Rolando Donoso
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Rolando Donoso has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Klever Hernán Torres Rodríguez
Universidad Nacional de Chimborazo
1 shared publication - Leonardo Rentería
Universidad Nacional de Chimborazo
1 shared publication - Margarita Mayacela
Facultad de Ingeniería, Universidad Nacional de Chimborazo, Av. Antonio José de Sucre, Riobamba 060108, Ecuador
1 shared publication - Rodrigo Iván Acosta Lozada
Facultad de Ingeniería Civil y Mecánica, Universidad Técnica de Ambato, Ambato 180104, Ecuador
1 shared publication - Wladimir Ramírez
Faculty of Civil and Mechanical Engineering, Technical University of Ambato, Ambato 180207, Ecuador
1 shared publication
Latest Publications
- Open Access
- 31 August 2024
- Published by MDPI AG in Computation
- Vol. 12 (9) , 174
FPGA-Based Numerical Simulation of the Chaotic Synchronization of Chua Circuits
The objective of this work was to design and implement a system based on reconfigurable hardware as a study tool for the synchronization of chaotic circuits. Mathematical models were established for one circuit, two synchronized, and multiple synchronized Chua circuits. An ordinary differential equation solver was developed applying Euler’s method using the Verilog hardware description language and synthesized on a Spartan 3E FPGA (Field-Programmable Gate Array) equipped with a 32-bit RISC processor, 64 MB of DDR SDRAM, and 4 Mb of PROM. With a step size of 0.005 and a total of 10,000 iterations, the state equations for one and three Chua circuits were solved at a time of 0.2 ms and a frequency of 50 Mhz. The logical resources used by the system did not exceed 4%. To verify the operation, a numerical simulation was carried out using the Octave V9.1.0 calculation software on an Intel(R) Core i7-9750H CPU 2.59 GHz computer, obtaining the same results but in a time of 493 ms and 3.177 s for one and three circuits, respectively.
- 31 August 2024
- Published by MDPI AG in Computation
- Vol. 12 (9) , 174
Open AccessFPGA-Based Numerical Simulation of the Chaotic Synchronization of Chua Circuits
The objective of this work was to design and implement a system based on reconfigurable hardware as a study tool for the synchronization of chaotic circuits. Mathematical models were established for one circuit, two synchronized, and multiple synchronized Chua circuits. An ordinary differential equation solver was developed applying Euler’s method using the Verilog hardware description language and synthesized on a Spartan 3E FPGA (Field-Programmable Gate Array) equipped with a 32-bit RISC processor, 64 MB of DDR SDRAM, and 4 Mb of PROM. With a step size of 0.005 and a total of 10,000 iterations, the state equations for one and three Chua circuits were solved at a time of 0.2 ms and a frequency of 50 Mhz. The logical resources used by the system did not exceed 4%. To verify the operation, a numerical simulation was carried out using the Octave V9.1.0 calculation software on an Intel(R) Core i7-9750H CPU 2.59 GHz computer, obtaining the same results but in a time of 493 ms and 3.177 s for one and three circuits, respectively.