ALAlexandru Nicolae Luca

Alexandru Nicolae Luca

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alexandru Nicolae Luca has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Cavitation Erosion of the Biodegradable AM50 Alloy After Artificial Aging Heat Treatment

    by Ilare Bordeasu, Dorin Bordeasu, Lavinia-Madalina Micu, Filip-Sebastian Tatu, Nicusor-Alin Sirbu, Radu-Nicolae Popescu, Cristian Ghera, Liviu-Daniel Pirvulescu, Alexandru-Nicolae Luca, Brandusa Ghiban, et al.

    Magnesium-based alloys remain poorly researched, particularly regarding their behavior and resistance under hydrodynamic loading conditions. Interest in these materials is driven by their low density, lower even than that of aluminum alloys, and their excellent pressure die-casting capability, leading to manufacturing components with high geometric accuracy and structural homogeneity. Due to their biodegradability and biocompatibility, recent research has focused on using them in reconstructive surgery devices, similar to Zn-Mg alloys. As the blood circulatory system can, at certain stages, be considered similar to a hydraulic system, it is subjected to hydrodynamic flow regimes, including cavitation erosion. In this context, the current research, conducted on the AM50 magnesium-based alloy, provides new insights into its behavior and structural resistance exposed to shock waves and microjets generated by cavitation. Cavitation tests were performed using a standard 20 kHz vibratory device on three material conditions: one semi-finished (initial) state and two aged, heat-treated states at 200 °C for 12 and 24 h. Analyses of the characteristic erosion curves, cavitation resistance parameters, and macro- and microstructural examinations of the eroded surfaces revealed that, compared with the semi-finished condition, the applied heat-treatment regimes increased the HV5 hardness by 6.8–17% and the cavitation resistance by 27–61%.


  • The Cavitation Behavior of the 6082 Alloy Aluminium Structure Obtained by WIG Remelted

    by Ilare Bordeasu, Robert Parmanche, Cristian Ghera, Cornelia Laura Salcianu, Alin Nicuşor Sîrbu, Nicolae Alexandru Luca, Iuliana Duma, Sebastian Titus Duma, Corneliu Eusebiu Podoleanu

    Aluminum alloy 6082 is known for its use in the manufacture of structures that require welding interventions, high mechanical properties, resistance to pressure and corrosion, such as: boilers, truck structures, bicycles and motor boats. The recent research, regarding the cavitation resistance of the this alloy structure, shows a poor behavior of the semi-finished structure and somewhat improved by artificial aging volumetric heat treatment regimes. On the line of increasing the resistance of the this alloy structure, to the erosive demands of cavitation, they sign up of the rechearch results of the this paper, regarding the behavior and resistance of the vibratory cavitation of the aluminum alloy 6082 structure , obtained by WIG remelting. Comparing with the results obtained on the structures in the semi-finished state and through volume thermal treatments of artificial aging state, using the established parameters, recommended by the ASTM G32-2016 norms, a significant increase in the resistance to cyclic cavitation stresses is found, as a result of the increase in the surface hardness value. The novelty of the work consists in motivating the use of the remelting procedure of the surface structure of aluminum alloy 6082, through WIG remelting in order to increase the surface hardness, with a direct effect on increasing this structure resistance to the cyclical fatigue stresses of shock waves and microjets developed through the hydrodynamic mechanism of cavitation.

  • The Research of the Cavitation Erosion Resistance of the Aluminium Alloy 2017 a Structure Obtained by WIG Remelted

    by Ilare Bordeasu, Alexandru Nicolae Luca, Robert Parmanche, Cristian Ghera, Cornelia Laura Salcianu, Lavinia Madalina Micu, Daniel Ostoia, Iuliana Duma, Voicu Ioan Safta

    The paper presents the results of the behavior and resistance to the erosion by cavitation of the 2017 A aluminium alloy structure, obtained by the WIG remelted method. The research is in step with the new directions of study and aims to extend the aluminum alloy 2017 A to the manufacture of parts that work in the cavitation regime, such as: pistons and valves of thermal engines, respectively various pump rotors or motor boat propellers. The analysis performed on the basis of the specific curves, constructed according to the indications of the ASTM G32-2016 normas, shows that structure, obtained by the WIG remelting, confers a constant behavior to the cyclic stresses of microjets generated by the hydrodynamics of the vibratory cavitation. The comparison of the results, based on the specific parameters, used in the laboratory and indicated by the ASTM G32-2016 norms shows a resistance to cavitation erosion, clearly superior to the semi-finished structure and those obtained by artificial aging heat treatment at 1800C and 120 0C, with duration of one hour.

