Avant Srinivas Shrikanth
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Avant Srinivas Shrikanth has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Bangalore Rajshekar Kavya
Department of Civil Engineering, Adichunchanagiri Institute of Technology, affiliated to Visvesvaraya Technological University, Chikkamagaluru - 577102, India
2 shared publications - Kowshika Sheshachala Sreekeshava
Department of Civil Engineering, Jyothy Institute of Technology, Affiliated to Visvesvaraya Technological University, Belagavi 590018, India
2 shared publications - A. R. Nagalakshmi
Department of Mathematics, Malnad College of Engineering, Hassan
1 shared publication - B. R. Kavya
Department of Civil Engineering, Adichunchanagiri Institute of Technology, Chikkamagaluru 577102, India
1 shared publication - Balluru Thammannagowda Ashwini1 shared publication
- Deekshitha K V
Department of Mathematics, Malnad College of Engineering, affiliated to Visvesvaraya Technological University Hassan – 573202, India
1 shared publication
Latest Publications
- Open Access
- 24 June 2026
- Published by Tulpar Academic Publishing in Challenge Journal of Concrete Research Letters
- Vol. 17 (2) , 122
Performance assessment of polypropylene fiber-reinforced engineered cementitious composites using experimental investigation and ANN modeling
The use of engineered cementitious composites (ECC) in structural repair and rehabilitation is becoming more and more common because of their strain-hardening behavior, controlled cracking, and better durability. Polypropylene fiber-reinforced ECC has even more benefits like being resistant to corrosion and saving money, however its mechanical performance is very much affected by the changes in mix composition and the amount of fiber used in the mix. The traditional approaches in mix design are mostly based on either carrying out large-scale experimental trials or using complex micromechanics-based formulations, which are both time-consuming and not very applicable in practice. On the other hand, although the use of Artificial Neural Networks (ANNs) for modeling the behavior of different cement-based materials has been successful, its use in the case of polypropylene fiber-reinforced ECC is still limited. The present study aims to develop an ANN-based predictive framework to predict compressive and flexural strength of polypropylene fiber-reinforced ECC by using the parameters of the mix design. A detailed experimental program with compressive strength and three-point bending tests was performed with different polypropylene fiber contents to study the ECC mixtures. ECC mixtures containing 0–2.0% PP fibers were experimentally tested at curing ages of 14, 28, and 56 days. The results indicate that an optimum PP fiber content of 1.5% yielded the highest mechanical performance, achieving compressive strengths of 31.95 MPa, 47.95 MPa, and 50.61 MPa, and corresponding flexural strengths of 13.41 MPa, 17.50 MPa, and 24.12 MPa at 14, 28, and 56 days, respectively. For making the model more robust and generally applicable, the experimental results were merged with the data from published literature that was carefully selected for ANN training and validation. An ANN model trained using 105 datasets (experimental and literature-based) demonstrated strong predictive capability, with coefficients of determination (R²) of 0.955 and 0.963 for compressive and flexural strength during training, and 0.953 and 0.975 during testing, respectively. The mean absolute percentage error remained below 8.2% for both strength parameters. The proposed model shows a very strong agreement between the values of strength predicted and those measured in the experiments, as it is able to capture the non-linear relationship between the composition of ECC and its mechanical performance. The framework that has been developed is a practical tool for the optimization of ECC mixes and assessment of their performance, particularly for applications involving the rehabilitation of buildings where accurate predictions and efficient design of materials are of utmost importance.
- 24 June 2026
- Published by Tulpar Academic Publishing in Challenge Journal of Concrete Research Letters
- Vol. 17 (2) , 122
Open AccessPerformance assessment of polypropylene fiber-reinforced engineered cementitious composites using experimental investigation and ANN modeling
The use of engineered cementitious composites (ECC) in structural repair and rehabilitation is becoming more and more common because of their strain-hardening behavior, controlled cracking, and better durability. Polypropylene fiber-reinforced ECC has even more benefits like being resistant to corrosion and saving money, however its mechanical performance is very much affected by the changes in mix composition and the amount of fiber used in the mix. The traditional approaches in mix design are mostly based on either carrying out large-scale experimental trials or using complex micromechanics-based formulations, which are both time-consuming and not very applicable in practice. On the other hand, although the use of Artificial Neural Networks (ANNs) for modeling the behavior of different cement-based materials has been successful, its use in the case of polypropylene fiber-reinforced ECC is still limited. The present study aims to develop an ANN-based predictive framework to predict compressive and flexural strength of polypropylene fiber-reinforced ECC by using the parameters of the mix design. A detailed experimental program with compressive strength and three-point bending tests was performed with different polypropylene fiber contents to study the ECC mixtures. ECC mixtures containing 0–2.0% PP fibers were experimentally tested at curing ages of 14, 28, and 56 days. The results indicate that an optimum PP fiber content of 1.5% yielded the highest mechanical performance, achieving compressive strengths of 31.95 MPa, 47.95 MPa, and 50.61 MPa, and corresponding flexural strengths of 13.41 MPa, 17.50 MPa, and 24.12 MPa at 14, 28, and 56 days, respectively. For making the model more robust and generally applicable, the experimental results were merged with the data from published literature that was carefully selected for ANN training and validation. An ANN model trained using 105 datasets (experimental and literature-based) demonstrated strong predictive capability, with coefficients of determination (R²) of 0.955 and 0.963 for compressive and flexural strength during training, and 0.953 and 0.975 during testing, respectively. The mean absolute percentage error remained below 8.2% for both strength parameters. The proposed model shows a very strong agreement between the values of strength predicted and those measured in the experiments, as it is able to capture the non-linear relationship between the composition of ECC and its mechanical performance. The framework that has been developed is a practical tool for the optimization of ECC mixes and assessment of their performance, particularly for applications involving the rehabilitation of buildings where accurate predictions and efficient design of materials are of utmost importance.
