performance.


  • Station-based SDB correction for GPS triple-frequency observations and its application on relative positioning

    by Qiankun Zhang, Hongzhou Chai, Min Wang, Shuang Sun, Yang Liu

    Due to the chip shapes of Global Navigation Satellite System (GNSS) live signals differ from ideal conditions, GNSS satellite signals are distorted, which leads to different code biases, namely signal distortion biases (SDB). Existing SDB estimation methods are based on code observation combinations with large noise and face the problem of unreasonable classification, which would seriously affect the reliability of SDB estimation and correction. To solve this problem, a station-based SDB estimation method is proposed in this study. First, a full-rank linear system independent of the ionosphere is derived based on the classical Uofc model. Then, triple-frequency SDBs relative to the reference stations are estimated with three types of virtual observations. To assess and validate the performance of the proposed method, real data of 335 stations from multi-GNSS experiment (MGEX) network in January 2023 are chosen for GPS triple-frequency SDB estimation. The results show that the estimated SDBs of all stations equipped with the same receiver types keep good consistency. In addition, the estimated SDBs are shown to be related to receiver types and antenna types, and maintain high stability over the whole month. Furthermore, the code residuals of 4 zero-baselines from Curtin University CORS and the real-time kinematic (RTK) ambiguity fixing rates of 8 short baselines from the MGEX network are evaluated to validate the correction performance of the estimated SDBs. The results show that the code residuals of zero-baselines are close to zero with SDB correction, and the systematic deviations in the code residuals can be effectively decreased. For the RTK application, the ambiguity fixing rates of the selected short baselines can be increased by about 40.0% after SDB correction. In addition, the percentage of ratio values after ambiguities are fixed with SDB correction is always higher than that without SDB correction, which effectively improves the reliability of RTK ambiguity resolution.


  • Long-term performance analysis of BDS-3 precise point positioning (PPP-B2b) service

    by Shuang Sun, Min Wang, Changjian Liu, Xin Meng, Rui Ji