  • Air-Dynamic Measurements on “S” Shape Hydrofoils

    by Adriana-Sida Manea, Daniel-Catalin Stroita, Ilare Bordeasu, Cristian Ghera, Alexandru-Nicolae Luca


  • Investigation of Cavitation Resistance of Biocompatible Zinc-Based Alloys for Biomedical Applications

    by Ilare Bordeasu, Cristian Ghera, Alexandru-Nicolae Luca, Adriana-Sida Manea, Daniel-Catalin Stroita, Cornelia Laura Salcianu, Brandusa Ghiban, Lavinia Madalina Micu


  • Research on the Cavitation Resistance Testing of Friction Stir Welded Joint of Cu99 Cooper

    by Cristian-Vladimir Besalic, Alexandru Nicolae Luca, Gabriela-Victoria Mnerie, Lia-Nicoleta Botila, Cristan Ghera, Rodica Bădărău

    In many different industries, cavitation-induced erosion and damage to engineering parts have been a major problem. This is especially true when it comes to fluid systems. Modern materials and welding methods are always being researched to improve the components' resistance to cavitation damage as a way to address this problem. This study examines the cavitation resistance of friction stir welded joints made of high-purity copper alloy Cu99, which has promising mechanical qualities. The project entails the creation of friction stir welded joints made of Cu99 copper, followed by extensive testing to see how well they resist erosion caused by cavitation. A cavitation testing device is used for the testing, simulating the circumstances that can cause cavitation damage to fluid systems in the actual world. The cavitation intensity, exposure time, and temperature changes are the relevant parameters. The performance and longevity of the friction stir welded joints under cavitation conditions are assessed using the experimental results. Investigations are conducted into the effect of post-weld heat treatment, grain boundary features, and microstructural changes in improving cavitation resistance. The goal of the study is to offer important new information on friction stir welding's potential as a method for raising the cavitation resistance of Cu99 copper components.

  • Considerations on the Behaviour and Resistance of Aluminium Alloys to Cavitation Erosion

    by Ilare Bordeasu, Alexandru Nicolae Luca, Cristan Ghera, Cornelia Laura Salcianu, Daniel Ostoia, Lavinia Madalina Micu

    Aluminum alloys are known for their wide application in the automotive, river and marine boat constructions, but also in hydraulic systems (radiators/oil coolers). Their use is made by manufacturing parts directly from the semi-finished state, with or without certain volumetric heat treatments and surface hardening, depending on the functional role and the physical-mechanical characteristics pursued. Some of these parts work in hydrodynamic conditions, where cavitation manifests itself through erosion, such as: propellers of boats and barges, pump rotors in water cooling systems of automobiles. Visual analyzes performed on sailboat and powerboat propellers, after identical durations and operating conditions, showed cavitation erosion damage, different depending on the type of aluminum alloy. As a result, the paper presents and analyzes the behavior and resistance to erosion by vibratory cavitation of 4 types of aluminum alloys in the state of rolled semi-finished products. To highlight the differences in the destruction of structures under the cyclic stresses of cavitational microjets, macro and microscopic images of the eroded structure are used, as well as the curves with the values of the parameters specific to cavitation, recommended by the ASTM G32 -2016 norms and used in the research laboratory's custom. The analysis of the results shows that the resistance of the structure to cavitation erosion is dependent on the type of alloy, the degree of brittle intermetallic compounds and the mechanical properties specific to toughness.