- Open Access
- 15 June 2026
- Published by AMG Transcend Association in Biointerface Research in Applied Chemistry
- Vol. 16 (3)
M-Polynomial Driven QSPR Modeling for Mechanical Characteristics of Single-Layer Borophene Nanosheets
Borophene, with its outstanding mechanical and electronic properties, is a promising material for advanced technological applications. This work applies concepts from chemical graph theory to examine five single-layered borophene nanosheets by deriving their M-polynomials and computing various Degree-based Topological Indices (DBTI). These indices are correlated with key mechanical properties - Young’s modulus, Poisson’s ratio, strain at ultimate tensile strength, and ultimate tensile strength. Further linear, quadratic, cubic, exponential, and logarithmic regression models were examined, and based on the coefficient of determination (R2) value, the most appropriate model was identified. Thus, the study demonstrates that M-polynomial–based descriptors offer an efficient and reliable framework for predicting the mechanical behavior of borophene nanosheets.
- 15 June 2026
- Published by AMG Transcend Association in Biointerface Research in Applied Chemistry
- Vol. 16 (3)
Open AccessM-Polynomial Driven QSPR Modeling for Mechanical Characteristics of Single-Layer Borophene Nanosheets
Borophene, with its outstanding mechanical and electronic properties, is a promising material for advanced technological applications. This work applies concepts from chemical graph theory to examine five single-layered borophene nanosheets by deriving their M-polynomials and computing various Degree-based Topological Indices (DBTI). These indices are correlated with key mechanical properties - Young’s modulus, Poisson’s ratio, strain at ultimate tensile strength, and ultimate tensile strength. Further linear, quadratic, cubic, exponential, and logarithmic regression models were examined, and based on the coefficient of determination (R2) value, the most appropriate model was identified. Thus, the study demonstrates that M-polynomial–based descriptors offer an efficient and reliable framework for predicting the mechanical behavior of borophene nanosheets.
- Open Access
Prediction of Shear Strength of Steel Fiber-Reinforced Concrete Beams with Stirrups Using Hybrid Machine Learning and Deep Learning Models
The shear behavior of beams cast with steel fiber reinforced concrete and provided with stirrups is a complex phenomenon that depends on various factors. In the present research effort, a hybrid support vector regression model combined with a particle swarm optimization algorithm is provided, to explore the relationship between the material and dimensional characteristics of a concrete beam and its shear strength. A database with diverse material properties associated with the shear strength of a steel fiber reinforced concrete beam was established from numerous reliable published research articles and was utilized for the development and evaluation of the model. The obtained results from the hybrid support vector regression model were then validated through the results of the artificial neural network and convolutional neural network models combined with the particle swarm optimization algorithm. In conclusion, the adopted hybrid support vector regression approach was proven to be a successful engineering technique that can be used in structural and construction engineering problems.
Open AccessPrediction of Shear Strength of Steel Fiber-Reinforced Concrete Beams with Stirrups Using Hybrid Machine Learning and Deep Learning Models
The shear behavior of beams cast with steel fiber reinforced concrete and provided with stirrups is a complex phenomenon that depends on various factors. In the present research effort, a hybrid support vector regression model combined with a particle swarm optimization algorithm is provided, to explore the relationship between the material and dimensional characteristics of a concrete beam and its shear strength. A database with diverse material properties associated with the shear strength of a steel fiber reinforced concrete beam was established from numerous reliable published research articles and was utilized for the development and evaluation of the model. The obtained results from the hybrid support vector regression model were then validated through the results of the artificial neural network and convolutional neural network models combined with the particle swarm optimization algorithm. In conclusion, the adopted hybrid support vector regression approach was proven to be a successful engineering technique that can be used in structural and construction engineering problems.
- Open Access
- 29 August 2024
- Published by MDPI AG in Mathematics
- Vol. 12 (17) , 2699
The Degree Energy of a Graph
The incidence of edges on vertices is a cornerstone of graph theory, with profound implications for various graph properties and applications. Understanding degree distributions and their implications is crucial for analyzing and modeling real-world networks. This study investigates the impact of vertex degree distribution on the energy landscape of graphs in network theory. By analyzing how vertex connectivity influences graph energy, the research enhances the understanding of network structure and dynamics. It establishes important properties and sharp bounds related to degree spectra and degree energy. Furthermore, the study determines the degree spectra and degree energy for several key families of graphs, providing valuable insights with potential applications across various fields.
- 29 August 2024
- Published by MDPI AG in Mathematics
- Vol. 12 (17) , 2699
Open AccessThe Degree Energy of a Graph
The incidence of edges on vertices is a cornerstone of graph theory, with profound implications for various graph properties and applications. Understanding degree distributions and their implications is crucial for analyzing and modeling real-world networks. This study investigates the impact of vertex degree distribution on the energy landscape of graphs in network theory. By analyzing how vertex connectivity influences graph energy, the research enhances the understanding of network structure and dynamics. It establishes important properties and sharp bounds related to degree spectra and degree energy. Furthermore, the study determines the degree spectra and degree energy for several key families of graphs, providing valuable insights with potential applications across various fields.