Qiang Luan
Qiang Luan has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Bing Wang
School of Mechanical Engineering, Shandong University, Jinan, PR China
1 shared publication Haoyu Zhao
1 shared publicationHongxin Wang
Moon Environment Technology Co., Ltd. , Yantai 264002 , China
1 shared publicationJinyuan Liu
1 shared publication- Longxu Yao
Shandong University School of Mechanical Engineering, State Key Laboratory of Advanced Equipment and Technology for Metal Forming Jinan 250061 , China
1 shared publication Mingbo Liu
1 shared publication
Latest Publications
- Open Access
- 22 October 2026
- Published by Tsinghua University Press in Nano Research
- Vol. 20 (1)
Multifunctional SiO 2 -wrapped CNFs@NiFe 2 O 4 nanocomposites for excellent electromagnetic wave absorption, hydrophobicity, and thermal insulation performance
The electromagnetic wave (EMW) absorbing materials used in harsh working environments are susceptible to thermal degradation and dielectric constant drift caused by humidity fluctuation, which severely restricts their practical applicable in aerospace, marine engineering and advanced electronics. Herein, a hierarchical nanoarchitecture consisting of silica-coated carbon nanofibers uniformly anchored with NiFe2O4 nanosheets (denoted as CFNOS) is fabricated via a combined electrospinning-hydrothermal-carbonization route. This ternary structural design circumvents the inherent drawbacks of pristine carbon nanofibers through synergistic dielectric and magnetic loss: NiFe2O4 introduces dominant magnetic loss, while the outer silica shell strengthens interfacial polarization to realize efficient EMW dissipation. The optimized CFNOS-2 delivers a minimum reflection loss (RLmin) of −59.10 dB at 1.68 mm, together with an effective absorption bandwidth (EAB) of 5.04 GHz at 1.60 mm, exceeding most previously reported carbon-based absorbers. Benefiting from the protective silica layer, CFNOS-2 possesses robust environmental adaptability, featuring a water contact angle of 139.1°, residual mass exceeding 80% upon heating to 800 °C, as well as favorable thermal insulation and infrared stealth performance (surface temperature maintained at 120 °C over 45 min). This work provides a facile structural strategy toward high-performance EMW absorbers applicable for extreme environments, paving a feasible route for next-generation stealth devices and high-density electronic packaging.
- 22 October 2026
- Published by Tsinghua University Press in Nano Research
- Vol. 20 (1)
Open AccessMultifunctional SiO 2 -wrapped CNFs@NiFe 2 O 4 nanocomposites for excellent electromagnetic wave absorption, hydrophobicity, and thermal insulation performance
The electromagnetic wave (EMW) absorbing materials used in harsh working environments are susceptible to thermal degradation and dielectric constant drift caused by humidity fluctuation, which severely restricts their practical applicable in aerospace, marine engineering and advanced electronics. Herein, a hierarchical nanoarchitecture consisting of silica-coated carbon nanofibers uniformly anchored with NiFe2O4 nanosheets (denoted as CFNOS) is fabricated via a combined electrospinning-hydrothermal-carbonization route. This ternary structural design circumvents the inherent drawbacks of pristine carbon nanofibers through synergistic dielectric and magnetic loss: NiFe2O4 introduces dominant magnetic loss, while the outer silica shell strengthens interfacial polarization to realize efficient EMW dissipation. The optimized CFNOS-2 delivers a minimum reflection loss (RLmin) of −59.10 dB at 1.68 mm, together with an effective absorption bandwidth (EAB) of 5.04 GHz at 1.60 mm, exceeding most previously reported carbon-based absorbers. Benefiting from the protective silica layer, CFNOS-2 possesses robust environmental adaptability, featuring a water contact angle of 139.1°, residual mass exceeding 80% upon heating to 800 °C, as well as favorable thermal insulation and infrared stealth performance (surface temperature maintained at 120 °C over 45 min). This work provides a facile structural strategy toward high-performance EMW absorbers applicable for extreme environments, paving a feasible route for next-generation stealth devices and high-density electronic packaging.
- 19 September 2024
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 146 (11) , 1-45
Debonding Fiber Damage Mechanism Modeling for Machining Damage Inhibition During Rotary Ultrasonic Face Grinding SiO2f/SiO2
The debonding fiber defects on the grinding surface of SiO2f/SiO2 ceramic matrix composites deteriorate the service performance of related components. The low-damage process window is the key information to suppress machining damage by controlling grinding parameters. A mechanism model for debonding fiber damage on SiO2f/SiO2 surface was firstly proposed in this paper by the large-deformation analysis for SiO2 fibers during rotary ultrasonic face grinding (RUFG). The established mechanism model built a bridge between grinding parameters and damage inhibition by integrating the ultrasonic stress effect, grinding force calculation, and critical fracture curvature cutting-off criterion of SiO2 fibers. The modeling mechanism for fiber deformation and fracture in grinding was validated by in-situ observation of single abrasive grit scratching experiments. Besides, the low debonding damage process window predicted by the model was verified by experimental results and could be adopted to suppress the debonding fiber damage in grinding. The affected mechanism of fiber orientation, ultrasonic amplitude, and fiber-matrix interface strength on the low debonding damage process window was analyzed based on the theoretical and experimental results. The damage inhibition effect of the RUFG process was limited by the low fiber-matrix interface strength and axial cutter-relieving movement component. The ultrasonic-assisted vibration exerted its auxiliary effects through the ultrasonic stress effect and force reduction effect. The prerequisite for exerting the damage inhibition effect of RUFG was that the fiber-matrix interface strength was sufficient to resist the negative influence of the ultrasonic stress effect.
- 19 September 2024
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 146 (11) , 1-45
Debonding Fiber Damage Mechanism Modeling for Machining Damage Inhibition During Rotary Ultrasonic Face Grinding SiO2f/SiO2
The debonding fiber defects on the grinding surface of SiO2f/SiO2 ceramic matrix composites deteriorate the service performance of related components. The low-damage process window is the key information to suppress machining damage by controlling grinding parameters. A mechanism model for debonding fiber damage on SiO2f/SiO2 surface was firstly proposed in this paper by the large-deformation analysis for SiO2 fibers during rotary ultrasonic face grinding (RUFG). The established mechanism model built a bridge between grinding parameters and damage inhibition by integrating the ultrasonic stress effect, grinding force calculation, and critical fracture curvature cutting-off criterion of SiO2 fibers. The modeling mechanism for fiber deformation and fracture in grinding was validated by in-situ observation of single abrasive grit scratching experiments. Besides, the low debonding damage process window predicted by the model was verified by experimental results and could be adopted to suppress the debonding fiber damage in grinding. The affected mechanism of fiber orientation, ultrasonic amplitude, and fiber-matrix interface strength on the low debonding damage process window was analyzed based on the theoretical and experimental results. The damage inhibition effect of the RUFG process was limited by the low fiber-matrix interface strength and axial cutter-relieving movement component. The ultrasonic-assisted vibration exerted its auxiliary effects through the ultrasonic stress effect and force reduction effect. The prerequisite for exerting the damage inhibition effect of RUFG was that the fiber-matrix interface strength was sufficient to resist the negative influence of the ultrasonic stress effect.