  • Research on the Cavitation Resistance Testing of Friction Stir Welded Joint of En Aw 1200 Aluminium Alloy

    by Cristian-Vladimir Besalic, Alexandru Nicolae Luca, Gabriela-Victoria Mnerie, Lia-Nicoleta Botila, Cristan Ghera, Rodica Bădărău

    Aluminium alloys are being used more often as a result of industry demands for strong, lightweight materials. Because of its advantages over conventional fusion welding techniques, friction stir welding, or FSW, has become a promising technique for joining aluminium alloys. Nonetheless, there is still cause for concern regarding FSW joints' vulnerability to cavitation erosion, which is a major issue in applications exposed to harsh environments. The cavitation resistance of EN AW 1200 aluminium alloy joints made by the FSW process is the main objective of this study. By utilizing specialized equipment to conduct cavitation tests, the study uses a comprehensive methodology to assess the cavitation erosion behaviour of these joints. A number of variables are investigated in order to determine how they affect the cavitation resistance of the welded joints, including mechanical attributes, welding parameters, and microstructural features. The goal of the study is to shed light on how well FSW joints function and hold up in cavitation scenarios. This information will be useful in improving the dependability and suitability of EN AW 1200 aluminium alloy in sectors where the ability to withstand cavitation erosion is critical. The findings from this study are expected to contribute to the optimization of welding parameters and material selection, ultimately advancing the use of aluminium alloys in critical applications requiring resistance to cavitation-induced damage.

  • Evaluating the Cavitation Erosion of 7075-T651 Aluminum Alloy Heat Treated by Artificial Aging at 140 °C for 12 Hours

    by Alexandru Nicolae Luca, Ilare Bordeasu, Lavinia Madalina Micu, Cristian Ghera, Rodica Bădărău, Cornelia Laura Salcianu, Daniel Ostoia, Mihai Hluscu, Nicuşor Alin Sîrbu

    Aluminum-based alloys, due to their high properties compared to pure aluminum, have expanded their use in building the aircraft strength structures, in the automotive construction and in the naval field. Some of these, such as the radome (aircraft nose) and the wings of the airplane, are exposed also to intense stress from the erosion created by the impact with the raindrops. The literature considers this type of damage to be assimilated by the erosion trough cavitation. Therefore, the paper presents the results of the behavior and resistance to erosion trough vibratory cavitation of the 7075 - T651 aluminum alloy structure, heat treated by artificial aging at 140 °C for 12 hours. The research has been carried out on a standard device that complies with the requirements described in ASTM G32-2016. The structure strength obtained through the researched heat treatment, is evaluated through comparison with the state obtained by artificial aging at 180 °C with a similar duration of 12 hours. The evaluation is done by comparing the parameters recommended by the ASTM G32-2016 norms of the two heat treatments. The results show that the achieved gain is slightly increased.


  • Research on the Influence of the Heat Treatment Temperature on the Cavitation Behavior of the Aluminum Alloy 2017 A

    by Cornelia Laura Salcianu, Ilare Bordeasu, Brandusa Ghiban, Nicuşor Alin Sîrbu, Cristian Ghera, Alexandru Nicolae Luca, Ovidiu Odagiu, Rodica Bădărău

    The good mechanical properties of aluminum alloy 2017 A have determined its use in a wide range of applications in which cavitational solocitations occur, such as hydraulic actuation installations, heat engine blocks, boat propellers and sloops, pumps in the cooling system of thermal engines, wings and ogives of airplanes. Currently, research is focused on the development of procedures for improving the resistance to cavitational erosion of these materials. This paper presents the results of the research on the cavitation erosion behavior of the material subjected to thermal aging treatment at different temperatures of 140 °C and 180 °C respectively and a constant holding time of 12 hours. The research was carried out according to the ASTM G32-2016 norms, on a vibrating device with piezoceramic crystals from the Cavitation Laboratory of the Polytechnic University of Timisoara. The research results, based on characteristic curves, mechanical properties, micro and macro structural images, showed that the sample kept for 12 h at a temperature of 180 °C is weaker than the control sample, during the sample time kept for 12 h at a temperature of 140 °C, has a small increase, even if, compared to the control sample (without heat treatment), the hardness is lower.